Make the link local negotiation for IPV6 in PPP optional and configurable. This is because some modems do not support the IPV6 negotiation and sending IPV6CP frames would in some cases break the network configuration phase, resulting in a timeout during the Phase Network. Please note that this does not disable the IPV6 support for the outgoing communication (IPV6 is still enabled even if this option is not selected) but just for the local link between lwIP and modem. Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com> Merges https://github.com/espressif/esp-idf/pull/4782 Closes https://github.com/espressif/esp-idf/issues/1065
885 lines
27 KiB
C
885 lines
27 KiB
C
/*
|
|
* Copyright (c) 2001-2003 Swedish Institute of Computer Science.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
|
|
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
|
|
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
* OF SUCH DAMAGE.
|
|
*
|
|
* This file is part of the lwIP TCP/IP stack.
|
|
*
|
|
* Author: Simon Goldschmidt
|
|
*
|
|
*/
|
|
#ifndef __LWIPOPTS_H__
|
|
#define __LWIPOPTS_H__
|
|
|
|
#include <stdlib.h>
|
|
#include <time.h>
|
|
#include <unistd.h>
|
|
#include <sys/time.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/types.h>
|
|
#include <sys/select.h>
|
|
#include "esp_task.h"
|
|
#include "esp_system.h"
|
|
#include "sdkconfig.h"
|
|
#include "sntp.h"
|
|
#include "netif/dhcp_state.h"
|
|
|
|
/* Enable all Espressif-only options */
|
|
|
|
/*
|
|
-----------------------------------------------
|
|
---------- Platform specific locking ----------
|
|
-----------------------------------------------
|
|
*/
|
|
/**
|
|
* SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
|
|
* critical regions during buffer allocation, deallocation and memory
|
|
* allocation and deallocation.
|
|
*/
|
|
#define SYS_LIGHTWEIGHT_PROT 1
|
|
|
|
/**
|
|
* MEMCPY: override this if you have a faster implementation at hand than the
|
|
* one included in your C library
|
|
*/
|
|
#define MEMCPY(dst,src,len) memcpy(dst,src,len)
|
|
|
|
/**
|
|
* SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
|
|
* call to memcpy() if the length is known at compile time and is small.
|
|
*/
|
|
#define SMEMCPY(dst,src,len) memcpy(dst,src,len)
|
|
|
|
#define LWIP_RAND esp_random
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- Memory options ----------
|
|
------------------------------------
|
|
*/
|
|
/**
|
|
* MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
|
|
* instead of the lwip internal allocator. Can save code size if you
|
|
* already use it.
|
|
*/
|
|
#define MEM_LIBC_MALLOC 1
|
|
|
|
/**
|
|
* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator.
|
|
* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution
|
|
* speed and usage from interrupts!
|
|
*/
|
|
#define MEMP_MEM_MALLOC 1
|
|
|
|
/**
|
|
* MEM_ALIGNMENT: should be set to the alignment of the CPU
|
|
* 4 byte alignment -> #define MEM_ALIGNMENT 4
|
|
* 2 byte alignment -> #define MEM_ALIGNMENT 2
|
|
*/
|
|
#define MEM_ALIGNMENT 4
|
|
|
|
/*
|
|
------------------------------------------------
|
|
---------- Internal Memory Pool Sizes ----------
|
|
------------------------------------------------
|
|
*/
|
|
|
|
/**
|
|
* MEMP_NUM_NETCONN: the number of struct netconns.
|
|
* (only needed if you use the sequential API, like api_lib.c)
|
|
*/
|
|
#define MEMP_NUM_NETCONN CONFIG_LWIP_MAX_SOCKETS
|
|
|
|
/**
|
|
* MEMP_NUM_RAW_PCB: Number of raw connection PCBs
|
|
* (requires the LWIP_RAW option)
|
|
*/
|
|
#define MEMP_NUM_RAW_PCB CONFIG_LWIP_MAX_RAW_PCBS
|
|
|
|
/**
|
|
* MEMP_NUM_TCP_PCB: the number of simultaneously active TCP connections.
