OVMS3-idf/components/bt/Kconfig

1348 lines
52 KiB
Text

menu Bluetooth
config BT_ENABLED
bool "Bluetooth"
help
Select this option to enable Bluetooth and show the submenu with Bluetooth configuration choices.
menu "Bluetooth controller"
visible if BT_ENABLED
choice BTDM_CTRL_MODE
prompt "Bluetooth controller mode (BR/EDR/BLE/DUALMODE)"
depends on BT_ENABLED
help
Specify the bluetooth controller mode (BR/EDR, BLE or dual mode).
config BTDM_CTRL_MODE_BLE_ONLY
bool "BLE Only"
config BTDM_CTRL_MODE_BR_EDR_ONLY
bool "BR/EDR Only"
config BTDM_CTRL_MODE_BTDM
bool "Bluetooth Dual Mode"
endchoice
config BTDM_CTRL_BLE_MAX_CONN
int "BLE Max Connections"
depends on BTDM_CTRL_MODE_BLE_ONLY || BTDM_CTRL_MODE_BTDM
default 3
range 1 9
help
BLE maximum connections of bluetooth controller.
Each connection uses 1KB static DRAM whenever the BT controller is enabled.
config BTDM_CTRL_BR_EDR_MAX_ACL_CONN
int "BR/EDR ACL Max Connections"
depends on BTDM_CTRL_MODE_BR_EDR_ONLY || BTDM_CTRL_MODE_BTDM
default 2
range 1 7
help
BR/EDR ACL maximum connections of bluetooth controller.
Each connection uses 1.2KB static DRAM whenever the BT controller is enabled.
config BTDM_CTRL_BR_EDR_MAX_SYNC_CONN
int "BR/EDR Sync(SCO/eSCO) Max Connections"
depends on BTDM_CTRL_MODE_BR_EDR_ONLY || BTDM_CTRL_MODE_BTDM
default 0
range 0 3
help
BR/EDR Synchronize maximum connections of bluetooth controller.
Each connection uses 2KB static DRAM whenever the BT controller is enabled.
choice BTDM_CTRL_BR_EDR_SCO_DATA_PATH
prompt "BR/EDR Sync(SCO/eSCO) default data path"
depends on BTDM_CTRL_MODE_BR_EDR_ONLY || BTDM_CTRL_MODE_BTDM
default BTDM_CTRL_BR_EDR_SCO_DATA_PATH_PCM
help
SCO data path, i.e. HCI or PCM.
SCO data can be sent/received through HCI synchronous packets, or the data
can be routed to on-chip PCM module on ESP32. PCM input/output signals can
be "matrixed" to GPIOs. The default data path can also be set using API
"esp_bredr_sco_datapath_set"
config BTDM_CTRL_BR_EDR_SCO_DATA_PATH_HCI
bool "HCI"
config BTDM_CTRL_BR_EDR_SCO_DATA_PATH_PCM
bool "PCM"
endchoice
config BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF
int
default 0 if BTDM_CTRL_BR_EDR_SCO_DATA_PATH_HCI
default 1 if BTDM_CTRL_BR_EDR_SCO_DATA_PATH_PCM
default 0
config BTDM_CTRL_BLE_MAX_CONN_EFF
int
default BTDM_CTRL_BLE_MAX_CONN if BTDM_CTRL_MODE_BLE_ONLY || BTDM_CTRL_MODE_BTDM
default 0
config BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF
int
default BTDM_CTRL_BR_EDR_MAX_ACL_CONN if BTDM_CTRL_MODE_BR_EDR_ONLY || BTDM_CTRL_MODE_BTDM
default 0
config BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF
int
default BTDM_CTRL_BR_EDR_MAX_SYNC_CONN if BTDM_CTRL_MODE_BR_EDR_ONLY || BTDM_CTRL_MODE_BTDM
default 0
choice BTDM_CTRL_PINNED_TO_CORE_CHOICE
prompt "The cpu core which bluetooth controller run"
depends on BT_ENABLED && !FREERTOS_UNICORE
help
Specify the cpu core to run bluetooth controller.
Can not specify no-affinity.
config BTDM_CTRL_PINNED_TO_CORE_0
bool "Core 0 (PRO CPU)"
config BTDM_CTRL_PINNED_TO_CORE_1
bool "Core 1 (APP CPU)"
depends on !FREERTOS_UNICORE
endchoice
config BTDM_CTRL_PINNED_TO_CORE
int
default 0 if BTDM_CTRL_PINNED_TO_CORE_0
default 1 if BTDM_CTRL_PINNED_TO_CORE_1
default 0
choice BTDM_CTRL_HCI_MODE_CHOICE
prompt "HCI mode"
depends on BT_ENABLED
help
Speicify HCI mode as VHCI or UART(H4)
config BTDM_CTRL_HCI_MODE_VHCI
bool "VHCI"
help
Normal option. Mostly, choose this VHCI when bluetooth host run on ESP32, too.
config BTDM_CTRL_HCI_MODE_UART_H4
bool "UART(H4)"
help
If use external bluetooth host which run on other hardware and use UART as the HCI interface,
choose this option.
