OVMS3-idf/examples/wifi/scan
Sagar Bijwe a3b5a23b87 nvs_flash: Version compatibility check for nvs storage
This change adds a check for compatibility between the nvs version
found on nvs flash and the one assumed by running code during nvs
initialization. Any mismatch is reported to the user using new error
code ESP_ERR_NVS_NEW_VERSION_FOUND.
2018-08-08 12:43:50 +05:30
..
main nvs_flash: Version compatibility check for nvs storage 2018-08-08 12:43:50 +05:30
Makefile wifi: optimize scan feature 2017-10-10 12:27:02 +08:00
README.md wifi: optimize scan feature 2017-10-10 12:27:02 +08:00

Wifi SCAN Example

This example shows how to use scan of ESP32.

We have two way to scan, fast scan and all channel scan:

  • fast scan: in this mode, scan will finish after find match AP even didn't scan all the channel, you can set thresholds for signal and authmode, it will ignore the AP which below the thresholds.

  • all channel scan : scan will end after checked all the channel, it will store four of the whole matched AP, you can set the sort method base on rssi or authmode, after scan, it will choose the best one

and try to connect. Because it need malloc dynamic memory to store match AP, and most of cases is to connect to better signal AP, so it needn't record all the AP matched. The number of matches is limited to 4 in order to limit dynamic memory usage. Four matches allows APs with the same SSID name and all possible auth modes - Open, WEP, WPA and WPA2.