|
|
* (requires the LWIP_TCP option)
|
|
*/
|
|
#define MEMP_NUM_TCP_PCB CONFIG_LWIP_MAX_ACTIVE_TCP
|
|
|
|
/**
|
|
* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
|
|
* (requires the LWIP_TCP option)
|
|
*/
|
|
#define MEMP_NUM_TCP_PCB_LISTEN CONFIG_LWIP_MAX_LISTENING_TCP
|
|
|
|
/**
|
|
* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
|
|
* per active UDP "connection".
|
|
* (requires the LWIP_UDP option)
|
|
*/
|
|
#define MEMP_NUM_UDP_PCB CONFIG_LWIP_MAX_UDP_PCBS
|
|
|
|
/*
|
|
--------------------------------
|
|
---------- ARP options -------
|
|
--------------------------------
|
|
*/
|
|
/**
|
|
* ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address
|
|
* resolution. By default, only the most recent packet is queued per IP address.
|
|
* This is sufficient for most protocols and mainly reduces TCP connection
|
|
* startup time. Set this to 1 if you know your application sends more than one
|
|
* packet in a row to an IP address that is not in the ARP cache.
|
|
*/
|
|
#define ARP_QUEUEING 1
|
|
|
|
/*
|
|
--------------------------------
|
|
---------- IP options ----------
|
|
--------------------------------
|
|
*/
|
|
/**
|
|
* IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that
|
|
* this option does not affect outgoing packet sizes, which can be controlled
|
|
* via IP_FRAG.
|
|
*/
|
|
#define IP_REASSEMBLY CONFIG_LWIP_IP_REASSEMBLY
|
|
|
|
/**
|
|
* IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note
|
|
* that this option does not affect incoming packet sizes, which can be
|
|
* controlled via IP_REASSEMBLY.
|
|
*/
|
|
#define IP_FRAG CONFIG_LWIP_IP_FRAG
|
|
|
|
/**
|
|
* IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
|
|
* a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
|
|
* in this time, the whole packet is discarded.
|
|
*/
|
|
#define IP_REASS_MAXAGE 3
|
|
|
|
/**
|
|
* IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
|
|
* Since the received pbufs are enqueued, be sure to configure
|
|
* PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
|
|
* packets even if the maximum amount of fragments is enqueued for reassembly!
|
|
*/
|
|
#define IP_REASS_MAX_PBUFS 10
|
|
|
|
/*
|
|
----------------------------------
|
|
---------- ICMP options ----------
|
|
----------------------------------
|
|
*/
|
|
|
|
#define LWIP_BROADCAST_PING CONFIG_LWIP_BROADCAST_PING
|
|
|
|
#define LWIP_MULTICAST_PING CONFIG_LWIP_MULTICAST_PING
|
|
|
|
/*
|
|
---------------------------------
|
|
---------- RAW options ----------
|
|
---------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
|
|
*/
|
|
#define LWIP_RAW 1
|
|
|
|
/*
|
|
----------------------------------
|
|
---------- DHCP options ----------
|
|
----------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_DHCP==1: Enable DHCP module.
|
|
*/
|
|
#define LWIP_DHCP 1
|
|
|
|
#define DHCP_MAXRTX 0
|
|
|
|
/**
|
|
* DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
|
|
*/
|
|
#define DHCP_DOES_ARP_CHECK CONFIG_LWIP_DHCP_DOES_ARP_CHECK
|
|
|
|
|
|
/**
|
|
* CONFIG_LWIP_DHCP_RESTORE_LAST_IP==1: Last valid IP address obtained from DHCP server
|
|
* is restored after reset/power-up.
|
|
*/
|
|
#if CONFIG_LWIP_DHCP_RESTORE_LAST_IP
|
|
|
|
#define LWIP_DHCP_IP_ADDR_RESTORE() dhcp_ip_addr_restore(netif)
|
|
#define LWIP_DHCP_IP_ADDR_STORE() dhcp_ip_addr_store(netif)
|
|
#define LWIP_DHCP_IP_ADDR_ERASE(esp_netif) dhcp_ip_addr_erase(esp_netif)
|
|
|
|
#endif
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- AUTOIP options ----------
|
|
------------------------------------
|
|
*/
|
|
#ifdef CONFIG_LWIP_AUTOIP
|
|
#define LWIP_AUTOIP 1
|
|
|
|
/**
|
|
* LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
|
|
* the same interface at the same time.
