OVMS3-idf/components/esp32/include/xtensa/xdm-regs.h
2018-05-29 20:07:45 +08:00

530 lines
23 KiB
C

/* xdm-regs.h - Common register and related definitions for the XDM
(Xtensa Debug Module) */
/* Copyright (c) 2011-2012 Tensilica Inc.
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
#ifndef _XDM_REGS_H_
#define _XDM_REGS_H_
/* NOTE: This header file is included by C, assembler, and other sources.
So any C-specific or asm-specific content must be appropriately #ifdef'd. */
/*
* XDM registers can be accessed using APB, ERI, or JTAG (via NAR).
* Address offsets for APB and ERI are the same, and for JTAG
* is different (due to the limited 7-bit NAR addressing).
*
* Here, we first provide the constants as APB / ERI address offsets.
* This is necessary for assembler code (which accesses XDM via ERI),
* because complex conversion macros between the two address maps
* don't work in the assembler.
* Conversion macros are used to convert these to/from JTAG (NAR),
* addresses, for software using JTAG.
*/
/* FIXME: maybe provide only MISC+CS registers here, and leave specific
subsystem registers in separate headers? eg. for TRAX, PERF, OCD */
/* XDM_.... ERI addr [NAR addr] Description...... */
/* TRAX */
#define XDM_TRAX_ID 0x0000 /*[0x00] ID */
#define XDM_TRAX_CONTROL 0x0004 /*[0x01] Control */
#define XDM_TRAX_STATUS 0x0008 /*[0x02] Status */
#define XDM_TRAX_DATA 0x000C /*[0x03] Data */
#define XDM_TRAX_ADDRESS 0x0010 /*[0x04] Address */
#define XDM_TRAX_TRIGGER 0x0014 /*[0x05] Stop PC */
#define XDM_TRAX_MATCH 0x0018 /*[0x06] Stop PC Range */
#define XDM_TRAX_DELAY 0x001C /*[0x07] Post Stop Trigger Capture Size */
#define XDM_TRAX_STARTADDR 0x0020 /*[0x08] Trace Memory Start */
#define XDM_TRAX_ENDADDR 0x0024 /*[0x09] Trace Memory End */
#define XDM_TRAX_DEBUGPC 0x003C /*[0x0F] Debug PC */
#define XDM_TRAX_P4CHANGE 0x0040 /*[0x10] X */
#define XDM_TRAX_TIME0 0x0040 /*[0x10] First Time Register */
#define XDM_TRAX_P4REV 0x0044 /*[0x11] X */
#define XDM_TRAX_TIME1 0x0044 /*[0x11] Second Time Register */
#define XDM_TRAX_P4DATE 0x0048 /*[0x12] X */
#define XDM_TRAX_INTTIME_MAX 0x0048 /*[0x12] maximal Value of Timestamp IntTime */
#define XDM_TRAX_P4TIME 0x004C /*[0x13] X */
#define XDM_TRAX_PDSTATUS 0x0050 /*[0x14] Sample of PDebugStatus */
#define XDM_TRAX_PDDATA 0x0054 /*[0x15] Sample of PDebugData */
#define XDM_TRAX_STOP_PC 0x0058 /*[0x16] X */
#define XDM_TRAX_STOP_ICNT 0x005C /*[0x16] X */
#define XDM_TRAX_MSG_STATUS 0x0060 /*[0x17] X */
#define XDM_TRAX_FSM_STATUS 0x0064 /*[0x18] X */
#define XDM_TRAX_IB_STATUS 0x0068 /*[0x19] X */
#define XDM_TRAX_STOPCNT 0x006C /*[0x1A] X */
