This commit updates the watchdog timers (MWDT and RWDT) in the following ways: - Add seprate LL for MWDT and RWDT. - Add a combined WDT HAL for all Watchdog Timers - Update int_wdt.c and task_wdt.c to use WDT HAL - Remove most dependencies on LL or direct register access in other components. They will now use the WDT HAL - Update use of watchdogs (including RTC WDT) in bootloader and startup code to use the HAL layer.
544 lines
No EOL
18 KiB
C
544 lines
No EOL
18 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#include <stdlib.h>
|
|
|
|
#include "freertos/xtensa_context.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
|
|
#include "esp_spi_flash.h"
|
|
|
|
#include "esp_private/panic_reason.h"
|
|
#include "esp_private/system_internal.h"
|
|
#include "esp_debug_helpers.h"
|
|
|
|
#include "soc/soc_memory_layout.h"
|
|
#include "soc/cpu.h"
|
|
#include "soc/soc_caps.h"
|
|
#include "soc/rtc.h"
|
|
|
|
#include "hal/soc_hal.h"
|
|
#include "hal/cpu_hal.h"
|
|
#include "hal/wdt_types.h"
|
|
#include "hal/wdt_hal.h"
|
|
|
|
|
|
#include "sdkconfig.h"
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#include "esp32/cache_err_int.h"
|
|
#include "esp32/dport_access.h"
|
|
#include "esp32/rom/uart.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32S2
|
|
#include "esp32s2/cache_err_int.h"
|
|
#include "esp32s2/rom/uart.h"
|
|
#include "soc/extmem_reg.h"
|
|
#include "soc/cache_memory.h"
|
|
#include "soc/rtc_cntl_reg.h"
|
|
#endif
|
|
|
|
#include "panic_internal.h"
|
|
|
|
extern void esp_panic_handler(panic_info_t*);
|
|
|
|
static wdt_hal_context_t wdt0_context = {.inst = WDT_MWDT0, .mwdt_dev = &TIMERG0};
|
|
|
|
static XtExcFrame* xt_exc_frames[SOC_CPU_CORES_NUM] = {NULL};
|
|
|
|
/*
|
|
Panic handlers; these get called when an unhandled exception occurs or the assembly-level
|
|
task switching / interrupt code runs into an unrecoverable error. The default task stack
|
|
overflow handler and abort handler are also in here.
|
|
*/
|
|
|
|
/*
|
|
Note: The linker script will put everything in this file in IRAM/DRAM, so it also works with flash cache disabled.
|
|
*/
|
|
static void print_illegal_instruction_details(const void* f)
|
|
{
|
|
XtExcFrame* frame = (XtExcFrame*) f;
|
|
/* Print out memory around the instruction word */
|
|
uint32_t epc = frame->pc;
|
|
epc = (epc & ~0x3) - 4;
|
|
|
|
/* check that the address was sane */
|
|
if (epc < SOC_IROM_MASK_LOW || epc >= SOC_IROM_HIGH) {
|
|
return;
|
|
}
|
|
volatile uint32_t* pepc = (uint32_t*)epc;
|
|
|
|
panic_print_str("Memory dump at 0x");
|
|
panic_print_hex(epc);
|
|
panic_print_str(": ");
|
|
|
|
panic_print_hex(*pepc);
|
|
panic_print_str(" ");
|
|
panic_print_hex(*(pepc + 1));
|
|
panic_print_str(" ");
|
|
panic_print_hex(*(pepc + 2));
|
|
}
|
|
|
|
static void print_debug_exception_details(const void* f)
|
|
{
|
|
int debug_rsn;
|
|
asm("rsr.debugcause %0":"=r"(debug_rsn));
|
|
panic_print_str("Debug exception reason: ");
|
|
if (debug_rsn & XCHAL_DEBUGCAUSE_ICOUNT_MASK) {
|
|
panic_print_str("SingleStep ");
|
|
}
|
|
if (debug_rsn & XCHAL_DEBUGCAUSE_IBREAK_MASK) {
|
|
panic_print_str("HwBreakpoint ");
|
|
}
|
|
if (debug_rsn & XCHAL_DEBUGCAUSE_DBREAK_MASK) {
|
|
//Unlike what the ISA manual says, this core seemingly distinguishes from a DBREAK
|
|
//reason caused by watchdog 0 and one caused by watchdog 1 by setting bit 8 of the
|
|
//debugcause if the cause is watchpoint 1 and clearing it if it's watchpoint 0.