endchoice
menu "HCI UART(H4) Options"
visible if BTDM_CTRL_HCI_MODE_UART_H4
config BT_HCI_UART_NO
int "UART Number for HCI"
depends on BTDM_CTRL_HCI_MODE_UART_H4
range 1 2
default 1
help
Uart number for HCI. The available uart is UART1 and UART2.
config BT_HCI_UART_BAUDRATE
int "UART Baudrate for HCI"
depends on BTDM_CTRL_HCI_MODE_UART_H4
range 115200 921600
default 921600
help
UART Baudrate for HCI. Please use standard baudrate.
endmenu
menu "MODEM SLEEP Options"
visible if BT_ENABLED
config BTDM_MODEM_SLEEP
bool "Bluetooth modem sleep"
depends on BT_ENABLED
default y
help
Enable/disable bluetooth controller low power mode.
choice BTDM_MODEM_SLEEP_MODE
prompt "Bluetooth Modem sleep mode"
depends on BTDM_MODEM_SLEEP
help
To select which strategy to use for modem sleep
config BTDM_MODEM_SLEEP_MODE_ORIG
bool "ORIG Mode(sleep with low power clock)"
help
ORIG mode is a bluetooth sleep mode that can be used for dual mode controller. In this mode,
bluetooth controller sleeps between BR/EDR frames and BLE events. A low power clock is used to
maintain bluetooth reference clock.
config BTDM_MODEM_SLEEP_MODE_EVED
bool "EVED Mode(For internal test only)"
help
EVED mode is for BLE only and is only for internal test. Do not use it for production. this
mode is not compatible with DFS nor light sleep
endchoice
choice BTDM_LOW_POWER_CLOCK
prompt "Bluetooth low power clock"
depends on BTDM_MODEM_SLEEP_MODE_ORIG
help
Select the low power clock source for bluetooth controller. Bluetooth low power clock is
the clock source to maintain time in sleep mode.
- "Main crystal" option provides good accuracy and can support Dynamic Frequency Scaling
to be used with Bluetooth modem sleep. Light sleep is not supported.
- "External 32kHz crystal" option allows user to use a 32.768kHz crystal as Bluetooth low
power clock. This option is allowed as long as External 32kHz crystal is configured as
the system RTC clock source. This option provides good accuracy and supports Bluetooth
modem sleep to be used alongside Dynamic Frequency Scaling or light sleep.
config BTDM_LPCLK_SEL_MAIN_XTAL
bool "Main crystal"
help
Main crystal can be used as low power clock for bluetooth modem sleep. If this option is
selected, bluetooth modem sleep can work under Dynamic Frequency Scaling(DFS) enabled, but
cannot work when light sleep is enabled. Main crystal has a good performance in accuracy as
the bluetooth low power clock source.
config BTDM_LPCLK_SEL_EXT_32K_XTAL
bool "External 32kHz crystal"
depends on ESP32_RTC_CLK_SRC_EXT_CRYS
help
External 32kHz crystal has a nominal frequency of 32.768kHz and provides good frequency
stability. If used as Bluetooth low power clock, External 32kHz can support Bluetooth
modem sleep to be used with both DFS and light sleep.
endchoice
endmenu
choice BTDM_BLE_SLEEP_CLOCK_ACCURACY
prompt "BLE Sleep Clock Accuracy"
depends on BTDM_CTRL_MODE_BLE_ONLY || BTDM_CTRL_MODE_BTDM
default BTDM_BLE_DEFAULT_SCA_250PPM
help
BLE Sleep Clock Accuracy(SCA) for the local device is used to estimate window widening in BLE
connection events. With a lower level of clock accuracy(e.g. 500ppm over 250ppm), the slave
needs a larger RX window to synchronize with master in each anchor point, thus resulting in an
increase of power consumption but a higher level of robustness in keeping connected. According
to the requirements of Bluetooth Core specification 4.2, the worst-case accuracy of Classic
Bluetooth low power oscialltor(LPO) is +/-250ppm in STANDBY and in low power modes such as
sniff. For BLE the worst-case SCA is +/-500ppm.
- "151ppm to 250ppm" option is the default value for Bluetooth Dual mode
- "251ppm to 500ppm" option can be used in BLE only mode when using external 32kHz crystal as
low power clock. This option is provided in case that BLE sleep clock has a lower level of
accuracy, or other error sources contribute to the inaccurate timing during sleep.
config BTDM_BLE_DEFAULT_SCA_500PPM
bool "251ppm to 500ppm"
depends on BTDM_LPCLK_SEL_EXT_32K_XTAL && BTDM_CTRL_MODE_BLE_ONLY
config BTDM_BLE_DEFAULT_SCA_250PPM
bool "151ppm to 250ppm"
endchoice
config BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF
int
default 0 if BTDM_BLE_DEFAULT_SCA_500PPM
default 1 if BTDM_BLE_DEFAULT_SCA_250PPM
default 1
config BTDM_BLE_SCAN_DUPL
bool "BLE Scan Duplicate Options"
depends on (BTDM_CTRL_MODE_BTDM || BTDM_CTRL_MODE_BLE_ONLY)
default y
help
This select enables parameters setting of BLE scan duplicate.
choice BTDM_SCAN_DUPL_TYPE
prompt "Scan Duplicate Type"
default BTDM_SCAN_DUPL_TYPE_DEVICE
depends on BTDM_BLE_SCAN_DUPL
help
Scan duplicate have three ways. one is "Scan Duplicate By Device Address", This way is to use
advertiser address filtering. The adv packet of the same address is only allowed to be reported once.
