Using xxx_periph.h in whole IDF instead of xxx_reg.h, xxx_struct.h, xxx_channel.h ... . Cleaned up header files from unnecessary headers (releated to soc/... headers).
433 lines
14 KiB
C
433 lines
14 KiB
C
#ifndef __PCNT_H__
|
|
#define __PCNT_H__
|
|
|
|
#include <esp_types.h>
|
|
#include "esp_intr_alloc.h"
|
|
#include "esp_err.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/semphr.h"
|
|
#include "freertos/xtensa_api.h"
|
|
#include "soc/soc.h"
|
|
#include "soc/pcnt_periph.h"
|
|
#include "driver/gpio.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#define PCNT_PIN_NOT_USED (-1) /*!< When selected for a pin, this pin will not be used */
|
|
|
|
/**
|
|
* @brief Selection of available modes that determine the counter's action depending on the state of the control signal's input GPIO
|
|
* @note Configuration covers two actions, one for high, and one for low level on the control input
|
|
*/
|
|
typedef enum {
|
|
PCNT_MODE_KEEP = 0, /*!< Control mode: won't change counter mode*/
|
|
PCNT_MODE_REVERSE = 1, /*!< Control mode: invert counter mode(increase -> decrease, decrease -> increase) */
|
|
PCNT_MODE_DISABLE = 2, /*!< Control mode: Inhibit counter(counter value will not change in this condition) */
|
|
PCNT_MODE_MAX
|
|
} pcnt_ctrl_mode_t;
|
|
|
|
/**
|
|
* @brief Selection of available modes that determine the counter's action on the edge of the pulse signal's input GPIO
|
|
* @note Configuration covers two actions, one for positive, and one for negative edge on the pulse input
|
|
*/
|
|
typedef enum {
|
|
PCNT_COUNT_DIS = 0, /*!< Counter mode: Inhibit counter(counter value will not change in this condition) */
|
|
PCNT_COUNT_INC = 1, /*!< Counter mode: Increase counter value */
|
|
PCNT_COUNT_DEC = 2, /*!< Counter mode: Decrease counter value */
|
|
PCNT_COUNT_MAX
|
|
} pcnt_count_mode_t;
|
|
|
|
/**
|
|
* @brief Selection of all available PCNT units
|
|
*/
|
|
typedef enum {
|
|
PCNT_UNIT_0 = 0, /*!< PCNT unit 0 */
|
|
PCNT_UNIT_1 = 1, /*!< PCNT unit 1 */
|
|
PCNT_UNIT_2 = 2, /*!< PCNT unit 2 */
|
|
PCNT_UNIT_3 = 3, /*!< PCNT unit 3 */
|
|
PCNT_UNIT_4 = 4, /*!< PCNT unit 4 */
|
|
PCNT_UNIT_5 = 5, /*!< PCNT unit 5 */
|
|
PCNT_UNIT_6 = 6, /*!< PCNT unit 6 */
|
|
PCNT_UNIT_7 = 7, /*!< PCNT unit 7 */
|
|
PCNT_UNIT_MAX,
|
|
} pcnt_unit_t;
|
|
|
|
/**
|
|
* @brief Selection of channels available for a single PCNT unit
|
|
*/
|
|
typedef enum {
|
|
PCNT_CHANNEL_0 = 0x00, /*!< PCNT channel 0 */
|
|
PCNT_CHANNEL_1 = 0x01, /*!< PCNT channel 1 */
|
|
PCNT_CHANNEL_MAX,
|
|
} pcnt_channel_t;
|
|
|
|
/**
|
|
* @brief Selection of counter's events the may trigger an interrupt
|
|
*/
|
|
typedef enum {
|
|
PCNT_EVT_L_LIM = 0, /*!< PCNT watch point event: Minimum counter value */
|
|
PCNT_EVT_H_LIM = 1, /*!< PCNT watch point event: Maximum counter value */
|
|
PCNT_EVT_THRES_0 = 2, /*!< PCNT watch point event: threshold0 value event */
|
|
PCNT_EVT_THRES_1 = 3, /*!< PCNT watch point event: threshold1 value event */
|
|
PCNT_EVT_ZERO = 4, /*!< PCNT watch point event: counter value zero event */
|
|
PCNT_EVT_MAX
|
|
} pcnt_evt_type_t;
|
|
|
|
/**
|
|
* @brief Pulse Counter configuration for a single channel
|
|
*/
|
|
typedef struct {