|
|
*/
|
|
#define LWIP_DHCP_AUTOIP_COOP 1
|
|
|
|
/**
|
|
* LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
|
|
* that should be sent before falling back on AUTOIP. This can be set
|
|
* as low as 1 to get an AutoIP address very quickly, but you should
|
|
* be prepared to handle a changing IP address when DHCP overrides
|
|
* AutoIP.
|
|
*/
|
|
#define LWIP_DHCP_AUTOIP_COOP_TRIES CONFIG_LWIP_AUTOIP_TRIES
|
|
|
|
#define LWIP_AUTOIP_MAX_CONFLICTS CONFIG_LWIP_AUTOIP_MAX_CONFLICTS
|
|
|
|
#define LWIP_AUTOIP_RATE_LIMIT_INTERVAL CONFIG_LWIP_AUTOIP_RATE_LIMIT_INTERVAL
|
|
|
|
#endif /* CONFIG_LWIP_AUTOIP */
|
|
|
|
/*
|
|
----------------------------------
|
|
---------- SNMP options ----------
|
|
----------------------------------
|
|
*/
|
|
/*
|
|
----------------------------------
|
|
---------- IGMP options ----------
|
|
----------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_IGMP==1: Turn on IGMP module.
|
|
*/
|
|
#define LWIP_IGMP 1
|
|
|
|
/*
|
|
----------------------------------
|
|
---------- DNS options -----------
|
|
----------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS
|
|
* transport.
|
|
*/
|
|
#define LWIP_DNS 1
|
|
|
|
#define DNS_MAX_SERVERS 3
|
|
#define DNS_FALLBACK_SERVER_INDEX (DNS_MAX_SERVERS - 1)
|
|
|
|
/*
|
|
---------------------------------
|
|
---------- UDP options ----------
|
|
---------------------------------
|
|
*/
|
|
/*
|
|
---------------------------------
|
|
---------- TCP options ----------
|
|
---------------------------------
|
|
*/
|
|
|
|
|
|
/**
|
|
* TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
|
|
* Define to 0 if your device is low on memory.
|
|
*/
|
|
#define TCP_QUEUE_OOSEQ CONFIG_LWIP_TCP_QUEUE_OOSEQ
|
|
|
|
/**
|
|
* LWIP_TCP_SACK_OUT==1: TCP will support sending selective acknowledgements (SACKs).
|
|
*/
|
|
#define LWIP_TCP_SACK_OUT CONFIG_LWIP_TCP_SACK_OUT
|
|
|
|
/**
|
|
* ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES==1: Keep TCP connection when IP changed
|
|
* scenario happens: 192.168.0.2 -> 0.0.0.0 -> 192.168.0.2 or 192.168.0.2 -> 0.0.0.0
|
|
*/
|
|
|
|
#define ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES
|
|
/*
|
|
* LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all
|
|
* events (accept, sent, etc) that happen in the system.
|
|
* LWIP_CALLBACK_API==1: The PCB callback function is called directly
|
|
* for the event. This is the default.
|
|
*/
|
|
#define TCP_MSS CONFIG_LWIP_TCP_MSS
|
|
|
|
/**
|
|
* TCP_TMR_INTERVAL: TCP timer interval
|
|
*/
|
|
#define TCP_TMR_INTERVAL CONFIG_LWIP_TCP_TMR_INTERVAL
|
|
|
|
/**
|
|
* TCP_MSL: The maximum segment lifetime in milliseconds
|
|
*/
|
|
#define TCP_MSL CONFIG_LWIP_TCP_MSL
|
|
|
|
/**
|
|
* TCP_MAXRTX: Maximum number of retransmissions of data segments.