Another way is "Scan Duplicate By Device Address And Advertising Data". This way is to use advertising
data and device address filtering. All different adv packets with the same address are allowed to be
reported. The last way is "Scan Duplicate By Advertising Data". This way is to use advertising data
filtering. All same advertising data only allow to be reported once even though they are from
different devices.
config BTDM_SCAN_DUPL_TYPE_DEVICE
bool "Scan Duplicate By Device Address"
help
This way is to use advertiser address filtering. The adv packet of the same address is only
allowed to be reported once
config BTDM_SCAN_DUPL_TYPE_DATA
bool "Scan Duplicate By Advertising Data"
help
This way is to use advertising data filtering. All same advertising data only allow to be reported
once even though they are from different devices.
config BTDM_SCAN_DUPL_TYPE_DATA_DEVICE
bool "Scan Duplicate By Device Address And Advertising Data"
help
This way is to use advertising data and device address filtering. All different adv packets with
the same address are allowed to be reported.
endchoice
config BTDM_SCAN_DUPL_TYPE
int
depends on BTDM_BLE_SCAN_DUPL
default 0 if BTDM_SCAN_DUPL_TYPE_DEVICE
default 1 if BTDM_SCAN_DUPL_TYPE_DATA
default 2 if BTDM_SCAN_DUPL_TYPE_DATA_DEVICE
default 0
config BTDM_SCAN_DUPL_CACHE_SIZE
int "Maximum number of devices in scan duplicate filter"
depends on BTDM_BLE_SCAN_DUPL
range 10 1000
default 200
help
Maximum number of devices which can be recorded in scan duplicate filter.
When the maximum amount of device in the filter is reached, the cache will be refreshed.
config BTDM_BLE_MESH_SCAN_DUPL_EN
bool "Special duplicate scan mechanism for BLE Mesh scan"
depends on BTDM_BLE_SCAN_DUPL
default n
help
This enables the BLE scan duplicate for special BLE Mesh scan.
config BTDM_MESH_DUPL_SCAN_CACHE_SIZE
int "Maximum number of Mesh adv packets in scan duplicate filter"
depends on BTDM_BLE_MESH_SCAN_DUPL_EN
range 10 1000
default 200
help
Maximum number of adv packets which can be recorded in duplicate scan cache for BLE Mesh.
When the maximum amount of device in the filter is reached, the cache will be refreshed.
config BTDM_CTRL_FULL_SCAN_SUPPORTED
bool "BLE full scan feature supported"
depends on BTDM_CTRL_MODE_BLE_ONLY
default n
help
The full scan function is mainly used to provide BLE scan performance.
This is required for scenes with high scan performance requirements, such as BLE Mesh scenes.
config BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP
bool "BLE adv report flow control supported"
depends on (BTDM_CTRL_MODE_BTDM || BTDM_CTRL_MODE_BLE_ONLY)
default y
help
The function is mainly used to enable flow control for advertising reports. When it is enabled,
advertising reports will be discarded by the controller if the number of unprocessed advertising
reports exceeds the size of BLE adv report flow control.
config BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM
int "BLE adv report flow control number"
depends on BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP
range 50 1000
default 100
help
The number of unprocessed advertising report that Bluedroid can save.If you set
`BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM` to a small value, this may cause adv packets lost.
If you set `BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM` to a large value, Bluedroid may cache a
lot of adv packets and this may cause system memory run out. For example, if you set
it to 50, the maximum memory consumed by host is 35 * 50 bytes. Please set
`BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM` according to your system free memory and handle adv
packets as fast as possible, otherwise it will cause adv packets lost.
config BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD
int "BLE adv lost event threshold value"
depends on BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP
range 1 1000
default 20
help
When adv report flow control is enabled, The ADV lost event will be generated when the number
of ADV packets lost in the controller reaches this threshold. It is better to set a larger value.
If you set `BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD` to a small value or printf every adv lost event, it
may cause adv packets lost more.
endmenu
menuconfig BT_BLUEDROID_ENABLED
bool "Bluedroid Enable"
depends on BTDM_CTRL_HCI_MODE_VHCI
default y
help
This enables the default Bluedroid Bluetooth stack
choice BT_BLUEDROID_PINNED_TO_CORE_CHOICE
prompt "The cpu core which Bluedroid run"
depends on BT_BLUEDROID_ENABLED && !FREERTOS_UNICORE
help
Which the cpu core to run Bluedroid. Can choose core0 and core1.