|
|
if (debug_rsn & (1 << 8)) {
|
|
#if CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK
|
|
int core = 0;
|
|
|
|
#if !CONFIG_FREERTOS_UNICORE
|
|
if (f == xt_exc_frames[1]) {
|
|
core = 1;
|
|
}
|
|
#endif
|
|
|
|
const char *name = pcTaskGetTaskName(xTaskGetCurrentTaskHandleForCPU(core));
|
|
panic_print_str("Stack canary watchpoint triggered (");
|
|
panic_print_str(name);
|
|
panic_print_str(") ");
|
|
#else
|
|
panic_print_str("Watchpoint 1 triggered ");
|
|
#endif
|
|
} else {
|
|
panic_print_str("Watchpoint 0 triggered ");
|
|
}
|
|
}
|
|
if (debug_rsn & XCHAL_DEBUGCAUSE_BREAK_MASK) {
|
|
panic_print_str("BREAK instr ");
|
|
}
|
|
if (debug_rsn & XCHAL_DEBUGCAUSE_BREAKN_MASK) {
|
|
panic_print_str("BREAKN instr ");
|
|
}
|
|
if (debug_rsn & XCHAL_DEBUGCAUSE_DEBUGINT_MASK) {
|
|
panic_print_str("DebugIntr ");
|
|
}
|
|
}
|
|
|
|
static void print_backtrace_entry(uint32_t pc, uint32_t sp)
|
|
{
|
|
panic_print_str("0x");
|
|
panic_print_hex(pc);
|
|
panic_print_str(":0x");
|
|
panic_print_hex(sp);
|
|
}
|
|
|
|
static void print_backtrace(const void* f, int core)
|
|
{
|
|
XtExcFrame *frame = (XtExcFrame*) f;
|
|
int depth = 100;
|
|
//Initialize stk_frame with first frame of stack
|
|
esp_backtrace_frame_t stk_frame = {.pc = frame->pc, .sp = frame->a1, .next_pc = frame->a0};
|
|
panic_print_str("\r\nBacktrace:");
|
|
print_backtrace_entry(esp_cpu_process_stack_pc(stk_frame.pc), stk_frame.sp);
|
|
|
|
//Check if first frame is valid
|
|
bool corrupted = !(esp_stack_ptr_is_sane(stk_frame.sp) &&
|
|
esp_ptr_executable((void*)esp_cpu_process_stack_pc(stk_frame.pc)));
|
|
|
|
uint32_t i = ((depth <= 0) ? INT32_MAX : depth) - 1; //Account for stack frame that's already printed
|
|
while (i-- > 0 && stk_frame.next_pc != 0 && !corrupted) {
|
|
if (!esp_backtrace_get_next_frame(&stk_frame)) { //Get next stack frame
|
|
corrupted = true;
|
|
}
|
|
panic_print_str(" ");
|
|
print_backtrace_entry(esp_cpu_process_stack_pc(stk_frame.pc), stk_frame.sp);
|
|
}
|
|
|
|
//Print backtrace termination marker
|
|
if (corrupted) {
|
|
panic_print_str(" |<-CORRUPTED");
|
|
} else if (stk_frame.next_pc != 0) { //Backtrace continues
|
|
panic_print_str(" |<-CONTINUES");
|
|
}
|
|
}
|
|
|
|
static void print_registers(const void *f, int core)
|
|
{
|
|
XtExcFrame* frame = (XtExcFrame*) f;
|
|
int *regs = (int *)frame;
|
|
int x, y;
|
|
const char *sdesc[] = {
|
|
"PC ", "PS ", "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ",
|
|
"A6 ", "A7 ", "A8 ", "A9 ", "A10 ", "A11 ", "A12 ", "A13 ",
|
|
"A14 ", "A15 ", "SAR ", "EXCCAUSE", "EXCVADDR", "LBEG ", "LEND ", "LCOUNT "
|
|
};
|
|
|
|
/* only dump registers for 'real' crashes, if crashing via abort()
|
|
the register window is no longer useful.
