5ebf4f7022
esp32: Add option to place .rtc_data and .rtc_rodata into the RTC_FAST segment See merge request idf/esp-idf!2128
1203 lines
47 KiB
Text
1203 lines
47 KiB
Text
menu "ESP32-specific"
|
|
|
|
choice ESP32_DEFAULT_CPU_FREQ_MHZ
|
|
prompt "CPU frequency"
|
|
default ESP32_DEFAULT_CPU_FREQ_160
|
|
help
|
|
CPU frequency to be set on application startup.
|
|
|
|
config ESP32_DEFAULT_CPU_FREQ_80
|
|
bool "80 MHz"
|
|
config ESP32_DEFAULT_CPU_FREQ_160
|
|
bool "160 MHz"
|
|
config ESP32_DEFAULT_CPU_FREQ_240
|
|
bool "240 MHz"
|
|
endchoice
|
|
|
|
config ESP32_DEFAULT_CPU_FREQ_MHZ
|
|
int
|
|
default 80 if ESP32_DEFAULT_CPU_FREQ_80
|
|
default 160 if ESP32_DEFAULT_CPU_FREQ_160
|
|
default 240 if ESP32_DEFAULT_CPU_FREQ_240
|
|
|
|
config SPIRAM_SUPPORT
|
|
bool "Support for external, SPI-connected RAM"
|
|
default "n"
|
|
help
|
|
This enables support for an external SPI RAM chip, connected in parallel with the
|
|
main SPI flash chip.
|
|
|
|
menu "SPI RAM config"
|
|
depends on SPIRAM_SUPPORT
|
|
|
|
config SPIRAM_BOOT_INIT
|
|
bool "Initialize SPI RAM when booting the ESP32"
|
|
default "y"
|
|
help
|
|
If this is enabled, the SPI RAM will be enabled during initial boot. Unless you
|
|
have specific requirements, you'll want to leave this enabled so memory allocated
|
|
during boot-up can also be placed in SPI RAM.
|
|
|
|
config SPIRAM_IGNORE_NOTFOUND
|
|
bool "Ignore PSRAM when not found"
|
|
default "n"
|
|
depends on SPIRAM_BOOT_INIT
|
|
help
|
|
Normally, if psram initialization is enabled during compile time but not found at runtime, it
|
|
is seen as an error making the ESP32 panic. If this is enabled, the ESP32 will keep on
|
|
running but will not add the (non-existing) RAM to any allocator.
|
|
|
|
choice SPIRAM_USE
|
|
prompt "SPI RAM access method"
|
|
default SPIRAM_USE_MALLOC
|
|
help
|
|
The SPI RAM can be accessed in multiple methods: by just having it available as an unmanaged
|
|
memory region in the ESP32 memory map, by integrating it in the ESP32s heap as 'special' memory
|
|
needing heap_caps_malloc to allocate, or by fully integrating it making malloc() also able to
|
|
return SPI RAM pointers.
|
|
|
|
config SPIRAM_USE_MEMMAP
|
|
bool "Integrate RAM into ESP32 memory map"
|
|
config SPIRAM_USE_CAPS_ALLOC
|
|
bool "Make RAM allocatable using heap_caps_malloc(..., MALLOC_CAP_SPIRAM)"
|
|
config SPIRAM_USE_MALLOC
|
|
bool "Make RAM allocatable using malloc() as well"
|
|
select SUPPORT_STATIC_ALLOCATION
|
|
endchoice
|
|
|
|
choice SPIRAM_TYPE
|
|
prompt "Type of SPI RAM chip in use"
|
|
default SPIRAM_TYPE_ESPPSRAM32
|
|
|
|
config SPIRAM_TYPE_ESPPSRAM32
|
|
bool "ESP-PSRAM32 or IS25WP032"
|
|
endchoice
|
|
|
|
config SPIRAM_SIZE
|
|
int
|
|
default 4194304 if SPIRAM_TYPE_ESPPSRAM32
|
|
default 0
|
|
|
|
choice SPIRAM_SPEED
|
|
prompt "Set RAM clock speed"
|
|
default SPIRAM_CACHE_SPEED_40M
|
|
help
|
|
Select the speed for the SPI RAM chip.
|
|
If SPI RAM is enabled, we only support three combinations of SPI speed mode we supported now:
|
|
|
|
1. Flash SPI running at 40Mhz and RAM SPI running at 40Mhz
|
|
2. Flash SPI running at 80Mhz and RAM SPI running at 40Mhz
|
|
3. Flash SPI running at 80Mhz and RAM SPI running at 80Mhz
|
|
|
|
Note: If the third mode(80Mhz+80Mhz) is enabled, the VSPI port will be occupied by the system.
|
|
Application code should never touch VSPI hardware in this case. The option to select
|
|
80MHz will only be visible if the flash SPI speed is also 80MHz. (ESPTOOLPY_FLASHFREQ_80M is true)
|
|
|
|
config SPIRAM_SPEED_40M
|
|
bool "40MHz clock speed"
|
|
config SPIRAM_SPEED_80M
|
|
depends on ESPTOOLPY_FLASHFREQ_80M
|
|
bool "80MHz clock speed"
|
|
endchoice
|
|
|
|
config SPIRAM_MEMTEST
|
|
bool "Run memory test on SPI RAM initialization"
|
|
default "y"
|
|
depends on SPIRAM_BOOT_INIT
|
|
help
|
|
Runs a rudimentary memory test on initialization. Aborts when memory test fails. Disable this for
|
|
slightly faster startop.
|
|
|
|
config SPIRAM_CACHE_WORKAROUND
|
|
bool "Enable workaround for bug in SPI RAM cache for Rev1 ESP32s"
|
|
depends on SPIRAM_USE_MEMMAP || SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC
|
|
default "y"
|
|
help
|
|
Revision 1 of the ESP32 has a bug that can cause a write to PSRAM not to take place in some situations
|
|
when the cache line needs to be fetched from external RAM and an interrupt occurs. This enables a
|
|
fix in the compiler that makes sure the specific code that is vulnerable to this will not be emitted.
