3c3e375d8d
1. fix failture of mesh stop caused by block-sending. 2. fix when FIXED_ROOT is set, 2nd layer devices can not receive mesh event ESP_ERR_MESH_NO_PARENT_FOUND. 3. fix when FIXED_ROOT is set and the root turns off mesh function, 2nd layer devices do not look for new parents. 4. add APIs esp_mesh_disconnect() and esp_mesh_connect(). 5. disconnect from parent/router when the DSSS channel in received beacon is different from the home channel. 6. remove nvs task to release 3k bytes memory.
1418 lines
53 KiB
C
1418 lines
53 KiB
C
// Copyright 2017-2018 Espressif Systems (Shanghai) PTE LTD
|
||
//
|
||
// Licensed under the Apache License, Version 2.0 (the "License");
|
||
// you may not use this file except in compliance with the License.
|
||
// You may obtain a copy of the License at
|
||
|
||
// http://www.apache.org/licenses/LICENSE-2.0
|
||
//
|
||
// Unless required by applicable law or agreed to in writing, software
|
||
// distributed under the License is distributed on an "AS IS" BASIS,
|
||
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
// See the License for the specific language governing permissions and
|
||
// limitations under the License.
|
||
|
||
/*
|
||
* Software Stack demonstrated:
|
||
* |------------------------------------------------------------------------------|
|
||
* | | |
|
||
* | | Application |
|
||
* | |-----------------------------------------------------------------|
|
||
* | | | Protocols: | | | | |
|
||
* | | Mesh Stack | HTTP, DNS, | | | Other | |
|
||
* | RTOS: | (Networking, | DHCP, ... | | | Components | |
|
||
* | (freeRTOS) | self-healing, |------------| | | | |
|
||
* | | flow control, | Network Stack: | | | |
|
||
* | | ...) | (LwIP) | | | |
|
||
* | |-----------------------------------| |---------------| |
|
||
* | | | |
|
||
* | | Wi-Fi Driver | |
|
||
* | |--------------------------------------------------| |
|
||
* | | |
|
||
* | | Platform HAL |
|
||
* |------------------------------------------------------------------------------|
|
||
*
|
||
* System Events delivery:
|
||
*
|
||
* |---------------|
|
||
* | | default handler
|
||
* | Wi-Fi stack | events |---------------------|
|
||
* | | -------------> | |
|
||
* |---------------| | |
|
||
* | event task |
|
||
* |---------------| events | |
|
||
* | | -------------> | |
|
||
* | LwIP stack | |---------------------|
|
||
* | |--------|
|
||
* |---------------| |
|
||
* | mesh event callback handler
|
||
* | |----------------------------|
|
||
* |-----> | |
|
||
* |---------------| | application |
|
||
* | | events | task |
|
||
* | mesh stack | -------------> | |
|
||
* | | |----------------------------|
|
||
* |---------------|
|
||
*
|
||
*
|
||
* Mesh Stack
|
||
*
|
||
* Mesh event defines almost all system events applications tasks need.
|
||
* Mesh event contains Wi-Fi connection states on station interface, children connection states on softAP interface and etc..
|
||
* Applications need to register a mesh event callback handler by API esp_mesh_set_config() firstly.
|
||
* This handler is to receive events posted from mesh stack and LwIP stack.
|
||
* Applications could add relative handler for each event.
|
||
* Examples:
|
||
* (1) Applications could use Wi-Fi station connect states to decide when to send data to its parent, to the root or to external IP network;
|
||
* (2) Applications could use Wi-Fi softAP states to decide when to send data to its children.
|
||
*
|
||
* In present implementation, applications are able to access mesh stack directly without having to go through LwIP stack.
|
||
* Applications use esp_mesh_send() and esp_mesh_recv() to send and receive messages over the mesh network.
|
||
* In mesh stack design, normal devices don't require LwIP stack. But since IDF hasn't supported system without initializing LwIP stack yet,
|
||
* applications still need to do LwIP initialization and two more things are required to be done
|
||
* (1) stop DHCP server on softAP interface by default
|
||
* (2) stop DHCP client on station interface by default.
|
||
* Examples:
|
||
* tcpip_adapter_init();
|
||
* tcpip_adapter_dhcps_stop(TCPIP_ADAPTER_IF_AP)；
|
||
* tcpip_adapter_dhcpc_stop(TCPIP_ADAPTER_IF_STA)；
|
||
*
|
||
* Over the mesh network, only the root is able to access external IP network.
|
||
* In application mesh event handler, once a device becomes a root, start DHCP client immediately whether DHCP is chosen.
|
||
*/
|
||
|
||
#ifndef __ESP_MESH_H__
|
||
#define __ESP_MESH_H__
|
||
|
||
#include "esp_err.h"
|
||
#include "esp_wifi.h"
|
||
#include "esp_wifi_types.h"
|
||
#include "esp_mesh_internal.h"
|
||
|
||
#ifdef __cplusplus
|
||
extern "C" {
|
||
#endif
|
||
|
||
/*******************************************************
|
||
* Constants
|
||
*******************************************************/
|
||
#define MESH_ROOT_LAYER (1) /**< root layer value */
|
||
#define MESH_MTU (1500) /**< max transmit unit(in bytes) */
|
||
#define MESH_MPS (1472) /**< max payload size(in bytes) */
|
||
/**
|
||
* @brief Mesh error code definition
|
||
*/
|
||
#define ESP_ERR_MESH_WIFI_NOT_START (ESP_ERR_MESH_BASE + 1) /**< Wi-Fi isn't started */
|
||
#define ESP_ERR_MESH_NOT_INIT (ESP_ERR_MESH_BASE + 2) /**< mesh isn't initialized */
|
||
#define ESP_ERR_MESH_NOT_CONFIG (ESP_ERR_MESH_BASE + 3) /**< mesh isn't configured */
|
||
#define ESP_ERR_MESH_NOT_START (ESP_ERR_MESH_BASE + 4) /**< mesh isn't started */
|
||
#define ESP_ERR_MESH_NOT_SUPPORT (ESP_ERR_MESH_BASE + 5) /**< not supported yet */
|
||