Can not specify no-affinity.
config BT_BLUEDROID_PINNED_TO_CORE_0
bool "Core 0 (PRO CPU)"
config BT_BLUEDROID_PINNED_TO_CORE_1
bool "Core 1 (APP CPU)"
depends on !FREERTOS_UNICORE
endchoice
config BT_BLUEDROID_PINNED_TO_CORE
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_BLUEDROID_PINNED_TO_CORE_0
default 1 if BT_BLUEDROID_PINNED_TO_CORE_1
default 0
config BT_BTC_TASK_STACK_SIZE
int "Bluetooth event (callback to application) task stack size"
depends on BT_BLUEDROID_ENABLED
default 3072
help
This select btc task stack size
config BT_BTU_TASK_STACK_SIZE
int "Bluetooth Bluedroid Host Stack task stack size"
depends on BT_BLUEDROID_ENABLED
default 4096
help
This select btu task stack size
config BT_BLUEDROID_MEM_DEBUG
bool "Bluedroid memory debug"
depends on BT_BLUEDROID_ENABLED
default n
help
Bluedroid memory debug
config BT_CLASSIC_ENABLED
bool "Classic Bluetooth"
depends on BT_BLUEDROID_ENABLED
default n
help
For now this option needs "SMP_ENABLE" to be set to yes
config BT_A2DP_ENABLE
bool "A2DP"
depends on BT_CLASSIC_ENABLED
default n
help
Advanced Audio Distrubution Profile
config BT_A2DP_SINK_TASK_STACK_SIZE
int "A2DP sink (audio stream decoding) task stack size"
depends on BT_A2DP_ENABLE
default 2048
config BT_A2DP_SOURCE_TASK_STACK_SIZE
int "A2DP source (audio stream encoding) task stack size"
depends on BT_A2DP_ENABLE
default 2048
config BT_SPP_ENABLED
bool "SPP"
depends on BT_CLASSIC_ENABLED
default n
help
This enables the Serial Port Profile
config BT_HFP_ENABLE
bool "Hands Free/Handset Profile"
depends on BT_CLASSIC_ENABLED
default n
choice BT_HFP_ROLE
prompt "Hands-free Profile Role configuration"
depends on BT_HFP_ENABLE
config BT_HFP_CLIENT_ENABLE
bool "Hands Free Unit"
endchoice
choice BT_HFP_AUDIO_DATA_PATH
prompt "audio(SCO) data path"
depends on BT_HFP_ENABLE
help
SCO data path, i.e. HCI or PCM. This option is set using API
"esp_bredr_sco_datapath_set" in Bluetooth host. Default SCO data
path can also be set in Bluetooth Controller.
config BT_HFP_AUDIO_DATA_PATH_PCM
bool "PCM"
config BT_HFP_AUDIO_DATA_PATH_HCI
bool "HCI"
endchoice
config BT_SSP_ENABLED
bool "Secure Simple Pairing"
depends on BT_CLASSIC_ENABLED
default y
help
This enables the Secure Simple Pairing. If disable this option, Bluedroid will only support Legacy Pairing
config BT_GATTS_ENABLE
bool "Include GATT server module(GATTS)"
depends on BT_BLUEDROID_ENABLED && (BTDM_CTRL_MODE_BTDM || BTDM_CTRL_MODE_BLE_ONLY)
default y
help
This option can be disabled when the app work only on gatt client mode
choice BT_GATTS_SEND_SERVICE_CHANGE_MODE
prompt "GATTS Service Change Mode"
default BT_GATTS_SEND_SERVICE_CHANGE_AUTO
depends on BT_GATTS_ENABLE
help
Service change indication mode for GATT Server.
config BT_GATTS_SEND_SERVICE_CHANGE_MANUAL
bool "GATTS manually send service change indication"
help
Manually send service change indication through API esp_ble_gatts_send_service_change_indication()
config BT_GATTS_SEND_SERVICE_CHANGE_AUTO
bool "GATTS automatically send service change indication"
help
Let Bluedroid handle the service change indication internally
endchoice
config BT_GATTS_SEND_SERVICE_CHANGE_MODE
int
depends on BT_GATTS_ENABLE
default 0 if BT_GATTS_SEND_SERVICE_CHANGE_AUTO
default 1 if BT_GATTS_SEND_SERVICE_CHANGE_MANUAL
default 0
config BT_GATTC_ENABLE
bool "Include GATT client module(GATTC)"
depends on BT_BLUEDROID_ENABLED && (BTDM_CTRL_MODE_BTDM || BTDM_CTRL_MODE_BLE_ONLY)
default y
help
This option can be close when the app work only on gatt server mode
config BT_GATTC_CACHE_NVS_FLASH
bool "Save gattc cache data to nvs flash"
depends on BT_GATTC_ENABLE && (BTDM_CTRL_MODE_BTDM || BTDM_CTRL_MODE_BLE_ONLY)
default n
help
This select can save gattc cache data to nvs flash
config BT_BLE_SMP_ENABLE
bool "Include BLE security module(SMP)"
depends on BT_BLUEDROID_ENABLED && (BTDM_CTRL_MODE_BTDM || BTDM_CTRL_MODE_BLE_ONLY)
default y
help
This option can be close when the app not used the ble security connect.
config BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE
bool "Slave enable connection parameters update during pairing"
depends on BT_BLE_SMP_ENABLE
default n
help
In order to reduce the pairing time, slave actively initiates connection parameters update during pairing.
config BT_STACK_NO_LOG
bool "Disable BT debug logs (minimize bin size)"
depends on BT_BLUEDROID_ENABLED
default n
help
This select can save the rodata code size
menu "BT DEBUG LOG LEVEL"
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
choice BT_LOG_HCI_TRACE_LEVEL
prompt "HCI layer"
default BT_LOG_HCI_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for HCI layer
config BT_LOG_HCI_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_HCI_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_HCI_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_HCI_TRACE_LEVEL_API
bool "API"
config BT_LOG_HCI_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_HCI_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_HCI_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_HCI_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_HCI_TRACE_LEVEL_NONE
default 1 if BT_LOG_HCI_TRACE_LEVEL_ERROR
default 2 if BT_LOG_HCI_TRACE_LEVEL_WARNING
default 3 if BT_LOG_HCI_TRACE_LEVEL_API
default 4 if BT_LOG_HCI_TRACE_LEVEL_EVENT
default 5 if BT_LOG_HCI_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_HCI_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_BTM_TRACE_LEVEL
prompt "BTM layer"
default BT_LOG_BTM_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for BTM layer
config BT_LOG_BTM_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_BTM_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_BTM_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_BTM_TRACE_LEVEL_API
bool "API"
config BT_LOG_BTM_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_BTM_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_BTM_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_BTM_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_BTM_TRACE_LEVEL_NONE
default 1 if BT_LOG_BTM_TRACE_LEVEL_ERROR
default 2 if BT_LOG_BTM_TRACE_LEVEL_WARNING
default 3 if BT_LOG_BTM_TRACE_LEVEL_API
default 4 if BT_LOG_BTM_TRACE_LEVEL_EVENT
default 5 if BT_LOG_BTM_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_BTM_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_L2CAP_TRACE_LEVEL
prompt "L2CAP layer"
default BT_LOG_L2CAP_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for L2CAP layer
config BT_LOG_L2CAP_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_L2CAP_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_L2CAP_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_L2CAP_TRACE_LEVEL_API
bool "API"
config BT_LOG_L2CAP_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_L2CAP_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_L2CAP_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_L2CAP_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_L2CAP_TRACE_LEVEL_NONE
default 1 if BT_LOG_L2CAP_TRACE_LEVEL_ERROR
default 2 if BT_LOG_L2CAP_TRACE_LEVEL_WARNING
default 3 if BT_LOG_L2CAP_TRACE_LEVEL_API
default 4 if BT_LOG_L2CAP_TRACE_LEVEL_EVENT
default 5 if BT_LOG_L2CAP_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_L2CAP_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_RFCOMM_TRACE_LEVEL
prompt "RFCOMM layer"
default BT_LOG_RFCOMM_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for RFCOMM layer
config BT_LOG_RFCOMM_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_RFCOMM_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_RFCOMM_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_RFCOMM_TRACE_LEVEL_API
bool "API"
config BT_LOG_RFCOMM_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_RFCOMM_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_RFCOMM_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_RFCOMM_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_RFCOMM_TRACE_LEVEL_NONE
default 1 if BT_LOG_RFCOMM_TRACE_LEVEL_ERROR
default 2 if BT_LOG_RFCOMM_TRACE_LEVEL_WARNING
default 3 if BT_LOG_RFCOMM_TRACE_LEVEL_API
default 4 if BT_LOG_RFCOMM_TRACE_LEVEL_EVENT
default 5 if BT_LOG_RFCOMM_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_RFCOMM_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_SDP_TRACE_LEVEL
prompt "SDP layer"
default BT_LOG_SDP_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for SDP layer
config BT_LOG_SDP_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_SDP_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_SDP_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_SDP_TRACE_LEVEL_API
bool "API"
config BT_LOG_SDP_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_SDP_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_SDP_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_SDP_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_SDP_TRACE_LEVEL_NONE
default 1 if BT_LOG_SDP_TRACE_LEVEL_ERROR
default 2 if BT_LOG_SDP_TRACE_LEVEL_WARNING
default 3 if BT_LOG_SDP_TRACE_LEVEL_API
default 4 if BT_LOG_SDP_TRACE_LEVEL_EVENT
default 5 if BT_LOG_SDP_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_SDP_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_GAP_TRACE_LEVEL
prompt "GAP layer"
default BT_LOG_GAP_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for GAP layer
config BT_LOG_GAP_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_GAP_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_GAP_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_GAP_TRACE_LEVEL_API