|
|
int pulse_gpio_num; /*!< Pulse input GPIO number, if you want to use GPIO16, enter pulse_gpio_num = 16, a negative value will be ignored */
|
|
int ctrl_gpio_num; /*!< Control signal input GPIO number, a negative value will be ignored */
|
|
pcnt_ctrl_mode_t lctrl_mode; /*!< PCNT low control mode */
|
|
pcnt_ctrl_mode_t hctrl_mode; /*!< PCNT high control mode */
|
|
pcnt_count_mode_t pos_mode; /*!< PCNT positive edge count mode */
|
|
pcnt_count_mode_t neg_mode; /*!< PCNT negative edge count mode */
|
|
int16_t counter_h_lim; /*!< Maximum counter value */
|
|
int16_t counter_l_lim; /*!< Minimum counter value */
|
|
pcnt_unit_t unit; /*!< PCNT unit number */
|
|
pcnt_channel_t channel; /*!< the PCNT channel */
|
|
} pcnt_config_t;
|
|
|
|
typedef intr_handle_t pcnt_isr_handle_t;
|
|
|
|
/**
|
|
* @brief Configure Pulse Counter unit
|
|
* @note
|
|
* This function will disable three events: PCNT_EVT_L_LIM, PCNT_EVT_H_LIM, PCNT_EVT_ZERO.
|
|
*
|
|
* @param pcnt_config Pointer of Pulse Counter unit configure parameter
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_unit_config(const pcnt_config_t *pcnt_config);
|
|
|
|
/**
|
|
* @brief Get pulse counter value
|
|
*
|
|
* @param pcnt_unit Pulse Counter unit number
|
|
* @param count Pointer to accept counter value
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_get_counter_value(pcnt_unit_t pcnt_unit, int16_t* count);
|
|
|
|
/**
|
|
* @brief Pause PCNT counter of PCNT unit
|
|
*
|
|
* @param pcnt_unit PCNT unit number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_counter_pause(pcnt_unit_t pcnt_unit);
|
|
|
|
/**
|
|
* @brief Resume counting for PCNT counter
|
|
*
|
|
* @param pcnt_unit PCNT unit number, select from pcnt_unit_t
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_counter_resume(pcnt_unit_t pcnt_unit);
|
|
|
|
/**
|
|
* @brief Clear and reset PCNT counter value to zero
|
|
*
|
|
* @param pcnt_unit PCNT unit number, select from pcnt_unit_t
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_counter_clear(pcnt_unit_t pcnt_unit);
|
|
|
|
/**
|
|
* @brief Enable PCNT interrupt for PCNT unit
|
|
* @note
|
|
* Each Pulse counter unit has five watch point events that share the same interrupt.
|
|
* Configure events with pcnt_event_enable() and pcnt_event_disable()
|
|
*
|
|
* @param pcnt_unit PCNT unit number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_intr_enable(pcnt_unit_t pcnt_unit);
|
|
|
|
/**
|
|
* @brief Disable PCNT interrupt for PCNT unit
|
|
*
|
|
* @param pcnt_unit PCNT unit number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_intr_disable(pcnt_unit_t pcnt_unit);
|
|
|
|
/**
|
|
* @brief Enable PCNT event of PCNT unit
|
|
*
|
|
* @param unit PCNT unit number
|
|
* @param evt_type Watch point event type.
|
|
* All enabled events share the same interrupt (one interrupt per pulse counter unit).
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_event_enable(pcnt_unit_t unit, pcnt_evt_type_t evt_type);
|
|
|
|
/**
|
|
* @brief Disable PCNT event of PCNT unit
|
|
*
|
|
* @param unit PCNT unit number
|
|
* @param evt_type Watch point event type.
|
|
* All enabled events share the same interrupt (one interrupt per pulse counter unit).