#define ESP_ERR_MESH_NOT_ALLOWED (ESP_ERR_MESH_BASE + 6) /**< operation is not allowed */
|
||
#define ESP_ERR_MESH_NO_MEMORY (ESP_ERR_MESH_BASE + 7) /**< out of memory */
|
||
#define ESP_ERR_MESH_ARGUMENT (ESP_ERR_MESH_BASE + 8) /**< illegal argument */
|
||
#define ESP_ERR_MESH_EXCEED_MTU (ESP_ERR_MESH_BASE + 9) /**< packet size exceeds MTU */
|
||
#define ESP_ERR_MESH_TIMEOUT (ESP_ERR_MESH_BASE + 10) /**< timeout */
|
||
#define ESP_ERR_MESH_DISCONNECTED (ESP_ERR_MESH_BASE + 11) /**< disconnected with parent on station interface */
|
||
#define ESP_ERR_MESH_QUEUE_FAIL (ESP_ERR_MESH_BASE + 12) /**< queue fail */
|
||
#define ESP_ERR_MESH_QUEUE_FULL (ESP_ERR_MESH_BASE + 13) /**< queue full */
|
||
#define ESP_ERR_MESH_NO_PARENT_FOUND (ESP_ERR_MESH_BASE + 14) /**< no parent found to join the mesh network */
|
||
#define ESP_ERR_MESH_NO_ROUTE_FOUND (ESP_ERR_MESH_BASE + 15) /**< no route found to forward the packet */
|
||
#define ESP_ERR_MESH_OPTION_NULL (ESP_ERR_MESH_BASE + 16) /**< no option found */
|
||
#define ESP_ERR_MESH_OPTION_UNKNOWN (ESP_ERR_MESH_BASE + 17) /**< unknown option */
|
||
#define ESP_ERR_MESH_XON_NO_WINDOW (ESP_ERR_MESH_BASE + 18) /**< no window for software flow control on upstream */
|
||
#define ESP_ERR_MESH_INTERFACE (ESP_ERR_MESH_BASE + 19) /**< low-level Wi-Fi interface error */
|
||
#define ESP_ERR_MESH_DISCARD_DUPLICATE (ESP_ERR_MESH_BASE + 20) /**< discard the packet due to the duplicate sequence number */
|
||
#define ESP_ERR_MESH_DISCARD (ESP_ERR_MESH_BASE + 21) /**< discard the packet */
|
||
#define ESP_ERR_MESH_VOTING (ESP_ERR_MESH_BASE + 22) /**< vote in progress */
|
||
|
||
/**
|
||
* @brief Flags bitmap for esp_mesh_send() and esp_mesh_recv()
|
||
*/
|
||
#define MESH_DATA_ENC (0x01) /**< data encrypted (Unimplemented) */
|
||
#define MESH_DATA_P2P (0x02) /**< point-to-point delivery over the mesh network */
|
||
#define MESH_DATA_FROMDS (0x04) /**< receive from external IP network */
|
||
#define MESH_DATA_TODS (0x08) /**< identify this packet is target to external IP network */
|
||
#define MESH_DATA_NONBLOCK (0x10) /**< esp_mesh_send() non-block */
|
||
#define MESH_DATA_DROP (0x20) /**< in the situation of the root having been changed, identify this packet can be dropped by new root */
|
||
#define MESH_DATA_GROUP (0x40) /**< identify this packet is target to a group address */
|
||
|
||
/**
|
||
* @brief Option definitions for esp_mesh_send() and esp_mesh_recv()
|
||
*/
|
||
#define MESH_OPT_SEND_GROUP (7) /**< data transmission by group; used with esp_mesh_send() and shall have payload */
|
||
#define MESH_OPT_RECV_DS_ADDR (8) /**< return a remote IP address; used with esp_mesh_send() and esp_mesh_recv() */
|
||
|
||
/**
|
||
* @brief Flag of mesh networking IE
|
||
*/
|
||
#define MESH_ASSOC_FLAG_VOTE_IN_PROGRESS (0x02) /**< vote in progress */
|
||
#define MESH_ASSOC_FLAG_NETWORK_FREE (0x08) /**< no root in current network */
|
||
#define MESH_ASSOC_FLAG_ROOTS_FOUND (0x20) /**< root conflict is found */
|
||
#define MESH_ASSOC_FLAG_ROOT_FIXED (0x40) /**< fixed root */
|
||
|
||
/*******************************************************
|
||
* Enumerations
|
||
*******************************************************/
|
||
/**
|
||
* @brief Enumerated list of mesh event id
|
||
*/
|
||
typedef enum {
|
||
MESH_EVENT_STARTED, /**< mesh is started */
|
||
MESH_EVENT_STOPPED, /**< mesh is stopped */
|
||
MESH_EVENT_CHANNEL_SWITCH, /**< channel switch */
|
||
MESH_EVENT_CHILD_CONNECTED, /**< a child is connected on softAP interface */
|
||
MESH_EVENT_CHILD_DISCONNECTED, /**< a child is disconnected on softAP interface */
|
||
MESH_EVENT_ROUTING_TABLE_ADD, /**< routing table is changed by adding newly joined children */
|
||
MESH_EVENT_ROUTING_TABLE_REMOVE, /**< routing table is changed by removing leave children */
|
||
MESH_EVENT_PARENT_CONNECTED, /**< parent is connected on station interface */
|
||
MESH_EVENT_PARENT_DISCONNECTED, /**< parent is disconnected on station interface */
|
||
MESH_EVENT_NO_PARENT_FOUND, /**< no parent found */
|
||
MESH_EVENT_LAYER_CHANGE, /**< layer changes over the mesh network */
|
||
MESH_EVENT_TODS_STATE, /**< state represents whether the root is able to access external IP network */
|
||
MESH_EVENT_VOTE_STARTED, /**< the process of voting a new root is started either by children or by the root */
|
||
MESH_EVENT_VOTE_STOPPED, /**< the process of voting a new root is stopped */
|
||
MESH_EVENT_ROOT_ADDRESS, /**< the root address is obtained. It is posted by mesh stack automatically. */
|
||
MESH_EVENT_ROOT_SWITCH_REQ, /**< root switch request sent from a new voted root candidate */
|
||
MESH_EVENT_ROOT_SWITCH_ACK, /**< root switch acknowledgment responds the above request sent from current root */
|
||
MESH_EVENT_ROOT_GOT_IP, /**< the root obtains the IP address. It is posted by LwIP stack automatically */
|
||
MESH_EVENT_ROOT_LOST_IP, /**< the root loses the IP address. It is posted by LwIP stack automatically */
|
||
MESH_EVENT_ROOT_ASKED_YIELD, /**< the root is asked yield by a more powerful existing root. If self organized is disabled
|
||
and this device is specified to be a root by users, users should set a new parent
|
||
for this device. if self organized is enabled, this device will find a new parent
|
||
by itself, users could ignore this event. */
|
||
MESH_EVENT_ROOT_FIXED, /**< when devices join a network, if the setting of Fixed Root for one device is different
|
||
from that of its parent, the device will update the setting the same as its parent's.