|
|
|
|
This will also not use any bits of newlib that are located in ROM, opting for a version that is compiled
|
|
with the workaround and located in flash instead.
|
|
|
|
|
|
config SPIRAM_MALLOC_ALWAYSINTERNAL
|
|
int "Maximum malloc() size, in bytes, to always put in internal memory"
|
|
depends on SPIRAM_USE_MALLOC
|
|
default 16384
|
|
range 0 131072
|
|
help
|
|
If malloc() is capable of also allocating SPI-connected ram, its allocation strategy will prefer to allocate chunks less
|
|
than this size in internal memory, while allocations larger than this will be done from external RAM.
|
|
If allocation from the preferred region fails, an attempt is made to allocate from the non-preferred
|
|
region instead, so malloc() will not suddenly fail when either internal or external memory is full.
|
|
|
|
config WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
|
|
bool "Try to allocate memories of WiFi and LWIP in SPIRAM firstly. If failed, allocate internal memory"
|
|
depends on SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC
|
|
default "n"
|
|
help
|
|
Try to allocate memories of WiFi and LWIP in SPIRAM firstly. If failed, try to allocate internal memory then.
|
|
|
|
config SPIRAM_MALLOC_RESERVE_INTERNAL
|
|
int "Reserve this amount of bytes for data that specifically needs to be in DMA or internal memory"
|
|
depends on SPIRAM_USE_MALLOC
|
|
default 32768
|
|
range 0 262144
|
|
help
|
|
Because the external/internal RAM allocation strategy is not always perfect, it sometimes may happen
|
|
that the internal memory is entirely filled up. This causes allocations that are specifically done in
|
|
internal memory, for example the stack for new tasks or memory to service DMA or have memory that's
|
|
also available when SPI cache is down, to fail. This option reserves a pool specifically for requests
|
|
like that; the memory in this pool is not given out when a normal malloc() is called.
|
|
|
|
Set this to 0 to disable this feature.
|
|
|
|
Note that because FreeRTOS stacks are forced to internal memory, they will also use this memory pool;
|
|
be sure to keep this in mind when adjusting this value.
|
|
|
|
Note also that the DMA reserved pool may not be one single contiguous memory region, depending on the
|
|
configured size and the static memory usage of the app.
|
|
|
|
|
|
config SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY
|
|
bool "Allow external memory as an argument to xTaskCreateStatic"
|
|
default n
|
|
depends on SPIRAM_USE_MALLOC
|
|
help
|
|
Because some bits of the ESP32 code environment cannot be recompiled with the cache workaround, normally
|
|
tasks cannot be safely run with their stack residing in external memory; for this reason xTaskCreate and
|
|
friends always allocate stack in internal memory and xTaskCreateStatic will check if the memory passed
|
|
to it is in internal memory. If you have a task that needs a large amount of stack and does not call on
|
|
ROM code in any way (no direct calls, but also no Bluetooth/WiFi), you can try to disable this and use
|
|
xTaskCreateStatic to create the tasks stack in external memory.
|
|
|
|
endmenu
|
|
|
|
config MEMMAP_TRACEMEM
|
|
bool
|
|
default "n"
|
|
|
|
config MEMMAP_TRACEMEM_TWOBANKS
|
|
bool
|
|
default "n"
|
|
|
|
config ESP32_TRAX
|
|
bool "Use TRAX tracing feature"
|
|
default "n"
|
|
select MEMMAP_TRACEMEM
|
|
help
|
|
The ESP32 contains a feature which allows you to trace the execution path the processor
|
|
has taken through the program. This is stored in a chunk of 32K (16K for single-processor)
|
|
of memory that can't be used for general purposes anymore. Disable this if you do not know
|
|
what this is.
|
|
|
|
config ESP32_TRAX_TWOBANKS
|
|
bool "Reserve memory for tracing both pro as well as app cpu execution"
|
|
default "n"
|
|
depends on ESP32_TRAX && !FREERTOS_UNICORE
|
|
select MEMMAP_TRACEMEM_TWOBANKS
|
|
help
|
|
The ESP32 contains a feature which allows you to trace the execution path the processor
|
|
has taken through the program. This is stored in a chunk of 32K (16K for single-processor)
|
|
of memory that can't be used for general purposes anymore. Disable this if you do not know
|
|
what this is.
|
|
|
|
# Memory to reverse for trace, used in linker script
|
|
config TRACEMEM_RESERVE_DRAM
|
|
hex
|
|
default 0x8000 if MEMMAP_TRACEMEM && MEMMAP_TRACEMEM_TWOBANKS
|
|
default 0x4000 if MEMMAP_TRACEMEM && !MEMMAP_TRACEMEM_TWOBANKS
|
|
default 0x0
|
|
|
|
choice ESP32_COREDUMP_TO_FLASH_OR_UART
|
|
prompt "Core dump destination"
|
|
default ESP32_ENABLE_COREDUMP_TO_NONE
|
|
help
|
|
Select place to store core dump: flash, uart or none (to disable core dumps generation).
|
|
|
|
If core dump is configured to be stored in flash and custom partition table is used add
|
|
corresponding entry to your CSV. For examples, please see predefined partition table CSV descriptions
|
|
in the components/partition_table directory.
|
|
|
|
config ESP32_ENABLE_COREDUMP_TO_FLASH
|
|
bool "Flash"
|
|
select ESP32_ENABLE_COREDUMP
|
|
config ESP32_ENABLE_COREDUMP_TO_UART
|
|
bool "UART"
|
|
select ESP32_ENABLE_COREDUMP
|
|
config ESP32_ENABLE_COREDUMP_TO_NONE
|
|
bool "None"
|
|
endchoice
|
|
|
|
config ESP32_ENABLE_COREDUMP
|
|
bool
|
|
default F
|
|
help
|
|
Enables/disable core dump module.
|
|
|
|
config ESP32_CORE_DUMP_UART_DELAY
|
|
int "Core dump print to UART delay"
|
|
depends on ESP32_ENABLE_COREDUMP_TO_UART
|
|
default 0
|
|
help
|
|
Config delay (in ms) before printing core dump to UART.