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_event_disable(pcnt_unit_t unit, pcnt_evt_type_t evt_type);
|
|
|
|
/**
|
|
* @brief Set PCNT event value of PCNT unit
|
|
*
|
|
* @param unit PCNT unit number
|
|
* @param evt_type Watch point event type.
|
|
* All enabled events share the same interrupt (one interrupt per pulse counter unit).
|
|
*
|
|
* @param value Counter value for PCNT event
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_set_event_value(pcnt_unit_t unit, pcnt_evt_type_t evt_type, int16_t value);
|
|
|
|
/**
|
|
* @brief Get PCNT event value of PCNT unit
|
|
*
|
|
* @param unit PCNT unit number
|
|
* @param evt_type Watch point event type.
|
|
* All enabled events share the same interrupt (one interrupt per pulse counter unit).
|
|
* @param value Pointer to accept counter value for PCNT event
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_get_event_value(pcnt_unit_t unit, pcnt_evt_type_t evt_type, int16_t *value);
|
|
|
|
/**
|
|
* @brief Register PCNT interrupt handler, the handler is an ISR.
|
|
* The handler will be attached to the same CPU core that this function is running on.
|
|
* Please do not use pcnt_isr_service_install if this function was called.
|
|
*
|
|
* @param fn Interrupt handler function.
|
|
* @param arg Parameter for handler function
|
|
* @param intr_alloc_flags Flags used to allocate the interrupt. One or multiple (ORred)
|
|
* ESP_INTR_FLAG_* values. See esp_intr_alloc.h for more info.
|
|
* @param handle Pointer to return handle. If non-NULL, a handle for the interrupt will
|
|
* be returned here. Calling esp_intr_free to unregister this ISR service if needed,
|
|
* but only if the handle is not NULL.
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_NOT_FOUND Can not find the interrupt that matches the flags.
|
|
* - ESP_ERR_INVALID_ARG Function pointer error.
|
|
*/
|
|
esp_err_t pcnt_isr_register(void (*fn)(void*), void * arg, int intr_alloc_flags, pcnt_isr_handle_t *handle);
|
|
|
|
/**
|
|
* @brief Configure PCNT pulse signal input pin and control input pin
|
|
*
|
|
* @param unit PCNT unit number
|
|
* @param channel PCNT channel number
|
|
* @param pulse_io Pulse signal input GPIO
|
|
* @param ctrl_io Control signal input GPIO
|
|
*
|
|
* @note Set the signal input to PCNT_PIN_NOT_USED if unused.
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_set_pin(pcnt_unit_t unit, pcnt_channel_t channel, int pulse_io, int ctrl_io);
|
|
|
|
/**
|
|
* @brief Enable PCNT input filter
|
|
*
|
|
* @param unit PCNT unit number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_filter_enable(pcnt_unit_t unit);
|
|
|
|
/**
|
|
* @brief Disable PCNT input filter
|
|
*
|
|
* @param unit PCNT unit number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_filter_disable(pcnt_unit_t unit);
|
|
|
|
/**
|
|
* @brief Set PCNT filter value
|
|
*
|
|
* @param unit PCNT unit number
|
|
* @param filter_val PCNT signal filter value, counter in APB_CLK cycles.
|
|
* Any pulses lasting shorter than this will be ignored when the filter is enabled.
|
|
* @note
|
|
* filter_val is a 10-bit value, so the maximum filter_val should be limited to 1023.
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_set_filter_value(pcnt_unit_t unit, uint16_t filter_val);
|
|
|
|
/**
|
|
* @brief Get PCNT filter value
|
|
*
|
|
* @param unit PCNT unit number
|
|
* @param filter_val Pointer to accept PCNT filter value.
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_get_filter_value(pcnt_unit_t unit, uint16_t *filter_val);
|
|
|
|
/**
|
|
* @brief Set PCNT counter mode
|
|
*
|
|
* @param unit PCNT unit number
|
|
* @param channel PCNT channel number
|
|
* @param pos_mode Counter mode when detecting positive edge
|
|
* @param neg_mode Counter mode when detecting negative edge
|
|
* @param hctrl_mode Counter mode when control signal is high level
|
|
* @param lctrl_mode Counter mode when control signal is low level
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_set_mode(pcnt_unit_t unit, pcnt_channel_t channel,
|
|
pcnt_count_mode_t pos_mode, pcnt_count_mode_t neg_mode,
|
|
pcnt_ctrl_mode_t hctrl_mode, pcnt_ctrl_mode_t lctrl_mode);
|
|
|
|
/**
|
|
* @brief Add ISR handler for specified unit.
