8f80cc733d
When two CPUs read the area of the DPORT and the area of the APB, the result is corrupted for the CPU that read the APB area. And another CPU has valid data. The method of eliminating this error. Before reading the registers of the DPORT, make a preliminary reading of the APB register. In this case, the joint access of the two CPUs to the registers of the APB and the DPORT is successful.
303 lines
8.4 KiB
C
303 lines
8.4 KiB
C
/*
|
|
* ESP32 hardware accelerated SHA1/256/512 implementation
|
|
* based on mbedTLS FIPS-197 compliant version.
|
|
*
|
|
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
|
|
* Additions Copyright (C) 2016, Espressif Systems (Shanghai) PTE Ltd
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
|
* not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
*/
|
|
/*
|
|
* The SHA-1 standard was published by NIST in 1993.
|
|
*
|
|
* http://www.itl.nist.gov/fipspubs/fip180-1.htm
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include <stdio.h>
|
|
#include <sys/lock.h>
|
|
#include <byteswap.h>
|
|
#include <assert.h>
|
|
|
|
#include "hwcrypto/sha.h"
|
|
#include "rom/ets_sys.h"
|
|
#include "soc/dport_reg.h"
|
|
#include "soc/hwcrypto_reg.h"
|
|
|
|
inline static uint32_t SHA_LOAD_REG(esp_sha_type sha_type) {
|
|
return SHA_1_LOAD_REG + sha_type * 0x10;
|
|
}
|
|
|
|
inline static uint32_t SHA_BUSY_REG(esp_sha_type sha_type) {
|
|
return SHA_1_BUSY_REG + sha_type * 0x10;
|
|
}
|
|
|
|
inline static uint32_t SHA_START_REG(esp_sha_type sha_type) {
|
|
return SHA_1_START_REG + sha_type * 0x10;
|
|
}
|
|
|
|
inline static uint32_t SHA_CONTINUE_REG(esp_sha_type sha_type) {
|
|
return SHA_1_CONTINUE_REG + sha_type * 0x10;
|
|
}
|
|
|
|
/* Single lock for SHA engine memory block
|
|
*/
|
|
static _lock_t memory_block_lock;
|
|
|
|
typedef struct {
|
|
_lock_t lock;
|
|
bool in_use;
|
|
} sha_engine_state;
|
|
|
|
/* Pointer to state of each concurrent SHA engine.
|
|
|
|
Indexes:
|
|
0 = SHA1
|
|
1 = SHA2_256
|
|
2 = SHA2_384 or SHA2_512
|
|
*/
|
|
static sha_engine_state engine_states[3];
|
|
|
|
/* Index into the sha_engine_state array */
|
|
inline static size_t sha_engine_index(esp_sha_type type) {
|
|
switch(type) {
|
|
case SHA1:
|
|
return 0;
|
|
case SHA2_256:
|
|
return 1;
|
|
default:
|
|
return 2;
|
|
}
|
|
}
|
|
|
|
/* Return digest length (in bytes) for a given SHA type */
|
|
inline static size_t sha_length(esp_sha_type type) {
|
|
switch(type) {
|
|
case SHA1:
|
|
return 20;
|
|
case SHA2_256:
|
|
return 32;
|
|
case SHA2_384:
|
|
return 48;
|
|
case SHA2_512:
|
|
return 64;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* Return block size (in bytes) for a given SHA type */
|
|
inline static size_t block_length(esp_sha_type type) {
|
|
switch(type) {
|
|
case SHA1:
|
|
case SHA2_256:
|
|
return 64;
|
|
case SHA2_384:
|
|
case SHA2_512:
|
|
return 128;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
void esp_sha_lock_memory_block(void)
|
|
{
|
|
_lock_acquire(&memory_block_lock);
|
|
}
|
|
|
|
void esp_sha_unlock_memory_block(void)
|
|
{
|
|
_lock_release(&memory_block_lock);
|
|
}
|
|
|
|
/* Lock to hold when changing SHA engine state,
|
|