|
|
Delay can be interrupted by pressing Enter key.
|
|
|
|
config ESP32_CORE_DUMP_LOG_LEVEL
|
|
int "Core dump module logging level"
|
|
depends on ESP32_ENABLE_COREDUMP
|
|
default 1
|
|
help
|
|
Config core dump module logging level (0-5).
|
|
|
|
choice NUMBER_OF_UNIVERSAL_MAC_ADDRESS
|
|
bool "Number of universally administered (by IEEE) MAC address"
|
|
default FOUR_UNIVERSAL_MAC_ADDRESS
|
|
help
|
|
Configure the number of universally administered (by IEEE) MAC addresses.
|
|
During initialisation, MAC addresses for each network interface are generated or derived from a
|
|
single base MAC address.
|
|
If the number of universal MAC addresses is four, all four interfaces (WiFi station, WiFi softap,
|
|
Bluetooth and Ethernet) receive a universally administered MAC address. These are generated
|
|
sequentially by adding 0, 1, 2 and 3 (respectively) to the final octet of the base MAC address.
|
|
If the number of universal MAC addresses is two, only two interfaces (WiFi station and Bluetooth)
|
|
receive a universally administered MAC address. These are generated sequentially by adding 0
|
|
and 1 (respectively) to the base MAC address. The remaining two interfaces (WiFi softap and Ethernet)
|
|
receive local MAC addresses. These are derived from the universal WiFi station and Bluetooth MAC
|
|
addresses, respectively.
|
|
When using the default (Espressif-assigned) base MAC address, either setting can be used. When using
|
|
a custom universal MAC address range, the correct setting will depend on the allocation of MAC
|
|
addresses in this range (either 2 or 4 per device.)
|
|
|
|
config TWO_UNIVERSAL_MAC_ADDRESS
|
|
bool "Two"
|
|
config FOUR_UNIVERSAL_MAC_ADDRESS
|
|
bool "Four"
|
|
endchoice
|
|
|
|
config NUMBER_OF_UNIVERSAL_MAC_ADDRESS
|
|
int
|
|
default 2 if TWO_UNIVERSAL_MAC_ADDRESS
|
|
default 4 if FOUR_UNIVERSAL_MAC_ADDRESS
|
|
|
|
config SYSTEM_EVENT_QUEUE_SIZE
|
|
int "System event queue size"
|
|
default 32
|
|
help
|
|
Config system event queue size in different application.
|
|
|
|
config SYSTEM_EVENT_TASK_STACK_SIZE
|
|
int "Event loop task stack size"
|
|
default 2304
|
|
help
|
|
Config system event task stack size in different application.
|
|
|
|
config MAIN_TASK_STACK_SIZE
|
|
int "Main task stack size"
|
|
default 3584
|
|
help
|
|
Configure the "main task" stack size. This is the stack of the task
|
|
which calls app_main(). If app_main() returns then this task is deleted
|
|
and its stack memory is freed.
|
|
|
|
config IPC_TASK_STACK_SIZE
|
|
int "Inter-Processor Call (IPC) task stack size"
|
|
default 1024
|
|
range 512 65536 if !ESP32_APPTRACE_ENABLE
|
|
range 2048 65536 if ESP32_APPTRACE_ENABLE
|
|
help
|
|
Configure the IPC tasks stack size. One IPC task runs on each core
|
|
(in dual core mode), and allows for cross-core function calls.
|
|
|
|
See IPC documentation for more details.
|
|
|
|
The default stack size should be enough for most common use cases.
|
|
It can be shrunk if you are sure that you do not use any custom
|
|
IPC functionality.
|
|
|
|
config TIMER_TASK_STACK_SIZE
|
|
int "High-resolution timer task stack size"
|
|
default 3584
|
|
range 2048 65536
|
|
help
|
|
Configure the stack size of esp_timer/ets_timer task. This task is used
|
|
to dispatch callbacks of timers created using ets_timer and esp_timer
|
|
APIs. If you are seing stack overflow errors in timer task, increase
|
|
this value.
|
|
|
|
Note that this is not the same as FreeRTOS timer task. To configure
|
|
FreeRTOS timer task size, see "FreeRTOS timer task stack size" option
|
|
in "FreeRTOS" menu.
|
|
|
|
choice NEWLIB_STDOUT_LINE_ENDING
|
|
prompt "Line ending for UART output"
|
|
default NEWLIB_STDOUT_LINE_ENDING_CRLF
|
|
help
|
|
This option allows configuring the desired line endings sent to UART
|
|
when a newline ('\n', LF) appears on stdout.
|
|
Three options are possible:
|
|
|
|
CRLF: whenever LF is encountered, prepend it with CR
|
|
|
|
LF: no modification is applied, stdout is sent as is
|
|
|
|
CR: each occurence of LF is replaced with CR
|
|
|
|
This option doesn't affect behavior of the UART driver (drivers/uart.h).
|
|
|
|
config NEWLIB_STDOUT_LINE_ENDING_CRLF
|
|
bool "CRLF"
|
|
config NEWLIB_STDOUT_LINE_ENDING_LF
|
|
bool "LF"
|
|
config NEWLIB_STDOUT_LINE_ENDING_CR
|
|
bool "CR"
|
|
endchoice
|
|
|
|
choice NEWLIB_STDIN_LINE_ENDING
|
|
prompt "Line ending for UART input"
|
|
default NEWLIB_STDIN_LINE_ENDING_CR
|
|
help
|
|
This option allows configuring which input sequence on UART produces
|
|
a newline ('\n', LF) on stdin.
|
|
Three options are possible:
|
|
|
|
CRLF: CRLF is converted to LF
|
|
|
|
LF: no modification is applied, input is sent to stdin as is
|
|
|
|
CR: each occurence of CR is replaced with LF
|
|
|
|
This option doesn't affect behavior of the UART driver (drivers/uart.h).
