OVMS3-idf/components/spi_flash/test/test_esp_flash.c
2019-06-18 06:32:52 +00:00

549 lines
18 KiB
C

#include <stdio.h>
#include <string.h>
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <freertos/semphr.h>
#include <unity.h>
#include "esp_flash.h"
#include "spi_flash_chip_generic.h"
#include <esp_attr.h>
#include "esp_log.h"
#include <test_utils.h>
#include "unity.h"
#include "driver/spi_common.h"
#include "memspi_host_driver.h"
#include "driver/gpio.h"
#include "soc/io_mux_reg.h"
#define FUNC_SPI 1
static uint8_t sector_buf[4096];
// #define TEST_SPI1_CS1
// #define TEST_SPI2_CS0
// #define TEST_SPI3_CS0
#define TEST_SPI_SPEED ESP_FLASH_10MHZ
#define TEST_SPI_READ_MODE SPI_FLASH_FASTRD
//#define FORCE_GPIO_MATRIX
#ifdef TEST_SPI2_CS0
#define TEST_HOST HSPI_HOST
#define TEST_CS 0
#define TEST_CS_PIN HSPI_IOMUX_PIN_NUM_CS
#define HSPI_PIN_NUM_MOSI HSPI_IOMUX_PIN_NUM_MOSI
#define HSPI_PIN_NUM_MISO HSPI_IOMUX_PIN_NUM_MISO
#define HSPI_PIN_NUM_CLK HSPI_IOMUX_PIN_NUM_CLK
#define HSPI_PIN_NUM_HD HSPI_IOMUX_PIN_NUM_HD
#define HSPI_PIN_NUM_WP HSPI_IOMUX_PIN_NUM_WP
#define TEST_INPUT_DELAY 20
#elif defined TEST_SPI3_CS0
#define TEST_HOST VSPI_HOST
#define TEST_CS 0
#define TEST_CS_PIN VSPI_IOMUX_PIN_NUM_CS
#define VSPI_PIN_NUM_MOSI VSPI_IOMUX_PIN_NUM_MOSI
#define VSPI_PIN_NUM_MISO VSPI_IOMUX_PIN_NUM_MISO
#define VSPI_PIN_NUM_CLK VSPI_IOMUX_PIN_NUM_CLK
#define VSPI_PIN_NUM_HD VSPI_IOMUX_PIN_NUM_HD
#define VSPI_PIN_NUM_WP VSPI_IOMUX_PIN_NUM_WP
#define TEST_INPUT_DELAY 0
#elif defined TEST_SPI1_CS1
#define TEST_HOST SPI_HOST
#define TEST_CS 1
// #define TEST_CS_PIN 14
#define TEST_CS_PIN 16 //the pin which is usually used by the PSRAM
// #define TEST_CS_PIN 27
#define TEST_INPUT_DELAY 25
#define EXTRA_SPI1_CLK_IO 17 //the pin which is usually used by the PSRAM clk
#else
#define SKIP_EXTENDED_CHIP_TEST
#endif
static const char TAG[] = "test_esp_flash";
#ifndef SKIP_EXTENDED_CHIP_TEST
static esp_flash_t *test_chip = NULL;
static esp_flash_t chip_init;
static spi_flash_host_driver_t chip_host_driver;
static memspi_host_data_t driver_data = {};
static void IRAM_ATTR cs_initialize(spi_host_device_t host, int cs_io_num, int cs_num, bool use_iomux)
{
int spics_in = spi_periph_signal[host].spics_in;
int spics_out = spi_periph_signal[host].spics_out[cs_num];
uint32_t iomux_reg = GPIO_PIN_MUX_REG[TEST_CS_PIN];
//to avoid the panic caused by flash data line conflicts during cs line initialization, disable the cache temporarily
//some data from flash to be used should be read before the cache disabling
g_flash_guard_default_ops.start();
if (use_iomux) {
GPIO.func_in_sel_cfg[spics_in].sig_in_sel = 0;
PIN_INPUT_ENABLE(iomux_reg);
GPIO.func_out_sel_cfg[spics_out].oen_sel = 0;
GPIO.func_out_sel_cfg[spics_out].oen_inv_sel = false;
PIN_FUNC_SELECT(iomux_reg, FUNC_SPI);
} else {
PIN_INPUT_ENABLE(iomux_reg);
if (cs_io_num < 32) {
GPIO.enable_w1ts = (0x1 << cs_io_num);
} else {
GPIO.enable1_w1ts.data = (0x1 << (cs_io_num - 32));
}
GPIO.pin[cs_io_num].pad_driver = 0;
gpio_matrix_out(cs_io_num, spics_out, false, false);
if (cs_num == 0) {
gpio_matrix_in(cs_io_num, spics_in, false);
}
PIN_FUNC_SELECT(iomux_reg, PIN_FUNC_GPIO);
}
g_flash_guard_default_ops.end();
}
static void setup_new_chip(esp_flash_read_mode_t io_mode, esp_flash_speed_t speed)
{
chip_init = (esp_flash_t) {
.read_mode = io_mode,
};
#ifdef TEST_SPI2_CS0