|
|
*/
|
|
#define TCP_MAXRTX CONFIG_LWIP_TCP_MAXRTX
|
|
|
|
/**
|
|
* TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
|
|
*/
|
|
#define TCP_SYNMAXRTX CONFIG_LWIP_TCP_SYNMAXRTX
|
|
|
|
/**
|
|
* TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
|
|
*/
|
|
#define TCP_LISTEN_BACKLOG 1
|
|
|
|
|
|
/**
|
|
* TCP_OVERSIZE: The maximum number of bytes that tcp_write may
|
|
* allocate ahead of time
|
|
*/
|
|
#ifdef CONFIG_LWIP_TCP_OVERSIZE_MSS
|
|
#define TCP_OVERSIZE TCP_MSS
|
|
#endif
|
|
#ifdef CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS
|
|
#define TCP_OVERSIZE (TCP_MSS/4)
|
|
#endif
|
|
#ifdef CONFIG_LWIP_TCP_OVERSIZE_DISABLE
|
|
#define TCP_OVERSIZE 0
|
|
#endif
|
|
#ifndef TCP_OVERSIZE
|
|
#error "One of CONFIG_TCP_OVERSIZE_xxx options should be set by sdkconfig"
|
|
#endif
|
|
|
|
/**
|
|
* LWIP_WND_SCALE and TCP_RCV_SCALE:
|
|
* Set LWIP_WND_SCALE to 1 to enable window scaling.
|
|
* Set TCP_RCV_SCALE to the desired scaling factor (shift count in the
|
|
* range of [0..14]).
|
|
* When LWIP_WND_SCALE is enabled but TCP_RCV_SCALE is 0, we can use a large
|
|
* send window while having a small receive window only.
|
|
*/
|
|
#ifdef CONFIG_LWIP_WND_SCALE
|
|
#define LWIP_WND_SCALE 1
|
|
#define TCP_RCV_SCALE CONFIG_LWIP_TCP_RCV_SCALE
|
|
#endif
|
|
|
|
/*
|
|
----------------------------------
|
|
---------- Pbuf options ----------
|
|
----------------------------------
|
|
*/
|
|
|
|
/*
|
|
------------------------------------------------
|
|
---------- Network Interfaces options ----------
|
|
------------------------------------------------
|
|
*/
|
|
|
|
/**
|
|
* LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname
|
|
* field.
|
|
*/
|
|
#define LWIP_NETIF_HOSTNAME 1
|
|
|
|
/**
|
|
* LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
|
|
* to be sent into one single pbuf. This is for compatibility with DMA-enabled
|
|
* MACs that do not support scatter-gather.
|
|
* Beware that this might involve CPU-memcpy before transmitting that would not
|
|
* be needed without this flag! Use this only if you need to!
|
|
*
|
|
* @todo: TCP and IP-frag do not work with this, yet:
|
|
*/
|
|
#define LWIP_NETIF_TX_SINGLE_PBUF 1
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- LOOPIF options ----------
|
|
------------------------------------
|
|
*/
|
|
#ifdef CONFIG_LWIP_NETIF_LOOPBACK
|
|
/**
|
|
* LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
|
|
* address equal to the netif IP address, looping them back up the stack.
|
|
*/
|
|
#define LWIP_NETIF_LOOPBACK 1
|
|
|
|
/**
|
|
* LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
|
|
* sending for each netif (0 = disabled)
|
|
*/
|
|
#define LWIP_LOOPBACK_MAX_PBUFS CONFIG_LWIP_LOOPBACK_MAX_PBUFS
|
|
#endif
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- SLIPIF options ----------
|
|
------------------------------------
|
|
*/
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- Thread options ----------
|
|
------------------------------------
|
|
*/
|
|
/**
|
|
* TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
|
|
*/
|
|
#define TCPIP_THREAD_NAME "tiT"
|
|
|
|
/**
|
|
* TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
|
|
* The stack size value itself is platform-dependent, but is passed to
|
|
* sys_thread_new() when the thread is created.
|
|
*/
|
|
#define TCPIP_THREAD_STACKSIZE ESP_TASK_TCPIP_STACK
|
|
|
|
/**
|
|
* TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
|
|
* The priority value itself is platform-dependent, but is passed to
|
|
* sys_thread_new() when the thread is created.
|
|
*/
|
|
#define TCPIP_THREAD_PRIO ESP_TASK_TCPIP_PRIO
|
|
|
|
/**
|
|
* TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
|
|
* The queue size value itself is platform-dependent, but is passed to
|
|
* sys_mbox_new() when tcpip_init is called.