|
|
*
|
|
* Call this function after using pcnt_isr_service_install() to
|
|
* install the PCNT driver's ISR handler service.
|
|
*
|
|
* The ISR handlers do not need to be declared with IRAM_ATTR,
|
|
* unless you pass the ESP_INTR_FLAG_IRAM flag when allocating the
|
|
* ISR in pcnt_isr_service_install().
|
|
*
|
|
* This ISR handler will be called from an ISR. So there is a stack
|
|
* size limit (configurable as "ISR stack size" in menuconfig). This
|
|
* limit is smaller compared to a global PCNT interrupt handler due
|
|
* to the additional level of indirection.
|
|
*
|
|
* @param unit PCNT unit number
|
|
* @param isr_handler Interrupt handler function.
|
|
* @param args Parameter for handler function
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_isr_handler_add(pcnt_unit_t unit, void(*isr_handler)(void *), void *args);
|
|
|
|
/**
|
|
* @brief Install PCNT ISR service.
|
|
* @note We can manage different interrupt service for each unit.
|
|
* This function will use the default ISR handle service, Calling pcnt_isr_service_uninstall to
|
|
* uninstall the default service if needed. Please do not use pcnt_isr_register if this function was called.
|
|
*
|
|
* @param intr_alloc_flags Flags used to allocate the interrupt. One or multiple (ORred)
|
|
* ESP_INTR_FLAG_* values. See esp_intr_alloc.h for more info.
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_NO_MEM No memory to install this service
|
|
* - ESP_ERR_INVALID_STATE ISR service already installed
|
|
*/
|
|
esp_err_t pcnt_isr_service_install(int intr_alloc_flags);
|
|
|
|
/**
|
|
* @brief Uninstall PCNT ISR service, freeing related resources.
|
|
*/
|
|
void pcnt_isr_service_uninstall(void);
|
|
|
|
/**
|
|
* @brief Delete ISR handler for specified unit.
|
|
*
|
|
* @param unit PCNT unit number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t pcnt_isr_handler_remove(pcnt_unit_t unit);
|
|
|
|
/**
|
|
* @addtogroup pcnt-examples
|
|
*
|
|
* @{
|
|
*
|
|
* EXAMPLE OF PCNT CONFIGURATION
|
|
* ==============================
|
|
* @code{c}
|
|
* //1. Config PCNT unit
|
|
* pcnt_config_t pcnt_config = {
|
|
* .pulse_gpio_num = 4, //set gpio4 as pulse input gpio
|
|
* .ctrl_gpio_num = 5, //set gpio5 as control gpio
|
|
* .channel = PCNT_CHANNEL_0, //use unit 0 channel 0
|
|
* .lctrl_mode = PCNT_MODE_REVERSE, //when control signal is low, reverse the primary counter mode(inc->dec/dec->inc)
|
|
* .hctrl_mode = PCNT_MODE_KEEP, //when control signal is high, keep the primary counter mode
|
|
* .pos_mode = PCNT_COUNT_INC, //increment the counter
|
|
* .neg_mode = PCNT_COUNT_DIS, //keep the counter value
|
|
* .counter_h_lim = 10,
|
|
* .counter_l_lim = -10,
|
|
* };
|
|
* pcnt_unit_config(&pcnt_config); //init unit
|
|
* @endcode
|
|
*
|
|
* EXAMPLE OF PCNT EVENT SETTING
|
|
* ==============================
|
|
* @code{c}
|
|
* //2. Configure PCNT watchpoint event.
|
|
* pcnt_set_event_value(PCNT_UNIT_0, PCNT_EVT_THRES_1, 5); //set thres1 value
|
|
* pcnt_event_enable(PCNT_UNIT_0, PCNT_EVT_THRES_1); //enable thres1 event
|
|
* @endcode
|
|
*
|
|
* For more examples please refer to PCNT example code in IDF_PATH/examples
|
|
*
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif
|