d9ce0bb705
The current API is insufficient to allow the users to set different combinations of connection and discoverable mode Users should be able to choose the device modes independently: 1. Connectable- i. Non-connectable mode ii. Connectable mode 2. Discoverable- i. Non-discoverable mode ii. Limited discoverable mode iii. General discoverable mode
219 lines
7.2 KiB
C
219 lines
7.2 KiB
C
/*
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
#include <stdbool.h>
|
|
#include <stdio.h>
|
|
#include "nvs.h"
|
|
#include "nvs_flash.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "esp_log.h"
|
|
#include "esp_bt.h"
|
|
#include "esp_bt_main.h"
|
|
#include "esp_gap_bt_api.h"
|
|
#include "esp_bt_device.h"
|
|
#include "esp_spp_api.h"
|
|
|
|
#include "time.h"
|
|
#include "sys/time.h"
|
|
|
|
#define SPP_TAG "SPP_ACCEPTOR_DEMO"
|
|
#define SPP_SERVER_NAME "SPP_SERVER"
|
|
#define EXCAMPLE_DEVICE_NAME "ESP_SPP_ACCEPTOR"
|
|
#define SPP_SHOW_DATA 0
|
|
#define SPP_SHOW_SPEED 1
|
|
#define SPP_SHOW_MODE SPP_SHOW_SPEED /*Choose show mode: show data or speed*/
|
|
|
|
static const esp_spp_mode_t esp_spp_mode = ESP_SPP_MODE_CB;
|
|
|
|
static struct timeval time_new, time_old;
|
|
static long data_num = 0;
|
|
|
|
static const esp_spp_sec_t sec_mask = ESP_SPP_SEC_AUTHENTICATE;
|
|
static const esp_spp_role_t role_slave = ESP_SPP_ROLE_SLAVE;
|
|
|
|
static void print_speed(void)
|
|
{
|
|
float time_old_s = time_old.tv_sec + time_old.tv_usec / 1000000.0;
|
|
float time_new_s = time_new.tv_sec + time_new.tv_usec / 1000000.0;
|
|
float time_interval = time_new_s - time_old_s;
|
|
float speed = data_num * 8 / time_interval / 1000.0;
|
|
ESP_LOGI(SPP_TAG, "speed(%fs ~ %fs): %f kbit/s" , time_old_s, time_new_s, speed);
|
|
data_num = 0;
|
|
time_old.tv_sec = time_new.tv_sec;
|
|
time_old.tv_usec = time_new.tv_usec;
|
|
}
|
|
|
|
static void esp_spp_cb(esp_spp_cb_event_t event, esp_spp_cb_param_t *param)
|
|
{
|
|
switch (event) {
|
|
case ESP_SPP_INIT_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_SPP_INIT_EVT");
|
|
esp_bt_dev_set_device_name(EXCAMPLE_DEVICE_NAME);
|
|
esp_bt_gap_set_scan_mode(ESP_BT_CONNECTABLE, ESP_BT_GENERAL_DISCOVERABLE);
|
|
esp_spp_start_srv(sec_mask,role_slave, 0, SPP_SERVER_NAME);
|
|
break;
|
|
case ESP_SPP_DISCOVERY_COMP_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_SPP_DISCOVERY_COMP_EVT");
|
|
break;
|
|
case ESP_SPP_OPEN_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_SPP_OPEN_EVT");
|
|
break;
|
|
case ESP_SPP_CLOSE_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_SPP_CLOSE_EVT");
|
|
break;
|
|
case ESP_SPP_START_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_SPP_START_EVT");
|
|
break;
|
|
case ESP_SPP_CL_INIT_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_SPP_CL_INIT_EVT");
|
|
break;
|
|
case ESP_SPP_DATA_IND_EVT:
|
|
#if (SPP_SHOW_MODE == SPP_SHOW_DATA)
|
|
ESP_LOGI(SPP_TAG, "ESP_SPP_DATA_IND_EVT len=%d handle=%d",
|
|
param->data_ind.len, param->data_ind.handle);
|
|
esp_log_buffer_hex("",param->data_ind.data,param->data_ind.len);
|
|
#else
|
|
gettimeofday(&time_new, NULL);
|
|
data_num += param->data_ind.len;
|
|
if (time_new.tv_sec - time_old.tv_sec >= 3) {
|
|
print_speed();
|
|
}
|
|
#endif
|
|
break;
|
|
case ESP_SPP_CONG_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_SPP_CONG_EVT");
|
|
break;
|
|
case ESP_SPP_WRITE_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_SPP_WRITE_EVT");
|
|
break;
|
|
case ESP_SPP_SRV_OPEN_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_SPP_SRV_OPEN_EVT");
|
|
gettimeofday(&time_old, NULL);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void esp_bt_gap_cb(esp_bt_gap_cb_event_t event, esp_bt_gap_cb_param_t *param)
|
|
{
|
|
switch (event) {
|
|
case ESP_BT_GAP_AUTH_CMPL_EVT:{