|
|
*/
|
|
#define TCPIP_MBOX_SIZE CONFIG_LWIP_TCPIP_RECVMBOX_SIZE
|
|
|
|
/**
|
|
* DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
|
|
* NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
|
|
* to sys_mbox_new() when the recvmbox is created.
|
|
*/
|
|
#define DEFAULT_UDP_RECVMBOX_SIZE CONFIG_LWIP_UDP_RECVMBOX_SIZE
|
|
|
|
/**
|
|
* DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
|
|
* NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
|
|
* to sys_mbox_new() when the recvmbox is created.
|
|
*/
|
|
#define DEFAULT_TCP_RECVMBOX_SIZE CONFIG_LWIP_TCP_RECVMBOX_SIZE
|
|
|
|
/**
|
|
* DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
|
|
* The queue size value itself is platform-dependent, but is passed to
|
|
* sys_mbox_new() when the acceptmbox is created.
|
|
*/
|
|
#define DEFAULT_ACCEPTMBOX_SIZE 6
|
|
|
|
/**
|
|
* DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
|
|
* The stack size value itself is platform-dependent, but is passed to
|
|
* sys_thread_new() when the thread is created.
|
|
*/
|
|
#define DEFAULT_THREAD_STACKSIZE TCPIP_THREAD_STACKSIZE
|
|
|
|
/**
|
|
* DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
|
|
* The priority value itself is platform-dependent, but is passed to
|
|
* sys_thread_new() when the thread is created.
|
|
*/
|
|
#define DEFAULT_THREAD_PRIO TCPIP_THREAD_PRIO
|
|
|
|
/**
|
|
* DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
|
|
* NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
|
|
* to sys_mbox_new() when the recvmbox is created.
|
|
*/
|
|
#define DEFAULT_RAW_RECVMBOX_SIZE 6
|
|
|
|
/*
|
|
----------------------------------------------
|
|
---------- Sequential layer options ----------
|
|
----------------------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
|
|
* Don't use it if you're not an active lwIP project member
|
|
*/
|
|
#define LWIP_TCPIP_CORE_LOCKING 0
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- Socket options ----------
|
|
------------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and
|
|
* SO_SNDTIMEO processing.
|
|
*/
|
|
#define LWIP_SO_SNDTIMEO 1
|
|
|
|
/**
|
|
* LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and
|
|
* SO_RCVTIMEO processing.
|
|
*/
|
|
#define LWIP_SO_RCVTIMEO 1
|
|
|
|
/**
|
|
* LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
|
|
* options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
|
|
* in seconds. (does not require sockets.c, and will affect tcp.c)
|
|
*/
|
|
#define LWIP_TCP_KEEPALIVE 1
|
|
|
|
/**
|
|
* LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
|
|
*/
|
|
#define LWIP_SO_RCVBUF CONFIG_LWIP_SO_RCVBUF
|
|
|
|
/**
|
|
* SO_REUSE==1: Enable SO_REUSEADDR option.
|
|
* This option is set via menuconfig.
|
|
*/
|
|
#define SO_REUSE CONFIG_LWIP_SO_REUSE
|
|
|
|
|
|
/**
|
|
* LWIP_DNS_SUPPORT_MDNS_QUERIES==1: Enable mDNS queries in hostname resolution.
|
|
* This option is set via menuconfig.
|
|
*/
|
|
#define LWIP_DNS_SUPPORT_MDNS_QUERIES CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES
|
|
/**
|
|
* SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets
|
|
* to all local matches if SO_REUSEADDR is turned on.
|
|
* WARNING: Adds a memcpy for every packet if passing to more than one pcb!
|
|
*/
|
|
#define SO_REUSE_RXTOALL CONFIG_LWIP_SO_REUSE_RXTOALL
|
|
|
|
/**
|
|
* LWIP_NETBUF_RECVINFO==1: Enable IP_PKTINFO option.
|
|
* This option is set via menuconfig.
|
|
*/
|
|
#define LWIP_NETBUF_RECVINFO CONFIG_LWIP_NETBUF_RECVINFO
|
|
|
|
/*
|
|
----------------------------------------
|
|
---------- Statistics options ----------
|
|
----------------------------------------
|
|
*/
|
|
|
|
/**
|
|
* LWIP_STATS==1: Enable statistics collection in lwip_stats.
