OVMS3-idf/components/driver/include/driver/adc.h

408 lines
15 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _DRIVER_ADC_H_
#define _DRIVER_ADC_H_
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "driver/gpio.h"
#include "soc/adc_channel.h"
typedef enum {
ADC_ATTEN_DB_0 = 0, /*!<The input voltage of ADC will be reduced to about 1/1 */
ADC_ATTEN_DB_2_5 = 1, /*!<The input voltage of ADC will be reduced to about 1/1.34 */
ADC_ATTEN_DB_6 = 2, /*!<The input voltage of ADC will be reduced to about 1/2 */
ADC_ATTEN_DB_11 = 3, /*!<The input voltage of ADC will be reduced to about 1/3.6*/
ADC_ATTEN_MAX,
} adc_atten_t;
typedef enum {
ADC_WIDTH_BIT_9 = 0, /*!< ADC capture width is 9Bit*/
ADC_WIDTH_BIT_10 = 1, /*!< ADC capture width is 10Bit*/
ADC_WIDTH_BIT_11 = 2, /*!< ADC capture width is 11Bit*/
ADC_WIDTH_BIT_12 = 3, /*!< ADC capture width is 12Bit*/
ADC_WIDTH_MAX,
} adc_bits_width_t;
//this definitions are only for being back-compatible
#define ADC_ATTEN_0db ADC_ATTEN_DB_0
#define ADC_ATTEN_2_5db ADC_ATTEN_DB_2_5
#define ADC_ATTEN_6db ADC_ATTEN_DB_6
#define ADC_ATTEN_11db ADC_ATTEN_DB_11
//this definitions are only for being back-compatible
#define ADC_WIDTH_9Bit ADC_WIDTH_BIT_9
#define ADC_WIDTH_10Bit ADC_WIDTH_BIT_10
#define ADC_WIDTH_11Bit ADC_WIDTH_BIT_11
#define ADC_WIDTH_12Bit ADC_WIDTH_BIT_12
typedef enum {
ADC1_CHANNEL_0 = 0, /*!< ADC1 channel 0 is GPIO36 */
ADC1_CHANNEL_1, /*!< ADC1 channel 1 is GPIO37 */
ADC1_CHANNEL_2, /*!< ADC1 channel 2 is GPIO38 */
ADC1_CHANNEL_3, /*!< ADC1 channel 3 is GPIO39 */
ADC1_CHANNEL_4, /*!< ADC1 channel 4 is GPIO32 */
ADC1_CHANNEL_5, /*!< ADC1 channel 5 is GPIO33 */
ADC1_CHANNEL_6, /*!< ADC1 channel 6 is GPIO34 */
ADC1_CHANNEL_7, /*!< ADC1 channel 7 is GPIO35 */
ADC1_CHANNEL_MAX,
} adc1_channel_t;
typedef enum {
ADC2_CHANNEL_0 = 0, /*!< ADC2 channel 0 is GPIO4 */
ADC2_CHANNEL_1, /*!< ADC2 channel 1 is GPIO0 */
ADC2_CHANNEL_2, /*!< ADC2 channel 2 is GPIO2 */
ADC2_CHANNEL_3, /*!< ADC2 channel 3 is GPIO15 */
ADC2_CHANNEL_4, /*!< ADC2 channel 4 is GPIO13 */
ADC2_CHANNEL_5, /*!< ADC2 channel 5 is GPIO12 */
ADC2_CHANNEL_6, /*!< ADC2 channel 6 is GPIO14 */
ADC2_CHANNEL_7, /*!< ADC2 channel 7 is GPIO27 */
ADC2_CHANNEL_8, /*!< ADC2 channel 8 is GPIO25 */
ADC2_CHANNEL_9, /*!< ADC2 channel 9 is GPIO26 */
ADC2_CHANNEL_MAX,
} adc2_channel_t;
typedef enum {
ADC_CHANNEL_0 = 0, /*!< ADC channel */
ADC_CHANNEL_1, /*!< ADC channel */
ADC_CHANNEL_2, /*!< ADC channel */
ADC_CHANNEL_3, /*!< ADC channel */
ADC_CHANNEL_4, /*!< ADC channel */
ADC_CHANNEL_5, /*!< ADC channel */
ADC_CHANNEL_6, /*!< ADC channel */
ADC_CHANNEL_7, /*!< ADC channel */
ADC_CHANNEL_8, /*!< ADC channel */
ADC_CHANNEL_9, /*!< ADC channel */
ADC_CHANNEL_MAX,
} adc_channel_t;
typedef enum {