|
||
Fixed Root Setting of each device is variable as that setting changes of the root. */
|
||
MESH_EVENT_SCAN_DONE, /**< if self-organized networking is disabled, user can call esp_wifi_scan_start() to trigger
|
||
this event, and add the corresponding scan done handler in this event. */
|
||
MESH_EVENT_NETWORK_STATE, /**< network state, such as whether current mesh network has a root. */
|
||
MESH_EVENT_STOP_RECONNECTION, /**< the root stops reconnecting to the router and non-root devices stop reconnecting to their parents. */
|
||
MESH_EVENT_MAX,
|
||
} mesh_event_id_t;
|
||
|
||
/**
|
||
* @brief Device type
|
||
*/
|
||
typedef enum {
|
||
MESH_IDLE, /**< hasn't joined the mesh network yet */
|
||
MESH_ROOT, /**< the only sink of the mesh network. Has the ability to access external IP network */
|
||
MESH_NODE, /**< intermediate device. Has the ability to forward packets over the mesh network */
|
||
MESH_LEAF, /**< has no forwarding ability */
|
||
} mesh_type_t;
|
||
|
||
/**
|
||
* @brief Protocol of transmitted application data
|
||
*/
|
||
typedef enum {
|
||
MESH_PROTO_BIN, /**< binary */
|
||
MESH_PROTO_HTTP, /**< HTTP protocol */
|
||
MESH_PROTO_JSON, /**< JSON format */
|
||
MESH_PROTO_MQTT, /**< MQTT protocol */
|
||
} mesh_proto_t;
|
||
|
||
/**
|
||
* @brief For reliable transmission, mesh stack provides three type of services
|
||
*/
|
||
typedef enum {
|
||
MESH_TOS_P2P, /**< provide P2P (point-to-point) retransmission on mesh stack by default */
|
||
MESH_TOS_E2E, /**< provide E2E (end-to-end) retransmission on mesh stack (Unimplemented) */
|
||
MESH_TOS_DEF, /**< no retransmission on mesh stack */
|
||
} mesh_tos_t;
|
||
|
||
/**
|
||
* @brief Vote reason
|
||
*/
|
||
typedef enum {
|
||
MESH_VOTE_REASON_ROOT_INITIATED = 1, /**< vote is initiated by the root */
|
||
MESH_VOTE_REASON_CHILD_INITIATED, /**< vote is initiated by children */
|
||
} mesh_vote_reason_t;
|
||
|
||
/**
|
||
* @brief Mesh disconnect reason code
|
||
*/
|
||
typedef enum {
|
||
MESH_REASON_CYCLIC = 100, /**< cyclic is detected */
|
||
MESH_REASON_PARENT_IDLE, /**< parent is idle */
|
||
MESH_REASON_LEAF, /**< the connected device is changed to a leaf */
|
||
MESH_REASON_DIFF_ID, /**< in different mesh ID */
|
||
MESH_REASON_ROOTS, /**< root conflict is detected */
|
||
MESH_REASON_PARENT_STOPPED, /**< parent has stopped the mesh */
|
||
MESH_REASON_SCAN_FAIL, /**< scan fail */
|
||
MESH_REASON_IE_UNKNOWN, /**< unknown IE */
|
||
MESH_REASON_WAIVE_ROOT, /**< waive root */
|
||
MESH_REASON_PARENT_WORSE, /**< parent with very poor RSSI */
|
||
MESH_REASON_EMPTY_PASSWORD, /**< use an empty password to connect to an encrypted parent */
|
||
MESH_REASON_PARENT_UNENCRYPTED, /**< connect to an unencrypted parent/router */
|
||
} mesh_disconnect_reason_t;
|
||
|
||
/*******************************************************
|
||
* Structures
|
||
*******************************************************/
|
||
/**
|
||
* @brief IP address and port
|
||
*/
|
||
typedef struct {
|
||
ip4_addr_t ip4; /**< IP address */
|
||
uint16_t port; /**< port */
|
||
} __attribute__((packed)) mip_t;
|
||
|
||
/**
|
||
* @brief Mesh address
|
||
*/
|
||
typedef union {
|
||
uint8_t addr[6]; /**< mac address */
|
||
mip_t mip; /**< mip address */
|
||
} mesh_addr_t;
|
||
|
||
/**
|
||
* @brief Channel switch information
|
||
*/
|
||
typedef struct {
|
||
uint8_t channel; /**< new channel */
|
||
} mesh_event_channel_switch_t;
|
||
|
||
/**
|
||
* @brief Parent connected information
|
||
*/
|
||
typedef struct {
|
||
system_event_sta_connected_t connected; /**< parent information, same as Wi-Fi event SYSTEM_EVENT_STA_CONNECTED does */
|
||
uint8_t self_layer; /**< layer */
|
||
} mesh_event_connected_t;
|
||
|
||
/**
|
||
* @brief No parent found information
|
||
*/
|
||
typedef struct {
|
||
int scan_times; /**< scan times being through */
|
||
} mesh_event_no_parent_found_t;
|
||
|
||
/**
|
||
* @brief Layer change information
|
||
*/
|
||
typedef struct {
|
||
uint8_t new_layer; /**< new layer */
|
||
} mesh_event_layer_change_t;
|
||
|
||
/**
|
||
* @brief The reachability of the root to a DS (distribute system)
|
||
*/
|
||
typedef enum {
|
||
MESH_TODS_UNREACHABLE, /**< the root isn't able to access external IP network */
|
||
MESH_TODS_REACHABLE, /**< the root is able to access external IP network */
|
||
} mesh_event_toDS_state_t;
|
||
|
||
/**
|
||
* @brief vote started information
|
||
*/
|
||
typedef struct {
|
||
int reason; /**< vote reason, vote could be initiated by children or by the root itself */
|
||
int attempts; /**< max vote attempts before stopped */
|
||
mesh_addr_t rc_addr; /**< root address specified by users via API esp_mesh_waive_root() */
|
||
} mesh_event_vote_started_t;
|
||
|
||
/**
|
||
* @brief IP settings from LwIP stack
|
||
*/
|
||
typedef system_event_sta_got_ip_t mesh_event_root_got_ip_t;
|
||
|
||
/**
|
||
* @brief Root address
|
||
*/
|
||
typedef mesh_addr_t mesh_event_root_address_t;
|
||
|
||
/**
|
||
* @brief Parent disconnected information
|
||
*/
|
||
typedef system_event_sta_disconnected_t mesh_event_disconnected_t;
|
||
|
||
/**
|
||
* @brief Child connected information
|
||
*/
|
||
typedef system_event_ap_staconnected_t mesh_event_child_connected_t;
|
||
|
||
/**
|
||
* @brief Child disconnected information
|
||
*/
|
||
typedef system_event_ap_stadisconnected_t mesh_event_child_disconnected_t;
|
||
|
||
/**
|
||
* @brief Root switch request information
|
||
*/
|
||
typedef struct {
|
||
int reason; /**< root switch reason, generally root switch is initialized by users via API esp_mesh_waive_root() */
|
||
mesh_addr_t rc_addr; /**< the address of root switch requester */
|
||
} mesh_event_root_switch_req_t;
|
||
|
||
/**
|
||
* @brief Other powerful root address
|
||
*/
|
||
typedef struct {
|
||
int8_t rssi; /**< rssi with router */
|
||
uint16_t capacity; /**< the number of devices in current network */
|
||
uint8_t addr[6]; /**< other powerful root address */
|
||
} mesh_event_root_conflict_t;
|
||
|
||
/**
|
||
* @brief Routing table change
|
||
*/
|
||
typedef struct {
|
||
uint16_t rt_size_new; /**< the new value */
|
||
uint16_t rt_size_change; /**< the changed value */
|
||
} mesh_event_routing_table_change_t;
|
||
|
||
/**
|
||
* @brief Root fixed
|
||
*/
|
||
typedef struct {
|
||
bool is_fixed; /**< status */
|
||
} mesh_event_root_fixed_t;
|
||
|
||
/**
|
||
* @brief Scan done event information
|
||
*/
|
||
typedef struct {
|
||
uint8_t number; /**< the number of APs scanned */
|
||
} mesh_event_scan_done_t;
|
||
|
||
/**
|
||
* @brief Network state information
|
||
*/
|
||
typedef struct {
|
||
bool is_rootless; /**< whether current mesh network has a root */
|
||
} mesh_event_network_state_t;
|
||
|
||
/**
|
||
* @brief Mesh event information
|
||
*/
|
||
typedef union {
|
||
mesh_event_channel_switch_t channel_switch; /**< channel switch */