/* Performance Monitoring Counters */
#define XDM_PERF_PMG 0x1000 /*[0x20] perf. mon. global control register */
#define XDM_PERF_INTPC 0x1010 /*[0x24] perf. mon. interrupt PC */
#define XDM_PERF_PM0 0x1080 /*[0x28] perf. mon. counter 0 value */
#define XDM_PERF_PM1 0x1084 /*[0x29] perf. mon. counter 1 value */
#define XDM_PERF_PM2 0x1088 /*[0x2A] perf. mon. counter 2 value */
#define XDM_PERF_PM3 0x108C /*[0x2B] perf. mon. counter 3 value */
#define XDM_PERF_PM4 0x1090 /*[0x2C] perf. mon. counter 4 value */
#define XDM_PERF_PM5 0x1094 /*[0x2D] perf. mon. counter 5 value */
#define XDM_PERF_PM6 0x1098 /*[0x2E] perf. mon. counter 6 value */
#define XDM_PERF_PM7 0x109C /*[0x2F] perf. mon. counter 7 value */
#define XDM_PERF_PM(n) (0x1080+((n)<<2)) /* perfmon cnt n=0..7 value */
#define XDM_PERF_PMCTRL0 0x1100 /*[0x30] perf. mon. counter 0 control */
#define XDM_PERF_PMCTRL1 0x1104 /*[0x31] perf. mon. counter 1 control */
#define XDM_PERF_PMCTRL2 0x1108 /*[0x32] perf. mon. counter 2 control */
#define XDM_PERF_PMCTRL3 0x110C /*[0x33] perf. mon. counter 3 control */
#define XDM_PERF_PMCTRL4 0x1110 /*[0x34] perf. mon. counter 4 control */
#define XDM_PERF_PMCTRL5 0x1114 /*[0x35] perf. mon. counter 5 control */
#define XDM_PERF_PMCTRL6 0x1118 /*[0x36] perf. mon. counter 6 control */
#define XDM_PERF_PMCTRL7 0x111C /*[0x37] perf. mon. counter 7 control */
#define XDM_PERF_PMCTRL(n) (0x1100+((n)<<2)) /* perfmon cnt n=0..7 control */
#define XDM_PERF_PMSTAT0 0x1180 /*[0x38] perf. mon. counter 0 status */
#define XDM_PERF_PMSTAT1 0x1184 /*[0x39] perf. mon. counter 1 status */
#define XDM_PERF_PMSTAT2 0x1188 /*[0x3A] perf. mon. counter 2 status */
#define XDM_PERF_PMSTAT3 0x118C /*[0x3B] perf. mon. counter 3 status */
#define XDM_PERF_PMSTAT4 0x1190 /*[0x3C] perf. mon. counter 4 status */
#define XDM_PERF_PMSTAT5 0x1194 /*[0x3D] perf. mon. counter 5 status */
#define XDM_PERF_PMSTAT6 0x1198 /*[0x3E] perf. mon. counter 6 status */
#define XDM_PERF_PMSTAT7 0x119C /*[0x3F] perf. mon. counter 7 status */
#define XDM_PERF_PMSTAT(n) (0x1180+((n)<<2)) /* perfmon cnt n=0..7 status */
/* On-Chip-Debug (OCD) */
#define XDM_OCD_ID 0x2000 /*[0x40] ID register */
#define XDM_OCD_DCR_CLR 0x2008 /*[0x42] Debug Control reg clear */
#define XDM_OCD_DCR_SET 0x200C /*[0x43] Debug Control reg set */
#define XDM_OCD_DSR 0x2010 /*[0x44] Debug Status reg */
#define XDM_OCD_DDR 0x2014 /*[0x45] Debug Data reg */
#define XDM_OCD_DDREXEC 0x2018 /*[0x46] Debug Data reg + execute-DIR */
#define XDM_OCD_DIR0EXEC 0x201C /*[0x47] Debug Instruction reg, word 0 + execute-DIR */
#define XDM_OCD_DIR0 0x2020 /*[0x48] Debug Instruction reg, word 1 */