ADC_UNIT_1 = 1, /*!< SAR ADC 1*/
ADC_UNIT_2 = 2, /*!< SAR ADC 2, not supported yet*/
ADC_UNIT_BOTH = 3, /*!< SAR ADC 1 and 2, not supported yet */
ADC_UNIT_ALTER = 7, /*!< SAR ADC 1 and 2 alternative mode, not supported yet */
ADC_UNIT_MAX,
} adc_unit_t;
typedef enum {
ADC_ENCODE_12BIT, /*!< ADC to I2S data format, [15:12]-channel [11:0]-12 bits ADC data */
ADC_ENCODE_11BIT, /*!< ADC to I2S data format, [15]-1 [14:11]-channel [10:0]-11 bits ADC data */
ADC_ENCODE_MAX,
} adc_i2s_encode_t;
typedef enum {
ADC_I2S_DATA_SRC_IO_SIG = 0, /*!< I2S data from GPIO matrix signal */
ADC_I2S_DATA_SRC_ADC = 1, /*!< I2S data from ADC */
ADC_I2S_DATA_SRC_MAX,
} adc_i2s_source_t;
/**
* @brief Get the gpio number of a specific ADC1 channel.
*
* @param channel Channel to get the gpio number
*
* @param gpio_num output buffer to hold the gpio number
*
* @return
* - ESP_OK if success
* - ESP_ERR_INVALID_ARG if channal not valid
*/
esp_err_t adc1_pad_get_io_num(adc1_channel_t channel, gpio_num_t *gpio_num);
/**
* @brief Configure ADC1 capture width, meanwhile enable output invert for ADC1.
* The configuration is for all channels of ADC1
* @param width_bit Bit capture width for ADC1
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc1_config_width(adc_bits_width_t width_bit);
/**
* @brief Configure ADC capture width.
* @param adc_unit ADC unit index
* @param width_bit Bit capture width for ADC unit.
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_set_data_width(adc_unit_t adc_unit, adc_bits_width_t width_bit);
/**
* @brief Set the attenuation of a particular channel on ADC1, and configure its
* associated GPIO pin mux.
*
* @note For any given channel, this function must be called before the first time
* adc1_get_raw() is called for that channel.
*
* @note This function can be called multiple times to configure multiple
* ADC channels simultaneously. adc1_get_raw() can then be called for any configured
* channel.
*
* The default ADC full-scale voltage is 1.1V. To read higher voltages (up to the pin maximum voltage,
* usually 3.3V) requires setting >0dB signal attenuation for that ADC channel.
*
* When VDD_A is 3.3V:
*
* - 0dB attenuaton (ADC_ATTEN_DB_0) gives full-scale voltage 1.1V
* - 2.5dB attenuation (ADC_ATTEN_DB_2_5) gives full-scale voltage 1.5V
* - 6dB attenuation (ADC_ATTEN_DB_6) gives full-scale voltage 2.2V
* - 11dB attenuation (ADC_ATTEN_DB_11) gives full-scale voltage 3.9V (see note below)
*
* @note The full-scale voltage is the voltage corresponding to a maximum reading (depending on ADC1 configured
* bit width, this value is: 4095 for 12-bits, 2047 for 11-bits, 1023 for 10-bits, 511 for 9 bits.)
*
* @note At 11dB attenuation the maximum voltage is limited by VDD_A, not the full scale voltage.