bool spi_chan_claimed = spicommon_periph_claim(HSPI_HOST, "spi flash");
TEST_ASSERT(spi_chan_claimed);
spi_bus_config_t hspi_bus_cfg = {
.mosi_io_num = HSPI_PIN_NUM_MOSI,
.miso_io_num = HSPI_PIN_NUM_MISO,
.sclk_io_num = HSPI_PIN_NUM_CLK,
.quadhd_io_num = HSPI_PIN_NUM_HD,
.quadwp_io_num = HSPI_PIN_NUM_WP,
.max_transfer_sz = 64,
};
#ifdef FORCE_GPIO_MATRIX
hspi_bus_cfg.quadhd_io_num = 23;
#endif
uint32_t flags;
esp_err_t ret = spicommon_bus_initialize_io(HSPI_HOST, &hspi_bus_cfg, 0, SPICOMMON_BUSFLAG_MASTER | (&hspi_bus_cfg)->flags, &flags);
TEST_ESP_OK(ret);
bool use_iomux = (flags & SPICOMMON_BUSFLAG_NATIVE_PINS) ? 1 : 0;
printf("setup flash on SPI2 (HSPI) CS0...\n");
printf("use iomux:%d\n", use_iomux);
memspi_host_config_t cfg = {
.host_id = 2,
.speed = speed,
.iomux = use_iomux,
.cs_num = TEST_CS,
.input_delay_ns = TEST_INPUT_DELAY,
};
#elif defined TEST_SPI3_CS0
bool spi_chan_claimed = spicommon_periph_claim(VSPI_HOST, "spi flash");
TEST_ASSERT(spi_chan_claimed);
spi_bus_config_t vspi_bus_cfg = {
.mosi_io_num = VSPI_PIN_NUM_MOSI,
.miso_io_num = VSPI_PIN_NUM_MISO,
.sclk_io_num = VSPI_PIN_NUM_CLK,
.quadhd_io_num = VSPI_PIN_NUM_HD,
.quadwp_io_num = VSPI_PIN_NUM_WP,
.max_transfer_sz = 64,
};
#ifdef FORCE_GPIO_MATRIX
vspi_bus_cfg.quadhd_io_num = 23;
#endif
uint32_t flags;
esp_err_t ret = spicommon_bus_initialize_io(VSPI_HOST, &vspi_bus_cfg, 0, SPICOMMON_BUSFLAG_MASTER | (&vspi_bus_cfg)->flags, &flags);
TEST_ESP_OK(ret);
bool use_iomux = (flags & SPICOMMON_BUSFLAG_NATIVE_PINS) ? 1 : 0;
//TEST_ASSERT(use_iomux);
printf("setup flash on SPI3 (VSPI) CS0...\n");
printf("use iomux:%d\n", use_iomux);
memspi_host_config_t cfg = {
.host_id = 3,
.speed = speed,
.iomux = use_iomux,
.cs_num = TEST_CS,
.input_delay_ns = TEST_INPUT_DELAY,
};
#elif defined TEST_SPI1_CS1
printf("setup flash on SPI1 CS1...\n");
memspi_host_config_t cfg = {
.host_id = 1,
.speed = speed,
.iomux = true,
.cs_num = TEST_CS,
.input_delay_ns = TEST_INPUT_DELAY,
};
bool use_iomux = (TEST_CS_PIN == spi_periph_signal[TEST_HOST].spics0_iomux_pin) && (driver_data.cs_num == 0);
# ifdef EXTRA_SPI1_CLK_IO
gpio_matrix_out(EXTRA_SPI1_CLK_IO, SPICLK_OUT_IDX, 0, 0);
# endif
#endif
esp_err_t err = memspi_host_init_pointers(&chip_host_driver, &driver_data, &cfg);
cs_initialize(TEST_HOST, TEST_CS_PIN, driver_data.cs_num, use_iomux);
TEST_ESP_OK(err);
chip_init.host = &chip_host_driver;
esp_flash_init_os_functions(&chip_init, TEST_HOST);
err = esp_flash_init(&chip_init);
TEST_ESP_OK(err);
test_chip = &chip_init;
}
void teardown_test_chip()
{
if (TEST_HOST == HSPI_HOST || TEST_HOST == VSPI_HOST) {
spicommon_periph_free(TEST_HOST);
}
}
#endif
static void test_metadata(esp_flash_t *chip)
{
ESP_LOGI(TAG, "Testing chip %p...", chip);
uint32_t id, size;
TEST_ESP_OK(esp_flash_read_id(chip, &id));
TEST_ESP_OK(esp_flash_get_size(chip, &size));
printf("Flash ID %08x detected size %d bytes\n", id, size);
}
TEST_CASE("SPI flash metadata functions", "[esp_flash]")
{
#ifndef SKIP_EXTENDED_CHIP_TEST
setup_new_chip(TEST_SPI_READ_MODE, TEST_SPI_SPEED);
test_metadata(test_chip);
teardown_test_chip();
#endif
test_metadata(NULL);
}
static uint32_t erase_test_region(esp_flash_t *chip, int num_sectors)
{
const esp_partition_t *part = get_test_data_partition();
uint32_t offs = part->address;
/* chip should be initialised */
TEST_ASSERT(esp_flash_default_chip != NULL
