399 lines
16 KiB
C
399 lines
16 KiB
C
// Copyright 2010-2019 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "esp_err.h"
|
|
#include "esp32/rom/lldesc.h"
|
|
#include "soc/spi_periph.h"
|
|
#include "hal/spi_types.h"
|
|
#include "sdkconfig.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
|
|
//Maximum amount of bytes that can be put in one DMA descriptor
|
|
#define SPI_MAX_DMA_LEN (4096-4)
|
|
|
|
/**
|
|
* Transform unsigned integer of length <= 32 bits to the format which can be
|
|
* sent by the SPI driver directly.
|
|
*
|
|
* E.g. to send 9 bits of data, you can:
|
|
*
|
|
* uint16_t data = SPI_SWAP_DATA_TX(0x145, 9);
|
|
*
|
|
* Then points tx_buffer to ``&data``.
|
|
*
|
|
* @param DATA Data to be sent, can be uint8_t, uint16_t or uint32_t.
|
|
* @param LEN Length of data to be sent, since the SPI peripheral sends from
|
|
* the MSB, this helps to shift the data to the MSB.
|
|
*/
|
|
#define SPI_SWAP_DATA_TX(DATA, LEN) __builtin_bswap32((uint32_t)(DATA)<<(32-(LEN)))
|
|
|
|
/**
|
|
* Transform received data of length <= 32 bits to the format of an unsigned integer.
|
|
*
|
|
* E.g. to transform the data of 15 bits placed in a 4-byte array to integer:
|
|
*
|
|
* uint16_t data = SPI_SWAP_DATA_RX(*(uint32_t*)t->rx_data, 15);
|
|
*
|
|
* @param DATA Data to be rearranged, can be uint8_t, uint16_t or uint32_t.
|
|
* @param LEN Length of data received, since the SPI peripheral writes from
|
|
* the MSB, this helps to shift the data to the LSB.
|
|
*/
|
|
#define SPI_SWAP_DATA_RX(DATA, LEN) (__builtin_bswap32(DATA)>>(32-(LEN)))
|
|
|
|
/**
|
|
* @brief This is a configuration structure for a SPI bus.
|
|
*
|
|
* You can use this structure to specify the GPIO pins of the bus. Normally, the driver will use the
|
|
* GPIO matrix to route the signals. An exception is made when all signals either can be routed through
|
|
* the IO_MUX or are -1. In that case, the IO_MUX is used, allowing for >40MHz speeds.
|
|
*
|
|
* @note Be advised that the slave driver does not use the quadwp/quadhd lines and fields in spi_bus_config_t refering to these lines will be ignored and can thus safely be left uninitialized.
|
|
*/
|
|
typedef struct {
|
|
int mosi_io_num; ///< GPIO pin for Master Out Slave In (=spi_d) signal, or -1 if not used.
|
|
int miso_io_num; ///< GPIO pin for Master In Slave Out (=spi_q) signal, or -1 if not used.
|
|
int sclk_io_num; ///< GPIO pin for Spi CLocK signal, or -1 if not used.
|
|
int quadwp_io_num; ///< GPIO pin for WP (Write Protect) signal which is used as D2 in 4-bit communication modes, or -1 if not used.
|
|
int quadhd_io_num; ///< GPIO pin for HD (HolD) signal which is used as D3 in 4-bit communication modes, or -1 if not used.
|
|
int max_transfer_sz; ///< Maximum transfer size, in bytes. Defaults to 4094 if 0.
|
|
uint32_t flags; ///< Abilities of bus to be checked by the driver. Or-ed value of ``SPICOMMON_BUSFLAG_*`` flags.
|
|
int intr_flags; /**< Interrupt flag for the bus to set the priority, and IRAM attribute, see
|
|
* ``esp_intr_alloc.h``. Note that the EDGE, INTRDISABLED attribute are ignored
|
|
* by the driver. Note that if ESP_INTR_FLAG_IRAM is set, ALL the callbacks of
|
|
* the driver, and their callee functions, should be put in the IRAM.
|
|
*/
|
|
} spi_bus_config_t;
|
|
|
|
|
|
/**
|
|
* @brief Initialize a SPI bus
|
|
*
|
|
* @warning For now, only supports HSPI and VSPI.
|
|
*
|
|
* @param host SPI peripheral that controls this bus
|
|
* @param bus_config Pointer to a spi_bus_config_t struct specifying how the host should be initialized
|
|
* @param dma_chan Either channel 1 or 2, or 0 in the case when no DMA is required. Selecting a DMA channel
|
|
* for a SPI bus allows transfers on the bus to have sizes only limited by the amount of
|
|
* internal memory. Selecting no DMA channel (by passing the value 0) limits the amount of
|
|
* bytes transfered to a maximum of 64. Set to 0 if only the SPI flash uses
|
|
* this bus.