|
||
mesh_event_child_connected_t child_connected; /**< child connected */
|
||
mesh_event_child_disconnected_t child_disconnected; /**< child disconnected */
|
||
mesh_event_routing_table_change_t routing_table; /**< routing table change */
|
||
mesh_event_connected_t connected; /**< parent connected */
|
||
mesh_event_disconnected_t disconnected; /**< parent disconnected */
|
||
mesh_event_no_parent_found_t no_parent; /**< no parent found */
|
||
mesh_event_layer_change_t layer_change; /**< layer change */
|
||
mesh_event_toDS_state_t toDS_state; /**< toDS state, devices shall check this state firstly before trying to send packets to
|
||
external IP network. This state indicates right now whether the root is capable of sending
|
||
packets out. If not, devices had better to wait until this state changes to be
|
||
MESH_TODS_REACHABLE. */
|
||
mesh_event_vote_started_t vote_started; /**< vote started */
|
||
mesh_event_root_got_ip_t got_ip; /**< root obtains IP address */
|
||
mesh_event_root_address_t root_addr; /**< root address */
|
||
mesh_event_root_switch_req_t switch_req; /**< root switch request */
|
||
mesh_event_root_conflict_t root_conflict; /**< other powerful root */
|
||
mesh_event_root_fixed_t root_fixed; /**< fixed root */
|
||
mesh_event_scan_done_t scan_done; /**< scan done */
|
||
mesh_event_network_state_t network_state; /**< network state, such as whether current mesh network has a root. */
|
||
} mesh_event_info_t;
|
||
|
||
/**
|
||
* @brief Mesh event
|
||
*/
|
||
typedef struct {
|
||
mesh_event_id_t id; /**< mesh event id */
|
||
mesh_event_info_t info; /**< mesh event info */
|
||
} mesh_event_t;
|
||
|
||
/**
|
||
* @brief Mesh event callback handler prototype definition
|
||
*
|
||
* @param event mesh_event_t
|
||
*/
|
||
typedef void (*mesh_event_cb_t)(mesh_event_t event);
|
||
|
||
/**
|
||
* @brief Mesh option
|
||
*/
|
||
typedef struct {
|
||
uint8_t type; /**< option type */
|
||
uint16_t len; /**< option length */
|
||
uint8_t *val; /**< option value */
|
||
} __attribute__((packed)) mesh_opt_t;
|
||
|
||
/**
|
||
* @brief Mesh data for esp_mesh_send() and esp_mesh_recv()
|
||
*/
|
||
typedef struct {
|
||
uint8_t *data; /**< data */
|
||
uint16_t size; /**< data size */
|
||
mesh_proto_t proto; /**< data protocol */
|
||
mesh_tos_t tos; /**< data type of service */
|
||
} mesh_data_t;
|
||
|
||
/**
|
||
* @brief Router configuration
|
||
*/
|
||
typedef struct {
|
||
uint8_t ssid[32]; /**< SSID */
|
||
uint8_t ssid_len; /**< length of SSID */
|
||
uint8_t bssid[6]; /**< BSSID, if router is hidden, this value is mandatory */
|
||
uint8_t password[64]; /**< password */
|
||
} mesh_router_t;
|
||
|
||
/**
|
||
* @brief Mesh softAP configuration
|
||
*/
|
||
typedef struct {
|
||
uint8_t password[64]; /**< mesh softAP password */
|
||
uint8_t max_connection; /**< max number of stations allowed to connect in, max 10 */
|
||
} mesh_ap_cfg_t;
|
||
|
||
/**
|
||
* @brief Mesh initialization configuration
|
||
*/
|
||
typedef struct {
|
||
uint8_t channel; /**< channel, the mesh network on */
|
||
mesh_event_cb_t event_cb; /**< mesh event callback */
|
||
mesh_addr_t mesh_id; /**< mesh network identification */
|
||
mesh_router_t router; /**< router configuration */
|
||
mesh_ap_cfg_t mesh_ap; /**< mesh softAP configuration */
|
||
const mesh_crypto_funcs_t *crypto_funcs; /**< crypto functions */
|
||
} mesh_cfg_t;
|
||
|
||
/**
|
||
* @brief Vote address configuration
|
||
*/
|
||
typedef union {
|
||
int attempts; /**< max vote attempts before a new root is elected automatically by mesh network. (min:15, 15 by default) */
|
||
mesh_addr_t rc_addr; /**< a new root address specified by users for API esp_mesh_waive_root() */
|
||
} mesh_rc_config_t;
|
||
|
||
/**
|
||
* @brief Vote
|
||
*/
|
||
typedef struct {
|
||
float percentage; /**< vote percentage threshold for approval of being a root */
|
||
bool is_rc_specified; /**< if true, rc_addr shall be specified (Unimplemented).
|
||
if false, attempts value shall be specified to make network start root election. */
|
||
mesh_rc_config_t config; /**< vote address configuration */
|
||
} mesh_vote_t;
|
||
|
||
/**
|
||
* @brief The number of packets pending in the queue waiting to be sent by the mesh stack
|
||
*/
|
||
typedef struct {
|
||
int to_parent; /**< to parent queue */
|
||
int to_parent_p2p; /**< to parent (P2P) queue */
|
||
int to_child; /**< to child queue */
|
||
int to_child_p2p; /**< to child (P2P) queue */
|
||
int mgmt; /**< management queue */
|
||
int broadcast; /**< broadcast and multicast queue */
|
||
} mesh_tx_pending_t;
|
||
|
||
/**
|
||
* @brief The number of packets available in the queue waiting to be received by applications
|
||
*/
|
||
typedef struct {
|
||
int toDS; /**< to external DS */
|
||
int toSelf; /**< to self */
|
||
} mesh_rx_pending_t;
|
||
|
||
/*******************************************************
|
||
* Variable Declaration
|
||
*******************************************************/
|
||
/* mesh IE crypto callback function */
|
||
extern const mesh_crypto_funcs_t g_wifi_default_mesh_crypto_funcs;
|
||
|
||
/* mesh event callback handler */
|
||
extern mesh_event_cb_t g_mesh_event_cb;
|
||
|
||
#define MESH_INIT_CONFIG_DEFAULT() { \
|
||
.crypto_funcs = &g_wifi_default_mesh_crypto_funcs, \
|
||
}
|
||
|
||
/*******************************************************
|
||
* Function Definitions
|
||
*******************************************************/
|
||
/**
|
||
* @brief Mesh initialization
|
||
* - Check whether Wi-Fi is started.
|
||
* - Initialize mesh global variables with default values.
|
||
*
|
||
* @attention This API shall be called after Wi-Fi is started.
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_init(void);
|
||
|
||
/**
|
||
* @brief Mesh de-initialization
|
||
*
|
||
* - Release resources and stop the mesh
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_deinit(void);
|
||
|
||
/**
|
||
* @brief Start mesh
|
||
* - Initialize mesh IE.
|
||
* - Start mesh network management service.
|
||
* - Create TX and RX queues according to the configuration.
|
||
* - Register mesh packets receive callback.
|
||
*
|
||
* @attention This API shall be called after mesh initialization and configuration.
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
* - ESP_ERR_MESH_NOT_INIT
|
||
* - ESP_ERR_MESH_NOT_CONFIG
|
||
* - ESP_ERR_MESH_NO_MEMORY
|
||
*/
|
||
esp_err_t esp_mesh_start(void);
|
||
|
||
/**
|
||
* @brief Stop mesh
|
||
* - Deinitialize mesh IE.
|
||
* - Disconnect with current parent.
|
||
* - Disassociate all currently associated children.
|
||
* - Stop mesh network management service.
|
||
* - Unregister mesh packets receive callback.
|
||
* - Delete TX and RX queues.
|
||
* - Release resources.
|
||
* - Restore Wi-Fi softAP to default settings if Wi-Fi dual mode is enabled.