bool "API"
config BT_LOG_GAP_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_GAP_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_GAP_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_GAP_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_GAP_TRACE_LEVEL_NONE
default 1 if BT_LOG_GAP_TRACE_LEVEL_ERROR
default 2 if BT_LOG_GAP_TRACE_LEVEL_WARNING
default 3 if BT_LOG_GAP_TRACE_LEVEL_API
default 4 if BT_LOG_GAP_TRACE_LEVEL_EVENT
default 5 if BT_LOG_GAP_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_GAP_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_BNEP_TRACE_LEVEL
prompt "BNEP layer"
default BT_LOG_BNEP_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for BNEP layer
config BT_LOG_BNEP_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_BNEP_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_BNEP_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_BNEP_TRACE_LEVEL_API
bool "API"
config BT_LOG_BNEP_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_BNEP_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_BNEP_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_BNEP_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_BNEP_TRACE_LEVEL_NONE
default 1 if BT_LOG_BNEP_TRACE_LEVEL_ERROR
default 2 if BT_LOG_BNEP_TRACE_LEVEL_WARNING
default 3 if BT_LOG_BNEP_TRACE_LEVEL_API
default 4 if BT_LOG_BNEP_TRACE_LEVEL_EVENT
default 5 if BT_LOG_BNEP_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_BNEP_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_PAN_TRACE_LEVEL
prompt "PAN layer"
default BT_LOG_PAN_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for PAN layer
config BT_LOG_PAN_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_PAN_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_PAN_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_PAN_TRACE_LEVEL_API
bool "API"
config BT_LOG_PAN_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_PAN_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_PAN_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_PAN_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_PAN_TRACE_LEVEL_NONE
default 1 if BT_LOG_PAN_TRACE_LEVEL_ERROR
default 2 if BT_LOG_PAN_TRACE_LEVEL_WARNING
default 3 if BT_LOG_PAN_TRACE_LEVEL_API
default 4 if BT_LOG_PAN_TRACE_LEVEL_EVENT
default 5 if BT_LOG_PAN_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_PAN_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_A2D_TRACE_LEVEL
prompt "A2D layer"
default BT_LOG_A2D_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for A2D layer
config BT_LOG_A2D_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_A2D_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_A2D_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_A2D_TRACE_LEVEL_API
bool "API"
config BT_LOG_A2D_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_A2D_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_A2D_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_A2D_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_A2D_TRACE_LEVEL_NONE
default 1 if BT_LOG_A2D_TRACE_LEVEL_ERROR
default 2 if BT_LOG_A2D_TRACE_LEVEL_WARNING
default 3 if BT_LOG_A2D_TRACE_LEVEL_API
default 4 if BT_LOG_A2D_TRACE_LEVEL_EVENT
default 5 if BT_LOG_A2D_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_A2D_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_AVDT_TRACE_LEVEL
prompt "AVDT layer"
default BT_LOG_AVDT_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for AVDT layer
config BT_LOG_AVDT_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_AVDT_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_AVDT_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_AVDT_TRACE_LEVEL_API
bool "API"
config BT_LOG_AVDT_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_AVDT_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_AVDT_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_AVDT_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_AVDT_TRACE_LEVEL_NONE
default 1 if BT_LOG_AVDT_TRACE_LEVEL_ERROR
default 2 if BT_LOG_AVDT_TRACE_LEVEL_WARNING
default 3 if BT_LOG_AVDT_TRACE_LEVEL_API
default 4 if BT_LOG_AVDT_TRACE_LEVEL_EVENT
default 5 if BT_LOG_AVDT_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_AVDT_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_AVCT_TRACE_LEVEL
prompt "AVCT layer"
default BT_LOG_AVCT_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for AVCT layer
config BT_LOG_AVCT_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_AVCT_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_AVCT_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_AVCT_TRACE_LEVEL_API
bool "API"
config BT_LOG_AVCT_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_AVCT_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_AVCT_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_AVCT_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_AVCT_TRACE_LEVEL_NONE
default 1 if BT_LOG_AVCT_TRACE_LEVEL_ERROR
default 2 if BT_LOG_AVCT_TRACE_LEVEL_WARNING
default 3 if BT_LOG_AVCT_TRACE_LEVEL_API
default 4 if BT_LOG_AVCT_TRACE_LEVEL_EVENT
default 5 if BT_LOG_AVCT_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_AVCT_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_AVRC_TRACE_LEVEL
prompt "AVRC layer"
default BT_LOG_AVRC_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for AVRC layer
config BT_LOG_AVRC_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_AVRC_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_AVRC_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_AVRC_TRACE_LEVEL_API
