Small changes to clock calibration value will cause increasing errors the longer the device runs. Consider the case of deep sleep, assuming that RTC counter is used for timekeeping: - before sleep: time_before = rtc_counter * calibration_val - after sleep: time_after = (rtc_counter + sleep_count) * (calibration_val + epsilon) where 'epsilon' is a small estimation error of 'calibration_val'. The apparent sleep duration thus will be: time_after - time_before = sleep_count * (calibration_val + epsilon) + rtc_counter * epsilon Second term on the right hand side is the error in time difference estimation, it is proportional to the total system runtime (rtc_counter). To avoid this issue, this change makes RTC_SLOW_CLK calibration value persistent across restarts. This allows the calibration value update to be preformed, while keeping time after update same as before the update.
218 lines
6.9 KiB
C
218 lines
6.9 KiB
C
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#ifndef _ROM_RTC_H_
|
|
#define _ROM_RTC_H_
|
|
|
|
#include "ets_sys.h"
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
|
|
#include "soc/soc.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** \defgroup rtc_apis, rtc registers and memory related apis
|
|
* @brief rtc apis
|
|
*/
|
|
|
|
/** @addtogroup rtc_apis
|
|
* @{
|
|
*/
|
|
|
|
/**************************************************************************************
|
|
* Note: *
|
|
* Some Rtc memory and registers are used, in ROM or in internal library. *
|
|
* Please do not use reserved or used rtc memory or registers. *
|
|
* *
|
|
*************************************************************************************
|
|
* RTC Memory & Store Register usage
|
|
*************************************************************************************
|
|
* rtc memory addr type size usage
|
|
* 0x3ff61000(0x50000000) Slow SIZE_CP Co-Processor code/Reset Entry
|
|
* 0x3ff61000+SIZE_CP Slow 4096-SIZE_CP
|
|
* 0x3ff62800 Slow 4096 Reserved
|
|
*
|
|
* 0x3ff80000(0x400c0000) Fast 8192 deep sleep entry code
|
|
*
|
|
*************************************************************************************
|
|
* RTC store registers usage
|
|
* RTC_CNTL_STORE0_REG Reserved
|
|
* RTC_CNTL_STORE1_REG RTC_SLOW_CLK calibration value
|
|
* RTC_CNTL_STORE2_REG Boot time, low word
|
|
* RTC_CNTL_STORE3_REG Boot time, high word
|
|
* RTC_CNTL_STORE4_REG External XTAL frequency
|
|
* RTC_CNTL_STORE5_REG APB bus frequency
|
|
* RTC_CNTL_STORE6_REG FAST_RTC_MEMORY_ENTRY
|
|
* RTC_CNTL_STORE7_REG FAST_RTC_MEMORY_CRC
|
|
*************************************************************************************
|
|
*/
|
|
|
|
#define RTC_SLOW_CLK_CAL_REG RTC_CNTL_STORE1_REG
|
|
#define RTC_BOOT_TIME_LOW_REG RTC_CNTL_STORE2_REG
|
|
#define RTC_BOOT_TIME_HIGH_REG RTC_CNTL_STORE3_REG
|
|
#define RTC_XTAL_FREQ_REG RTC_CNTL_STORE4_REG
|
|
#define RTC_APB_FREQ_REG RTC_CNTL_STORE5_REG
|
|
#define RTC_ENTRY_ADDR_REG RTC_CNTL_STORE6_REG
|
|
#define RTC_MEMORY_CRC_REG RTC_CNTL_STORE7_REG
|
|
|
|
|
|
typedef enum {
|
|
AWAKE = 0, //<CPU ON
|
|
LIGHT_SLEEP = BIT0, //CPU waiti, PLL ON. We don't need explicitly set this mode.