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_stop(void);
|
||
|
||
/**
|
||
* @brief Send a packet over the mesh network
|
||
* - Send a packet to any device in the mesh network.
|
||
* - Send a packet to external IP network.
|
||
*
|
||
* @attention This API is not reentrant.
|
||
*
|
||
* @param[in] to the address of the final destination of the packet
|
||
* - If the packet is to the root, set this parameter to NULL.
|
||
* - If the packet is to an external IP network, set this parameter to the IPv4:PORT combination.
|
||
* This packet will be delivered to the root firstly, then the root will forward this packet to the final IP server address.
|
||
* @param[in] data pointer to a sending mesh packet
|
||
* - Field proto should be set to data protocol in use (default is MESH_PROTO_BIN for binary).
|
||
* - Field tos should be set to transmission tos (type of service) in use (default is MESH_TOS_P2P for point-to-point reliable).
|
||
* @param[in] flag bitmap for data sent
|
||
* - Speed up the route search
|
||
* - If the packet is to the root and "to" parameter is NULL, set this parameter to 0.
|
||
* - If the packet is to an internal device, MESH_DATA_P2P should be set.
|
||
* - If the packet is to the root ("to" parameter isn't NULL) or to external IP network, MESH_DATA_TODS should be set.
|
||
* - If the packet is from the root to an internal device, MESH_DATA_FROMDS should be set.
|
||
* - Specify whether this API is block or non-block, block by default
|
||
* - If needs non-block, MESH_DATA_NONBLOCK should be set.
|
||
* - In the situation of the root change, MESH_DATA_DROP identifies this packet can be dropped by the new root
|
||
* for upstream data to external IP network, we try our best to avoid data loss caused by the root change, but
|
||
* there is a risk that the new root is running out of memory because most of memory is occupied by the pending data which
|
||
* isn't read out in time by esp_mesh_recv_toDS().
|
||
*
|
||
* Generally, we suggest esp_mesh_recv_toDS() is called after a connection with IP network is created. Thus data outgoing
|
||
* to external IP network via socket is just from reading esp_mesh_recv_toDS() which avoids unnecessary memory copy.
|
||
*
|
||
* @param[in] opt options
|
||
* - In case of sending a packet to a certain group, MESH_OPT_SEND_GROUP is a good choice.
|
||
* In this option, the value field should be set to the target receiver addresses in this group.
|
||
* - Root sends a packet to an internal device, this packet is from external IP network in case the receiver device responds
|
||
* this packet, MESH_OPT_RECV_DS_ADDR is required to attach the target DS address.
|
||
* @param[in] opt_count option count
|
||
* - Currently, this API only takes one option, so opt_count is only supported to be 1.
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
* - ESP_ERR_MESH_NOT_START
|
||
* - ESP_ERR_MESH_DISCONNECTED
|
||
* - ESP_ERR_MESH_OPT_UNKNOWN
|
||
* - ESP_ERR_MESH_EXCEED_MTU
|
||
* - ESP_ERR_MESH_NO_MEMORY
|
||
* - ESP_ERR_MESH_TIMEOUT
|
||
* - ESP_ERR_MESH_QUEUE_FULL
|
||
* - ESP_ERR_MESH_NO_ROUTE_FOUND
|
||
* - ESP_ERR_MESH_DISCARD
|
||
*/
|
||
esp_err_t esp_mesh_send(const mesh_addr_t *to, const mesh_data_t *data,
|
||
int flag, const mesh_opt_t opt[], int opt_count);
|
||
|
||
/**
|
||
* @brief Receive a packet targeted to self over the mesh network
|
||
*
|
||
* @attention Mesh RX queue should be checked regularly to avoid running out of memory.
|
||
* - Use esp_mesh_get_rx_pending() to check the number of packets available in the queue waiting
|
||
* to be received by applications.
|
||
*
|
||
* @param[out] from the address of the original source of the packet
|
||
* @param[out] data pointer to the received mesh packet
|
||
* - Field proto is the data protocol in use. Should follow it to parse the received data.
|
||
* - Field tos is the transmission tos (type of service) in use.
|
||
* @param[in] timeout_ms wait time if a packet isn't immediately available (0:no wait, portMAX_DELAY:wait forever)
|
||
* @param[out] flag bitmap for data received
|
||
* - MESH_DATA_FROMDS represents data from external IP network
|
||
* - MESH_DATA_TODS represents data directed upward within the mesh network
|
||
*
|
||
* flag could be MESH_DATA_FROMDS or MESH_DATA_TODS.
|
||
* @param[out] opt options desired to receive
|
||
* - MESH_OPT_RECV_DS_ADDR attaches the DS address
|
||
* @param[in] opt_count option count desired to receive
|
||
* - Currently, this API only takes one option, so opt_count is only supported to be 1.
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
* - ESP_ERR_MESH_NOT_START
|
||
* - ESP_ERR_MESH_TIMEOUT
|
||
* - ESP_ERR_MESH_DISCARD
|
||
*/
|
||
esp_err_t esp_mesh_recv(mesh_addr_t *from, mesh_data_t *data, int timeout_ms,
|
||
int *flag, mesh_opt_t opt[], int opt_count);
|
||
|
||
/**
|
||
* @brief Receive a packet targeted to external IP network
|
||
* - Root uses this API to receive packets destined to external IP network
|
||
* - Root forwards the received packets to the final destination via socket.
|
||
* - If no socket connection is ready to send out the received packets and this esp_mesh_recv_toDS()
|
||
* hasn't been called by applications, packets from the whole mesh network will be pending in toDS queue.
|
||
*
|
||
* Use esp_mesh_get_rx_pending() to check the number of packets available in the queue waiting
|
||
* to be received by applications in case of running out of memory in the root.
|
||
*
|
||
* Using esp_mesh_set_xon_qsize() users may configure the RX queue size, default:32. If this size is too large,
|
||
* and esp_mesh_recv_toDS() isn't called in time, there is a risk that a great deal of memory is occupied
|
||
* by the pending packets. If this size is too small, it will impact the efficiency on upstream. How to
|
||
* decide this value depends on the specific application scenarios.
|
||
*
|
||
* @attention This API is only called by the root.
|
||
*
|
||
* @param[out] from the address of the original source of the packet
|
||
* @param[out] to the address contains remote IP address and port (IPv4:PORT)
|
||
* @param[out] data pointer to the received packet
|
||
* - Contain the protocol and applications should follow it to parse the data.
|
||
* @param[in] timeout_ms wait time if a packet isn't immediately available (0:no wait, portMAX_DELAY:wait forever)
|
||
* @param[out] flag bitmap for data received
|
||
* - MESH_DATA_TODS represents the received data target to external IP network. Root shall forward this data to external IP network via the association with router.
|
||
*
|
||
* flag could be MESH_DATA_TODS.