#define XDM_OCD_DIR1 0x2024 /*[0x49] Debug Instruction reg, word 2 */
#define XDM_OCD_DIR2 0x2028 /*[0x4A] Debug Instruction reg, word 3 */
#define XDM_OCD_DIR3 0x202C /*[0x49] Debug Instruction reg, word 4 */
#define XDM_OCD_DIR4 0x2030 /*[0x4C] Debug Instruction reg, word 5 */
#define XDM_OCD_DIR5 0x2034 /*[0x4D] Debug Instruction reg, word 5 */
#define XDM_OCD_DIR6 0x2038 /*[0x4E] Debug Instruction reg, word 6 */
#define XDM_OCD_DIR7 0x203C /*[0x4F] Debug Instruction reg, word 7 */
/* Miscellaneous Registers */
#define XDM_MISC_PWRCTL 0x3020 /*[0x58] Power and Reset Control */
#define XDM_MISC_PWRSTAT 0x3024 /*[0x59] Power and Reset Status */
#define XDM_MISC_ERISTAT 0x3028 /*[0x5A] ERI Transaction Status */
#define XDM_MISC_DATETIME 0x3034 /*[0x5D] [INTERNAL] Timestamps of build */
#define XDM_MISC_UBID 0x3038 /*[0x5E] [INTERNAL] Build Unique ID */
#define XDM_MISC_CID 0x303C /*[0x5F] [INTERNAL] Customer ID */
/* CoreSight compatibility */
#define XDM_CS_ITCTRL 0x3F00 /*[0x60] InTegration Mode control reg */
#define XDM_CS_CLAIMSET 0x3FA0 /*[0x68] Claim Tag Set reg */
#define XDM_CS_CLAIMCLR 0x3FA4 /*[0x69] Claim Tag Clear reg */
#define XDM_CS_LOCK_ACCESS 0x3FB0 /*[0x6B] Lock Access (writing 0xC5ACCE55 unlocks) */
#define XDM_CS_LOCK_STATUS 0x3FB4 /*[0x6D] Lock Status */
#define XDM_CS_AUTH_STATUS 0x3FB8 /*[0x6E] Authentication Status */
#define XDM_CS_DEV_ID 0x3FC8 /*[0x72] Device ID */
#define XDM_CS_DEV_TYPE 0x3FCC /*[0x73] Device Type */
#define XDM_CS_PER_ID4 0x3FD0 /*[0x74] Peripheral ID reg byte 4 */
#define XDM_CS_PER_ID5 0x3FD4 /*[0x75] Peripheral ID reg byte 5 */
#define XDM_CS_PER_ID6 0x3FD8 /*[0x76] Peripheral ID reg byte 6 */
#define XDM_CS_PER_ID7 0x3FDC /*[0x77] Peripheral ID reg byte 7 */
#define XDM_CS_PER_ID0 0x3FE0 /*[0x78] Peripheral ID reg byte 0 */
#define XDM_CS_PER_ID1 0x3FE4 /*[0x79] Peripheral ID reg byte 1 */
#define XDM_CS_PER_ID2 0x3FE8 /*[0x7A] Peripheral ID reg byte 2 */
#define XDM_CS_PER_ID3 0x3FEC /*[0x7B] Peripheral ID reg byte 3 */
#define XDM_CS_COMP_ID0 0x3FF0 /*[0x7C] Component ID reg byte 0 */
#define XDM_CS_COMP_ID1 0x3FF4 /*[0x7D] Component ID reg byte 1 */
#define XDM_CS_COMP_ID2 0x3FF8 /*[0x7E] Component ID reg byte 2 */
#define XDM_CS_COMP_ID3 0x3FFC /*[0x7F] Component ID reg byte 3 */
#define CS_PER_ID0 0x00000003
#define CS_PER_ID1 0x00000021
#define CS_PER_ID2 0x0000000f
#define CS_PER_ID3 0x00000000
#define CS_PER_ID4 0x00000024
#define CS_COMP_ID0 0x0000000d
#define CS_COMP_ID1 0x00000090
#define CS_COMP_ID2 0x00000005
#define CS_COMP_ID3 0x000000b1
#define CS_DEV_TYPE 0x00000015
#define XTENSA_IDCODE 0x120034e5 // FIXME (upper bits not spec. out but BE is !)