|
|
*/
|
|
panic_print_str("Core ");
|
|
panic_print_dec(core);
|
|
panic_print_str(" register dump:");
|
|
|
|
for (x = 0; x < 24; x += 4) {
|
|
panic_print_str("\r\n");
|
|
for (y = 0; y < 4; y++) {
|
|
if (sdesc[x + y][0] != 0) {
|
|
panic_print_str(sdesc[x + y]);
|
|
panic_print_str(": 0x");
|
|
panic_print_hex(regs[x + y + 1]);
|
|
panic_print_str(" ");
|
|
}
|
|
}
|
|
}
|
|
|
|
// If the core which triggers the interrupt watchpoint was in ISR context, dump the epc registers.
|
|
if (xPortInterruptedFromISRContext()
|
|
#if !CONFIG_FREERTOS_UNICORE
|
|
&& ((core == 0 && frame->exccause == PANIC_RSN_INTWDT_CPU0) ||
|
|
(core == 1 && frame->exccause == PANIC_RSN_INTWDT_CPU1))
|
|
#endif //!CONFIG_FREERTOS_UNICORE
|
|
) {
|
|
|
|
panic_print_str("\r\n");
|
|
|
|
uint32_t __value;
|
|
panic_print_str("Core ");
|
|
panic_print_dec(core);
|
|
panic_print_str(" was running in ISR context:\r\n");
|
|
|
|
__asm__("rsr.epc1 %0" : "=a"(__value));
|
|
panic_print_str("EPC1 : 0x");
|
|
panic_print_hex(__value);
|
|
|
|
__asm__("rsr.epc2 %0" : "=a"(__value));
|
|
panic_print_str(" EPC2 : 0x");
|
|
panic_print_hex(__value);
|
|
|
|
__asm__("rsr.epc3 %0" : "=a"(__value));
|
|
panic_print_str(" EPC3 : 0x");
|
|
panic_print_hex(__value);
|
|
|
|
__asm__("rsr.epc4 %0" : "=a"(__value));
|
|
panic_print_str(" EPC4 : 0x");
|
|
panic_print_hex(__value);
|
|
}
|
|
}
|
|
|
|
static void print_state_for_core(const void *f, int core)
|
|
{
|
|
if (!g_panic_abort) {
|
|
print_registers(f, core);
|
|
panic_print_str("\r\n");
|
|
}
|
|
print_backtrace(f, core);
|
|
}
|
|
|
|
static void print_state(const void* f)
|
|
{
|
|
#if !CONFIG_FREERTOS_UNICORE
|
|
int err_core = f == xt_exc_frames[0] ? 0 : 1;
|
|
#else
|
|
int err_core = 0;
|
|
#endif
|
|
|
|
print_state_for_core(f, err_core);
|
|
|
|
panic_print_str("\r\n");
|
|
|
|
#if !CONFIG_FREERTOS_UNICORE
|
|
// If there are other frame info, print them as well
|
|
for (int i = 0; i < SOC_CPU_CORES_NUM; i++) {
|
|
// `f` is the frame for the offending core, see note above.