allows checking of sha_engines_all_idle()
|
|
*/
|
|
static _lock_t state_change_lock;
|
|
|
|
inline static bool sha_engines_all_idle() {
|
|
return !engine_states[0].in_use
|
|
&& !engine_states[1].in_use
|
|
&& !engine_states[2].in_use;
|
|
}
|
|
|
|
static void esp_sha_lock_engine_inner(sha_engine_state *engine);
|
|
|
|
bool esp_sha_try_lock_engine(esp_sha_type sha_type)
|
|
{
|
|
sha_engine_state *engine = &engine_states[sha_engine_index(sha_type)];
|
|
if(_lock_try_acquire(&engine->lock) != 0) {
|
|
/* This SHA engine is already in use */
|
|
return false;
|
|
} else {
|
|
esp_sha_lock_engine_inner(engine);
|
|
return true;
|
|
}
|
|
}
|
|
|
|
void esp_sha_lock_engine(esp_sha_type sha_type)
|
|
{
|
|
sha_engine_state *engine = &engine_states[sha_engine_index(sha_type)];
|
|
_lock_acquire(&engine->lock);
|
|
esp_sha_lock_engine_inner(engine);
|
|
}
|
|
|
|
static void esp_sha_lock_engine_inner(sha_engine_state *engine)
|
|
{
|
|
_lock_acquire(&state_change_lock);
|
|
|
|
if (sha_engines_all_idle()) {
|
|
/* Enable SHA hardware */
|
|
DPORT_REG_SET_BIT(DPORT_PERI_CLK_EN_REG, DPORT_PERI_EN_SHA);
|
|
/* also clear reset on secure boot, otherwise SHA is held in reset */
|
|
DPORT_REG_CLR_BIT(DPORT_PERI_RST_EN_REG,
|
|
DPORT_PERI_EN_SHA
|
|
| DPORT_PERI_EN_SECUREBOOT);
|
|
DPORT_STALL_OTHER_CPU_START();
|
|
ets_sha_enable();
|
|
DPORT_STALL_OTHER_CPU_END();
|
|
}
|
|
|
|
assert( !engine->in_use && "in_use flag should be cleared" );
|
|
engine->in_use = true;
|
|
|
|
_lock_release(&state_change_lock);
|
|
}
|
|
|
|
|
|
void esp_sha_unlock_engine(esp_sha_type sha_type)
|
|
{
|
|
sha_engine_state *engine = &engine_states[sha_engine_index(sha_type)];
|
|
|
|
_lock_acquire(&state_change_lock);
|
|
|
|
assert( engine->in_use && "in_use flag should be set" );
|
|
engine->in_use = false;
|
|
|
|
if (sha_engines_all_idle()) {
|
|
/* Disable SHA hardware */
|
|
/* Don't assert reset on secure boot, otherwise AES is held in reset */
|
|
DPORT_REG_SET_BIT(DPORT_PERI_RST_EN_REG, DPORT_PERI_EN_SHA);
|
|
DPORT_REG_CLR_BIT(DPORT_PERI_CLK_EN_REG, DPORT_PERI_EN_SHA);
|
|
}
|
|
|
|
_lock_release(&state_change_lock);
|
|
|
|
_lock_release(&engine->lock);
|
|
}
|
|
|
|
void esp_sha_wait_idle(void)
|
|
{
|
|
while(1) {
|
|
if(DPORT_REG_READ(SHA_1_BUSY_REG) == 0
|
|
&& DPORT_REG_READ(SHA_256_BUSY_REG) == 0
|
|
&& DPORT_REG_READ(SHA_384_BUSY_REG) == 0
|
|
&& DPORT_REG_READ(SHA_512_BUSY_REG) == 0) {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void esp_sha_read_digest_state(esp_sha_type sha_type, void *digest_state)
|
|
{
|
|
sha_engine_state *engine = &engine_states[sha_engine_index(sha_type)];
|
|
assert(engine->in_use && "SHA engine should be locked" );
|
|
|
|
esp_sha_lock_memory_block();
|
|
|
|
esp_sha_wait_idle();
|
|
|
|
DPORT_REG_WRITE(SHA_LOAD_REG(sha_type), 1);
|
|
while(DPORT_REG_READ(SHA_BUSY_REG(sha_type)) == 1) { }
|
|
uint32_t *digest_state_words = (uint32_t *)digest_state;
|
|
uint32_t *reg_addr_buf = (uint32_t *)(SHA_TEXT_BASE);
|
|
if(sha_type == SHA2_384 || sha_type == SHA2_512) {
|
|
/* for these ciphers using 64-bit states, swap each pair of words */
|
|
DPORT_INTERRUPT_DISABLE(); // Disable interrupt only on current CPU.