|
|
*
|
|
* @warning If a DMA channel is selected, any transmit and receive buffer used should be allocated in
|
|
* DMA-capable memory.
|
|
*
|
|
* @warning The ISR of SPI is always executed on the core which calls this
|
|
* function. Never starve the ISR on this core or the SPI transactions will not
|
|
* be handled.
|
|
*
|
|
* @return
|
|
* - ESP_ERR_INVALID_ARG if configuration is invalid
|
|
* - ESP_ERR_INVALID_STATE if host already is in use
|
|
* - ESP_ERR_NO_MEM if out of memory
|
|
* - ESP_OK on success
|
|
*/
|
|
esp_err_t spi_bus_initialize(spi_host_device_t host, const spi_bus_config_t *bus_config, int dma_chan);
|
|
|
|
/**
|
|
* @brief Free a SPI bus
|
|
*
|
|
* @warning In order for this to succeed, all devices have to be removed first.
|
|
*
|
|
* @param host SPI peripheral to free
|
|
* @return
|
|
* - ESP_ERR_INVALID_ARG if parameter is invalid
|
|
* - ESP_ERR_INVALID_STATE if not all devices on the bus are freed
|
|
* - ESP_OK on success
|
|
*/
|
|
esp_err_t spi_bus_free(spi_host_device_t host);
|
|
|
|
|
|
/** @cond */ //Doxygen command to hide deprecated function (or non-public) from API Reference
|
|
|
|
/**
|
|
* @brief Try to claim a SPI peripheral
|
|
*
|
|
* Call this if your driver wants to manage a SPI peripheral.
|
|
*
|
|
* @param host Peripheral to claim
|
|
* @param source The caller indentification string.
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return True if peripheral is claimed successfully; false if peripheral already is claimed.
|
|
*/
|
|
bool spicommon_periph_claim(spi_host_device_t host, const char* source);
|
|
|
|
/**
|
|
* @brief Check whether the spi periph is in use.
|
|
*
|
|
* @param host Peripheral to check.
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return True if in use, otherwise false.
|
|
*/
|
|
bool spicommon_periph_in_use(spi_host_device_t host);
|
|
|
|
/**
|
|
* @brief Return the SPI peripheral so another driver can claim it.
|
|
*
|
|
* @param host Peripheral to return
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return True if peripheral is returned successfully; false if peripheral was free to claim already.
|
|
*/
|
|
bool spicommon_periph_free(spi_host_device_t host);
|
|
|
|
/**
|
|
* @brief Try to claim a SPI DMA channel
|
|
*
|
|
* Call this if your driver wants to use SPI with a DMA channnel.
|
|
*
|
|
* @param dma_chan channel to claim
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return True if success; false otherwise.
|
|
*/
|
|
bool spicommon_dma_chan_claim(int dma_chan);
|
|
|
|
/**
|
|
* @brief Check whether the spi DMA channel is in use.
|
|
*
|
|
* @param dma_chan DMA channel to check.
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return True if in use, otherwise false.
|
|
*/
|
|
bool spicommon_dma_chan_in_use(int dma_chan);
|
|
|
|
/**
|
|
* @brief Return the SPI DMA channel so other driver can claim it, or just to power down DMA.
|
|
*
|
|
* @param dma_chan channel to return
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return True if success; false otherwise.
|
|
*/
|
|
bool spicommon_dma_chan_free(int dma_chan);
|
|
|
|
/// @note macros deprecated from public API
|
|
#define SPICOMMON_BUSFLAG_SLAVE 0 ///< Initialize I/O in slave mode
|
|
#define SPICOMMON_BUSFLAG_MASTER (1<<0) ///< Initialize I/O in master mode
|
|
#define SPICOMMON_BUSFLAG_IOMUX_PINS (1<<1) ///< Check using iomux pins. Or indicates the pins are configured through the IO mux rather than GPIO matrix.
|
|
#define SPICOMMON_BUSFLAG_SCLK (1<<2) ///< Check existing of SCLK pin. Or indicates CLK line initialized.
|
|
#define SPICOMMON_BUSFLAG_MISO (1<<3) ///< Check existing of MISO pin. Or indicates MISO line initialized.
|
|
#define SPICOMMON_BUSFLAG_MOSI (1<<4) ///< Check existing of MOSI pin. Or indicates CLK line initialized.
|
|
#define SPICOMMON_BUSFLAG_DUAL (1<<5) ///< Check MOSI and MISO pins can output. Or indicates bus able to work under DIO mode.
|
|
#define SPICOMMON_BUSFLAG_WPHD (1<<6) ///< Check existing of WP and HD pins. Or indicates WP & HD pins initialized.
