69 lines
2.5 KiB
C
Executable file
69 lines
2.5 KiB
C
Executable file
/*******************************************************************************
|
|
Copyright (c) 2006-2013 by Tensilica Inc. ALL RIGHTS RESERVED.
|
|
These coded instructions, statements, and computer programs are the
|
|
copyrighted works and confidential proprietary information of Tensilica Inc.
|
|
They may not be modified, copied, reproduced, distributed, or disclosed to
|
|
third parties in any manner, medium, or form, in whole or in part, without
|
|
the prior written consent of Tensilica Inc.
|
|
--------------------------------------------------------------------------------
|
|
|
|
uart-16550-board.h Board-specific UART info on these boards:
|
|
Avnet AV60 (XT-AV60)
|
|
Avnet AV110 (XT-AV110)
|
|
Avnet AV200 (XT-AV200)
|
|
Xilinx ML605 (XT-ML605)
|
|
Xilinx KC705 (XT-KC705)
|
|
|
|
Interface between board-independent driver and board-specific header.
|
|
|
|
This is used by a board-independent 16550 UART driver to obtain board-specific
|
|
information about 1 instance of the 16550 UART on the board, such as the device
|
|
register base address and spacing (a function of how the address lines are
|
|
connected on the board) and the frequency of the UART clock. The driver does
|
|
not refer directly to the board-specific header, which therefore is not
|
|
constrained to use macro names consistent with other boards.
|
|
|
|
!! Must not contain any board-specific macro names (only UART specific). !!
|
|
|
|
Included at compile-time via an include path specific to the board.
|
|
|
|
These boards contain a single 16550 UART implemented on the FPGA.
|
|
Their clock frequency comes from the board's core clock (not its own crystal)
|
|
which depends on the core config so is not a constant. Obtained via the BSP.
|
|
|
|
*******************************************************************************/
|
|
|
|
#ifndef _UART_16550_BOARD_H
|
|
#define _UART_16550_BOARD_H
|
|
|
|
#include <xtensa/xtbsp.h> /* BSP API */
|
|
#include <xtensa/board.h> /* Board info */
|
|
|
|
|
|
/* Base address of UART's registers. */
|
|
#ifdef UART16550_VADDR
|
|
#define UART_16550_REGBASE UART16550_VADDR
|
|
#endif
|
|
|
|
/*
|
|
The UART's registers are connected at word addresses on these boards.
|
|
Each byte-wide register appears as the least-significant-byte (LSB) of the
|
|
word regardless of the endianness of the processor.
|
|
*/
|
|
#define UART_16550_REGSPACING 4
|
|
typedef unsigned uart16550_reg_t;
|
|
|
|
/* UART Clock Frequency in Hz */
|
|
#define UART_16550_XTAL_FREQ xtbsp_clock_freq_hz()
|
|
|
|
/* UART Interrupt Number */
|
|
#ifdef UART16550_INTNUM
|
|
#define UART_16550_INTNUM UART16550_INTNUM
|
|
#endif
|
|
|
|
|
|
/* Include generic information shared by all boards that use this device. */
|
|
#include <xtensa/uart-16550.h>
|
|
|
|
#endif /* _UART_16550_BOARD_H */
|
|
|