|
|
for(int i = 0; i < sha_length(sha_type)/4; i += 2) {
|
|
digest_state_words[i+1] = DPORT_SEQUENCE_REG_READ((uint32_t)®_addr_buf[i]);
|
|
digest_state_words[i] = DPORT_SEQUENCE_REG_READ((uint32_t)®_addr_buf[i+1]);
|
|
}
|
|
DPORT_INTERRUPT_RESTORE(); // restore the previous interrupt level
|
|
} else {
|
|
esp_dport_access_read_buffer(digest_state_words, (uint32_t)®_addr_buf[0], sha_length(sha_type)/4);
|
|
}
|
|
esp_sha_unlock_memory_block();
|
|
}
|
|
|
|
void esp_sha_block(esp_sha_type sha_type, const void *data_block, bool is_first_block)
|
|
{
|
|
sha_engine_state *engine = &engine_states[sha_engine_index(sha_type)];
|
|
assert(engine->in_use && "SHA engine should be locked" );
|
|
|
|
esp_sha_lock_memory_block();
|
|
|
|
esp_sha_wait_idle();
|
|
|
|
/* Fill the data block */
|
|
uint32_t *reg_addr_buf = (uint32_t *)(SHA_TEXT_BASE);
|
|
uint32_t *data_words = (uint32_t *)data_block;
|
|
for (int i = 0; i < block_length(sha_type) / 4; i++) {
|
|
reg_addr_buf[i] = __bswap_32(data_words[i]);
|
|
}
|
|
asm volatile ("memw");
|
|
|
|
if(is_first_block) {
|
|
DPORT_REG_WRITE(SHA_START_REG(sha_type), 1);
|
|
} else {
|
|
DPORT_REG_WRITE(SHA_CONTINUE_REG(sha_type), 1);
|
|
}
|
|
|
|
esp_sha_unlock_memory_block();
|
|
|
|
/* Note: deliberately not waiting for this operation to complete,
|
|
as a performance tweak - delay waiting until the next time we need the SHA
|
|
unit, instead.
|
|
*/
|
|
}
|
|
|
|
void esp_sha(esp_sha_type sha_type, const unsigned char *input, size_t ilen, unsigned char *output)
|
|
{
|
|
size_t block_len = block_length(sha_type);
|
|
|
|
esp_sha_lock_engine(sha_type);
|
|
|
|
SHA_CTX ctx;
|
|
ets_sha_init(&ctx);
|
|
while(ilen > 0) {
|
|
size_t chunk_len = (ilen > block_len) ? block_len : ilen;
|
|
esp_sha_lock_memory_block();
|
|
esp_sha_wait_idle();
|
|
DPORT_STALL_OTHER_CPU_START();
|
|
{
|
|
// This SHA ROM function reads DPORT regs
|
|
ets_sha_update(&ctx, sha_type, input, chunk_len * 8);
|
|
}
|
|
DPORT_STALL_OTHER_CPU_END();
|
|
esp_sha_unlock_memory_block();
|
|
input += chunk_len;
|
|
ilen -= chunk_len;
|
|
}
|
|
esp_sha_lock_memory_block();
|
|
esp_sha_wait_idle();
|
|
DPORT_STALL_OTHER_CPU_START();
|
|
{
|
|
ets_sha_finish(&ctx, sha_type, output);
|
|
}
|
|
DPORT_STALL_OTHER_CPU_END();
|
|
esp_sha_unlock_memory_block();
|
|
|
|
esp_sha_unlock_engine(sha_type);
|
|
}
|