|
|
if (err_core != i && xt_exc_frames[i] != NULL) {
|
|
print_state_for_core(xt_exc_frames[i], i);
|
|
panic_print_str("\r\n");
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32S2
|
|
static inline void print_cache_err_details(const void* f)
|
|
{
|
|
uint32_t vaddr = 0, size = 0;
|
|
uint32_t status[2];
|
|
status[0] = REG_READ(EXTMEM_CACHE_DBG_STATUS0_REG);
|
|
status[1] = REG_READ(EXTMEM_CACHE_DBG_STATUS1_REG);
|
|
for (int i = 0; i < 32; i++) {
|
|
switch (status[0] & BIT(i)) {
|
|
case EXTMEM_IC_SYNC_SIZE_FAULT_ST:
|
|
vaddr = REG_READ(EXTMEM_PRO_ICACHE_MEM_SYNC0_REG);
|
|
size = REG_READ(EXTMEM_PRO_ICACHE_MEM_SYNC1_REG);
|
|
panic_print_str("Icache sync parameter configuration error, the error address and size is 0x");
|
|
panic_print_hex(vaddr);
|
|
panic_print_str("(0x");
|
|
panic_print_hex(size);
|
|
panic_print_str(")\r\n");
|
|
break;
|
|
case EXTMEM_IC_PRELOAD_SIZE_FAULT_ST:
|
|
vaddr = REG_READ(EXTMEM_PRO_ICACHE_PRELOAD_ADDR_REG);
|
|
size = REG_READ(EXTMEM_PRO_ICACHE_PRELOAD_SIZE_REG);
|
|
panic_print_str("Icache preload parameter configuration error, the error address and size is 0x");
|
|
panic_print_hex(vaddr);
|
|
panic_print_str("(0x");
|
|
panic_print_hex(size);
|
|
panic_print_str(")\r\n");
|
|
break;
|
|
case EXTMEM_ICACHE_REJECT_ST:
|
|
vaddr = REG_READ(EXTMEM_PRO_ICACHE_REJECT_VADDR_REG);
|
|
panic_print_str("Icache reject error occurred while accessing the address 0x");
|
|
panic_print_hex(vaddr);
|
|
|
|
if (REG_READ(EXTMEM_PRO_CACHE_MMU_FAULT_CONTENT_REG) & MMU_INVALID) {
|
|
panic_print_str(" (invalid mmu entry)");
|
|
}
|
|
panic_print_str("\r\n");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
switch (status[1] & BIT(i)) {
|
|
case EXTMEM_DC_SYNC_SIZE_FAULT_ST:
|
|
vaddr = REG_READ(EXTMEM_PRO_DCACHE_MEM_SYNC0_REG);
|
|
size = REG_READ(EXTMEM_PRO_DCACHE_MEM_SYNC1_REG);
|
|
panic_print_str("Dcache sync parameter configuration error, the error address and size is 0x");
|
|
panic_print_hex(vaddr);
|
|
panic_print_str("(0x");
|
|
panic_print_hex(size);
|
|
panic_print_str(")\r\n");
|
|
break;
|
|
case EXTMEM_DC_PRELOAD_SIZE_FAULT_ST:
|
|
vaddr = REG_READ(EXTMEM_PRO_DCACHE_PRELOAD_ADDR_REG);
|
|
size = REG_READ(EXTMEM_PRO_DCACHE_PRELOAD_SIZE_REG);
|
|
panic_print_str("Dcache preload parameter configuration error, the error address and size is 0x");
|
|
panic_print_hex(vaddr);
|
|
panic_print_str("(0x");
|
|
panic_print_hex(size);
|
|
panic_print_str(")\r\n");
|
|
break;
|
|
case EXTMEM_DCACHE_WRITE_FLASH_ST:
|
|
panic_print_str("Write back error occurred while dcache tries to write back to flash\r\n");
|
|
break;
|
|
case EXTMEM_DCACHE_REJECT_ST:
|
|
vaddr = REG_READ(EXTMEM_PRO_DCACHE_REJECT_VADDR_REG);
|
|
panic_print_str("Dcache reject error occurred while accessing the address 0x");
|
|
panic_print_hex(vaddr);
|
|
|
|
if (REG_READ(EXTMEM_PRO_CACHE_MMU_FAULT_CONTENT_REG) & MMU_INVALID) {
|
|
panic_print_str(" (invalid mmu entry)");
|
|
}
|
|
panic_print_str("\r\n");
|
|
break;
|
|
case EXTMEM_MMU_ENTRY_FAULT_ST:
|
|
vaddr = REG_READ(EXTMEM_PRO_CACHE_MMU_FAULT_VADDR_REG);
|
|
panic_print_str("MMU entry fault error occurred while accessing the address 0x");
|
|