|
||
* @param[out] opt options desired to receive
|
||
* @param[in] opt_count option count desired to receive
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
* - ESP_ERR_MESH_NOT_START
|
||
* - ESP_ERR_MESH_TIMEOUT
|
||
* - ESP_ERR_MESH_DISCARD
|
||
*/
|
||
esp_err_t esp_mesh_recv_toDS(mesh_addr_t *from, mesh_addr_t *to,
|
||
mesh_data_t *data, int timeout_ms, int *flag, mesh_opt_t opt[],
|
||
int opt_count);
|
||
|
||
/**
|
||
* @brief Set mesh stack configuration
|
||
* - Use MESH_INIT_CONFIG_DEFAULT() to initialize the default values, mesh IE is encrypted by default.
|
||
* - Mesh network is established on a fixed channel (1-14).
|
||
* - Mesh event callback is mandatory.
|
||
* - Mesh ID is an identifier of an MBSS. Nodes with the same mesh ID can communicate with each other.
|
||
* - Regarding to the router configuration, if the router is hidden, BSSID field is mandatory.
|
||
*
|
||
* If BSSID field isn't set and there exists more than one router with same SSID, there is a risk that more
|
||
* roots than one connected with different BSSID will appear. It means more than one mesh network is established
|
||
* with the same mesh ID.
|
||
*
|
||
* Root conflict function could eliminate redundant roots connected with the same BSSID, but couldn't handle roots
|
||
* connected with different BSSID. Because users might have such requirements of setting up routers with same SSID
|
||
* for the future replacement. But in that case, if the above situations happen, please make sure applications
|
||
* implement forward functions on the root to guarantee devices in different mesh networks can communicate with each other.
|
||
* max_connection of mesh softAP is limited by the max number of Wi-Fi softAP supported (max:10).
|
||
*
|
||
* @attention This API shall be called before mesh is started after mesh is initialized.
|
||
*
|
||
* @param[in] config pointer to mesh stack configuration
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
* - ESP_ERR_MESH_NOT_ALLOWED
|
||
*/
|
||
esp_err_t esp_mesh_set_config(const mesh_cfg_t *config);
|
||
|
||
/**
|
||
* @brief Get mesh stack configuration
|
||
*
|
||
* @param[out] config pointer to mesh stack configuration
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_get_config(mesh_cfg_t *config);
|
||
|
||
/**
|
||
* @brief Get router configuration
|
||
*
|
||
* @attention This API is used to dynamically modify the router configuration after mesh is configured.
|
||
*
|
||
* @param[in] router pointer to router configuration
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_set_router(const mesh_router_t *router);
|
||
|
||
/**
|
||
* @brief Get router configuration
|
||
*
|
||
* @param[out] router pointer to router configuration
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_get_router(mesh_router_t *router);
|
||
|
||
/**
|
||
* @brief Set mesh network ID
|
||
*
|
||
* @attention This API is used to dynamically modify the mesh network ID.
|
||
*
|
||
* @param[in] id pointer to mesh network ID
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT: invalid argument
|
||
*/
|
||
esp_err_t esp_mesh_set_id(const mesh_addr_t *id);
|
||
|
||
/**
|
||
* @brief Get mesh network ID
|
||
*
|
||
* @param[out] id pointer to mesh network ID
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_get_id(mesh_addr_t *id);
|
||
|
||
/**
|
||
* @brief Designate device type over the mesh network
|
||
* - MESH_ROOT: designates the root node for a mesh network
|
||
* - MESH_LEAF: designates a device as a standalone Wi-Fi station
|
||
*
|
||
* @param[in] type device type
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_NOT_ALLOWED
|
||
*/
|
||
esp_err_t esp_mesh_set_type(mesh_type_t type);
|
||
|
||
/**
|
||
* @brief Get device type over mesh network
|
||
*
|
||
* @attention This API shall be called after having received the event MESH_EVENT_PARENT_CONNECTED.
|
||
*
|
||
* @return mesh type
|
||
*
|
||
*/
|
||
mesh_type_t esp_mesh_get_type(void);
|
||
|
||
/**
|
||
* @brief Set network max layer value (max:25, default:25)
|
||
* - Network max layer limits the max hop count.
|
||
*
|
||
* @attention This API shall be called before mesh is started.
|
||
*
|
||
* @param[in] max_layer max layer value
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
* - ESP_ERR_MESH_NOT_ALLOWED
|
||
*/
|
||
esp_err_t esp_mesh_set_max_layer(int max_layer);
|
||
|
||
/**
|
||
* @brief Get max layer value
|
||
*
|
||
* @return max layer value
|
||
*/
|
||
int esp_mesh_get_max_layer(void);
|
||
|
||
/**
|
||
* @brief Set mesh softAP password
|
||
*
|
||
* @attention This API shall be called before mesh is started.
|
||
*
|
||
* @param[in] pwd pointer to the password
|
||
* @param[in] len password length
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
* - ESP_ERR_MESH_NOT_ALLOWED
|
||
*/
|
||
esp_err_t esp_mesh_set_ap_password(const uint8_t *pwd, int len);
|
||
|
||
/**
|
||
* @brief Set mesh softAP authentication mode
|
||
*
|
||
* @attention This API shall be called before mesh is started.
|
||
*
|
||
* @param[in] authmode authentication mode
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
* - ESP_ERR_MESH_NOT_ALLOWED
|
||
*/
|
||
esp_err_t esp_mesh_set_ap_authmode(wifi_auth_mode_t authmode);
|
||
|
||
/**
|
||
* @brief Get mesh softAP authentication mode
|
||
*
|
||
* @return authentication mode
|
||
*/
|
||
wifi_auth_mode_t esp_mesh_get_ap_authmode(void);
|
||
|
||
/**
|
||
* @brief Set mesh softAP max connection value
|
||
*
|
||
* @attention This API shall be called before mesh is started.
|
||
*
|
||
* @param[in] connections the number of max connections
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_set_ap_connections(int connections);
|
||
|
||
/**
|
||
* @brief Get mesh softAP max connection configuration
|
||
*
|
||
* @return the number of max connections
|
||
*/
|
||
int esp_mesh_get_ap_connections(void);
|
||
|
||
/**
|
||
* @brief Get current layer value over the mesh network
|
||
*
|
||
* @attention This API shall be called after having received the event MESH_EVENT_PARENT_CONNECTED.
|
||
*
|
||
* @return layer value
|
||
*
|
||
*/
|
||
int esp_mesh_get_layer(void);
|
||
|
||
/**
|
||
* @brief Get the parent BSSID
|
||
*
|
||
* @attention This API shall be called after having received the event MESH_EVENT_PARENT_CONNECTED.
|
||
*
|
||
* @param[out] bssid pointer to parent BSSID
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_get_parent_bssid(mesh_addr_t *bssid);
|
||
|
||
/**
|
||
* @brief Return whether the device is the root node of the network
|
||
*
|
||
* @return true/false
|
||
*/
|
||
bool esp_mesh_is_root(void);
|
||
|
||
/**
|
||
* @brief Enable/disable self-organized networking
|
||
* - Self-organized networking has three main functions:
|
||
* select the root node;
|
||
* find a preferred parent;
|
||
* initiate reconnection if a disconnection is detected.
|
||
* - Self-organized networking is enabled by default.
|
||
* - If self-organized is disabled, users should set a parent for the device via esp_mesh_set_parent().
|
||
*
|
||
* @attention This API is used to dynamically modify whether to enable the self organizing.
|
||
*
|
||
* @param[in] enable enable or disable self-organized networking
|
||
* @param[in] select_parent Only valid when self-organized networking is enabled.
|
||
* - if select_parent is set to true, the root will give up its mesh root status and search for a new parent
|
||
* like other non-root devices.
