309 lines
11 KiB
C
309 lines
11 KiB
C
// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#include <stdint.h>
|
|
#include <sys/cdefs.h>
|
|
#include <sys/time.h>
|
|
#include <sys/param.h>
|
|
#include "sdkconfig.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_log.h"
|
|
#include "esp32s2beta/clk.h"
|
|
#include "esp_clk_internal.h"
|
|
#include "esp32s2beta/rom/ets_sys.h"
|
|
#include "esp32s2beta/rom/uart.h"
|
|
#include "esp32s2beta/rom/rtc.h"
|
|
#include "soc/system_reg.h"
|
|
#include "soc/dport_access.h"
|
|
#include "soc/soc.h"
|
|
#include "soc/rtc.h"
|
|
#include "soc/rtc_cntl_reg.h"
|
|
#include "soc/i2s_reg.h"
|
|
#include "driver/periph_ctrl.h"
|
|
#include "xtensa/core-macros.h"
|
|
#include "bootloader_clock.h"
|
|
#include "soc/syscon_reg.h"
|
|
|
|
/* Number of cycles to wait from the 32k XTAL oscillator to consider it running.
|
|
* Larger values increase startup delay. Smaller values may cause false positive
|
|
* detection (i.e. oscillator runs for a few cycles and then stops).
|
|
*/
|
|
#define SLOW_CLK_CAL_CYCLES CONFIG_ESP32_RTC_CLK_CAL_CYCLES
|
|
|
|
#define MHZ (1000000)
|
|
|
|
static void select_rtc_slow_clk(rtc_slow_freq_t slow_clk);
|
|
|
|
// g_ticks_us defined in ROMs for PRO and APP CPU
|
|
extern uint32_t g_ticks_per_us_pro;
|
|
#if !CONFIG_FREERTOS_UNICORE
|
|
extern uint32_t g_ticks_per_us_app;
|
|
#endif //!CONFIG_FREERTOS_UNICORE
|
|
|
|
static const char* TAG = "clk";
|
|
|
|
|
|
void esp_clk_init(void)
|
|
{
|
|
rtc_config_t cfg = RTC_CONFIG_DEFAULT();
|
|
rtc_init(cfg);
|
|
|
|
#ifdef CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS
|
|
/* Check the bootloader set the XTAL frequency.
|
|
|
|
Bootloaders pre-v2.1 don't do this.
|
|
*/
|
|
rtc_xtal_freq_t xtal_freq = rtc_clk_xtal_freq_get();
|
|
if (xtal_freq == RTC_XTAL_FREQ_AUTO) {
|
|
ESP_EARLY_LOGW(TAG, "RTC domain not initialised by bootloader");
|
|
bootloader_clock_configure();
|
|
}
|
|
#else
|
|
/* If this assertion fails, either upgrade the bootloader or enable CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS */
|
|
assert(rtc_clk_xtal_freq_get() != RTC_XTAL_FREQ_AUTO);
|
|
#endif
|
|
|
|
rtc_clk_fast_freq_set(RTC_FAST_FREQ_8M);
|
|
|
|
#ifdef CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL
|
|
select_rtc_slow_clk(RTC_SLOW_FREQ_32K_XTAL);
|
|
#else
|
|
select_rtc_slow_clk(RTC_SLOW_FREQ_RTC);
|
|
#endif
|
|
|
|
uint32_t freq_mhz = CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ;
|
|
rtc_cpu_freq_t freq = RTC_CPU_FREQ_80M;
|
|
switch(freq_mhz) {
|
|
case 240:
|
|
freq = RTC_CPU_FREQ_240M;
|
|
break;
|
|
case 160:
|
|
freq = RTC_CPU_FREQ_160M;
|
|
break;
|
|
default:
|
|
freq_mhz = 80;
|
|
/* no break */
|
|
case 80:
|
|
freq = RTC_CPU_FREQ_80M;
|
|
break;
|
|
}
|
|
|
|
// Wait for UART TX to finish, otherwise some UART output will be lost
|
|
// when switching APB frequency
|
|
uart_tx_wait_idle(CONFIG_CONSOLE_UART_NUM);
|
|
|
|
uint32_t freq_before = rtc_clk_cpu_freq_value(rtc_clk_cpu_freq_get()) / MHZ ;
|
|
|
|
rtc_clk_cpu_freq_set(freq);
|
|
|
|
// Re calculate the ccount to make time calculation correct.