panic_print_hex(vaddr);
|
|
|
|
if (REG_READ(EXTMEM_PRO_CACHE_MMU_FAULT_CONTENT_REG) & MMU_INVALID) {
|
|
panic_print_str(" (invalid mmu entry)");
|
|
}
|
|
panic_print_str("\r\n");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void frame_to_panic_info(XtExcFrame *frame, panic_info_t* info, bool pseudo_excause)
|
|
{
|
|
info->core = cpu_hal_get_core_id();
|
|
info->exception = PANIC_EXCEPTION_FAULT;
|
|
info->details = NULL;
|
|
|
|
if (pseudo_excause) {
|
|
if (frame->exccause == PANIC_RSN_INTWDT_CPU0) {
|
|
info->core = 0;
|
|
info->exception = PANIC_EXCEPTION_IWDT;
|
|
} else if (frame->exccause == PANIC_RSN_INTWDT_CPU1) {
|
|
info->core = 1;
|
|
info->exception = PANIC_EXCEPTION_IWDT;
|
|
} else if (frame->exccause == PANIC_RSN_CACHEERR) {
|
|
info->core = esp_cache_err_get_cpuid();
|
|
} else {}
|
|
|
|
//Please keep in sync with PANIC_RSN_* defines
|
|
static const char *pseudo_reason[] = {
|
|
"Unknown reason",
|
|
"Unhandled debug exception",
|
|
"Double exception",
|
|
"Unhandled kernel exception",
|
|
"Coprocessor exception",
|
|
"Interrupt wdt timeout on CPU0",
|
|
"Interrupt wdt timeout on CPU1",
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
"Cache disabled but cached memory region accessed",
|
|
#elif CONFIG_IDF_TARGET_ESP32S2
|
|
"Cache exception",
|
|
#endif
|
|
};
|
|
|
|
info->reason = pseudo_reason[0];
|
|
info->description = NULL;
|
|
|
|
if (frame->exccause <= PANIC_RSN_MAX) {
|
|
info->reason = pseudo_reason[frame->exccause];
|
|
}
|
|
|
|
if (frame->exccause == PANIC_RSN_DEBUGEXCEPTION) {
|
|
info->details = print_debug_exception_details;
|
|
info->exception = PANIC_EXCEPTION_DEBUG;
|
|
}
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32S2
|
|
if(frame->exccause == PANIC_RSN_CACHEERR) {
|
|
info->details = print_cache_err_details;
|
|
}
|
|
#endif
|
|
} else {
|
|
static const char *reason[] = {
|
|
"IllegalInstruction", "Syscall", "InstructionFetchError", "LoadStoreError",
|
|
"Level1Interrupt", "Alloca", "IntegerDivideByZero", "PCValue",
|
|
"Privileged", "LoadStoreAlignment", "res", "res",
|
|
"InstrPDAddrError", "LoadStorePIFDataError", "InstrPIFAddrError", "LoadStorePIFAddrError",
|
|
"InstTLBMiss", "InstTLBMultiHit", "InstFetchPrivilege", "res",
|
|
"InstrFetchProhibited", "res", "res", "res",
|
|
"LoadStoreTLBMiss", "LoadStoreTLBMultihit", "LoadStorePrivilege", "res",
|
|
"LoadProhibited", "StoreProhibited", "res", "res",
|
|
"Cp0Dis", "Cp1Dis", "Cp2Dis", "Cp3Dis",
|
|
"Cp4Dis", "Cp5Dis", "Cp6Dis", "Cp7Dis"
|
|
};
|
|
|
|
if (frame->exccause < (sizeof(reason) / sizeof(char *))) {
|
|
info->reason = (reason[frame->exccause]);
|
|
} else {
|
|
info->reason = "Unknown";
|
|
}
|
|
|
|
info->description = "Exception was unhandled.";
|
|
|
|
if (info->reason == reason[0]) {
|
|
info->details = print_illegal_instruction_details;
|
|
}
|
|
}
|
|
|
|
info->state = print_state;
|
|
info->addr = ((void*) ((XtExcFrame*) frame)->pc);
|
|
info->frame = frame;
|
|
}
|
|
|
|
static void panic_handler(XtExcFrame *frame, bool pseudo_excause)
|
|
{
|
|
/*
|
|
* Setup environment and perform necessary architecture/chip specific
|
|
* steps here prior to the system panic handler.
