The following commit refactors the CAN driver such that it is split into HAL and Lowlevel layers. The following changes have also been made: - Added bit field members to can_message_t as alternative to message flags. Updated examples and docs accordingly - Register field names and fields of can_dev_t updated
264 lines
9.6 KiB
C
264 lines
9.6 KiB
C
/* CAN Network Slave Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
|
|
/*
|
|
* The following example demonstrates a slave node in a CAN network. The slave
|
|
* node is responsible for sending data messages to the master. The example will
|
|
* execute multiple iterations, with each iteration the slave node will do the
|
|
* following:
|
|
* 1) Start the CAN driver
|
|
* 2) Listen for ping messages from master, and send ping response
|
|
* 3) Listen for start command from master
|
|
* 4) Send data messages to master and listen for stop command
|
|
* 5) Send stop response to master
|
|
* 6) Stop the CAN driver
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/queue.h"
|
|
#include "freertos/semphr.h"
|
|
#include "esp_err.h"
|
|
#include "esp_log.h"
|
|
#include "driver/can.h"
|
|
|
|
/* --------------------- Definitions and static variables ------------------ */
|
|
//Example Configuration
|
|
#define DATA_PERIOD_MS 50
|
|
#define NO_OF_ITERS 3
|
|
#define ITER_DELAY_MS 1000
|
|
#define RX_TASK_PRIO 8 //Receiving task priority
|
|
#define TX_TASK_PRIO 9 //Sending task priority
|
|
#define CTRL_TSK_PRIO 10 //Control task priority
|
|
#define TX_GPIO_NUM 21
|
|
#define RX_GPIO_NUM 22
|
|
#define EXAMPLE_TAG "CAN Slave"
|
|
|
|
#define ID_MASTER_STOP_CMD 0x0A0
|
|
#define ID_MASTER_START_CMD 0x0A1
|
|
#define ID_MASTER_PING 0x0A2
|
|
#define ID_SLAVE_STOP_RESP 0x0B0
|
|
#define ID_SLAVE_DATA 0x0B1
|
|
#define ID_SLAVE_PING_RESP 0x0B2
|
|
|
|
typedef enum {
|
|
TX_SEND_PING_RESP,
|
|
TX_SEND_DATA,
|
|
TX_SEND_STOP_RESP,
|
|
TX_TASK_EXIT,
|
|
} tx_task_action_t;
|
|
|
|
typedef enum {
|
|
RX_RECEIVE_PING,
|
|
RX_RECEIVE_START_CMD,
|
|
RX_RECEIVE_STOP_CMD,
|
|
RX_TASK_EXIT,
|
|
} rx_task_action_t;
|
|
|
|
static const can_general_config_t g_config = CAN_GENERAL_CONFIG_DEFAULT(TX_GPIO_NUM, RX_GPIO_NUM, CAN_MODE_NORMAL);
|
|
static const can_timing_config_t t_config = CAN_TIMING_CONFIG_25KBITS();
|
|
static const can_filter_config_t f_config = CAN_FILTER_CONFIG_ACCEPT_ALL();
|
|
static const can_message_t ping_resp = {.identifier = ID_SLAVE_PING_RESP, .data_length_code = 0,
|
|
.data = {0, 0 , 0 , 0 ,0 ,0 ,0 ,0}};
|
|
static const can_message_t stop_resp = {.identifier = ID_SLAVE_STOP_RESP, .data_length_code = 0,
|
|
.data = {0, 0 , 0 , 0 ,0 ,0 ,0 ,0}};
|
|
//Data bytes of data message will be initialized in the transmit task
|
|
static can_message_t data_message = {.identifier = ID_SLAVE_DATA, .data_length_code = 4,
|
|
.data = {0, 0 , 0 , 0 ,0 ,0 ,0 ,0}};
|
|
|
|
static QueueHandle_t tx_task_queue;
|
|
static QueueHandle_t rx_task_queue;
|
|
static SemaphoreHandle_t ctrl_task_sem;
|
|
static SemaphoreHandle_t stop_data_sem;