|
|
uint32_t freq_after = CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ;
|
|
XTHAL_SET_CCOUNT( XTHAL_GET_CCOUNT() * freq_after / freq_before );
|
|
}
|
|
|
|
int IRAM_ATTR esp_clk_cpu_freq(void)
|
|
{
|
|
return g_ticks_per_us_pro * 1000000;
|
|
}
|
|
|
|
int IRAM_ATTR esp_clk_apb_freq(void)
|
|
{
|
|
return MIN(g_ticks_per_us_pro, 80) * 1000000;
|
|
}
|
|
|
|
void IRAM_ATTR ets_update_cpu_frequency(uint32_t ticks_per_us)
|
|
{
|
|
/* Update scale factors used by ets_delay_us */
|
|
g_ticks_per_us_pro = ticks_per_us;
|
|
#if !CONFIG_FREERTOS_UNICORE
|
|
g_ticks_per_us_app = ticks_per_us;
|
|
#endif //!CONFIG_FREERTOS_UNICORE
|
|
}
|
|
|
|
static void select_rtc_slow_clk(rtc_slow_freq_t slow_clk)
|
|
{
|
|
uint32_t cal_val = 0;
|
|
uint32_t wait = 0;
|
|
const uint32_t warning_timeout = 3 /* sec */ * 32768 /* Hz */ / (2 * SLOW_CLK_CAL_CYCLES);
|
|
bool changing_clock_to_150k = false;
|
|
do {
|
|
if (slow_clk == RTC_SLOW_FREQ_32K_XTAL) {
|
|
/* 32k XTAL oscillator needs to be enabled and running before it can
|
|
* be used. Hardware doesn't have a direct way of checking if the
|
|
* oscillator is running. Here we use rtc_clk_cal function to count
|
|
* the number of main XTAL cycles in the given number of 32k XTAL
|
|
* oscillator cycles. If the 32k XTAL has not started up, calibration
|
|
* will time out, returning 0.
|
|
*/
|
|
ESP_EARLY_LOGD(TAG, "waiting for 32k oscillator to start up");
|
|
rtc_clk_32k_enable(true);
|
|
cal_val = rtc_clk_cal(RTC_CAL_32K_XTAL, SLOW_CLK_CAL_CYCLES);
|
|
if(cal_val == 0 || cal_val < 15000000L){
|
|
ESP_EARLY_LOGE(TAG, "RTC: Not found External 32 kHz XTAL. Switching to Internal 150 kHz RC chain");
|
|
slow_clk = RTC_SLOW_FREQ_RTC;
|
|
changing_clock_to_150k = true;
|
|
}
|
|
}
|
|
rtc_clk_slow_freq_set(slow_clk);
|
|
if (changing_clock_to_150k == true && wait > 1){
|
|
// This helps when there are errors when switching the clock from External 32 kHz XTAL to Internal 150 kHz RC chain.
|
|
rtc_clk_32k_enable(false);
|
|
uint32_t min_bootstrap = 5; // Min bootstrapping for continue switching the clock.
|
|
rtc_clk_32k_bootstrap(min_bootstrap);
|
|
rtc_clk_32k_enable(true);
|
|
}
|
|
|
|
if (SLOW_CLK_CAL_CYCLES > 0) {
|
|
/* TODO: 32k XTAL oscillator has some frequency drift at startup.
|
|
* Improve calibration routine to wait until the frequency is stable.