|
|
if (param->auth_cmpl.stat == ESP_BT_STATUS_SUCCESS) {
|
|
ESP_LOGI(SPP_TAG, "authentication success: %s", param->auth_cmpl.device_name);
|
|
esp_log_buffer_hex(SPP_TAG, param->auth_cmpl.bda, ESP_BD_ADDR_LEN);
|
|
} else {
|
|
ESP_LOGE(SPP_TAG, "authentication failed, status:%d", param->auth_cmpl.stat);
|
|
}
|
|
break;
|
|
}
|
|
case ESP_BT_GAP_PIN_REQ_EVT:{
|
|
ESP_LOGI(SPP_TAG, "ESP_BT_GAP_PIN_REQ_EVT min_16_digit:%d", param->pin_req.min_16_digit);
|
|
if (param->pin_req.min_16_digit) {
|
|
ESP_LOGI(SPP_TAG, "Input pin code: 0000 0000 0000 0000");
|
|
esp_bt_pin_code_t pin_code = {0};
|
|
esp_bt_gap_pin_reply(param->pin_req.bda, true, 16, pin_code);
|
|
} else {
|
|
ESP_LOGI(SPP_TAG, "Input pin code: 1234");
|
|
esp_bt_pin_code_t pin_code;
|
|
pin_code[0] = '1';
|
|
pin_code[1] = '2';
|
|
pin_code[2] = '3';
|
|
pin_code[3] = '4';
|
|
esp_bt_gap_pin_reply(param->pin_req.bda, true, 4, pin_code);
|
|
}
|
|
break;
|
|
}
|
|
|
|
#if (CONFIG_BT_SSP_ENABLED == true)
|
|
case ESP_BT_GAP_CFM_REQ_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_BT_GAP_CFM_REQ_EVT Please compare the numeric value: %d", param->cfm_req.num_val);
|
|
esp_bt_gap_ssp_confirm_reply(param->cfm_req.bda, true);
|
|
break;
|
|
case ESP_BT_GAP_KEY_NOTIF_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_BT_GAP_KEY_NOTIF_EVT passkey:%d", param->key_notif.passkey);
|
|
break;
|
|
case ESP_BT_GAP_KEY_REQ_EVT:
|
|
ESP_LOGI(SPP_TAG, "ESP_BT_GAP_KEY_REQ_EVT Please enter passkey!");
|
|
break;
|
|
#endif
|
|
|
|
default: {
|
|
ESP_LOGI(SPP_TAG, "event: %d", event);
|
|
break;
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
void app_main()
|
|
{
|
|
esp_err_t ret = nvs_flash_init();
|
|
if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
|
|
ESP_ERROR_CHECK(nvs_flash_erase());
|
|
ret = nvs_flash_init();
|
|
}
|
|
ESP_ERROR_CHECK( ret );
|
|
|
|
ESP_ERROR_CHECK(esp_bt_controller_mem_release(ESP_BT_MODE_BLE));
|
|
|
|
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
|
|
if ((ret = esp_bt_controller_init(&bt_cfg)) != ESP_OK) {
|
|
ESP_LOGE(SPP_TAG, "%s initialize controller failed: %s\n", __func__, esp_err_to_name(ret));
|
|
return;
|
|
}
|
|
|
|
if ((ret = esp_bt_controller_enable(ESP_BT_MODE_CLASSIC_BT)) != ESP_OK) {
|
|
ESP_LOGE(SPP_TAG, "%s enable controller failed: %s\n", __func__, esp_err_to_name(ret));
|
|
return;
|
|
}
|
|
|
|
if ((ret = esp_bluedroid_init()) != ESP_OK) {
|
|
ESP_LOGE(SPP_TAG, "%s initialize bluedroid failed: %s\n", __func__, esp_err_to_name(ret));
|
|
return;
|
|
}
|
|
|
|
if ((ret = esp_bluedroid_enable()) != ESP_OK) {
|
|
ESP_LOGE(SPP_TAG, "%s enable bluedroid failed: %s\n", __func__, esp_err_to_name(ret));
|
|
return;
|
|
}
|
|
|
|
if ((ret = esp_bt_gap_register_callback(esp_bt_gap_cb)) != ESP_OK) {
|
|
ESP_LOGE(SPP_TAG, "%s gap register failed: %s\n", __func__, esp_err_to_name(ret));
|
|
return;
|
|
}
|
|
|
|
if ((ret = esp_spp_register_callback(esp_spp_cb)) != ESP_OK) {
|
|
ESP_LOGE(SPP_TAG, "%s spp register failed: %s\n", __func__, esp_err_to_name(ret));
|
|
return;
|
|
}
|
|
|
|
if ((ret = esp_spp_init(esp_spp_mode)) != ESP_OK) {
|
|
ESP_LOGE(SPP_TAG, "%s spp init failed: %s\n", __func__, esp_err_to_name(ret));
|
|
return;
|
|
}
|
|
|
|
#if (CONFIG_BT_SSP_ENABLED == true)
|
|
/* Set default parameters for Secure Simple Pairing */
|
|
esp_bt_sp_param_t param_type = ESP_BT_SP_IOCAP_MODE;
|
|
esp_bt_io_cap_t iocap = ESP_BT_IO_CAP_IO;
|
|
esp_bt_gap_set_security_param(param_type, &iocap, sizeof(uint8_t));
|
|
#endif
|
|
|
|
/*
|
|
* Set default parameters for Legacy Pairing
|
|
* Use variable pin, input pin code when pairing
|
|
*/
|
|
esp_bt_pin_type_t pin_type = ESP_BT_PIN_TYPE_VARIABLE;
|
|
esp_bt_pin_code_t pin_code;
|
|
esp_bt_gap_set_pin(pin_type, 0, pin_code);
|
|
}
|
|
|