|
|
*/
|
|
#define LWIP_STATS CONFIG_LWIP_STATS
|
|
|
|
#if LWIP_STATS
|
|
|
|
/**
|
|
* LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
|
|
*/
|
|
#define LWIP_STATS_DISPLAY CONFIG_LWIP_STATS
|
|
#endif
|
|
|
|
|
|
/*
|
|
---------------------------------
|
|
---------- PPP options ----------
|
|
---------------------------------
|
|
*/
|
|
|
|
/**
|
|
* PPP_SUPPORT==1: Enable PPP.
|
|
*/
|
|
#define PPP_SUPPORT CONFIG_LWIP_PPP_SUPPORT
|
|
|
|
#if PPP_SUPPORT
|
|
|
|
/**
|
|
* PPP_IPV6_SUPPORT == 1: Enable IPV6 support for local link
|
|
* between modem and lwIP stack.
|
|
* Some modems do not support IPV6 addressing in local link and
|
|
* the only option available is to disable IPV6 address negotiation.
|
|
*/
|
|
#define PPP_IPV6_SUPPORT CONFIG_LWIP_PPP_ENABLE_IPV6
|
|
|
|
/**
|
|
* PPP_NOTIFY_PHASE==1: Support PPP notify phase.
|
|
*/
|
|
#define PPP_NOTIFY_PHASE CONFIG_LWIP_PPP_NOTIFY_PHASE_SUPPORT
|
|
|
|
/**
|
|
* PAP_SUPPORT==1: Support PAP.
|
|
*/
|
|
#define PAP_SUPPORT CONFIG_LWIP_PPP_PAP_SUPPORT
|
|
|
|
/**
|
|
* CHAP_SUPPORT==1: Support CHAP.
|
|
*/
|
|
#define CHAP_SUPPORT CONFIG_LWIP_PPP_CHAP_SUPPORT
|
|
|
|
/**
|
|
* MSCHAP_SUPPORT==1: Support MSCHAP.
|
|
*/
|
|
#define MSCHAP_SUPPORT CONFIG_LWIP_PPP_MSCHAP_SUPPORT
|
|
|
|
/**
|
|
* CCP_SUPPORT==1: Support CCP.
|
|
*/
|
|
#define MPPE_SUPPORT CONFIG_LWIP_PPP_MPPE_SUPPORT
|
|
|
|
/**
|
|
* PPP_MAXIDLEFLAG: Max Xmit idle time (in ms) before resend flag char.
|
|
* TODO: If PPP_MAXIDLEFLAG > 0 and next package is send during PPP_MAXIDLEFLAG time,
|
|
* then 0x7E is not added at the begining of PPP package but 0x7E termination
|
|
* is always at the end. This behaviour brokes PPP dial with GSM (PPPoS).
|
|
* The PPP package should always start and end with 0x7E.
|
|
*/
|
|
|
|
#define PPP_MAXIDLEFLAG 0
|
|
|
|
/**
|
|
* PPP_DEBUG: Enable debugging for PPP.
|
|
*/
|
|
#define PPP_DEBUG_ON CONFIG_LWIP_PPP_DEBUG_ON
|
|
|
|
#if PPP_DEBUG_ON
|
|
#define PPP_DEBUG LWIP_DBG_ON
|
|
#else
|
|
#define PPP_DEBUG LWIP_DBG_OFF
|
|
#endif
|
|
|
|
#endif
|
|
|
|
/*
|
|
--------------------------------------
|
|
---------- Checksum options ----------
|
|
--------------------------------------
|
|
*/
|
|
|
|
/*
|
|
---------------------------------------
|
|
---------- IPv6 options ---------------
|
|
---------------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_IPV6==1: Enable IPv6
|
|
*/
|
|
#define LWIP_IPV6 1
|
|
|
|
/*
|
|
---------------------------------------
|
|
---------- Hook options ---------------
|
|
---------------------------------------
|
|
*/
|
|
#define LWIP_HOOK_IP4_ROUTE_SRC ip4_route_src_hook
|
|
/*
|
|
---------------------------------------
|
|
---------- Debugging options ----------
|
|
---------------------------------------
|
|
*/
|
|
/**
|
|
* ETHARP_DEBUG: Enable debugging in etharp.c.