#define XTENSA_MFC_ID (XTENSA_IDCODE & 0xFFF)
#define CS_DEV_ID XTENSA_IDCODE
#define NXS_OCD_REG(val) ((val >= 0x40) && (val <= 0x5F))
#define NXS_TRAX_REG(val) val <= 0x3F
#define ERI_TRAX_REG(val) ((val & 0xFFFF) < 0x1000)
#define ERI_OCD_REG(val) ((val & 0xFFFF) >= 0x2000) && ((val & 0xFFFF) < 0x4000))
/* Convert above 14-bit ERI/APB address/offset to 7-bit NAR address: */
#define _XDM_ERI_TO_NAR(a) ( ((a)&0x3F80)==0x0000 ? (((a)>>2) & 0x1F) \
: ((a)&0x3E00)==0x1000 ? (0x20 | (((a)>>2) & 7) | (((a)>>4) & 0x18)) \
: ((a)&0x3FC0)==0x2000 ? (0x40 | (((a)>>2) & 0xF)) \
: ((a)&0x3FE0)==0x3020 ? (0x50 | (((a)>>2) & 0xF)) \
: ((a)&0x3FFC)==0x3F00 ? 0x60 \
: ((a)&0x3F80)==0x3F80 ? (0x60 | (((a)>>2) & 0x1F)) \
: -1 )
#define XDM_ERI_TO_NAR(a) _XDM_ERI_TO_NAR(a & 0xFFFF)
/* Convert 7-bit NAR address back to ERI/APB address/offset: */
#define _XDM_NAR_TO_APB(a) ((a) <= 0x1f ? ((a) << 2) \
:(a) >= 0x20 && (a) <= 0x3F ? (0x1000 | (((a)& 7) << 2) | (((a)&0x18)<<4)) \
:(a) >= 0x40 && (a) <= 0x4F ? (0x2000 | (((a)&0xF) << 2)) \
:(a) >= 0x58 && (a) <= 0x5F ? (0x3000 | (((a)&0xF) << 2)) \
:(a) == 0x60 ? (0x3F00) \
:(a) >= 0x68 && (a) <= 0x7F ? (0x3F80 | (((a)&0x1F) << 2)) \
: -1)
#define XDM_NAR_TO_APB(a) _XDM_NAR_TO_APB((a & 0xFFFF))
#define XDM_NAR_TO_ERI(a) _XDM_NAR_TO_APB((a & 0xFFFF)) | 0x000000
/* Convert APB to ERI address */
#define XDM_APB_TO_ERI(a) ((a) | (0x100000))
#define XDM_ERI_TO_APB(a) ((a) & (0x0FFFFF))
/*********** Bit definitions within some of the above registers ***********/
#define OCD_ID_LSDDRP 0x01000000
#define OCD_ID_LSDDRP_SHIFT 24
#define OCD_ID_ENDIANESS 0x00000001
#define OCD_ID_ENDIANESS_SHIFT 0
#define OCD_ID_PSO 0x0000000C
#define OCD_ID_PSO_SHIFT 2
#define OCD_ID_TRACEPORT 0x00000080
#define OCD_ID_TRACEPORT_SHIFT 7
/* Power Status register. NOTE: different bit positions in JTAG vs. ERI/APB !! */
/* ERI/APB: */
#define PWRSTAT_CORE_DOMAIN_ON 0x00000001 /* set if core is powered on */
#define PWRSTAT_CORE_DOMAIN_ON_SHIFT 0
#define PWRSTAT_WAKEUP_RESET 0x00000002 /* [ERI only] 0=cold start, 1=PSO wakeup */
#define PWRSTAT_WAKEUP_RESET_SHIFT 1
#define PWRSTAT_CACHES_LOST_POWER 0x00000004 /* [ERI only] set if caches (/localmems?) lost power */
/* FIXME: does this include local memories? */
#define PWRSTAT_CACHES_LOST_POWER_SHIFT 2
#define PWRSTAT_CORE_STILL_NEEDED 0x00000010 /* set if others keeping core awake */
#define PWRSTAT_CORE_STILL_NEEDED_SHIFT 4
#define PWRSTAT_MEM_DOMAIN_ON 0x00000100 /* set if memory domain is powered on */
#define PWRSTAT_MEM_DOMAIN_ON_SHIFT 8