*
* Due to ADC characteristics, most accurate results are obtained within the following approximate voltage ranges:
*
* - 0dB attenuaton (ADC_ATTEN_DB_0) between 100 and 950mV
* - 2.5dB attenuation (ADC_ATTEN_DB_2_5) between 100 and 1250mV
* - 6dB attenuation (ADC_ATTEN_DB_6) between 150 to 1750mV
* - 11dB attenuation (ADC_ATTEN_DB_11) between 150 to 2450mV
*
* For maximum accuracy, use the ADC calibration APIs and measure voltages within these recommended ranges.
*
* @param channel ADC1 channel to configure
* @param atten Attenuation level
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc1_config_channel_atten(adc1_channel_t channel, adc_atten_t atten);
/**
* @brief Take an ADC1 reading from a single channel.
* @note When the power switch of SARADC1, SARADC2, HALL sensor and AMP sensor is turned on,
* the input of GPIO36 and GPIO39 will be pulled down for about 80ns.
* When enabling power for any of these peripherals, ignore input from GPIO36 and GPIO39.
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
*
* @note Call adc1_config_width() before the first time this
* function is called.
*
* @note For any given channel, adc1_config_channel_atten(channel)
* must be called before the first time this function is called. Configuring
* a new channel does not prevent a previously configured channel from being read.
*
* @param channel ADC1 channel to read
*
* @return
* - -1: Parameter error
* - Other: ADC1 channel reading.
*/
int adc1_get_raw(adc1_channel_t channel);
/** @cond */ //Doxygen command to hide deprecated function from API Reference
/*
* @note When the power switch of SARADC1, SARADC2, HALL sensor and AMP sensor is turned on,
* the input of GPIO36 and GPIO39 will be pulled down for about 80ns.
* When enabling power for any of these peripherals, ignore input from GPIO36 and GPIO39.
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
*
* @deprecated This function returns an ADC1 reading but is deprecated due to
* a misleading name and has been changed to directly call the new function.
* Use the new function adc1_get_raw() instead
*/
int adc1_get_voltage(adc1_channel_t channel) __attribute__((deprecated));
/** @endcond */
/**
* @brief Enable ADC power
*/
void adc_power_on();
/**
* @brief Power off SAR ADC
* This function will force power down for ADC
*/
void adc_power_off();
/**
* @brief Initialize ADC pad
* @param adc_unit ADC unit index
* @param channel ADC channel index
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_gpio_init(adc_unit_t adc_unit, adc_channel_t channel);
/**
* @brief Set ADC data invert
* @param adc_unit ADC unit index
* @param inv_en whether enable data invert
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_set_data_inv(adc_unit_t adc_unit, bool inv_en);
/**
* @brief Set ADC source clock
* @param clk_div ADC clock divider, ADC clock is divided from APB clock
* @return
* - ESP_OK success
*/
esp_err_t adc_set_clk_div(uint8_t clk_div);
/**
* @brief Set I2S data source
* @param src I2S DMA data source, I2S DMA can get data from digital signals or from ADC.
* @return
* - ESP_OK success
*/
esp_err_t adc_set_i2s_data_source(adc_i2s_source_t src);
/**
* @brief Initialize I2S ADC mode
* @param adc_unit ADC unit index
* @param channel ADC channel index
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc_i2s_mode_init(adc_unit_t adc_unit, adc_channel_t channel);
/**
* @brief Configure ADC1 to be usable by the ULP
*
* This function reconfigures ADC1 to be controlled by the ULP.
* Effect of this function can be reverted using adc1_get_raw function.
*
* Note that adc1_config_channel_atten, adc1_config_width functions need
* to be called to configure ADC1 channels, before ADC1 is used by the ULP.
*/
void adc1_ulp_enable();
/**
* @brief Read Hall Sensor
*
* @note When the power switch of SARADC1, SARADC2, HALL sensor and AMP sensor is turned on,
* the input of GPIO36 and GPIO39 will be pulled down for about 80ns.
* When enabling power for any of these peripherals, ignore input from GPIO36 and GPIO39.