|
|
*/
|
|
cal_val = rtc_clk_cal(RTC_CAL_RTC_MUX, SLOW_CLK_CAL_CYCLES);
|
|
} else {
|
|
const uint64_t cal_dividend = (1ULL << RTC_CLK_CAL_FRACT) * 1000000ULL;
|
|
cal_val = (uint32_t) (cal_dividend / rtc_clk_slow_freq_get_hz());
|
|
}
|
|
if (++wait % warning_timeout == 0) {
|
|
ESP_EARLY_LOGW(TAG, "still waiting for source selection RTC");
|
|
}
|
|
} while (cal_val == 0);
|
|
ESP_EARLY_LOGD(TAG, "RTC_SLOW_CLK calibration value: %d", cal_val);
|
|
esp_clk_slowclk_cal_set(cal_val);
|
|
}
|
|
|
|
void rtc_clk_select_rtc_slow_clk()
|
|
{
|
|
select_rtc_slow_clk(RTC_SLOW_FREQ_32K_XTAL);
|
|
}
|
|
|
|
/* This function is not exposed as an API at this point.
|
|
* All peripheral clocks are default enabled after chip is powered on.
|
|
* This function disables some peripheral clocks when cpu starts.
|
|
* These peripheral clocks are enabled when the peripherals are initialized
|
|
* and disabled when they are de-initialized.
|
|
*/
|
|
void esp_perip_clk_init(void)
|
|
{
|
|
uint32_t common_perip_clk, hwcrypto_perip_clk, wifi_bt_sdio_clk = 0;
|
|
uint32_t common_perip_clk1 = 0;
|
|
|
|
#if CONFIG_FREERTOS_UNICORE
|
|
RESET_REASON rst_reas[1];
|
|
#else
|
|
RESET_REASON rst_reas[2];
|
|
#endif
|
|
|
|
rst_reas[0] = rtc_get_reset_reason(0);
|
|
|
|
#if !CONFIG_FREERTOS_UNICORE
|
|
rst_reas[1] = rtc_get_reset_reason(1);
|
|
#endif
|
|
|
|
/* For reason that only reset CPU, do not disable the clocks
|
|
* that have been enabled before reset.
|
|
*/
|
|
if ((rst_reas[0] >= TG0WDT_CPU_RESET && rst_reas[0] <= TG0WDT_CPU_RESET && rst_reas[0] != RTCWDT_BROWN_OUT_RESET)
|
|
#if !CONFIG_FREERTOS_UNICORE
|
|
|| (rst_reas[1] >= TGWDT_CPU_RESET && rst_reas[1] <= RTCWDT_CPU_RESET)
|
|
#endif
|
|
) {
|
|
common_perip_clk = ~DPORT_READ_PERI_REG(DPORT_PERIP_CLK_EN_REG);
|
|
hwcrypto_perip_clk = ~DPORT_READ_PERI_REG(DPORT_PERI_CLK_EN_REG);
|
|
wifi_bt_sdio_clk = ~DPORT_READ_PERI_REG(DPORT_WIFI_CLK_EN_REG);
|
|
}
|
|
else {
|
|
common_perip_clk = DPORT_WDG_CLK_EN |
|
|
DPORT_I2S0_CLK_EN |
|
|
#if CONFIG_CONSOLE_UART_NUM != 0
|
|
DPORT_UART_CLK_EN |
|
|
#endif
|
|
#if CONFIG_CONSOLE_UART_NUM != 1
|
|
DPORT_UART1_CLK_EN |
|
|
#endif
|
|
DPORT_USB_CLK_EN |
|
|
DPORT_SPI2_CLK_EN |
|
|
DPORT_I2C_EXT0_CLK_EN |
|
|
DPORT_UHCI0_CLK_EN |
|
|
DPORT_RMT_CLK_EN |
|
|
DPORT_PCNT_CLK_EN |
|
|
DPORT_LEDC_CLK_EN |
|
|
DPORT_TIMERGROUP1_CLK_EN |
|
|
DPORT_SPI3_CLK_EN |