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_set_self_organized(bool enable, bool select_parent);
|
||
|
||
/**
|
||
* @brief Return whether enable self-organized networking or not
|
||
*
|
||
* @return true/false
|
||
*/
|
||
bool esp_mesh_get_self_organized(void);
|
||
|
||
/**
|
||
* @brief Cause the root device to give up (waive) its mesh root status
|
||
* - A device is elected root primarily based on RSSI from the external router.
|
||
* - If external router conditions change, users can call this API to perform a root switch.
|
||
* - In this API, users could specify a desired root address to replace itself or specify an attempts value
|
||
* to ask current root to initiate a new round of voting. During the voting, a better root candidate would
|
||
* be expected to find to replace the current one.
|
||
* - If no desired root candidate, the vote will try a specified number of attempts (at least 15). If no better
|
||
* root candidate is found, keep the current one. If a better candidate is found, the new better one will
|
||
* send a root switch request to the current root, current root will respond with a root switch acknowledgment.
|
||
* - After that, the new candidate will connect to the router to be a new root, the previous root will disconnect
|
||
* with the router and choose another parent instead.
|
||
*
|
||
* Root switch is completed with minimal disruption to the whole mesh network.
|
||
*
|
||
* @attention This API is only called by the root.
|
||
*
|
||
* @param[in] vote vote configuration
|
||
* - If this parameter is set NULL, the vote will perform the default 15 times.
|
||
*
|
||
* - Field percentage threshold is 0.9 by default.
|
||
* - Field is_rc_specified shall be false.
|
||
* - Field attempts shall be at least 15 times.
|
||
* @param[in] reason only accept MESH_VOTE_REASON_ROOT_INITIATED for now
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_QUEUE_FULL
|
||
* - ESP_ERR_MESH_DISCARD
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_waive_root(const mesh_vote_t *vote, int reason);
|
||
|
||
/**
|
||
* @brief Set vote percentage threshold for approval of being a root
|
||
* - During the networking, only obtaining vote percentage reaches this threshold,
|
||
* the device could be a root.
|
||
*
|
||
* @attention This API shall be called before mesh is started.
|
||
*
|
||
* @param[in] percentage vote percentage threshold
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_set_vote_percentage(float percentage);
|
||
|
||
/**
|
||
* @brief Get vote percentage threshold for approval of being a root
|
||
*
|
||
* @return percentage threshold
|
||
*/
|
||
float esp_mesh_get_vote_percentage(void);
|
||
|
||
/**
|
||
* @brief Set mesh softAP associate expired time
|
||
* - If mesh softAP hasn't received any data from an associated child within this time,
|
||
* mesh softAP will take this child inactive and disassociate it.
|
||
*
|
||
* @param[in] seconds the expired time
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_set_ap_assoc_expire(int seconds);
|
||
|
||
/**
|
||
* @brief Get mesh softAP associate expired time
|
||
*
|
||
* @return seconds
|
||
*/
|
||
int esp_mesh_get_ap_assoc_expire(void);
|
||
|
||
/**
|
||
* @brief Get total number of devices in current network (including the root)
|
||
*
|
||
* @attention The returned value might be incorrect when the network is changing.
|
||
**
|
||
* @return total number of devices (including the root)
|
||
*/
|
||
int esp_mesh_get_total_node_num(void);
|
||
|
||
/**
|
||
* @brief Get the number of devices in this device's sub-network (including self)
|
||
*
|
||
* @return the number of devices over this device's sub-network (including self)
|
||
*/
|
||
int esp_mesh_get_routing_table_size(void);
|
||
|
||
/**
|
||
* @brief Get routing table of this device's sub-network (including itself)
|
||
*
|
||
* @param[out] mac pointer to routing table
|
||
* @param[in] len routing table size(in bytes)
|
||
* @param[out] size pointer to the number of devices in routing table (including itself)
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_get_routing_table(mesh_addr_t *mac, int len, int *size);
|
||
|
||
/**
|
||
* @brief Post the toDS state to the mesh stack
|
||
*
|
||
* @attention This API is only for the root.
|
||
*
|
||
* @param[in] reachable this state represents whether the root is able to access external IP network
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_post_toDS_state(bool reachable);
|
||
|
||
/**
|
||
* @brief Return the number of packets pending in the queue waiting to be sent by the mesh stack
|
||
*
|
||
* @param[out] pending pointer to the TX pending
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_get_tx_pending(mesh_tx_pending_t *pending);
|
||
|
||
/**
|
||
* @brief Return the number of packets available in the queue waiting to be received by applications
|
||
*
|
||
* @param[out] pending pointer to the RX pending
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_get_rx_pending(mesh_rx_pending_t *pending);
|
||
|
||
/**
|
||
* @brief Return the number of packets could be accepted from the specified address
|
||
*
|
||
* @param[in] addr self address or an associate children address
|
||
* @param[out] xseqno_in sequence number of the last received packet from the specified address
|
||
*
|
||
* @return the number of upQ for a certain address
|
||
*/
|
||
int esp_mesh_available_txupQ_num(const mesh_addr_t *addr, uint32_t *xseqno_in);
|
||
|
||
/**
|
||
* @brief Set the number of queue
|
||
*
|
||
* @attention This API shall be called before mesh is started.
|
||
*
|
||
* @param[in] qsize default:32 (min:16)
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_set_xon_qsize(int qsize);
|
||
|
||
/**
|
||
* @brief Get queue size
|
||
*
|
||
* @return the number of queue
|
||
*/
|
||
int esp_mesh_get_xon_qsize(void);
|
||
|
||
/**
|
||
* @brief Set whether allow more than one root existing in one network
|
||
*
|
||
* @param[in] allowed allow or not
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_WIFI_ERR_NOT_INIT
|
||
* - ESP_WIFI_ERR_NOT_START
|
||
*/
|
||
esp_err_t esp_mesh_allow_root_conflicts(bool allowed);
|
||
|
||
/**
|
||
* @brief Check whether allow more than one root to exist in one network
|
||
*
|
||
* @return true/false
|
||
*/
|
||
bool esp_mesh_is_root_conflicts_allowed(void);
|
||
|
||
/**
|
||
* @brief Set group ID addresses
|
||
*
|
||
* @param[in] addr pointer to new group ID addresses
|
||
* @param[in] num the number of group ID addresses
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_MESH_ERR_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_set_group_id(const mesh_addr_t *addr, int num);
|
||
|
||
/**
|
||
* @brief Delete group ID addresses
|
||
*
|
||
* @param[in] addr pointer to deleted group ID address
|
||
* @param[in] num the number of group ID addresses
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_MESH_ERR_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_delete_group_id(const mesh_addr_t *addr, int num);
|
||
|
||
/**
|
||
* @brief Get the number of group ID addresses
|
||
*
|
||
* @return the number of group ID addresses
|
||
*/
|
||
int esp_mesh_get_group_num(void);
|
||
|
||
/**
|
||
* @brief Get group ID addresses
|
||
*
|
||
* @param[out] addr pointer to group ID addresses
|
||
* @param[in] num the number of group ID addresses
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_MESH_ERR_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_get_group_list(mesh_addr_t *addr, int num);
|
||
|
||
/**
|
||
* @brief Check whether the specified group address is my group
|
||
*
|
||
* @return true/false
|
||
*/
|
||
bool esp_mesh_is_my_group(const mesh_addr_t *addr);
|
||
|
||
/**
|
||
* @brief Set mesh network capacity
|
||
*
|
||
* @attention This API shall be called before mesh is started.
