OVMS3-idf/docs/en/get-started/linux-setup.rst

121 lines
4 KiB
ReStructuredText

*************************************
Standard Setup of Toolchain for Linux
*************************************
:link_to_translation:`zh_CN:[中文]`
Install Prerequisites
=====================
To compile with ESP-IDF you need to get the following packages:
- CentOS 7::
sudo yum install gcc git wget make ncurses-devel flex bison gperf python pyserial
- Ubuntu and Debian::
sudo apt-get install gcc git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial
- Arch::
sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial
.. note::
Some older (pre-2014) Linux distributions may use ``pyserial`` version 2.x which is not supported by ESP-IDF.
In this case please install a supported version via ``pip`` as it is described in section
:ref:`get-started-get-packages`.
Toolchain Setup
===============
.. include:: /_build/inc/download-links.inc
ESP32 toolchain for Linux is available for download from Espressif website:
- for 64-bit Linux:
|download_link_linux64|
- for 32-bit Linux:
|download_link_linux32|
1. Download this file, then extract it in ``~/esp`` directory:
- for 64-bit Linux:
.. include:: /_build/inc/unpack-code-linux64.inc
- for 32-bit Linux:
.. include:: /_build/inc/unpack-code-linux32.inc
.. _setup-linux-toolchain-add-it-to-path:
2. The toolchain will be extracted into ``~/esp/xtensa-esp32-elf/`` directory.
To use it, you will need to update your ``PATH`` environment variable in ``~/.profile`` file. To make ``xtensa-esp32-elf`` available for all terminal sessions, add the following line to your ``~/.profile`` file::
export PATH="$HOME/esp/xtensa-esp32-elf/bin:$PATH"
Alternatively, you may create an alias for the above command. This way you can get the toolchain only when you need it. To do this, add different line to your ``~/.profile`` file::
alias get_esp32='export PATH="$HOME/esp/xtensa-esp32-elf/bin:$PATH"'
Then when you need the toolchain you can type ``get_esp32`` on the command line and the toolchain will be added to your ``PATH``.
.. note::
If you have ``/bin/bash`` set as login shell, and both ``.bash_profile`` and ``.profile`` exist, then update ``.bash_profile`` instead. In CentOS, ``alias`` should set in ``.bashrc``.
3. Log off and log in back to make the ``.profile`` changes effective. Run the following command to verify if ``PATH`` is correctly set::
printenv PATH
You are looking for similar result containing toolchain's path at the end of displayed string::
$ printenv PATH
/home/user-name/bin:/home/user-name/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/home/user-name/esp/xtensa-esp32-elf/bin
Instead of ``/home/user-name`` there should be a home path specific to your installation.
Permission issues /dev/ttyUSB0
------------------------------
With some Linux distributions you may get the ``Failed to open port /dev/ttyUSB0`` error message when flashing the ESP32. :ref:`This can be solved by adding the current user to the dialout group<linux-dialout-group>`.
Arch Linux Users
----------------
To run the precompiled gdb (xtensa-esp32-elf-gdb) in Arch Linux requires ncurses 5, but Arch uses ncurses 6.
Backwards compatibility libraries are available in AUR_ for native and lib32 configurations:
- https://aur.archlinux.org/packages/ncurses5-compat-libs/
- https://aur.archlinux.org/packages/lib32-ncurses5-compat-libs/
Before installing these packages you might need to add the author's public key to your keyring as described in the "Comments" section at the links above.
Alternatively, use crosstool-NG to compile a gdb that links against ncurses 6.
Next Steps
==========
To carry on with development environment setup, proceed to section :ref:`get-started-get-esp-idf`.
Related Documents
=================
.. toctree::
:maxdepth: 1
linux-setup-scratch
.. _AUR: https://wiki.archlinux.org/index.php/Arch_User_Repository