bool "API"
config BT_LOG_AVRC_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_AVRC_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_AVRC_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_AVRC_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_AVRC_TRACE_LEVEL_NONE
default 1 if BT_LOG_AVRC_TRACE_LEVEL_ERROR
default 2 if BT_LOG_AVRC_TRACE_LEVEL_WARNING
default 3 if BT_LOG_AVRC_TRACE_LEVEL_API
default 4 if BT_LOG_AVRC_TRACE_LEVEL_EVENT
default 5 if BT_LOG_AVRC_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_AVRC_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_MCA_TRACE_LEVEL
prompt "MCA layer"
default BT_LOG_MCA_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for MCA layer
config BT_LOG_MCA_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_MCA_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_MCA_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_MCA_TRACE_LEVEL_API
bool "API"
config BT_LOG_MCA_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_MCA_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_MCA_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_MCA_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_MCA_TRACE_LEVEL_NONE
default 1 if BT_LOG_MCA_TRACE_LEVEL_ERROR
default 2 if BT_LOG_MCA_TRACE_LEVEL_WARNING
default 3 if BT_LOG_MCA_TRACE_LEVEL_API
default 4 if BT_LOG_MCA_TRACE_LEVEL_EVENT
default 5 if BT_LOG_MCA_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_MCA_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_HID_TRACE_LEVEL
prompt "HID layer"
default BT_LOG_HID_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for HID layer
config BT_LOG_HID_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_HID_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_HID_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_HID_TRACE_LEVEL_API
bool "API"
config BT_LOG_HID_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_HID_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_HID_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_HID_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_HID_TRACE_LEVEL_NONE
default 1 if BT_LOG_HID_TRACE_LEVEL_ERROR
default 2 if BT_LOG_HID_TRACE_LEVEL_WARNING
default 3 if BT_LOG_HID_TRACE_LEVEL_API
default 4 if BT_LOG_HID_TRACE_LEVEL_EVENT
default 5 if BT_LOG_HID_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_HID_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_APPL_TRACE_LEVEL
prompt "APPL layer"
default BT_LOG_APPL_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for APPL layer
config BT_LOG_APPL_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_APPL_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_APPL_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_APPL_TRACE_LEVEL_API
bool "API"
config BT_LOG_APPL_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_APPL_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_APPL_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_APPL_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_APPL_TRACE_LEVEL_NONE
default 1 if BT_LOG_APPL_TRACE_LEVEL_ERROR
default 2 if BT_LOG_APPL_TRACE_LEVEL_WARNING
default 3 if BT_LOG_APPL_TRACE_LEVEL_API
default 4 if BT_LOG_APPL_TRACE_LEVEL_EVENT
default 5 if BT_LOG_APPL_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_APPL_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_GATT_TRACE_LEVEL
prompt "GATT layer"
default BT_LOG_GATT_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for GATT layer
config BT_LOG_GATT_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_GATT_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_GATT_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_GATT_TRACE_LEVEL_API
bool "API"
config BT_LOG_GATT_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_GATT_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_GATT_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_GATT_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_GATT_TRACE_LEVEL_NONE
default 1 if BT_LOG_GATT_TRACE_LEVEL_ERROR
default 2 if BT_LOG_GATT_TRACE_LEVEL_WARNING
default 3 if BT_LOG_GATT_TRACE_LEVEL_API
default 4 if BT_LOG_GATT_TRACE_LEVEL_EVENT
default 5 if BT_LOG_GATT_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_GATT_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_SMP_TRACE_LEVEL
prompt "SMP layer"
default BT_LOG_SMP_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for SMP layer
config BT_LOG_SMP_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_SMP_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_SMP_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_SMP_TRACE_LEVEL_API
bool "API"
config BT_LOG_SMP_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_SMP_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_SMP_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_SMP_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_SMP_TRACE_LEVEL_NONE
default 1 if BT_LOG_SMP_TRACE_LEVEL_ERROR
default 2 if BT_LOG_SMP_TRACE_LEVEL_WARNING
default 3 if BT_LOG_SMP_TRACE_LEVEL_API
default 4 if BT_LOG_SMP_TRACE_LEVEL_EVENT
default 5 if BT_LOG_SMP_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_SMP_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_BTIF_TRACE_LEVEL
prompt "BTIF layer"
default BT_LOG_BTIF_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for BTIF layer