|
|
|
|
config NEWLIB_STDIN_LINE_ENDING_CRLF
|
|
bool "CRLF"
|
|
config NEWLIB_STDIN_LINE_ENDING_LF
|
|
bool "LF"
|
|
config NEWLIB_STDIN_LINE_ENDING_CR
|
|
bool "CR"
|
|
endchoice
|
|
|
|
config NEWLIB_NANO_FORMAT
|
|
bool "Enable 'nano' formatting options for printf/scanf family"
|
|
default n
|
|
help
|
|
ESP32 ROM contains parts of newlib C library, including printf/scanf family
|
|
of functions. These functions have been compiled with so-called "nano"
|
|
formatting option. This option doesn't support 64-bit integer formats and C99
|
|
features, such as positional arguments.
|
|
|
|
For more details about "nano" formatting option, please see newlib readme file,
|
|
search for '--enable-newlib-nano-formatted-io':
|
|
https://sourceware.org/newlib/README
|
|
|
|
If this option is enabled, build system will use functions available in
|
|
ROM, reducing the application binary size. Functions available in ROM run
|
|
faster than functions which run from flash. Functions available in ROM can
|
|
also run when flash instruction cache is disabled.
|
|
|
|
If you need 64-bit integer formatting support or C99 features, keep this
|
|
option disabled.
|
|
|
|
choice CONSOLE_UART
|
|
prompt "UART for console output"
|
|
default CONSOLE_UART_DEFAULT
|
|
help
|
|
Select whether to use UART for console output (through stdout and stderr).
|
|
|
|
- Default is to use UART0 on pins GPIO1(TX) and GPIO3(RX).
|
|
- If "Custom" is selected, UART0 or UART1 can be chosen,
|
|
and any pins can be selected.
|
|
- If "None" is selected, there will be no console output on any UART, except
|
|
for initial output from ROM bootloader. This output can be further suppressed by
|
|
bootstrapping GPIO13 pin to low logic level.
|
|
|
|
config CONSOLE_UART_DEFAULT
|
|
bool "Default: UART0, TX=GPIO1, RX=GPIO3"
|
|
config CONSOLE_UART_CUSTOM
|
|
bool "Custom"
|
|
config CONSOLE_UART_NONE
|
|
bool "None"
|
|
endchoice
|
|
|
|
choice CONSOLE_UART_NUM
|
|
prompt "UART peripheral to use for console output (0-1)"
|
|
depends on CONSOLE_UART_CUSTOM
|
|
default CONSOLE_UART_CUSTOM_NUM_0
|
|
help
|
|
Due of a ROM bug, UART2 is not supported for console output
|
|
via ets_printf.
|
|
|
|
config CONSOLE_UART_CUSTOM_NUM_0
|
|
bool "UART0"
|
|
config CONSOLE_UART_CUSTOM_NUM_1
|
|
bool "UART1"
|
|
endchoice
|
|
|
|
config CONSOLE_UART_NUM
|
|
int
|
|
default 0 if CONSOLE_UART_DEFAULT || CONSOLE_UART_NONE
|
|
default 0 if CONSOLE_UART_CUSTOM_NUM_0
|
|
default 1 if CONSOLE_UART_CUSTOM_NUM_1
|
|
|
|
config CONSOLE_UART_TX_GPIO
|
|
int "UART TX on GPIO#"
|
|
depends on CONSOLE_UART_CUSTOM
|
|
range 0 33
|
|
default 19
|
|
|
|
config CONSOLE_UART_RX_GPIO
|
|
int "UART RX on GPIO#"
|
|
depends on CONSOLE_UART_CUSTOM
|
|
range 0 39
|
|
default 21
|
|
|
|
config CONSOLE_UART_BAUDRATE
|
|
int "UART console baud rate"
|
|
depends on !CONSOLE_UART_NONE
|
|
default 115200
|
|
range 1200 4000000
|
|
|
|
config ULP_COPROC_ENABLED
|
|
bool "Enable Ultra Low Power (ULP) Coprocessor"
|
|
default "n"
|
|
help
|
|
Set to 'y' if you plan to load a firmware for the coprocessor.
|
|
|
|
If this option is enabled, further coprocessor configuration will appear in the Components menu.
|
|
|
|
config ULP_COPROC_RESERVE_MEM
|
|
int
|
|
prompt "RTC slow memory reserved for coprocessor" if ULP_COPROC_ENABLED
|
|
default 512 if ULP_COPROC_ENABLED
|
|
range 32 8192 if ULP_COPROC_ENABLED
|
|
default 0 if !ULP_COPROC_ENABLED
|
|
range 0 0 if !ULP_COPROC_ENABLED
|
|
help
|
|
Bytes of memory to reserve for ULP coprocessor firmware & data.
|
|
|
|
Data is reserved at the beginning of RTC slow memory.
|
|
|
|
choice ESP32_PANIC
|
|
prompt "Panic handler behaviour"
|
|
default ESP32_PANIC_PRINT_REBOOT
|
|
help
|
|
If FreeRTOS detects unexpected behaviour or an unhandled exception, the panic handler is
|
|
invoked. Configure the panic handlers action here.
|
|
|
|
config ESP32_PANIC_PRINT_HALT
|
|
bool "Print registers and halt"
|
|
help
|
|
Outputs the relevant registers over the serial port and halt the
|
|
processor. Needs a manual reset to restart.
|
|
|
|
config ESP32_PANIC_PRINT_REBOOT
|
|
bool "Print registers and reboot"
|
|
help
|
|
Outputs the relevant registers over the serial port and immediately
|
|
reset the processor.
|
|
|
|
config ESP32_PANIC_SILENT_REBOOT
|
|
bool "Silent reboot"
|
|
help
|
|
Just resets the processor without outputting anything
|
|
|
|
config ESP32_PANIC_GDBSTUB
|
|
bool "Invoke GDBStub"
|
|
help
|
|
Invoke gdbstub on the serial port, allowing for gdb to attach to it to do a postmortem
|
|
of the crash.