|
|
#define SPICOMMON_BUSFLAG_QUAD (SPICOMMON_BUSFLAG_DUAL|SPICOMMON_BUSFLAG_WPHD) ///< Check existing of MOSI/MISO/WP/HD pins as output. Or indicates bus able to work under QIO mode.
|
|
|
|
#define SPICOMMON_BUSFLAG_NATIVE_PINS SPICOMMON_BUSFLAG_IOMUX_PINS
|
|
|
|
|
|
/**
|
|
* @brief Connect a SPI peripheral to GPIO pins
|
|
*
|
|
* This routine is used to connect a SPI peripheral to the IO-pads and DMA channel given in
|
|
* the arguments. Depending on the IO-pads requested, the routing is done either using the
|
|
* IO_mux or using the GPIO matrix.
|
|
*
|
|
* @note This public API is deprecated. Please call ``spi_bus_initialize`` for master
|
|
* bus initialization and ``spi_slave_initialize`` for slave initialization.
|
|
*
|
|
* @param host SPI peripheral to be routed
|
|
* @param bus_config Pointer to a spi_bus_config struct detailing the GPIO pins
|
|
* @param dma_chan DMA-channel (1 or 2) to use, or 0 for no DMA.
|
|
* @param flags Combination of SPICOMMON_BUSFLAG_* flags, set to ensure the pins set are capable with some functions:
|
|
* - ``SPICOMMON_BUSFLAG_MASTER``: Initialize I/O in master mode
|
|
* - ``SPICOMMON_BUSFLAG_SLAVE``: Initialize I/O in slave mode
|
|
* - ``SPICOMMON_BUSFLAG_IOMUX_PINS``: Pins set should match the iomux pins of the controller.
|
|
* - ``SPICOMMON_BUSFLAG_SCLK``, ``SPICOMMON_BUSFLAG_MISO``, ``SPICOMMON_BUSFLAG_MOSI``:
|
|
* Make sure SCLK/MISO/MOSI is/are set to a valid GPIO. Also check output capability according to the mode.
|
|
* - ``SPICOMMON_BUSFLAG_DUAL``: Make sure both MISO and MOSI are output capable so that DIO mode is capable.
|
|
* - ``SPICOMMON_BUSFLAG_WPHD`` Make sure WP and HD are set to valid output GPIOs.
|
|
* - ``SPICOMMON_BUSFLAG_QUAD``: Combination of ``SPICOMMON_BUSFLAG_DUAL`` and ``SPICOMMON_BUSFLAG_WPHD``.
|
|
* @param[out] flags_o A SPICOMMON_BUSFLAG_* flag combination of bus abilities will be written to this address.
|
|
* Leave to NULL if not needed.
|
|
* - ``SPICOMMON_BUSFLAG_IOMUX_PINS``: The bus is connected to iomux pins.
|
|
* - ``SPICOMMON_BUSFLAG_SCLK``, ``SPICOMMON_BUSFLAG_MISO``, ``SPICOMMON_BUSFLAG_MOSI``: The bus has
|
|
* CLK/MISO/MOSI connected.
|
|
* - ``SPICOMMON_BUSFLAG_DUAL``: The bus is capable with DIO mode.
|
|
* - ``SPICOMMON_BUSFLAG_WPHD`` The bus has WP and HD connected.
|
|
* - ``SPICOMMON_BUSFLAG_QUAD``: Combination of ``SPICOMMON_BUSFLAG_DUAL`` and ``SPICOMMON_BUSFLAG_WPHD``.
|
|
* @return
|
|
* - ESP_ERR_INVALID_ARG if parameter is invalid
|
|
* - ESP_OK on success
|
|
*/
|
|
esp_err_t spicommon_bus_initialize_io(spi_host_device_t host, const spi_bus_config_t *bus_config, int dma_chan, uint32_t flags, uint32_t *flags_o);
|
|
|
|
/**
|
|
* @brief Free the IO used by a SPI peripheral
|
|
*
|
|
* @note This public API is deprecated. Please call ``spi_bus_free`` for master
|
|
* bus deinitialization and ``spi_slave_free`` for slave deinitialization.
|
|
*
|
|
* @param bus_cfg Bus config struct which defines which pins to be used.
|
|
*
|
|
* @return
|
|
* - ESP_ERR_INVALID_ARG if parameter is invalid
|
|
* - ESP_OK on success
|
|
*/
|
|
esp_err_t spicommon_bus_free_io_cfg(const spi_bus_config_t *bus_cfg);
|
|
|
|
/**
|
|
* @brief Initialize a Chip Select pin for a specific SPI peripheral
|
|
*
|
|
* @note This public API is deprecated. Please call corresponding device initialization
|
|
* functions.
