OVMS3-idf/components/ethernet/emac_common.h
morris 161a506f00 ethernet: enlarge ethernet task stack size
1. In original driver, the stack size for emac driver task "emacT" is only 2048 Bytes, which also can not be changed by user.
2. Each time when invoking "emac_start" function, it will reset emac registers, the driver should reconfig some important registers again.
2018-09-07 10:16:34 +08:00

128 lines
2.9 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _EMAC_COMMON_H_
#define _EMAC_COMMON_H_
#include <stdint.h>
#include "esp_err.h"
#include "emac_dev.h"
#include "esp_eth.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef uint32_t emac_sig_t;
typedef uint32_t emac_par_t;
typedef struct {
emac_sig_t sig;
emac_par_t par;
} emac_event_t;
enum emac_runtime_status {
EMAC_RUNTIME_NOT_INIT = 0,
EMAC_RUNTIME_INIT,
EMAC_RUNTIME_START,
EMAC_RUNTIME_STOP,
};
enum {
SIG_EMAC_RX_UNAVAIL,
SIG_EMAC_TX_DONE,
SIG_EMAC_RX_DONE,
SIG_EMAC_START,
SIG_EMAC_STOP,
SIG_EMAC_CHECK_LINK,
SIG_EMAC_MAX
};
struct emac_config_data {
eth_phy_base_t phy_addr;
eth_mode_t mac_mode;
eth_clock_mode_t clock_mode;
struct dma_extended_desc *dma_etx;
uint32_t cur_tx;
uint32_t dirty_tx;
int32_t cnt_tx;
struct dma_extended_desc *dma_erx;
uint32_t cur_rx;
uint32_t dirty_rx;
int32_t cnt_rx;
uint32_t rx_need_poll;
bool phy_link_up;
enum emac_runtime_status emac_status;
uint8_t macaddr[6];
eth_phy_func phy_init;
eth_tcpip_input_func emac_tcpip_input;
eth_gpio_config_func emac_gpio_config;
eth_phy_check_link_func emac_phy_check_link;
eth_phy_check_init_func emac_phy_check_init;
eth_phy_get_speed_mode_func emac_phy_get_speed_mode;
eth_phy_get_duplex_mode_func emac_phy_get_duplex_mode;
bool emac_flow_ctrl_enable;
bool emac_flow_ctrl_partner_support;
eth_phy_get_partner_pause_enable_func emac_phy_get_partner_pause_enable;
eth_phy_power_enable_func emac_phy_power_enable;
};
enum emac_post_type {
EMAC_POST_ASYNC,
EMAC_POST_SYNC,
};
struct emac_post_cmd {
void *cmd;
enum emac_post_type post_type;
};
struct emac_tx_cmd {
uint8_t *buf;
uint16_t size;
int8_t err;
};
struct emac_open_cmd {
int8_t err;
};
struct emac_close_cmd {
int8_t err;
};
#define DMA_RX_BUF_NUM CONFIG_DMA_RX_BUF_NUM
#define DMA_TX_BUF_NUM CONFIG_DMA_TX_BUF_NUM
#define EMAC_TASK_PRIORITY CONFIG_EMAC_TASK_PRIORITY
#define EMAC_TASK_STACK_SIZE CONFIG_EMAC_TASK_STACK_SIZE
#define DMA_RX_BUF_SIZE 1600
#define DMA_TX_BUF_SIZE 1600
//rest buf num
#define FLOW_CONTROL_HIGH_WATERMARK 3
//used buf num
#define FLOW_CONTROL_LOW_WATERMARK 6
#define PHY_LINK_CHECK_NUM 5
#define EMAC_CMD_OK 0
#define EMAC_CMD_FAIL -1
#ifdef __cplusplus
}
#endif
#endif