OVMS3-idf/components/soc/include/hal/spi_slave_hal.h
2019-05-20 07:34:34 +00:00

151 lines
5.3 KiB
C

// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*******************************************************************************
* NOTICE
* The hal is not public api, don't use in application code.
* See readme.md in soc/include/hal/readme.md
******************************************************************************/
// The HAL layer for SPI slave (common part)
// SPI slave HAL usages:
// 1. initialize the bus
// 2. initialize the DMA descriptors if DMA used
// 3. call setup_device to update parameters for the device
// 4. prepare data to send, and prepare the receiving buffer
// 5. trigger user defined SPI transaction to start
// 6. wait until the user transaction is done
// 7. store the received data and get the length
// 8. check and reset the DMA (if needed) before the next transaction
#pragma once
#include "soc/lldesc.h"
#include "soc/spi_struct.h"
#include <esp_types.h>
/**
* Context that should be maintained by both the driver and the HAL.
*/
typedef struct {
/* configured by driver at initialization, don't touch */
spi_dev_t *hw; ///< Beginning address of the peripheral registers.
/* should be configured by driver at initialization */
lldesc_t *dmadesc_rx; /**< Array of DMA descriptor used by the TX DMA.
* The amount should be larger than dmadesc_n. The driver should ensure that
* the data to be sent is shorter than the descriptors can hold.
*/
lldesc_t *dmadesc_tx; /**< Array of DMA descriptor used by the RX DMA.
* The amount should be larger than dmadesc_n. The driver should ensure that
* the data to be sent is shorter than the descriptors can hold.
*/
int dmadesc_n; ///< The amount of descriptors of both ``dmadesc_tx`` and ``dmadesc_rx`` that the HAL can use.
/*
* configurations to be filled after ``spi_slave_hal_init``. Updated to
* peripheral registers when ``spi_slave_hal_setup_device`` is called.
*/
struct {
uint32_t rx_lsbfirst : 1;
uint32_t tx_lsbfirst : 1;
uint32_t use_dma : 1;
};
int mode;
/*
* Transaction specific (data), all these parameters will be updated to the
* peripheral every transaction.
*/
uint32_t bitlen; ///< Expected maximum length of the transaction, in bits.
const void *tx_buffer; ///< Data to be sent
void *rx_buffer; ///< Buffer to hold the received data.
/* Other transaction result after one transaction */
uint32_t rcv_bitlen; ///< Length of the last transaction, in bits.
} spi_slave_hal_context_t;
/**
* Init the peripheral and the context.
*
* @param hal Context of the HAL layer.
* @param host_id Index of the SPI peripheral. 0 for SPI1, 1 for HSPI (SPI2) and 2 for VSPI (SPI3).
*/
void spi_slave_hal_init(spi_slave_hal_context_t *hal, int host_id);
/**
* Deinit the peripheral (and the context if needed).
*
* @param hal Context of the HAL layer.
*/
void spi_slave_hal_deinit(spi_slave_hal_context_t *hal);
/**
* Setup device-related configurations according to the settings in the context.
*
* @param hal Context of the HAL layer.
*/
void spi_slave_hal_setup_device(const spi_slave_hal_context_t *hal);
/**
* Prepare the data for the current transaction.
*
* @param hal Context of the HAL layer.
*/
void spi_slave_hal_prepare_data(const spi_slave_hal_context_t *hal);
/**
* Trigger start a user-defined transaction.
*
* @param hal Context of the HAL layer.
*/
void spi_slave_hal_user_start(const spi_slave_hal_context_t *hal);
/**
* Check whether the transaction is done (trans_done is set).
*
* @param hal Context of the HAL layer.
*/
bool spi_slave_hal_usr_is_done(spi_slave_hal_context_t* hal);
/**
* Post transaction operations, fetch data from the buffer and recored the length.
*
* @param hal Context of the HAL layer.
*/
void spi_slave_hal_store_result(spi_slave_hal_context_t *hal);
/**
* Get the length of last transaction, in bits. Should be called after ``spi_slave_hal_store_result``.
*
* Note that if last transaction is longer than configured before, the return
* value will be truncated to the configured length.
*
* @param hal Context of the HAL layer.
*
* @return Length of the last transaction, in bits.
*/
uint32_t spi_slave_hal_get_rcv_bitlen(spi_slave_hal_context_t *hal);
/**
* Check whether we need to reset the DMA according to the status of last transactions.
*
* In ESP32, sometimes we may need to reset the DMA for the slave before the
* next transaction. Call this to check it.
*
* @param hal Context of the HAL layer.
*
* @return true if reset is needed, else false.
*/
bool spi_slave_hal_dma_need_reset(const spi_slave_hal_context_t *hal);