|
|
endchoice
|
|
|
|
config ESP32_DEBUG_OCDAWARE
|
|
bool "Make exception and panic handlers JTAG/OCD aware"
|
|
default y
|
|
help
|
|
The FreeRTOS panic and unhandled exception handers can detect a JTAG OCD debugger and
|
|
instead of panicking, have the debugger stop on the offending instruction.
|
|
|
|
config ESP32_DEBUG_STUBS_ENABLE
|
|
bool "OpenOCD debug stubs"
|
|
default OPTIMIZATION_LEVEL_DEBUG
|
|
depends on !ESP32_TRAX
|
|
help
|
|
Debug stubs are used by OpenOCD to execute pre-compiled onboard code which does some useful debugging,
|
|
e.g. GCOV data dump.
|
|
|
|
config INT_WDT
|
|
bool "Interrupt watchdog"
|
|
default y
|
|
help
|
|
This watchdog timer can detect if the FreeRTOS tick interrupt has not been called for a certain time,
|
|
either because a task turned off interrupts and did not turn them on for a long time, or because an
|
|
interrupt handler did not return. It will try to invoke the panic handler first and failing that
|
|
reset the SoC.
|
|
|
|
config INT_WDT_TIMEOUT_MS
|
|
int "Interrupt watchdog timeout (ms)"
|
|
depends on INT_WDT
|
|
default 300 if !SPIRAM_SUPPORT
|
|
default 800 if SPIRAM_SUPPORT
|
|
range 10 10000
|
|
help
|
|
The timeout of the watchdog, in miliseconds. Make this higher than the FreeRTOS tick rate.
|
|
|
|
config INT_WDT_CHECK_CPU1
|
|
bool "Also watch CPU1 tick interrupt"
|
|
depends on INT_WDT && !FREERTOS_UNICORE
|
|
default y
|
|
help
|
|
Also detect if interrupts on CPU 1 are disabled for too long.
|
|
|
|
config TASK_WDT
|
|
bool "Initialize Task Watchdog Timer on startup"
|
|
default y
|
|
help
|
|
The Task Watchdog Timer can be used to make sure individual tasks are still
|
|
running. Enabling this option will cause the Task Watchdog Timer to be
|
|
initialized automatically at startup. The Task Watchdog timer can be
|
|
initialized after startup as well (see Task Watchdog Timer API Reference)
|
|
|
|
config TASK_WDT_PANIC
|
|
bool "Invoke panic handler on Task Watchdog timeout"
|
|
depends on TASK_WDT
|
|
default n
|
|
help
|
|
If this option is enabled, the Task Watchdog Timer will be configured to
|
|
trigger the panic handler when it times out. This can also be configured
|
|
at run time (see Task Watchdog Timer API Reference)
|
|
|
|
config TASK_WDT_TIMEOUT_S
|
|
int "Task Watchdog timeout period (seconds)"
|
|
depends on TASK_WDT
|
|
range 1 60
|
|
default 5
|
|
help
|
|
Timeout period configuration for the Task Watchdog Timer in seconds.
|
|
This is also configurable at run time (see Task Watchdog Timer API Reference)
|
|
|
|
config TASK_WDT_CHECK_IDLE_TASK_CPU0
|
|
bool "Watch CPU0 Idle Task"
|
|
depends on TASK_WDT
|
|
default y
|
|
help
|
|
If this option is enabled, the Task Watchdog Timer will watch the CPU0
|
|
Idle Task. Having the Task Watchdog watch the Idle Task allows for detection
|
|
of CPU starvation as the Idle Task not being called is usually a symptom of
|
|
CPU starvation. Starvation of the Idle Task is detrimental as FreeRTOS household
|
|
tasks depend on the Idle Task getting some runtime every now and then.
|
|
|
|
config TASK_WDT_CHECK_IDLE_TASK_CPU1
|
|
bool "Watch CPU1 Idle Task"
|
|
depends on TASK_WDT && !FREERTOS_UNICORE
|
|
default y
|
|
help
|
|
If this option is enabled, the Task Wtachdog Timer will wach the CPU1
|
|
Idle Task.
|
|
|
|
#The brownout detector code is disabled (by making it depend on a nonexisting symbol) because the current revision of ESP32
|
|
#silicon has a bug in the brown-out detector, rendering it unusable for resetting the CPU.
|
|
config BROWNOUT_DET
|
|
bool "Hardware brownout detect & reset"
|
|
default y
|
|
help
|
|
The ESP32 has a built-in brownout detector which can detect if the voltage is lower than
|
|
a specific value. If this happens, it will reset the chip in order to prevent unintended
|
|
behaviour.
|
|
|
|
choice BROWNOUT_DET_LVL_SEL
|
|
prompt "Brownout voltage level"
|
|
depends on BROWNOUT_DET
|
|
default BROWNOUT_DET_LVL_SEL_25
|
|
help
|
|
The brownout detector will reset the chip when the supply voltage is approximately
|
|
below this level. Note that there may be some variation of brownout voltage level
|
|
between each ESP32 chip.
|
|
|
|
#The voltage levels here are estimates, more work needs to be done to figure out the exact voltages
|
|
#of the brownout threshold levels.