#define PWRSTAT_DEBUG_DOMAIN_ON 0x00001000 /* set if debug domain is powered on */
#define PWRSTAT_DEBUG_DOMAIN_ON_SHIFT 12
#define PWRSTAT_ALL_ON PWRSTAT_CORE_DOMAIN_ON | PWRSTAT_MEM_DOMAIN_ON | PWRSTAT_DEBUG_DOMAIN_ON
#define PWRSTAT_CORE_WAS_RESET 0x00010000 /* [APB only] set if core got reset */
#define PWRSTAT_CORE_WAS_RESET_SHIFT 16
#define PWRSTAT_DEBUG_WAS_RESET 0x10000000 /* set if debug module got reset */
#define PWRSTAT_DEBUG_WAS_RESET_SHIFT 28
/* JTAG: */
#define J_PWRSTAT_CORE_DOMAIN_ON 0x01 /* set if core is powered on */
#define J_PWRSTAT_MEM_DOMAIN_ON 0x02 /* set if memory domain is powered on */
#define J_PWRSTAT_DEBUG_DOMAIN_ON 0x04 /* set if debug domain is powered on */
#define J_PWRSTAT_ALL_ON J_PWRSTAT_CORE_DOMAIN_ON | J_PWRSTAT_MEM_DOMAIN_ON | J_PWRSTAT_DEBUG_DOMAIN_ON
#define J_PWRSTAT_CORE_STILL_NEEDED 0x08 /* set if others keeping core awake */
#define J_PWRSTAT_CORE_WAS_RESET 0x10 /* set if core got reset */
#define J_PWRSTAT_DEBUG_WAS_RESET 0x40 /* set if debug module got reset */
/* Power Control register. NOTE: different bit positions in JTAG vs. ERI/APB !! */
/* ERI/APB: */
#define PWRCTL_CORE_SHUTOFF 0x00000001 /* [ERI only] core wants to shut off on WAITI */
#define PWRCTL_CORE_SHUTOFF_SHIFT 0
#define PWRCTL_CORE_WAKEUP 0x00000001 /* [APB only] set to force core to stay powered on */
#define PWRCTL_CORE_WAKEUP_SHIFT 0
#define PWRCTL_MEM_WAKEUP 0x00000100 /* set to force memory domain to stay powered on */
#define PWRCTL_MEM_WAKEUP_SHIFT 8
#define PWRCTL_DEBUG_WAKEUP 0x00001000 /* set to force debug domain to stay powered on */
#define PWRCTL_DEBUG_WAKEUP_SHIFT 12
#define PWRCTL_ALL_ON PWRCTL_CORE_WAKEUP | PWRCTL_MEM_WAKEUP | PWRCTL_DEBUG_WAKEUP
#define PWRCTL_CORE_RESET 0x00010000 /* [APB only] set to assert core reset */
#define PWRCTL_CORE_RESET_SHIFT 16
#define PWRCTL_DEBUG_RESET 0x10000000 /* set to assert debug module reset */
#define PWRCTL_DEBUG_RESET_SHIFT 28
/* JTAG: */
#define J_PWRCTL_CORE_WAKEUP 0x01 /* set to force core to stay powered on */
#define J_PWRCTL_MEM_WAKEUP 0x02 /* set to force memory domain to stay powered on */
#define J_PWRCTL_DEBUG_WAKEUP 0x04 /* set to force debug domain to stay powered on */
#define J_DEBUG_USE 0x80 /* */
#define J_PWRCTL_ALL_ON J_DEBUG_USE | J_PWRCTL_CORE_WAKEUP | J_PWRCTL_MEM_WAKEUP | J_PWRCTL_DEBUG_WAKEUP
#define J_PWRCTL_DEBUG_ON J_DEBUG_USE | J_PWRCTL_DEBUG_WAKEUP
#define J_PWRCTL_CORE_RESET 0x10 /* set to assert core reset */
#define J_PWRCTL_DEBUG_RESET 0x40 /* set to assert debug module reset */
#define J_PWRCTL_WRITE_MASK 0xFF