|
||
*
|
||
* @param[in] num mesh network capacity
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_NOT_ALLOWED
|
||
* - ESP_MESH_ERR_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_set_capacity_num(int num);
|
||
|
||
/**
|
||
* @brief Get mesh network capacity
|
||
*
|
||
* @return mesh network capacity
|
||
*/
|
||
int esp_mesh_get_capacity_num(void);
|
||
|
||
/**
|
||
* @brief Set mesh IE crypto functions
|
||
*
|
||
* @attention This API can be called at any time after mesh is initialized.
|
||
*
|
||
* @param[in] crypto_funcs crypto functions for mesh IE
|
||
* - If crypto_funcs is set to NULL, mesh IE is no longer encrypted.
|
||
* @return
|
||
* - ESP_OK
|
||
*/
|
||
esp_err_t esp_mesh_set_ie_crypto_funcs(const mesh_crypto_funcs_t *crypto_funcs);
|
||
|
||
/**
|
||
* @brief Set mesh IE crypto key
|
||
*
|
||
* @attention This API can be called at any time after mesh is initialized.
|
||
*
|
||
* @param[in] key ASCII crypto key
|
||
* @param[in] len length in bytes, range:8~64
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_MESH_ERR_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_set_ie_crypto_key(const char *key, int len);
|
||
|
||
/**
|
||
* @brief Get mesh IE crypto key
|
||
*
|
||
* @param[out] key ASCII crypto key
|
||
* @param[in] len length in bytes, range:8~64
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_MESH_ERR_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_get_ie_crypto_key(char *key, int len);
|
||
|
||
/**
|
||
* @brief Set delay time before starting root healing
|
||
*
|
||
* @param[in] delay_ms delay time in milliseconds
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
*/
|
||
esp_err_t esp_mesh_set_root_healing_delay(int delay_ms);
|
||
|
||
/**
|
||
* @brief Get delay time before network starts root healing
|
||
*
|
||
* @return delay time in milliseconds
|
||
*/
|
||
int esp_mesh_get_root_healing_delay(void);
|
||
|
||
/**
|
||
* @brief Set mesh event callback
|
||
*
|
||
* @param[in] event_cb mesh event call back
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
*/
|
||
esp_err_t esp_mesh_set_event_cb(const mesh_event_cb_t event_cb);
|
||
|
||
/**
|
||
* @brief Enable network Fixed Root Setting
|
||
* - Enabling fixed root disables automatic election of the root node via voting.
|
||
* - All devices in the network shall use the same Fixed Root Setting (enabled or disabled).
|
||
* - If Fixed Root is enabled, users should make sure a root node is designated for the network.
|
||
*
|
||
* @param[in] enable enable or not
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
*/
|
||
esp_err_t esp_mesh_fix_root(bool enable);
|
||
|
||
/**
|
||
* @brief Check whether network Fixed Root Setting is enabled
|
||
* - Enable/disable network Fixed Root Setting by API esp_mesh_fix_root().
|
||
* - Network Fixed Root Setting also changes with the "flag" value in parent networking IE.
|
||
*
|
||
* @return true/false
|
||
*/
|
||
bool esp_mesh_is_root_fixed(void);
|
||
|
||
/**
|
||
* @brief Set a specified parent for the device
|
||
*
|
||
* @attention This API can be called at any time after mesh is configured.
|
||
*
|
||
* @param[in] parent parent configuration, the SSID and the channel of the parent are mandatory.
|
||
* - If the BSSID is set, make sure that the SSID and BSSID represent the same parent,
|
||
* otherwise the device will never find this specified parent.
|
||
* @param[in] parent_mesh_id parent mesh ID,
|
||
* - If this value is not set, the original mesh ID is used.
|
||
* @param[in] my_type mesh type
|
||
* - If the parent set for the device is the same as the router in the network configuration,
|
||
* then my_type shall set MESH_ROOT and my_layer shall set MESH_ROOT_LAYER.
|
||
* @param[in] my_layer mesh layer
|
||
* - my_layer of the device may change after joining the network.
|
||
* - If my_type is set MESH_NODE, my_layer shall be greater than MESH_ROOT_LAYER.
|
||
* - If my_type is set MESH_LEAF, the device becomes a standalone Wi-Fi station and no longer
|
||
* has the ability to extend the network.
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_ARGUMENT
|
||
* - ESP_ERR_MESH_NOT_CONFIG
|
||
*/
|
||
esp_err_t esp_mesh_set_parent(const wifi_config_t *parent, const mesh_addr_t *parent_mesh_id, mesh_type_t my_type, int my_layer);
|
||
|
||
/**
|
||
* @brief Get mesh networking IE length of one AP
|
||
*
|
||
* @param[out] len mesh networking IE length
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_WIFI_NOT_INIT
|
||
* - ESP_ERR_WIFI_ARG
|
||
* - ESP_ERR_WIFI_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_scan_get_ap_ie_len(int *len);
|
||
|
||
/**
|
||
* @brief Get AP record
|
||
*
|
||
* @attention Different from esp_wifi_scan_get_ap_records(), this API only gets one of APs scanned each time.
|
||
* See "manual_networking" example.
|
||
*
|
||
* @param[out] ap_record pointer to one AP record
|
||
* @param[out] buffer pointer to the mesh networking IE of this AP
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_WIFI_NOT_INIT
|
||
* - ESP_ERR_WIFI_ARG
|
||
* - ESP_ERR_WIFI_FAIL
|
||
*/
|
||
esp_err_t esp_mesh_scan_get_ap_record(wifi_ap_record_t *ap_record, void *buffer);
|
||
|
||
/**
|
||
* @brief Flush upstream packets pending in to_parent queue and to_parent_p2p queue
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
*/
|
||
esp_err_t esp_mesh_flush_upstream_packets(void);
|
||
|
||
/**
|
||
* @brief Get the number of nodes in the subnet of a specific child
|
||
*
|
||
* @param[in] child_mac an associated child address of this device
|
||
* @param[out] nodes_num pointer to the number of nodes in the subnet of a specific child
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_NOT_START
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_get_subnet_nodes_num(const mesh_addr_t *child_mac, int *nodes_num);
|
||
|
||
/**
|
||
* @brief Get nodes in the subnet of a specific child
|
||
*
|
||
* @param[in] child_mac an associated child address of this device
|
||
* @param[out] nodes pointer to nodes in the subnet of a specific child
|
||
* @param[in] nodes_num the number of nodes in the subnet of a specific child
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
* - ESP_ERR_MESH_NOT_START
|
||
* - ESP_ERR_MESH_ARGUMENT
|
||
*/
|
||
esp_err_t esp_mesh_get_subnet_nodes_list(const mesh_addr_t *child_mac, mesh_addr_t *nodes, int nodes_num);
|
||
|
||
/**
|
||
* @brief Disconnect from current parent
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
*/
|
||
esp_err_t esp_mesh_disconnect(void);
|
||
|
||
/**
|
||
* @brief Connect to current parent
|
||
*
|
||
* @return
|
||
* - ESP_OK
|
||
*/
|
||
esp_err_t esp_mesh_connect(void);
|
||
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|
||
#endif /* __ESP_MESH_H__ */
|