&& esp_flash_chip_driver_initialized(esp_flash_default_chip));
TEST_ASSERT(num_sectors * 4096 <= part->size);
bzero(sector_buf, sizeof(sector_buf));
printf("Erase @ 0x%x...\n", offs);
TEST_ASSERT_EQUAL_HEX32(ESP_OK, esp_flash_erase_region(chip, offs, num_sectors * 4096) );
printf("Verify erased...\n");
for (int i = 0; i < num_sectors; i++) {
TEST_ASSERT_EQUAL_HEX32(ESP_OK, esp_flash_read(chip, sector_buf, offs + i * 4096, sizeof(sector_buf)));
printf("Buffer starts 0x%02x 0x%02x 0x%02x 0x%02x\n", sector_buf[0], sector_buf[1], sector_buf[2], sector_buf[3]);
for (int i = 0; i < sizeof(sector_buf); i++) {
TEST_ASSERT_EQUAL_HEX8(0xFF, sector_buf[i]);
}
}
return offs;
}
void test_simple_read_write(void *chip)
{
ESP_LOGI(TAG, "Testing chip %p...", chip);
uint32_t offs = erase_test_region(chip, 1);
const int test_seed = 778;
srand(test_seed);
for (int i = 0 ; i < sizeof(sector_buf); i++) {
sector_buf[i] = rand();
}
printf("Write %p...\n", (void *)offs);
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_write(chip, sector_buf, offs, sizeof(sector_buf)) );
bzero(sector_buf, sizeof(sector_buf));
printf("Read back...\n");
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_read(chip, sector_buf, offs, sizeof(sector_buf)) );
printf("Buffer starts 0x%02x 0x%02x 0x%02x 0x%02x\n", sector_buf[0], sector_buf[1], sector_buf[2], sector_buf[3]);
srand(test_seed);
for (int i = 0; i < sizeof(sector_buf); i++) {
TEST_ASSERT_EQUAL_HEX8(rand() & 0xFF, sector_buf[i]);
}
}
TEST_CASE("SPI flash simple read/write", "[esp_flash]")
{
test_simple_read_write(NULL);
#ifndef SKIP_EXTENDED_CHIP_TEST
setup_new_chip(TEST_SPI_READ_MODE, TEST_SPI_SPEED);
test_simple_read_write(test_chip);
teardown_test_chip();
#endif
}
void test_unaligned_read_write(void *chip)
{
ESP_LOGI(TAG, "Testing chip %p...", chip);
uint32_t offs = erase_test_region(chip, 2);
const char *msg = "i am a message";
TEST_ASSERT(strlen(msg) + 1 % 4 != 0);
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_write(chip, msg, offs + 1, strlen(msg) + 1) );
char buf[strlen(msg) + 1];
memset(buf, 0xEE, sizeof(buf));
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_read(chip, buf, offs + 1, strlen(msg) + 1) );
TEST_ASSERT_EQUAL_STRING_LEN(msg, buf, strlen(msg));
TEST_ASSERT(memcmp(buf, msg, strlen(msg) + 1) == 0);
}
TEST_CASE("SPI flash unaligned read/write", "[esp_flash]")
{
#ifndef SKIP_EXTENDED_CHIP_TEST
setup_new_chip(TEST_SPI_READ_MODE, TEST_SPI_SPEED);
test_unaligned_read_write(test_chip);
teardown_test_chip();
#endif
test_unaligned_read_write(NULL);
}
void test_single_read_write(void *chip)
{
ESP_LOGI(TAG, "Testing chip %p...", chip);
uint32_t offs = erase_test_region(chip, 2);
for (unsigned v = 0; v < 512; v++) {
TEST_ASSERT_EQUAL_HEX(ESP_OK, esp_flash_write(chip, &v, offs + v, 1) );
}
for (unsigned v = 0; v < 512; v++) {
uint8_t readback;
TEST_ASSERT_EQUAL_HEX(ESP_OK, esp_flash_read(chip, &readback, offs + v, 1) );
TEST_ASSERT_EQUAL_HEX8(v, readback);
}
}
TEST_CASE("SPI flash single byte reads/writes", "[esp_flash]")
{
test_single_read_write(NULL);
#ifndef SKIP_EXTENDED_CHIP_TEST
setup_new_chip(TEST_SPI_READ_MODE, TEST_SPI_SPEED);
test_single_read_write(test_chip);
teardown_test_chip();
#endif
}
/* this test is notable because it generates a lot of unaligned reads/writes,
and also reads/writes across both a sector boundary & many page boundaries.