#define J_PWRSTAT_WRITE_MASK 0xFF
#define PWRCTL_WRITE_MASK ~0
#define PWRSTAT_WRITE_MASK ~0
/************ The following are only relevant for JTAG, so perhaps belong in OCD only **************/
/* XDM 5-bit JTAG Instruction Register (IR) values: */
#define XDM_IR_PWRCTL 0x08 /* select 8-bit Power/Reset Control (PRC) */
#define XDM_IR_PWRSTAT 0x09 /* select 8-bit Power/Reset Status (PRS) */
#define XDM_IR_NAR_SEL 0x1c /* select altern. 8-bit NAR / 32-bit NDR (Nexus-style) */
#define XDM_IR_NDR_SEL 0x1d /* select altern. 32-bit NDR / 8-bit NAR
(FIXME - functionality not yet in HW) */
#define XDM_IR_IDCODE 0x1e /* select 32-bit JTAG IDCODE */
#define XDM_IR_BYPASS 0x1f /* select 1-bit bypass */
#define XDM_IR_WIDTH 5 /* width of IR for Xtensa TAP */
/* NAR register bits: */
#define XDM_NAR_WRITE 0x01
#define XDM_NAR_ADDR_MASK 0xFE
#define XDM_NAR_ADDR_SHIFT 1
#define XDM_NAR_BUSY 0x02
#define XDM_NAR_ERROR 0x01
#define NEXUS_DIR_READ 0x00
#define NEXUS_DIR_WRITE 0x01
/************ Define DCR register bits **************/
#define DCR_ENABLEOCD 0x0000001
#define DCR_ENABLEOCD_SHIFT 0
#define DCR_DEBUG_INT 0x0000002
#define DCR_DEBUG_INT_SHIFT 1
#define DCR_DEBUG_OVERRIDE 0x0000004
#define DCR_DEBUG_OVERRIDE_SHIFT 2
#define DCR_DEBUG_INTERCEPT 0x0000008
#define DCR_DEBUG_INTERCEPT_SHIFT 3
#define DCR_MASK_NMI 0x0000020
#define DCR_MASK_NMI_SHIFT 5
#define DCR_STEP_ENABLE 0x0000040
#define DCR_STEP_ENABLE_SHIFT 6
#define DCR_BREAK_IN_EN 0x0010000
#define DCR_BREAK_IN_EN_SHIFT 16
#define DCR_BREAK_OUT_EN 0x0020000
#define DCR_BREAK_OUT_EN_SHIFT 17
#define DCR_DEBUG_INT_EN 0x0040000
#define DCR_DEBUG_INT_EN_SHIFT 18
#define DCR_DBG_SW_ACTIVE 0x0100000
#define DCR_DBG_SW_ACTIVE_SHIFT 20
#define DCR_STALL_IN_EN 0x0200000
#define DCR_STALL_IN_EN_SHIFT 21
#define DCR_DEBUG_OUT_EN 0x0400000
#define DCR_DEBUG_OUT_EN_SHIFT 22
#define DCR_BREAK_OUT_ITO 0x1000000
#define DCR_STALL_OUT_ITO 0x2000000
#define DCR_STALL_OUT_ITO_SHIFT 25
/************ Define DSR register bits **************/
#define DOSR_EXECDONE_ER 0x01
#define DOSR_EXECDONE_SHIFT 0
#define DOSR_EXCEPTION_ER 0x02
#define DOSR_EXCEPTION_SHIFT 1
#define DOSR_BUSY 0x04
#define DOSR_BUSY_SHIFT 2
#define DOSR_OVERRUN 0x08
#define DOSR_OVERRUN_SHIFT 3
#define DOSR_INOCDMODE_ER 0x10
#define DOSR_INOCDMODE_SHIFT 4
#define DOSR_CORE_WROTE_DDR_ER 0x400
#define DOSR_CORE_WROTE_DDR_SHIFT 10
#define DOSR_CORE_READ_DDR_ER 0x800
#define DOSR_CORE_READ_DDR_SHIFT 11
#define DOSR_HOST_WROTE_DDR_ER 0x4000
#define DOSR_HOST_WROTE_DDR_SHIFT 14