|
|
*
|
|
* @param host SPI peripheral
|
|
* @param cs_io_num GPIO pin to route
|
|
* @param cs_num CS id to route
|
|
* @param force_gpio_matrix If true, CS will always be routed through the GPIO matrix. If false,
|
|
* if the GPIO number allows it, the routing will happen through the IO_mux.
|
|
*/
|
|
void spicommon_cs_initialize(spi_host_device_t host, int cs_io_num, int cs_num, int force_gpio_matrix);
|
|
|
|
/**
|
|
* @brief Free a chip select line
|
|
*
|
|
* @param cs_gpio_num CS gpio num to free
|
|
*
|
|
* @note This public API is deprecated.
|
|
*/
|
|
void spicommon_cs_free_io(int cs_gpio_num);
|
|
|
|
/**
|
|
* @brief Check whether all pins used by a host are through IOMUX.
|
|
*
|
|
* @param host SPI peripheral
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return false if any pins are through the GPIO matrix, otherwise true.
|
|
*/
|
|
bool spicommon_bus_using_iomux(spi_host_device_t host);
|
|
|
|
/**
|
|
* @brief Check whether all pins used by a host are through IOMUX.
|
|
*
|
|
* @param host SPI peripheral
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return false if any pins are through the GPIO matrix, otherwise true.
|
|
*/
|
|
bool spicommon_bus_using_iomux(spi_host_device_t host);
|
|
|
|
/**
|
|
* @brief Get the IRQ source for a specific SPI host
|
|
*
|
|
* @param host The SPI host
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return The hosts IRQ source
|
|
*/
|
|
int spicommon_irqsource_for_host(spi_host_device_t host);
|
|
|
|
/**
|
|
* @brief Get the IRQ source for a specific SPI DMA
|
|
*
|
|
* @param host The SPI host
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return The hosts IRQ source
|
|
*/
|
|
int spicommon_irqdma_source_for_host(spi_host_device_t host);
|
|
|
|
/**
|
|
* Callback, to be called when a DMA engine reset is completed
|
|
*/
|
|
typedef void(*dmaworkaround_cb_t)(void *arg);
|
|
|
|
|
|
/**
|
|
* @brief Request a reset for a certain DMA channel
|
|
*
|
|
* @note In some (well-defined) cases in the ESP32 (at least rev v.0 and v.1), a SPI DMA channel will get confused. This can be remedied
|
|
* by resetting the SPI DMA hardware in case this happens. Unfortunately, the reset knob used for thsi will reset _both_ DMA channels, and
|
|
* as such can only done safely when both DMA channels are idle. These functions coordinate this.
|
|
*
|
|
* Essentially, when a reset is needed, a driver can request this using spicommon_dmaworkaround_req_reset. This is supposed to be called
|
|
* with an user-supplied function as an argument. If both DMA channels are idle, this call will reset the DMA subsystem and return true.
|
|
* If the other DMA channel is still busy, it will return false; as soon as the other DMA channel is done, however, it will reset the
|
|
* DMA subsystem and call the callback. The callback is then supposed to be used to continue the SPI drivers activity.
|
|
*
|
|
* @param dmachan DMA channel associated with the SPI host that needs a reset
|
|
* @param cb Callback to call in case DMA channel cannot be reset immediately
|
|
* @param arg Argument to the callback
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return True when a DMA reset could be executed immediately. False when it could not; in this
|
|
* case the callback will be called with the specified argument when the logic can execute
|
|
* a reset, after that reset.
|
|
*/
|
|
bool spicommon_dmaworkaround_req_reset(int dmachan, dmaworkaround_cb_t cb, void *arg);
|
|
|
|
|
|
/**
|
|
* @brief Check if a DMA reset is requested but has not completed yet
|
|
*
|
|
* @note This public API is deprecated.
|
|
*
|
|
* @return True when a DMA reset is requested but hasn't completed yet. False otherwise.
|
|
*/
|
|
bool spicommon_dmaworkaround_reset_in_progress();
|
|
|
|
|
|
/**
|
|
* @brief Mark a DMA channel as idle.
|
|
*
|
|
* A call to this function tells the workaround logic that this channel will
|
|
* not be affected by a global SPI DMA reset.
|
|
*
|
|
* @note This public API is deprecated.
|
|
*/
|
|
void spicommon_dmaworkaround_idle(int dmachan);
|
|
|
|
/**
|
|
* @brief Mark a DMA channel as active.
|
|
*
|
|
* A call to this function tells the workaround logic that this channel will
|
|
* be affected by a global SPI DMA reset, and a reset like that should not be attempted.
|
|
*
|
|
* @note This public API is deprecated.
|
|
*/
|
|
void spicommon_dmaworkaround_transfer_active(int dmachan);
|
|
|
|
/** @endcond */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|