|
|
DEEP_SLEEP = BIT1 //CPU OFF, PLL OFF, only specific timer could wake up
|
|
} SLEEP_MODE;
|
|
|
|
typedef enum {
|
|
NO_MEAN = 0,
|
|
POWERON_RESET = 1, /**<1, Vbat power on reset*/
|
|
SW_RESET = 3, /**<3, Software reset digital core*/
|
|
OWDT_RESET = 4, /**<4, Legacy watch dog reset digital core*/
|
|
DEEPSLEEP_RESET = 5, /**<3, Deep Sleep reset digital core*/
|
|
SDIO_RESET = 6, /**<6, Reset by SLC module, reset digital core*/
|
|
TG0WDT_SYS_RESET = 7, /**<7, Timer Group0 Watch dog reset digital core*/
|
|
TG1WDT_SYS_RESET = 8, /**<8, Timer Group1 Watch dog reset digital core*/
|
|
RTCWDT_SYS_RESET = 9, /**<9, RTC Watch dog Reset digital core*/
|
|
INTRUSION_RESET = 10, /**<10, Instrusion tested to reset CPU*/
|
|
TGWDT_CPU_RESET = 11, /**<11, Time Group reset CPU*/
|
|
SW_CPU_RESET = 12, /**<12, Software reset CPU*/
|
|
RTCWDT_CPU_RESET = 13, /**<13, RTC Watch dog Reset CPU*/
|
|
EXT_CPU_RESET = 14, /**<14, for APP CPU, reseted by PRO CPU*/
|
|
RTCWDT_BROWN_OUT_RESET = 15, /**<15, Reset when the vdd voltage is not stable*/
|
|
RTCWDT_RTC_RESET = 16 /**<16, RTC Watch dog reset digital core and rtc module*/
|
|
} RESET_REASON;
|
|
|
|
typedef enum {
|
|
NO_SLEEP = 0,
|
|
EXT_EVENT0_TRIG = BIT0,
|
|
EXT_EVENT1_TRIG = BIT1,
|
|
GPIO_TRIG = BIT2,
|
|
TIMER_EXPIRE = BIT3,
|
|
SDIO_TRIG = BIT4,
|
|
MAC_TRIG = BIT5,
|
|
UART0_TRIG = BIT6,
|
|
UART1_TRIG = BIT7,
|
|
TOUCH_TRIG = BIT8,
|
|
SAR_TRIG = BIT9,
|
|
BT_TRIG = BIT10
|
|
} WAKEUP_REASON;
|
|
|
|
typedef enum {
|
|
DISEN_WAKEUP = NO_SLEEP,
|
|
EXT_EVENT0_TRIG_EN = EXT_EVENT0_TRIG,
|
|
EXT_EVENT1_TRIG_EN = EXT_EVENT1_TRIG,
|
|
GPIO_TRIG_EN = GPIO_TRIG,
|
|
TIMER_EXPIRE_EN = TIMER_EXPIRE,
|
|
SDIO_TRIG_EN = SDIO_TRIG,
|
|
MAC_TRIG_EN = MAC_TRIG,
|
|
UART0_TRIG_EN = UART0_TRIG,
|
|
UART1_TRIG_EN = UART1_TRIG,
|
|
TOUCH_TRIG_EN = TOUCH_TRIG,
|
|
SAR_TRIG_EN = SAR_TRIG,
|
|
BT_TRIG_EN = BT_TRIG
|
|
} WAKEUP_ENABLE;
|
|
|
|
typedef enum {
|
|
NO_INT = 0,
|
|
WAKEUP_INT = BIT0,
|
|
REJECT_INT = BIT1,
|
|
SDIO_IDLE_INT = BIT2,
|
|
RTC_WDT_INT = BIT3,
|
|
RTC_TIME_VALID_INT = BIT4
|
|
} RTC_INT_REASON;
|
|
|
|
typedef enum {
|
|
DISEN_INT = 0,
|
|
WAKEUP_INT_EN = WAKEUP_INT,
|
|
REJECT_INT_EN = REJECT_INT,
|
|
SDIO_IDLE_INT_EN = SDIO_IDLE_INT,
|
|
RTC_WDT_INT_EN = RTC_WDT_INT,
|
|
RTC_TIME_VALID_INT_EN = RTC_TIME_VALID_INT
|
|
} RTC_INT_EN;
|
|
|
|
/**
|
|
* @brief Get the reset reason for CPU.
|
|
*
|
|
* @param int cpu_no : CPU no.
|
|
*
|
|
* @return RESET_REASON
|
|
*/
|
|
RESET_REASON rtc_get_reset_reason(int cpu_no);
|
|
|
|
/**
|
|
* @brief Get the wakeup cause for CPU.
|
|
*
|
|
* @param int cpu_no : CPU no.
|
|
*
|
|
* @return WAKEUP_REASON
|
|
*/
|
|
WAKEUP_REASON rtc_get_wakeup_cause(void);
|
|
|
|
/**
|
|
* @brief Get CRC for Fast RTC Memory.
|
|
*
|
|
* @param uint32_t start_addr : 0 - 0x7ff for Fast RTC Memory.
|
|
*
|
|
* @param uint32_t crc_len : 0 - 0x7ff, 0 for 4 byte, 0x7ff for 0x2000 byte.
|
|
*
|
|
* @return uint32_t : CRC32 result
|
|
*/
|
|
uint32_t calc_rtc_memory_crc(uint32_t start_addr, uint32_t crc_len);
|
|
|
|
/**
|
|
* @brief Set CRC of Fast RTC memory 0-0x7ff into RTC STORE7.
|
|
*
|
|
* @param None
|
|
*
|
|
* @return None
|
|
*/
|
|
void set_rtc_memory_crc(void);
|
|
|
|
/**
|
|
* @brief Software Reset digital core.
|
|
*
|
|
* It is not recommended to use this function in esp-idf, use
|
|
* esp_restart() instead.
|
|
*
|
|
* @param None
|
|
*
|
|
* @return None
|
|
*/
|
|
void software_reset(void);
|
|
|
|
/**
|
|
* @brief Software Reset digital core.
|
|
*
|
|
* It is not recommended to use this function in esp-idf, use
|
|
* esp_restart() instead.
|
|
*
|
|
* @param int cpu_no : The CPU to reset, 0 for PRO CPU, 1 for APP CPU.
|
|
*
|
|
* @return None
|
|
*/
|
|
void software_reset_cpu(int cpu_no);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* _ROM_RTC_H_ */
|
|
|