|
|
* */
|
|
int core_id = cpu_hal_get_core_id();
|
|
|
|
// If multiple cores arrive at panic handler, save frames for all of them
|
|
xt_exc_frames[core_id] = frame;
|
|
|
|
#if !CONFIG_FREERTOS_UNICORE
|
|
// These are cases where both CPUs both go into panic handler. The following code ensures
|
|
// only one core proceeds to the system panic handler.
|
|
if (pseudo_excause) {
|
|
#define BUSY_WAIT_IF_TRUE(b) { if (b) while(1); }
|
|
// For WDT expiry, pause the non-offending core - offending core handles panic
|
|
BUSY_WAIT_IF_TRUE(frame->exccause == PANIC_RSN_INTWDT_CPU0 && core_id == 1);
|
|
BUSY_WAIT_IF_TRUE(frame->exccause == PANIC_RSN_INTWDT_CPU1 && core_id == 0);
|
|
|
|
// For cache error, pause the non-offending core - offending core handles panic
|
|
BUSY_WAIT_IF_TRUE(frame->exccause == PANIC_RSN_CACHEERR && core_id != esp_cache_err_get_cpuid());
|
|
}
|
|
|
|
ets_delay_us(1);
|
|
SOC_HAL_STALL_OTHER_CORES();
|
|
#endif
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
esp_dport_access_int_abort();
|
|
#endif
|
|
|
|
#if !CONFIG_ESP_PANIC_HANDLER_IRAM
|
|
// Re-enable CPU cache for current CPU if it was disabled
|
|
if (!spi_flash_cache_enabled()) {
|
|
spi_flash_enable_cache(core_id);
|
|
panic_print_str("Re-enable cpu cache.\r\n");
|
|
}
|
|
#endif
|
|
|
|
if (esp_cpu_in_ocd_debug_mode()) {
|
|
if (frame->exccause == PANIC_RSN_INTWDT_CPU0 ||
|
|
frame->exccause == PANIC_RSN_INTWDT_CPU1) {
|
|
wdt_hal_write_protect_disable(&wdt0_context);
|
|
wdt_hal_handle_intr(&wdt0_context);
|
|
wdt_hal_write_protect_enable(&wdt0_context);
|
|
}
|
|
}
|
|
|
|
// Convert architecture exception frame into abstracted panic info
|
|
panic_info_t info;
|
|
frame_to_panic_info(frame, &info, pseudo_excause);
|
|
|
|
// Call the system panic handler
|
|
esp_panic_handler(&info);
|
|
}
|
|
|
|
void panicHandler(XtExcFrame *frame)
|
|
{
|
|
// This panic handler gets called for when the double exception vector,
|
|
// kernel exception vector gets used; as well as handling interrupt-based
|
|
// faults cache error, wdt expiry. EXCAUSE register gets written with
|
|
// one of PANIC_RSN_* values.
|
|
panic_handler(frame, true);
|
|
}
|
|
|
|
void xt_unhandled_exception(XtExcFrame *frame)
|
|
{
|
|
panic_handler(frame, false);
|
|
}
|
|
|
|
static __attribute__((noreturn)) void esp_digital_reset(void)
|
|
{
|
|
// make sure all the panic handler output is sent from UART FIFO
|
|
uart_tx_wait_idle(CONFIG_ESP_CONSOLE_UART_NUM);
|
|
// switch to XTAL (otherwise we will keep running from the PLL)
|
|
|
|
rtc_clk_cpu_freq_set_xtal();
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
esp_cpu_unstall(PRO_CPU_NUM);
|
|
#endif
|
|
|
|
// reset the digital part
|
|
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_SW_SYS_RST);
|
|
while (true) {
|
|
;
|
|
}
|
|
}
|
|
|
|
void __attribute__((noreturn)) panic_restart(void)
|
|
{
|
|
// If resetting because of a cache error, reset the digital part
|
|
// Make sure that the reset reason is not a generic panic reason as well on ESP32S2,
|
|
// as esp_cache_err_get_cpuid always returns PRO_CPU_NUM
|
|
if (esp_cache_err_get_cpuid() != -1 && esp_reset_reason_get_hint() != ESP_RST_PANIC) {
|
|
esp_digital_reset();
|
|
} else {
|
|
esp_restart_noos();
|
|
}
|
|
} |