|
|
DPORT_SPI4_CLK_EN |
|
|
DPORT_PWM0_CLK_EN |
|
|
DPORT_CAN_CLK_EN |
|
|
DPORT_PWM1_CLK_EN |
|
|
DPORT_I2S1_CLK_EN |
|
|
DPORT_SPI2_DMA_CLK_EN |
|
|
DPORT_SPI3_DMA_CLK_EN |
|
|
DPORT_PWM2_CLK_EN |
|
|
DPORT_PWM3_CLK_EN;
|
|
common_perip_clk1 = DPORT_SPI_SHARED_DMA_CLK_EN;
|
|
hwcrypto_perip_clk = DPORT_PERI_EN_AES |
|
|
DPORT_PERI_EN_SHA |
|
|
DPORT_PERI_EN_RSA |
|
|
DPORT_PERI_EN_SECUREBOOT;
|
|
wifi_bt_sdio_clk = DPORT_WIFI_CLK_WIFI_EN |
|
|
DPORT_WIFI_CLK_BT_EN_M |
|
|
DPORT_WIFI_CLK_UNUSED_BIT5 |
|
|
DPORT_WIFI_CLK_UNUSED_BIT12 |
|
|
DPORT_WIFI_CLK_SDIOSLAVE_EN |
|
|
DPORT_WIFI_CLK_SDIO_HOST_EN |
|
|
DPORT_WIFI_CLK_EMAC_EN;
|
|
}
|
|
|
|
//Reset the communication peripherals like I2C, SPI, UART, I2S and bring them to known state.
|
|
common_perip_clk |= DPORT_I2S0_CLK_EN |
|
|
#if CONFIG_CONSOLE_UART_NUM != 0
|
|
DPORT_UART_CLK_EN |
|
|
#endif
|
|
#if CONFIG_CONSOLE_UART_NUM != 1
|
|
DPORT_UART1_CLK_EN |
|
|
#endif
|
|
DPORT_USB_CLK_EN |
|
|
DPORT_SPI2_CLK_EN |
|
|
DPORT_I2C_EXT0_CLK_EN |
|
|
DPORT_UHCI0_CLK_EN |
|
|
DPORT_RMT_CLK_EN |
|
|
DPORT_UHCI1_CLK_EN |
|
|
DPORT_SPI3_CLK_EN |
|
|
DPORT_SPI4_CLK_EN |
|
|
DPORT_I2C_EXT1_CLK_EN |
|
|
DPORT_I2S1_CLK_EN |
|
|
DPORT_SPI2_DMA_CLK_EN |
|
|
DPORT_SPI3_DMA_CLK_EN;
|
|
common_perip_clk1 = DPORT_SPI_SHARED_DMA_CLK_EN;
|
|
|
|
/* Change I2S clock to audio PLL first. Because if I2S uses 160MHz clock,
|
|
* the current is not reduced when disable I2S clock.
|
|
*/
|
|
REG_SET_FIELD(I2S_CLKM_CONF_REG(0), I2S_CLK_SEL, I2S_CLK_AUDIO_PLL);
|
|
REG_SET_FIELD(I2S_CLKM_CONF_REG(1), I2S_CLK_SEL, I2S_CLK_AUDIO_PLL);
|
|
|
|
/* Disable some peripheral clocks. */
|
|
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, common_perip_clk);
|
|
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, common_perip_clk);
|
|
|
|
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN1_REG, common_perip_clk1);
|
|
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN1_REG, common_perip_clk1);
|
|
|
|
/* Disable hardware crypto clocks. */
|
|
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERI_CLK_EN_REG, hwcrypto_perip_clk);
|
|
DPORT_SET_PERI_REG_MASK(DPORT_PERI_RST_EN_REG, hwcrypto_perip_clk);
|
|
|
|
/* Disable WiFi/BT/SDIO clocks. */
|
|
DPORT_CLEAR_PERI_REG_MASK(DPORT_WIFI_CLK_EN_REG, wifi_bt_sdio_clk);
|
|
|
|
/* Enable RNG clock. */
|
|
periph_module_enable(PERIPH_RNG_MODULE);
|
|
}
|