*/
void test_three_byte_read_write(void *chip)
{
ESP_LOGI(TAG, "Testing chip %p...", chip);
uint32_t offs = erase_test_region(chip, 2);
ets_printf("offs:%X\n", offs);
for (uint32_t v = 0; v < 2000; v++) {
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_write(chip, &v, offs + 3 * v, 3) );
}
for (uint32_t v = 0; v < 2000; v++) {
uint32_t readback;
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_read(chip, &readback, offs + 3 * v, 3) );
TEST_ASSERT_EQUAL_HEX32(v & 0xFFFFFF, readback & 0xFFFFFF);
}
}
TEST_CASE("SPI flash three byte reads/writes", "[esp_flash]")
{
#ifndef SKIP_EXTENDED_CHIP_TEST
setup_new_chip(TEST_SPI_READ_MODE, TEST_SPI_SPEED);
test_three_byte_read_write(test_chip);
teardown_test_chip();
#endif
test_three_byte_read_write(NULL);
}
void test_erase_large_region(esp_flash_t *chip)
{
ESP_LOGI(TAG, "Testing chip %p...", chip);
const esp_partition_t *part = get_test_data_partition();
/* Write some noise at the start and the end of the region */
const char *ohai = "OHAI";
uint32_t readback;
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_write(chip, ohai, part->address, 5));
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_write(chip, ohai, part->address + part->size - 5, 5));
/* sanity check what we just wrote. since the partition may haven't been erased, we only check the part which is written to 0. */
uint32_t written_data = *((const uint32_t *)ohai);
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_read(chip, &readback, part->address + part->size - 5, 4));
TEST_ASSERT_EQUAL_HEX32(0, readback & (~written_data));
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_read(chip, &readback, part->address, 4));
TEST_ASSERT_EQUAL_HEX32(0, readback & (~written_data));
/* Erase whole region */
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_erase_region(chip, part->address, part->size));
/* ensure both areas we wrote are now all-FFs */
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_read(chip, &readback, part->address, 4));
TEST_ASSERT_EQUAL_HEX32(0xFFFFFFFF, readback);
TEST_ASSERT_EQUAL(ESP_OK, esp_flash_read(chip, &readback, part->address + part->size - 5, 4));
TEST_ASSERT_EQUAL_HEX32(0xFFFFFFFF, readback);
}
TEST_CASE("SPI flash erase large region", "[esp_flash]")
{
test_erase_large_region(NULL);
#ifndef SKIP_EXTENDED_CHIP_TEST
setup_new_chip(TEST_SPI_READ_MODE, TEST_SPI_SPEED);
test_erase_large_region(test_chip);
teardown_test_chip();
#endif
}
static const uint8_t large_const_buffer[16400] = {
203, // first byte
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,
21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37,
[50 ... 99] = 2,
[1600 ... 2000] = 3,
[8000 ... 9000] = 77,
[15000 ... 16398] = 8,
43 // last byte
};
static void test_write_large_buffer(esp_flash_t *chip, const uint8_t *source, size_t length);
static void write_large_buffer(esp_flash_t *chip, const esp_partition_t *part, const uint8_t *source, size_t length);
static void read_and_check(esp_flash_t *chip, const esp_partition_t *part, const uint8_t *source, size_t length);
TEST_CASE("SPI flash test reading with all speed/mode permutations", "[esp_flash]")
{
const int length = sizeof(large_const_buffer);
uint8_t *source_buf = malloc(length);
TEST_ASSERT_NOT_NULL(source_buf);
srand(778);
for (int i = 0; i < length; i++) {
source_buf[i] = rand();
}
const esp_partition_t *part = get_test_data_partition();