|
|
*/
|
|
#define ETHARP_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* NETIF_DEBUG: Enable debugging in netif.c.
|
|
*/
|
|
#define NETIF_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* PBUF_DEBUG: Enable debugging in pbuf.c.
|
|
*/
|
|
#define PBUF_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* API_LIB_DEBUG: Enable debugging in api_lib.c.
|
|
*/
|
|
#define API_LIB_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* SOCKETS_DEBUG: Enable debugging in sockets.c.
|
|
*/
|
|
#define SOCKETS_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* ICMP_DEBUG: Enable debugging in icmp.c.
|
|
*/
|
|
#define ICMP_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* IP_DEBUG: Enable debugging for IP.
|
|
*/
|
|
#define IP_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* MEMP_DEBUG: Enable debugging in memp.c.
|
|
*/
|
|
#define MEMP_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
|
|
*/
|
|
#define TCP_INPUT_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
|
|
*/
|
|
#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* TCPIP_DEBUG: Enable debugging in tcpip.c.
|
|
*/
|
|
#define TCPIP_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be
|
|
* updated with the source MAC and IP addresses supplied in the packet.
|
|
* You may want to disable this if you do not trust LAN peers to have the
|
|
* correct addresses, or as a limited approach to attempt to handle
|
|
* spoofing. If disabled, lwIP will need to make a new ARP request if
|
|
* the peer is not already in the ARP table, adding a little latency.
|
|
* The peer *is* in the ARP table if it requested our address before.
|
|
* Also notice that this slows down input processing of every IP packet!
|
|
*/
|
|
#define ETHARP_TRUST_IP_MAC CONFIG_LWIP_ETHARP_TRUST_IP_MAC
|
|
|
|
|
|
/**
|
|
* POSIX I/O functions are mapped to LWIP via the VFS layer
|
|
* (see port/vfs_lwip.c)
|
|
*/
|
|
#define LWIP_POSIX_SOCKETS_IO_NAMES 0
|
|
|
|
/**
|
|
* FD_SETSIZE from sys/types.h is the maximum number of supported file
|
|
* descriptors and CONFIG_LWIP_MAX_SOCKETS defines the number of sockets;
|
|
* LWIP_SOCKET_OFFSET is configured to use the largest numbers of file
|
|
* descriptors for sockets. File descriptors from 0 to LWIP_SOCKET_OFFSET-1
|
|
* are non-socket descriptors and from LWIP_SOCKET_OFFSET to FD_SETSIZE are
|
|
* socket descriptors.
|
|
*/
|
|
#define LWIP_SOCKET_OFFSET (FD_SETSIZE - CONFIG_LWIP_MAX_SOCKETS)
|
|
|
|
/* Enable all Espressif-only options */
|
|
|
|
#define ESP_LWIP 1
|
|
#define ESP_LWIP_ARP 1
|
|
#define ESP_PER_SOC_TCP_WND 0
|
|
#define ESP_THREAD_SAFE 1
|
|
#define ESP_THREAD_SAFE_DEBUG LWIP_DBG_OFF
|
|
#define ESP_DHCP 1
|
|
#define ESP_DNS 1
|
|
#define ESP_PERF 0
|
|
#define ESP_RANDOM_TCP_PORT 1
|
|
#define ESP_IP4_ATON 1
|