#define DOSR_HOST_READ_DDR_ER 0x8000
#define DOSR_HOST_READ_DDR_SHIFT 15
#define DOSR_DEBUG_PEND_BIN 0x10000
#define DOSR_DEBUG_PEND_HOST 0x20000
#define DOSR_DEBUG_PEND_TRAX 0x40000
#define DOSR_DEBUG_BIN 0x100000
#define DOSR_DEBUG_HOST 0x200000
#define DOSR_DEBUG_TRAX 0x400000
#define DOSR_DEBUG_PEND_BIN_SHIFT 16
#define DOSR_DEBUG_PEND_HOST_SHIFT 17
#define DOSR_DEBUG_PEND_TRAX_SHIFT 18
#define DOSR_DEBUG_BREAKIN 0x0100000
#define DOSR_DEBUG_BREAKIN_SHIFT 20
#define DOSR_DEBUG_HOST_SHIFT 21
#define DOSR_DEBUG_TRAX_SHIFT 22
#define DOSR_DEBUG_STALL 0x1000000
#define DOSR_DEBUG_STALL_SHIFT 24
#define DOSR_CORE_ON 0x40000000
#define DOSR_CORE_ON_SHIFT 30
#define DOSR_DEBUG_ON 0x80000000
#define DOSR_DEBUG_ON_SHIFT 31
/********** Performance monitor registers bits **********/
#define PERF_PMG_ENABLE 0x00000001 /* global enable bit */
#define PERF_PMG_ENABLE_SHIFT 0
#define PERF_PMCTRL_INT_ENABLE 0x00000001 /* assert interrupt on overflow */
#define PERF_PMCTRL_INT_ENABLE_SHIFT 0
#define PERF_PMCTRL_KRNLCNT 0x00000008 /* ignore TRACELEVEL */
#define PERF_PMCTRL_KRNLCNT_SHIFT 3
#define PERF_PMCTRL_TRACELEVEL 0x000000F0 /* count when CINTLEVEL <= TRACELEVEL */
#define PERF_PMCTRL_TRACELEVEL_SHIFT 4
#define PERF_PMCTRL_SELECT 0x00001F00 /* events group selector */
#define PERF_PMCTRL_SELECT_SHIFT 8
#define PERF_PMCTRL_MASK 0xFFFF0000 /* events mask */
#define PERF_PMCTRL_MASK_SHIFT 16
#define PERF_PMSTAT_OVERFLOW 0x00000001 /* counter overflowed */
#define PERF_PMSTAT_OVERFLOW_SHIFT 0
#define PERF_PMSTAT_INT 0x00000010 /* interrupt asserted */
#define PERF_PMSTAT_INT_SHIFT 4
#if defined (USE_XDM_REGNAME) || defined (USE_DAP_REGNAME)
/* Describes XDM register: */
typedef struct {
int reg;
char* name;
} regdef_t;
/*char* regname(regdef_t* list, int regno)
{
unsigned i;
for(i = 0 ; i < (sizeof(list) / sizeof(regdef_t)); i++){
if(list[i].reg == regno)
return list[i].name;
}
return "???";
}*/
/*
* Returns the name of the specified XDM register number,
* or simply "???" if the register number is not recognized.
* FIXME - requires -1 as the last entry - change to compare the name to ???
* or even better, make the code above to work.
*/
static char * regname(regdef_t* list, int reg)
{
int i = 0;
while (list[i].reg != -1){
if (list[i].reg == reg)
break;
i++;
}
return list[i].name;
}
#if defined (USE_XDM_REGNAME)
regdef_t xdm_reglist[] =
{
{XDM_TRAX_ID ,"TRAX_ID" },
{XDM_TRAX_CONTROL ,"CONTROL" },
{XDM_TRAX_STATUS ,"STATUS" },
{XDM_TRAX_DATA ,"DATA" },
{XDM_TRAX_ADDRESS ,"ADDRESS" },
{XDM_TRAX_TRIGGER ,"TRIGGER PC" },