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
*
* @note The Hall Sensor uses channels 0 and 3 of ADC1. Do not configure
* these channels for use as ADC channels.
*
* @note The ADC1 module must be enabled by calling
* adc1_config_width() before calling hall_sensor_read(). ADC1
* should be configured for 12 bit readings, as the hall sensor
* readings are low values and do not cover the full range of the
* ADC.
*
* @return The hall sensor reading.
*/
int hall_sensor_read();
/**
* @brief Get the gpio number of a specific ADC2 channel.
*
* @param channel Channel to get the gpio number
*
* @param gpio_num output buffer to hold the gpio number
*
* @return
* - ESP_OK if success
* - ESP_ERR_INVALID_ARG if channal not valid
*/
esp_err_t adc2_pad_get_io_num(adc2_channel_t channel, gpio_num_t *gpio_num);
/**
* @brief Configure the ADC2 channel, including setting attenuation.
*
* @note This function also configures the input GPIO pin mux to
* connect it to the ADC2 channel. It must be called before calling
* ``adc2_get_raw()`` for this channel.
*
* The default ADC full-scale voltage is 1.1V. To read higher voltages (up to the pin maximum voltage,
* usually 3.3V) requires setting >0dB signal attenuation for that ADC channel.
*
* When VDD_A is 3.3V:
*
* - 0dB attenuaton (ADC_ATTEN_0db) gives full-scale voltage 1.1V
* - 2.5dB attenuation (ADC_ATTEN_2_5db) gives full-scale voltage 1.5V
* - 6dB attenuation (ADC_ATTEN_6db) gives full-scale voltage 2.2V
* - 11dB attenuation (ADC_ATTEN_11db) gives full-scale voltage 3.9V (see note below)
*
* @note The full-scale voltage is the voltage corresponding to a maximum reading
* (depending on ADC2 configured bit width, this value is: 4095 for 12-bits, 2047
* for 11-bits, 1023 for 10-bits, 511 for 9 bits.)
*
* @note At 11dB attenuation the maximum voltage is limited by VDD_A, not the full scale voltage.
*
* @param channel ADC2 channel to configure
* @param atten Attenuation level
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t adc2_config_channel_atten(adc2_channel_t channel, adc_atten_t atten);
/**
* @brief Take an ADC2 reading on a single channel
*
* @note When the power switch of SARADC1, SARADC2, HALL sensor and AMP sensor is turned on,
* the input of GPIO36 and GPIO39 will be pulled down for about 80ns.
* When enabling power for any of these peripherals, ignore input from GPIO36 and GPIO39.
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
*
* @note For a given channel, ``adc2_config_channel_atten()``
* must be called before the first time this function is called. If Wi-Fi is started via ``esp_wifi_start()``, this
* function will always fail with ``ESP_ERR_TIMEOUT``.
*
* @param channel ADC2 channel to read
*
* @param width_bit Bit capture width for ADC2
*
* @param raw_out the variable to hold the output data.
*
* @return
* - ESP_OK if success
* - ESP_ERR_TIMEOUT the WIFI is started, using the ADC2
*/
esp_err_t adc2_get_raw(adc2_channel_t channel, adc_bits_width_t width_bit, int* raw_out);
/**
* @brief Output ADC2 reference voltage to gpio 25 or 26 or 27
*
* This function utilizes the testing mux exclusive to ADC 2 to route the
* reference voltage one of ADC2's channels. Supported gpios are gpios
* 25, 26, and 27. This refernce voltage can be manually read from the pin
* and used in the esp_adc_cal component.
*
* @param[in] gpio GPIO number (gpios 25,26,27 supported)
*
* @return
* - ESP_OK: v_ref successfully routed to selected gpio
* - ESP_ERR_INVALID_ARG: Unsupported gpio
*/
esp_err_t adc2_vref_to_gpio(gpio_num_t gpio);
#ifdef __cplusplus
}
#endif
#endif /*_DRIVER_ADC_H_*/