|
|
config BROWNOUT_DET_LVL_SEL_0
|
|
bool "2.43V +/- 0.05"
|
|
config BROWNOUT_DET_LVL_SEL_1
|
|
bool "2.48V +/- 0.05"
|
|
config BROWNOUT_DET_LVL_SEL_2
|
|
bool "2.58V +/- 0.05"
|
|
config BROWNOUT_DET_LVL_SEL_3
|
|
bool "2.62V +/- 0.05"
|
|
config BROWNOUT_DET_LVL_SEL_4
|
|
bool "2.67V +/- 0.05"
|
|
config BROWNOUT_DET_LVL_SEL_5
|
|
bool "2.70V +/- 0.05"
|
|
config BROWNOUT_DET_LVL_SEL_6
|
|
bool "2.77V +/- 0.05"
|
|
config BROWNOUT_DET_LVL_SEL_7
|
|
bool "2.80V +/- 0.05"
|
|
endchoice
|
|
|
|
config BROWNOUT_DET_LVL
|
|
int
|
|
default 0 if BROWNOUT_DET_LVL_SEL_0
|
|
default 1 if BROWNOUT_DET_LVL_SEL_1
|
|
default 2 if BROWNOUT_DET_LVL_SEL_2
|
|
default 3 if BROWNOUT_DET_LVL_SEL_3
|
|
default 4 if BROWNOUT_DET_LVL_SEL_4
|
|
default 5 if BROWNOUT_DET_LVL_SEL_5
|
|
default 6 if BROWNOUT_DET_LVL_SEL_6
|
|
default 7 if BROWNOUT_DET_LVL_SEL_7
|
|
|
|
|
|
#Reduce PHY TX power when brownout reset
|
|
config REDUCE_PHY_TX_POWER
|
|
bool "Reduce PHY TX power when brownout reset"
|
|
depends on BROWNOUT_DET
|
|
default y
|
|
help
|
|
When brownout reset occurs, reduce PHY TX power to keep the code running
|
|
|
|
# Note about the use of "FRC1" name: currently FRC1 timer is not used for
|
|
# high resolution timekeeping anymore. Instead the esp_timer API, implemented
|
|
# using FRC2 timer, is used.
|
|
# FRC1 name in the option name is kept for compatibility.
|
|
choice ESP32_TIME_SYSCALL
|
|
prompt "Timers used for gettimeofday function"
|
|
default ESP32_TIME_SYSCALL_USE_RTC_FRC1
|
|
help
|
|
This setting defines which hardware timers are used to
|
|
implement 'gettimeofday' and 'time' functions in C library.
|
|
|
|
- If both high-resolution and RTC timers are used, timekeeping will
|
|
continue in deep sleep. Time will be reported at 1 microsecond
|
|
resolution. This is the default, and the recommended option.
|
|
- If only high-resolution timer is used, gettimeofday will
|
|
provide time at microsecond resolution.
|
|
Time will not be preserved when going into deep sleep mode.
|
|
- If only RTC timer is used, timekeeping will continue in
|
|
deep sleep, but time will be measured at 6.(6) microsecond
|
|
resolution. Also the gettimeofday function itself may take
|
|
longer to run.
|
|
- If no timers are used, gettimeofday and time functions
|
|
return -1 and set errno to ENOSYS.
|
|
- When RTC is used for timekeeping, two RTC_STORE registers are
|
|
used to keep time in deep sleep mode.
|
|
|
|
config ESP32_TIME_SYSCALL_USE_RTC_FRC1
|
|
bool "RTC and high-resolution timer"
|
|
config ESP32_TIME_SYSCALL_USE_RTC
|
|
bool "RTC"
|
|
config ESP32_TIME_SYSCALL_USE_FRC1
|
|
bool "High-resolution timer"
|
|
config ESP32_TIME_SYSCALL_USE_NONE
|
|
bool "None"
|
|
endchoice
|
|
|
|
choice ESP32_RTC_CLOCK_SOURCE
|
|
prompt "RTC clock source"
|
|
default ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC
|
|
help
|
|
Choose which clock is used as RTC clock source.
|
|
|
|
- "Internal 150kHz oscillator" option provides lowest deep sleep current
|
|
consumption, and does not require extra external components. However
|
|
frequency stability with respect to temperature is poor, so time may
|
|
drift in deep/light sleep modes.
|
|
- "External 32kHz crystal" provides better frequency stability, at the
|
|
expense of slightly higher (1uA) deep sleep current consumption.
|
|
- "External 32kHz oscillator" allows using 32kHz clock generated by an
|
|
external circuit. In this case, external clock signal must be connected
|
|
to 32K_XP pin. Amplitude should be <1.2V in case of sine wave signal,
|
|
and <1V in case of square wave signal. Common mode voltage should be
|
|
0.1 < Vcm < 0.5Vamp, where Vamp is the signal amplitude.
|
|
Additionally, 1nF capacitor must be connected between 32K_XN pin and
|
|
ground. 32K_XN pin can not be used as a GPIO in this case.
|
|
- "Internal 8.5MHz oscillator divided by 256" option results in higher
|
|
deep sleep current (by 5uA) but has better frequency stability than
|
|
the internal 150kHz oscillator. It does not require external components.
|
|
|
|
config ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC
|
|
bool "Internal 150kHz RC oscillator"
|
|
config ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL
|
|
bool "External 32kHz crystal"
|
|
config ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC
|
|
bool "External 32kHz oscillator at 32K_XP pin"
|
|
config ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256
|
|
bool "Internal 8.5MHz oscillator, divided by 256 (~33kHz)"
|
|
endchoice
|
|
|
|
config ESP32_RTC_CLK_CAL_CYCLES
|
|
int "Number of cycles for RTC_SLOW_CLK calibration"
|
|
default 3000 if ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL
|
|
default 1024 if ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC
|
|
range 0 27000 if ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL || ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC || ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256
|
|
range 0 32766 if ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC
|
|
help
|
|
When the startup code initializes RTC_SLOW_CLK, it can perform
|
|
calibration by comparing the RTC_SLOW_CLK frequency with main XTAL
|
|
frequency. This option sets the number of RTC_SLOW_CLK cycles measured
|
|
by the calibration routine. Higher numbers increase calibration
|
|
precision, which may be important for applications which spend a lot of
|
|
time in deep sleep. Lower numbers reduce startup time.
|
|
|
|
When this option is set to 0, clock calibration will not be performed at
|
|
startup, and approximate clock frequencies will be assumed:
|
|
|
|
- 150000 Hz if internal RC oscillator is used as clock source. For this use value 1024.
|
|
- 32768 Hz if the 32k crystal oscillator is used. For this use value 3000 or more.
|
|
In case more value will help improve the definition of the launch of the crystal.
|
|
If the crystal could not start, it will be switched to internal RC.
|
|
|
|
config ESP32_RTC_XTAL_BOOTSTRAP_CYCLES
|
|
int "Bootstrap cycles for external 32kHz crystal"
|
|
depends on ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL
|
|
default 5
|
|
range 0 32768
|
|
help
|
|
To reduce the startup time of an external RTC crystal,
|
|
we bootstrap it with a 32kHz square wave for a fixed number of cycles.