{XDM_TRAX_MATCH ,"PC MATCH" },
{XDM_TRAX_DELAY ,"DELAY CNT." },
{XDM_TRAX_STARTADDR ,"START ADDRESS"},
{XDM_TRAX_ENDADDR ,"END ADDRESS" },
{XDM_TRAX_DEBUGPC ,"DEBUG PC" },
{XDM_TRAX_P4CHANGE ,"P4 CHANGE" },
{XDM_TRAX_P4REV ,"P4 REV." },
{XDM_TRAX_P4DATE ,"P4 DATE" },
{XDM_TRAX_P4TIME ,"P4 TIME" },
{XDM_TRAX_PDSTATUS ,"PD STATUS" },
{XDM_TRAX_PDDATA ,"PD DATA" },
{XDM_TRAX_STOP_PC ,"STOP PC" },
{XDM_TRAX_STOP_ICNT ,"STOP ICNT" },
{XDM_TRAX_MSG_STATUS ,"MSG STAT." },
{XDM_TRAX_FSM_STATUS ,"FSM STAT." },
{XDM_TRAX_IB_STATUS ,"IB STAT." },
{XDM_OCD_ID ,"OCD_ID" },
{XDM_OCD_DCR_CLR ,"DCR_CLR" },
{XDM_OCD_DCR_SET ,"DCR_SET" },
{XDM_OCD_DSR ,"DOSR" },
{XDM_OCD_DDR ,"DDR" },
{XDM_OCD_DDREXEC ,"DDREXEC" },
{XDM_OCD_DIR0EXEC ,"DIR0EXEC"},
{XDM_OCD_DIR0 ,"DIR0" },
{XDM_OCD_DIR1 ,"DIR1" },
{XDM_OCD_DIR2 ,"DIR2" },
{XDM_OCD_DIR3 ,"DIR3" },
{XDM_OCD_DIR4 ,"DIR4" },
{XDM_OCD_DIR5 ,"DIR5" },
{XDM_OCD_DIR6 ,"DIR6" },
{XDM_OCD_DIR7 ,"DIR7" },
{XDM_PERF_PMG ,"PMG" },
{XDM_PERF_INTPC ,"INTPC" },
{XDM_PERF_PM0 ,"PM0 " },
{XDM_PERF_PM1 ,"PM1 " },
{XDM_PERF_PM2 ,"PM2 " },
{XDM_PERF_PM3 ,"PM3 " },
{XDM_PERF_PM4 ,"PM4 " },
{XDM_PERF_PM5 ,"PM5 " },
{XDM_PERF_PM6 ,"PM6 " },
{XDM_PERF_PM7 ,"PM7 " },
{XDM_PERF_PMCTRL0 ,"PMCTRL0"},
{XDM_PERF_PMCTRL1 ,"PMCTRL1"},
{XDM_PERF_PMCTRL2 ,"PMCTRL2"},
{XDM_PERF_PMCTRL3 ,"PMCTRL3"},
{XDM_PERF_PMCTRL4 ,"PMCTRL4"},
{XDM_PERF_PMCTRL5 ,"PMCTRL5"},
{XDM_PERF_PMCTRL6 ,"PMCTRL6"},
{XDM_PERF_PMCTRL7 ,"PMCTRL7"},
{XDM_PERF_PMSTAT0 ,"PMSTAT0"},
{XDM_PERF_PMSTAT1 ,"PMSTAT1"},
{XDM_PERF_PMSTAT2 ,"PMSTAT2"},
{XDM_PERF_PMSTAT3 ,"PMSTAT3"},
{XDM_PERF_PMSTAT4 ,"PMSTAT4"},
{XDM_PERF_PMSTAT5 ,"PMSTAT5"},
{XDM_PERF_PMSTAT6 ,"PMSTAT6"},
{XDM_PERF_PMSTAT7 ,"PMSTAT7"},
{XDM_MISC_PWRCTL ,"PWRCTL" },
{XDM_MISC_PWRSTAT ,"PWRSTAT" },
{XDM_MISC_ERISTAT ,"ERISTAT" },
{XDM_MISC_DATETIME ,"DATETIME"},
{XDM_MISC_UBID ,"UBID" },
{XDM_MISC_CID ,"CID" },
{XDM_CS_ITCTRL ,"ITCTRL" },
{XDM_CS_CLAIMSET ,"CLAIMSET" },
{XDM_CS_CLAIMCLR ,"CLAIMCLR" },
{XDM_CS_LOCK_ACCESS ,"LOCK_ACCESS"},
{XDM_CS_LOCK_STATUS ,"LOCK_STATUS"},
{XDM_CS_AUTH_STATUS ,"AUTH_STATUS"},
{XDM_CS_DEV_ID ,"DEV_ID" },
{XDM_CS_DEV_TYPE ,"DEV_TYPE" },
{XDM_CS_PER_ID4 ,"PER_ID4" },
{XDM_CS_PER_ID5 ,"PER_ID5" },
{XDM_CS_PER_ID6 ,"PER_ID6" },
{XDM_CS_PER_ID7 ,"PER_ID7" },
{XDM_CS_PER_ID0 ,"PER_ID0" },
{XDM_CS_PER_ID1 ,"PER_ID1" },
{XDM_CS_PER_ID2 ,"PER_ID2" },
{XDM_CS_PER_ID3 ,"PER_ID3" },
{XDM_CS_COMP_ID0 ,"COMP_ID0" },
{XDM_CS_COMP_ID1 ,"COMP_ID1" },
{XDM_CS_COMP_ID2 ,"COMP_ID2" },
{XDM_CS_COMP_ID3 ,"COMP_ID3" },
{-1 ,"???" },
};
#endif
#endif
#endif /* _XDM_REGS_H_ */