config BT_LOG_BTIF_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_BTIF_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_BTIF_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_BTIF_TRACE_LEVEL_API
bool "API"
config BT_LOG_BTIF_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_BTIF_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_BTIF_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_BTIF_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_BTIF_TRACE_LEVEL_NONE
default 1 if BT_LOG_BTIF_TRACE_LEVEL_ERROR
default 2 if BT_LOG_BTIF_TRACE_LEVEL_WARNING
default 3 if BT_LOG_BTIF_TRACE_LEVEL_API
default 4 if BT_LOG_BTIF_TRACE_LEVEL_EVENT
default 5 if BT_LOG_BTIF_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_BTIF_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_BTC_TRACE_LEVEL
prompt "BTC layer"
default BT_LOG_BTC_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for BTC layer
config BT_LOG_BTC_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_BTC_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_BTC_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_BTC_TRACE_LEVEL_API
bool "API"
config BT_LOG_BTC_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_BTC_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_BTC_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_BTC_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_BTC_TRACE_LEVEL_NONE
default 1 if BT_LOG_BTC_TRACE_LEVEL_ERROR
default 2 if BT_LOG_BTC_TRACE_LEVEL_WARNING
default 3 if BT_LOG_BTC_TRACE_LEVEL_API
default 4 if BT_LOG_BTC_TRACE_LEVEL_EVENT
default 5 if BT_LOG_BTC_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_BTC_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_OSI_TRACE_LEVEL
prompt "OSI layer"
default BT_LOG_OSI_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for OSI layer
config BT_LOG_OSI_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_OSI_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_OSI_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_OSI_TRACE_LEVEL_API
bool "API"
config BT_LOG_OSI_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_OSI_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_OSI_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_OSI_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_OSI_TRACE_LEVEL_NONE
default 1 if BT_LOG_OSI_TRACE_LEVEL_ERROR
default 2 if BT_LOG_OSI_TRACE_LEVEL_WARNING
default 3 if BT_LOG_OSI_TRACE_LEVEL_API
default 4 if BT_LOG_OSI_TRACE_LEVEL_EVENT
default 5 if BT_LOG_OSI_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_OSI_TRACE_LEVEL_VERBOSE
default 2
choice BT_LOG_BLUFI_TRACE_LEVEL
prompt "BLUFI layer"
default BT_LOG_BLUFI_TRACE_LEVEL_WARNING
depends on BT_BLUEDROID_ENABLED && !BT_STACK_NO_LOG
help
Define BT trace level for BLUFI layer
config BT_LOG_BLUFI_TRACE_LEVEL_NONE
bool "NONE"
config BT_LOG_BLUFI_TRACE_LEVEL_ERROR
bool "ERROR"
config BT_LOG_BLUFI_TRACE_LEVEL_WARNING
bool "WARNING"
config BT_LOG_BLUFI_TRACE_LEVEL_API
bool "API"
config BT_LOG_BLUFI_TRACE_LEVEL_EVENT
bool "EVENT"
config BT_LOG_BLUFI_TRACE_LEVEL_DEBUG
bool "DEBUG"
config BT_LOG_BLUFI_TRACE_LEVEL_VERBOSE
bool "VERBOSE"
endchoice
config BT_LOG_BLUFI_TRACE_LEVEL
int
depends on BT_BLUEDROID_ENABLED
default 0 if BT_LOG_BLUFI_TRACE_LEVEL_NONE
default 1 if BT_LOG_BLUFI_TRACE_LEVEL_ERROR
default 2 if BT_LOG_BLUFI_TRACE_LEVEL_WARNING
default 3 if BT_LOG_BLUFI_TRACE_LEVEL_API
default 4 if BT_LOG_BLUFI_TRACE_LEVEL_EVENT
default 5 if BT_LOG_BLUFI_TRACE_LEVEL_DEBUG
default 6 if BT_LOG_BLUFI_TRACE_LEVEL_VERBOSE
default 2
endmenu #BT DEBUG LOG LEVEL
config BT_ACL_CONNECTIONS
int "BT/BLE MAX ACL CONNECTIONS(1~7)"
depends on BT_BLUEDROID_ENABLED
range 1 7
default 4
help
Maximum BT/BLE connection count
config BT_ALLOCATION_FROM_SPIRAM_FIRST
bool "BT/BLE will first malloc the memory from the PSRAM"
depends on BT_BLUEDROID_ENABLED
default n
help
This select can save the internal RAM if there have the PSRAM
config BT_BLE_DYNAMIC_ENV_MEMORY
bool "Use dynamic memory allocation in BT/BLE stack"
depends on BT_BLUEDROID_ENABLED
default n
help
This select can make the allocation of memory will become more flexible
config BT_BLE_HOST_QUEUE_CONG_CHECK
bool "BLE queue congestion check"
depends on BT_BLUEDROID_ENABLED
default n
help
When scanning and scan duplicate is not enabled, if there are a lot of adv packets around or application
layer handling adv packets is slow, it will cause the controller memory to run out. if enabled, adv
packets will be lost when host queue is congested.
config BT_SMP_ENABLE
bool
depends on BT_BLUEDROID_ENABLED
default BT_CLASSIC_ENABLED || BT_BLE_SMP_ENABLE
config BT_BLE_ACT_SCAN_REP_ADV_SCAN
bool "Report adv data and scan response individually when BLE active scan"
depends on BT_BLUEDROID_ENABLED && (BTDM_CTRL_MODE_BTDM || BTDM_CTRL_MODE_BLE_ONLY)
default n
help
Originally, when doing BLE active scan, Bluedroid will not report adv to application layer
until receive scan response. This option is used to disable the behavior. When enable this option,
Bluedroid will report adv data or scan response to application layer immediately.
# Memory reserved at start of DRAM for Bluetooth stack
config BT_BLE_ESTAB_LINK_CONN_TOUT
int "Timeout of BLE connection establishment"
depends on BT_BLUEDROID_ENABLED
range 1 60
default 30
help
Bluetooth Connection establishment maximum time, if connection time exceeds this value, the connection
establishment fails, ESP_GATTC_OPEN_EVT or ESP_GATTS_OPEN_EVT is triggered.
config BT_RESERVE_DRAM
hex
default 0xdb5c if BT_ENABLED
default 0
endmenu