|
|
Setting 0 will disable bootstrapping (if disabled, the crystal may take
|
|
longer to start up or fail to oscillate under some conditions).
|
|
|
|
If this value is too high, a faulty crystal may initially start and then fail.
|
|
If this value is too low, an otherwise good crystal may not start.
|
|
|
|
To accurately determine if the crystal has started,
|
|
set a larger "Number of cycles for RTC_SLOW_CLK calibration" (about 3000).
|
|
|
|
config ESP32_DEEP_SLEEP_WAKEUP_DELAY
|
|
int "Extra delay in deep sleep wake stub (in us)"
|
|
default 2000
|
|
range 0 5000
|
|
help
|
|
When ESP32 exits deep sleep, the CPU and the flash chip are powered on
|
|
at the same time. CPU will run deep sleep stub first, and then
|
|
proceed to load code from flash. Some flash chips need sufficient
|
|
time to pass between power on and first read operation. By default,
|
|
without any extra delay, this time is approximately 900us, although
|
|
some flash chip types need more than that.
|
|
|
|
By default extra delay is set to 2000us. When optimizing startup time
|
|
for applications which require it, this value may be reduced.
|
|
|
|
If you are seeing "flash read err, 1000" message printed to the
|
|
console after deep sleep reset, try increasing this value.
|
|
|
|
choice ESP32_XTAL_FREQ_SEL
|
|
prompt "Main XTAL frequency"
|
|
default ESP32_XTAL_FREQ_40
|
|
help
|
|
ESP32 currently supports the following XTAL frequencies:
|
|
|
|
- 26 MHz
|
|
- 40 MHz
|
|
|
|
Startup code can automatically estimate XTAL frequency. This feature
|
|
uses the internal 8MHz oscillator as a reference. Because the internal
|
|
oscillator frequency is temperature dependent, it is not recommended
|
|
to use automatic XTAL frequency detection in applications which need
|
|
to work at high ambient temperatures and use high-temperature
|
|
qualified chips and modules.
|
|
config ESP32_XTAL_FREQ_40
|
|
bool "40 MHz"
|
|
config ESP32_XTAL_FREQ_26
|
|
bool "26 MHz"
|
|
config ESP32_XTAL_FREQ_AUTO
|
|
bool "Autodetect"
|
|
endchoice
|
|
|
|
# Keep these values in sync with rtc_xtal_freq_t enum in soc/rtc.h
|
|
config ESP32_XTAL_FREQ
|
|
int
|
|
default 0 if ESP32_XTAL_FREQ_AUTO
|
|
default 40 if ESP32_XTAL_FREQ_40
|
|
default 26 if ESP32_XTAL_FREQ_26
|
|
|
|
config DISABLE_BASIC_ROM_CONSOLE
|
|
bool "Permanently disable BASIC ROM Console"
|
|
default n
|
|
help
|
|
If set, the first time the app boots it will disable the BASIC ROM Console
|
|
permanently (by burning an efuse).
|
|
|
|
Otherwise, the BASIC ROM Console starts on reset if no valid bootloader is
|
|
read from the flash.
|
|
|
|
(Enabling secure boot also disables the BASIC ROM Console by default.)
|
|
|
|
config NO_BLOBS
|
|
bool "No Binary Blobs"
|
|
depends on !BT_ENABLED
|
|
default n
|
|
help
|
|
If enabled, this disables the linking of binary libraries in the application build. Note
|
|
that after enabling this Wi-Fi/Bluetooth will not work.
|
|
|
|
config ESP_TIMER_PROFILING
|
|
bool "Enable esp_timer profiling features"
|
|
default n
|
|
help
|
|
If enabled, esp_timer_dump will dump information such as number of times
|
|
the timer was started, number of times the timer has triggered, and the
|
|
total time it took for the callback to run.
|
|
This option has some effect on timer performance and the amount of memory
|
|
used for timer storage, and should only be used for debugging/testing
|
|
purposes.
|
|
|
|
config COMPATIBLE_PRE_V2_1_BOOTLOADERS
|
|
bool "App compatible with bootloaders before IDF v2.1"
|
|
default n
|
|
help
|
|
Bootloaders before IDF v2.1 did less initialisation of the
|
|
system clock. This setting needs to be enabled to build an app
|
|
which can be booted by these older bootloaders.
|
|
|
|
If this setting is enabled, the app can be booted by any bootloader
|
|
from IDF v1.0 up to the current version.
|
|
|
|
If this setting is disabled, the app can only be booted by bootloaders
|
|
from IDF v2.1 or newer.
|
|
|
|
Enabling this setting adds approximately 1KB to the app's IRAM usage.
|
|
|
|
config ESP_ERR_TO_NAME_LOOKUP
|
|
bool "Enable lookup of error code strings"
|
|
default "y"
|
|
help
|
|
Functions esp_err_to_name() and esp_err_to_name_r() return string
|
|
representations of error codes from a pre-generated lookup table.
|
|
This option can be used to turn off the use of the look-up table in
|
|
order to save memory but this comes at the price of sacrificing
|
|
distinguishable (meaningful) output string representations.
|
|
|
|
config ESP32_RTCDATA_IN_FAST_MEM
|
|
bool "Place RTC_DATA_ATTR and RTC_RODATA_ATTR variables into RTC fast memory segment"
|
|
default n
|
|
depends on FREERTOS_UNICORE
|
|
help
|
|
This option allows to place .rtc_data and .rtc_rodata sections into
|
|
RTC fast memory segment to free the slow memory region for ULP programs.
|
|
This option depends on the CONFIG_FREERTOS_UNICORE option because RTC fast memory
|
|
can be accessed only by PRO_CPU core.
|
|
|
|
endmenu # ESP32-Specific
|
|
|
|
menu Wi-Fi
|
|
|
|
config SW_COEXIST_ENABLE
|
|
bool "Software controls WiFi/Bluetooth coexistence"
|
|
depends on BT_ENABLED
|
|
default y
|
|
help
|
|
If enabled, WiFi & Bluetooth coexistence is controlled by software rather than hardware.