|
|
static SemaphoreHandle_t done_sem;
|
|
|
|
/* --------------------------- Tasks and Functions -------------------------- */
|
|
|
|
static void can_receive_task(void *arg)
|
|
{
|
|
while (1) {
|
|
rx_task_action_t action;
|
|
xQueueReceive(rx_task_queue, &action, portMAX_DELAY);
|
|
if (action == RX_RECEIVE_PING) {
|
|
//Listen for pings from master
|
|
can_message_t rx_msg;
|
|
while (1) {
|
|
can_receive(&rx_msg, portMAX_DELAY);
|
|
if (rx_msg.identifier == ID_MASTER_PING) {
|
|
xSemaphoreGive(ctrl_task_sem);
|
|
break;
|
|
}
|
|
}
|
|
} else if (action == RX_RECEIVE_START_CMD) {
|
|
//Listen for start command from master
|
|
can_message_t rx_msg;
|
|
while (1) {
|
|
can_receive(&rx_msg, portMAX_DELAY);
|
|
if (rx_msg.identifier == ID_MASTER_START_CMD) {
|
|
xSemaphoreGive(ctrl_task_sem);
|
|
break;
|
|
}
|
|
}
|
|
} else if (action == RX_RECEIVE_STOP_CMD) {
|
|
//Listen for stop command from master
|
|
can_message_t rx_msg;
|
|
while (1) {
|
|
can_receive(&rx_msg, portMAX_DELAY);
|
|
if (rx_msg.identifier == ID_MASTER_STOP_CMD) {
|
|
xSemaphoreGive(stop_data_sem);
|
|
xSemaphoreGive(ctrl_task_sem);
|
|
break;
|
|
}
|
|
}
|
|
} else if (action == RX_TASK_EXIT) {
|
|
break;
|
|
}
|
|
}
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
static void can_transmit_task(void *arg)
|
|
{
|
|
while (1) {
|
|
tx_task_action_t action;
|
|
xQueueReceive(tx_task_queue, &action, portMAX_DELAY);
|
|
|
|
if (action == TX_SEND_PING_RESP) {
|
|
//Transmit ping response to master
|
|
can_transmit(&ping_resp, portMAX_DELAY);
|
|
ESP_LOGI(EXAMPLE_TAG, "Transmitted ping response");
|
|
xSemaphoreGive(ctrl_task_sem);
|
|
} else if (action == TX_SEND_DATA) {
|
|
//Transmit data messages until stop command is received
|
|
ESP_LOGI(EXAMPLE_TAG, "Start transmitting data");
|
|
while (1) {
|
|
//FreeRTOS tick count used to simulate sensor data
|
|
uint32_t sensor_data = xTaskGetTickCount();
|
|
for (int i = 0; i < 4; i++) {
|
|
data_message.data[i] = (sensor_data >> (i * 8)) & 0xFF;
|
|
}
|
|
can_transmit(&data_message, portMAX_DELAY);
|
|
ESP_LOGI(EXAMPLE_TAG, "Transmitted data value %d", sensor_data);
|
|
vTaskDelay(pdMS_TO_TICKS(DATA_PERIOD_MS));
|
|
if (xSemaphoreTake(stop_data_sem, 0) == pdTRUE) {
|
|
break;
|
|
}
|
|
}
|
|
} else if (action == TX_SEND_STOP_RESP) {
|
|
//Transmit stop response to master
|
|
can_transmit(&stop_resp, portMAX_DELAY);
|
|
ESP_LOGI(EXAMPLE_TAG, "Transmitted stop response");
|
|
xSemaphoreGive(ctrl_task_sem);
|
|
} else if (action == TX_TASK_EXIT) {
|
|
break;
|
|
}
|
|
}
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
static void can_control_task(void *arg)
|
|
{
|
|
xSemaphoreTake(ctrl_task_sem, portMAX_DELAY);
|
|
tx_task_action_t tx_action;
|
|
rx_task_action_t rx_action;
|
|
|
|
for (int iter = 0; iter < NO_OF_ITERS; iter++) {
|
|
ESP_ERROR_CHECK(can_start());
|
|
ESP_LOGI(EXAMPLE_TAG, "Driver started");
|
|
|
|
//Listen of pings from master
|
|
rx_action = RX_RECEIVE_PING;
|
|
xQueueSend(rx_task_queue, &rx_action, portMAX_DELAY);
|
|
