History

baohongde 569b9d592e component/bt: remove some error logs which are not error		2018-03-05 19:22:21 +08:00
..
main	component/bt: remove some error logs which are not error	2018-03-05 19:22:21 +08:00
Makefile	component/bt: implement classic Bluetooth profiles A2DP(sink) and AVRCP(controller)	2017-04-12 16:42:14 +08:00
README.md	component/bt: fix README.md format and loggings for A2DP sink example	2018-01-22 10:24:22 +08:00
sdkconfig.defaults	component/bt: implement A2DP source	2018-01-09 20:20:52 +08:00

README.md

ESP-IDF A2DP-SINK demo

Demo of A2DP audio sink role

This is the demo of API implementing Advanced Audio Distribution Profile to receive an audio stream.

For the I2S codec, pick whatever chip or board works for you; this code was written using a PCM5102 chip, but other I2S boards and chips will probably work as well. The default I2S connections are shown below, but these can be changed in menuconfig:

ESP pin	I2S signal
GPIO22	LRCK
GPIO25	DATA
GPIO26	BCK

If the internal DAC is selected, analog audio will be available on GPIO25 and GPIO26. The output resolution on these pins will always be limited to 8 bit because of the internal structure of the DACs.

After the program is started, other bluetooth devices such as smart phones can discover a device named "ESP_SPEAKER". Once a connection is established, audio data can be transmitted. This will be visible in the application log including a count of audio data packets.