|
#define ESP_LIGHT_SLEEP 1
|
|
#define ESP_L2_TO_L3_COPY CONFIG_LWIP_L2_TO_L3_COPY
|
|
#define ESP_STATS_MEM CONFIG_LWIP_STATS
|
|
#define ESP_STATS_DROP CONFIG_LWIP_STATS
|
|
#define ESP_STATS_TCP 0
|
|
#define ESP_DHCPS_TIMER 1
|
|
#define ESP_LWIP_LOGI(...) ESP_LOGI("lwip", __VA_ARGS__)
|
|
#define ESP_PING 1
|
|
#define ESP_HAS_SELECT 1
|
|
#define ESP_AUTO_RECV 1
|
|
#define ESP_GRATUITOUS_ARP CONFIG_LWIP_ESP_GRATUITOUS_ARP
|
|
#define ESP_IP4_ROUTE 1
|
|
#define ESP_AUTO_IP 1
|
|
#define ESP_PBUF 1
|
|
#define ESP_PPP 1
|
|
#define ESP_IPV6 1
|
|
#define ESP_SOCKET 1
|
|
#define ESP_LWIP_SELECT 1
|
|
#define ESP_LWIP_LOCK 1
|
|
|
|
#ifdef CONFIG_LWIP_IPV6_AUTOCONFIG
|
|
#define ESP_IPV6_AUTOCONFIG CONFIG_LWIP_IPV6_AUTOCONFIG
|
|
#endif
|
|
|
|
#ifdef ESP_IRAM_ATTR
|
|
#undef ESP_IRAM_ATTR
|
|
#endif
|
|
#define ESP_IRAM_ATTR
|
|
|
|
#ifdef CONFIG_LWIP_TIMERS_ONDEMAND
|
|
#define ESP_LWIP_IGMP_TIMERS_ONDEMAND 1
|
|
#define ESP_LWIP_MLD6_TIMERS_ONDEMAND 1
|
|
#else
|
|
#define ESP_LWIP_IGMP_TIMERS_ONDEMAND 0
|
|
#define ESP_LWIP_MLD6_TIMERS_ONDEMAND 0
|
|
#endif
|
|
|
|
#define TCP_SND_BUF CONFIG_LWIP_TCP_SND_BUF_DEFAULT
|
|
#define TCP_WND CONFIG_LWIP_TCP_WND_DEFAULT
|
|
|
|
/**
|
|
* DHCP_DEBUG: Enable debugging in dhcp.c.
|
|
*/
|
|
#define DHCP_DEBUG LWIP_DBG_OFF
|
|
#define LWIP_DEBUG LWIP_DBG_OFF
|
|
#define TCP_DEBUG LWIP_DBG_OFF
|
|
|
|
#define CHECKSUM_CHECK_UDP 0
|
|
#define CHECKSUM_CHECK_IP 0
|
|
|
|
#define LWIP_NETCONN_FULLDUPLEX 1
|
|
#define LWIP_NETCONN_SEM_PER_THREAD 1
|
|
|
|
#define LWIP_DHCP_MAX_NTP_SERVERS CONFIG_LWIP_DHCP_MAX_NTP_SERVERS
|
|
#define LWIP_TIMEVAL_PRIVATE 0
|
|
|
|
/*
|
|
--------------------------------------
|
|
------------ SNTP options ------------
|
|
--------------------------------------
|
|
*/
|
|
/*
|
|
* SNTP update delay - in milliseconds
|
|
*/
|
|
/** Set this to 1 to support DNS names (or IP address strings) to set sntp servers
|
|
* One server address/name can be defined as default if SNTP_SERVER_DNS == 1:
|
|
* \#define SNTP_SERVER_ADDRESS "pool.ntp.org"
|
|
*/
|
|
#define SNTP_SERVER_DNS 1
|
|
|
|
// It disables a check of SNTP_UPDATE_DELAY it is done in sntp_set_sync_interval
|
|
#define SNTP_SUPPRESS_DELAY_CHECK
|
|
|
|
#define SNTP_UPDATE_DELAY (sntp_get_sync_interval())
|
|
|
|
#define SNTP_SET_SYSTEM_TIME_US(sec, us) \
|
|
do { \
|
|
struct timeval tv = { .tv_sec = sec, .tv_usec = us }; \
|
|
sntp_sync_time(&tv); \
|
|
} while (0);
|
|
|
|
#define SNTP_GET_SYSTEM_TIME(sec, us) \
|
|
do { \
|
|
struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; \
|
|
gettimeofday(&tv, NULL); \
|
|
(sec) = tv.tv_sec; \
|
|
(us) = tv.tv_usec; \
|
|
sntp_set_sync_status(SNTP_SYNC_STATUS_RESET); \
|
|
} while (0);
|
|
|
|
#define SOC_SEND_LOG //printf
|
|
|
|
#endif /* __LWIPOPTS_H__ */
|