TEST_ASSERT(part->size > length + 2 + SPI_FLASH_SEC_SIZE);
#ifndef SKIP_EXTENDED_CHIP_TEST
//use the lowest speed to write and read to make sure success
setup_new_chip(TEST_SPI_READ_MODE, ESP_FLASH_SPEED_MIN);
write_large_buffer(test_chip, part, source_buf, length);
read_and_check(test_chip, part, source_buf, length);
teardown_test_chip();
esp_flash_read_mode_t io_mode = SPI_FLASH_READ_MODE_MIN;
while (io_mode != SPI_FLASH_READ_MODE_MAX) {
esp_flash_speed_t speed = ESP_FLASH_SPEED_MIN;
while (speed != ESP_FLASH_SPEED_MAX) {
ESP_LOGI(TAG, "test flash io mode: %d, speed: %d", io_mode, speed);
setup_new_chip(io_mode, speed);
read_and_check(test_chip, part, source_buf, length);
teardown_test_chip();
speed++;
}
io_mode++;
}
#endif
//test main flash BTW
write_large_buffer(NULL, part, source_buf, length);
read_and_check(NULL, part, source_buf, length);
free(source_buf);
}
TEST_CASE("Test esp_flash_write large const buffer", "[esp_flash]")
{
//buffer in flash
test_write_large_buffer(NULL, large_const_buffer, sizeof(large_const_buffer));
#ifndef SKIP_EXTENDED_CHIP_TEST
setup_new_chip(TEST_SPI_READ_MODE, TEST_SPI_SPEED);
test_write_large_buffer(test_chip, large_const_buffer, sizeof(large_const_buffer));
teardown_test_chip();
#endif
}
#ifndef SKIP_EXTENDED_CHIP_TEST
TEST_CASE("Test esp_flash_write large RAM buffer", "[esp_flash]")
{
// buffer in RAM
uint8_t *source_buf = malloc(sizeof(large_const_buffer));
TEST_ASSERT_NOT_NULL(source_buf);
memcpy(source_buf, large_const_buffer, sizeof(large_const_buffer));
setup_new_chip(TEST_SPI_READ_MODE, TEST_SPI_SPEED);
test_write_large_buffer(test_chip, source_buf, sizeof(large_const_buffer));
teardown_test_chip();
free(source_buf);
}
#endif
static void write_large_buffer(esp_flash_t *chip, const esp_partition_t *part, const uint8_t *source, size_t length)
{
printf("Writing chip %p, %d bytes from source %p\n", chip, length, source);
ESP_ERROR_CHECK( esp_flash_erase_region(chip, part->address, (length + SPI_FLASH_SEC_SIZE) & ~(SPI_FLASH_SEC_SIZE - 1)) );
// note writing to unaligned address
ESP_ERROR_CHECK( esp_flash_write(chip, source, part->address + 1, length) );
}
static void read_and_check(esp_flash_t *chip, const esp_partition_t *part, const uint8_t *source, size_t length)
{
printf("Checking chip %p, %d bytes\n", chip, length);
uint8_t *buf = malloc(length);
TEST_ASSERT_NOT_NULL(buf);
ESP_ERROR_CHECK( esp_flash_read(chip, buf, part->address + 1, length) );
TEST_ASSERT_EQUAL_HEX8_ARRAY(source, buf, length);
free(buf);
// check nothing was written at beginning or end
uint8_t ends[8];
ESP_ERROR_CHECK( esp_flash_read(chip, ends, part->address, sizeof(ends)) );
TEST_ASSERT_EQUAL_HEX8(0xFF, ends[0]);
TEST_ASSERT_EQUAL_HEX8(source[0], ends[1]);
ESP_ERROR_CHECK( esp_flash_read(chip, ends, part->address + length, sizeof(ends)) );
TEST_ASSERT_EQUAL_HEX8(source[length - 1], ends[0]);
TEST_ASSERT_EQUAL_HEX8(0xFF, ends[1]);
TEST_ASSERT_EQUAL_HEX8(0xFF, ends[2]);
TEST_ASSERT_EQUAL_HEX8(0xFF, ends[3]);
}
static void test_write_large_buffer(esp_flash_t *chip, const uint8_t *source, size_t length)
{
ESP_LOGI(TAG, "Testing chip %p...", chip);
const esp_partition_t *part = get_test_data_partition();
TEST_ASSERT(part->size > length + 2 + SPI_FLASH_SEC_SIZE);
write_large_buffer(chip, part, source, length);
read_and_check(chip, part, source, length);
}