xSemaphoreTake(ctrl_task_sem, portMAX_DELAY);
|
|
|
|
//Send ping response
|
|
tx_action = TX_SEND_PING_RESP;
|
|
xQueueSend(tx_task_queue, &tx_action, portMAX_DELAY);
|
|
xSemaphoreTake(ctrl_task_sem, portMAX_DELAY);
|
|
|
|
//Listen for start command
|
|
rx_action = RX_RECEIVE_START_CMD;
|
|
xQueueSend(rx_task_queue, &rx_action, portMAX_DELAY);
|
|
xSemaphoreTake(ctrl_task_sem, portMAX_DELAY);
|
|
|
|
//Start sending data messages and listen for stop command
|
|
tx_action = TX_SEND_DATA;
|
|
rx_action = RX_RECEIVE_STOP_CMD;
|
|
xQueueSend(tx_task_queue, &tx_action, portMAX_DELAY);
|
|
xQueueSend(rx_task_queue, &rx_action, portMAX_DELAY);
|
|
xSemaphoreTake(ctrl_task_sem, portMAX_DELAY);
|
|
|
|
//Send stop response
|
|
tx_action = TX_SEND_STOP_RESP;
|
|
xQueueSend(tx_task_queue, &tx_action, portMAX_DELAY);
|
|
xSemaphoreTake(ctrl_task_sem, portMAX_DELAY);
|
|
|
|
//Wait for bus to become free
|
|
can_status_info_t status_info;
|
|
can_get_status_info(&status_info);
|
|
while (status_info.msgs_to_tx > 0) {
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
can_get_status_info(&status_info);
|
|
}
|
|
|
|
ESP_ERROR_CHECK(can_stop());
|
|
ESP_LOGI(EXAMPLE_TAG, "Driver stopped");
|
|
vTaskDelay(pdMS_TO_TICKS(ITER_DELAY_MS));
|
|
}
|
|
|
|
//Stop TX and RX tasks
|
|
tx_action = TX_TASK_EXIT;
|
|
rx_action = RX_TASK_EXIT;
|
|
xQueueSend(tx_task_queue, &tx_action, portMAX_DELAY);
|
|
xQueueSend(rx_task_queue, &rx_action, portMAX_DELAY);
|
|
|
|
//Delete Control task
|
|
xSemaphoreGive(done_sem);
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
void app_main(void)
|
|
{
|
|
//Add short delay to allow master it to initialize first
|
|
for (int i = 3; i > 0; i--) {
|
|
printf("Slave starting in %d\n", i);
|
|
vTaskDelay(pdMS_TO_TICKS(1000));
|
|
}
|
|
|
|
|
|
//Create semaphores and tasks
|
|
tx_task_queue = xQueueCreate(1, sizeof(tx_task_action_t));
|
|
rx_task_queue = xQueueCreate(1, sizeof(rx_task_action_t));
|
|
ctrl_task_sem = xSemaphoreCreateBinary();
|
|
stop_data_sem = xSemaphoreCreateBinary();;
|
|
done_sem = xSemaphoreCreateBinary();;
|
|
xTaskCreatePinnedToCore(can_receive_task, "CAN_rx", 4096, NULL, RX_TASK_PRIO, NULL, tskNO_AFFINITY);
|
|
xTaskCreatePinnedToCore(can_transmit_task, "CAN_tx", 4096, NULL, TX_TASK_PRIO, NULL, tskNO_AFFINITY);
|
|
xTaskCreatePinnedToCore(can_control_task, "CAN_ctrl", 4096, NULL, CTRL_TSK_PRIO, NULL, tskNO_AFFINITY);
|
|
|
|
//Install CAN driver, trigger tasks to start
|
|
ESP_ERROR_CHECK(can_driver_install(&g_config, &t_config, &f_config));
|
|
ESP_LOGI(EXAMPLE_TAG, "Driver installed");
|
|
|
|
xSemaphoreGive(ctrl_task_sem); //Start Control task
|
|
xSemaphoreTake(done_sem, portMAX_DELAY); //Wait for tasks to complete
|
|
|
|
//Uninstall CAN driver
|
|
ESP_ERROR_CHECK(can_driver_uninstall());
|
|
ESP_LOGI(EXAMPLE_TAG, "Driver uninstalled");
|
|
|
|
//Cleanup
|
|
vSemaphoreDelete(ctrl_task_sem);
|
|
vSemaphoreDelete(stop_data_sem);
|
|
vSemaphoreDelete(done_sem);
|
|
vQueueDelete(tx_task_queue);
|
|
vQueueDelete(rx_task_queue);
|
|
}
|