|
|
Recommended for heavy traffic scenarios. Both coexistence configuration options are
|
|
automatically managed, no user intervention is required.
|
|
|
|
choice SW_COEXIST_PREFERENCE
|
|
prompt "WiFi/Bluetooth coexistence performance preference"
|
|
depends on SW_COEXIST_ENABLE
|
|
default SW_COEXIST_PREFERENCE_BALANCE
|
|
help
|
|
Choose Bluetooth/WiFi/Balance for different preference.
|
|
If choose WiFi, it will make WiFi performance better. Such, keep WiFi Audio more fluent.
|
|
If choose Bluetooth, it will make Bluetooth performance better. Such, keep Bluetooth(A2DP) Audio more fluent.
|
|
If choose Balance, the performance of WiFi and bluetooth will be balance. It's default. Normally, just choose balance, the A2DP audio can play fluently, too.
|
|
Except config preference in menuconfig, you can also call esp_coex_preference_set() dynamically.
|
|
|
|
config SW_COEXIST_PREFERENCE_WIFI
|
|
bool "WiFi"
|
|
|
|
config SW_COEXIST_PREFERENCE_BT
|
|
bool "Bluetooth(include BR/EDR and BLE)"
|
|
|
|
config SW_COEXIST_PREFERENCE_BALANCE
|
|
bool "Balance"
|
|
|
|
endchoice
|
|
|
|
config SW_COEXIST_PREFERENCE_VALUE
|
|
int
|
|
depends on SW_COEXIST_ENABLE
|
|
default 0 if SW_COEXIST_PREFERENCE_WIFI
|
|
default 1 if SW_COEXIST_PREFERENCE_BT
|
|
default 2 if SW_COEXIST_PREFERENCE_BALANCE
|
|
|
|
config ESP32_WIFI_STATIC_RX_BUFFER_NUM
|
|
int "Max number of WiFi static RX buffers"
|
|
range 2 25
|
|
default 10
|
|
help
|
|
Set the number of WiFi static RX buffers. Each buffer takes approximately 1.6KB of RAM.
|
|
The static rx buffers are allocated when esp_wifi_init is called, they are not freed
|
|
until esp_wifi_deinit is called.
|
|
|
|
WiFi hardware use these buffers to receive all 802.11 frames.
|
|
A higher number may allow higher throughput but increases memory use.
|
|
|
|
config ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM
|
|
int "Max number of WiFi dynamic RX buffers"
|
|
range 0 128
|
|
default 32
|
|
help
|
|
Set the number of WiFi dynamic RX buffers, 0 means unlimited RX buffers will be allocated
|
|
(provided sufficient free RAM). The size of each dynamic RX buffer depends on the size of
|
|
the received data frame.
|
|
|
|
For each received data frame, the WiFi driver makes a copy to an RX buffer and then delivers
|
|
it to the high layer TCP/IP stack. The dynamic RX buffer is freed after the higher layer has
|
|
successfully received the data frame.
|
|
|
|
For some applications, WiFi data frames may be received faster than the application can
|
|
process them. In these cases we may run out of memory if RX buffer number is unlimited (0).
|
|
|
|
If a dynamic RX buffer limit is set, it should be at least the number of static RX buffers.
|
|
|
|
choice ESP32_WIFI_TX_BUFFER
|
|
prompt "Type of WiFi TX buffers"
|
|
default ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
help
|
|
Select type of WiFi TX buffers:
|
|
|
|
If "Static" is selected, WiFi TX buffers are allocated when WiFi is initialized and released
|
|
when WiFi is de-initialized. The size of each static TX buffer is fixed to about 1.6KB.
|
|
|
|
If "Dynamic" is selected, each WiFi TX buffer is allocated as needed when a data frame is
|
|
delivered to the Wifi driver from the TCP/IP stack. The buffer is freed after the data frame
|
|
has been sent by the WiFi driver. The size of each dynamic TX buffer depends on the length
|
|
of each data frame sent by the TCP/IP layer.
|
|
|
|
If PSRAM is enabled, "Static" should be selected to guarantee enough WiFi TX buffers.
|
|
If PSRAM is disabled, "Dynamic" should be selected to improve the utilization of RAM.
|
|
|
|
config ESP32_WIFI_STATIC_TX_BUFFER
|
|
bool "Static"
|
|
config ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
bool "Dynamic"
|
|
depends on !SPIRAM_USE_MALLOC
|
|
endchoice
|
|
|
|
config ESP32_WIFI_TX_BUFFER_TYPE
|
|
int
|
|
default 0 if ESP32_WIFI_STATIC_TX_BUFFER
|
|
default 1 if ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
|
|
config ESP32_WIFI_STATIC_TX_BUFFER_NUM
|
|
int "Max number of WiFi static TX buffers"
|
|
depends on ESP32_WIFI_STATIC_TX_BUFFER
|
|
range 6 64
|
|
default 16
|
|
help
|
|
Set the number of WiFi static TX buffers. Each buffer takes approximately 1.6KB of RAM.
|
|
The static RX buffers are allocated when esp_wifi_init() is called, they are not released
|
|
until esp_wifi_deinit() is called.
|
|
|
|
For each transmitted data frame from the higher layer TCP/IP stack, the WiFi driver makes a
|
|
copy of it in a TX buffer. For some applications especially UDP applications, the upper
|
|
layer can deliver frames faster than WiFi layer can transmit. In these cases, we may run out
|
|
of TX buffers.
|
|
|
|
config ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM
|
|
int "Max number of WiFi dynamic TX buffers"
|
|
depends on ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
range 16 128
|
|
default 32
|
|
help
|
|
Set the number of WiFi dynamic TX buffers. The size of each dynamic TX buffer is not fixed,
|
|
it depends on the size of each transmitted data frame.
|
|
|
|
For each transmitted frame from the higher layer TCP/IP stack, the WiFi driver makes a copy
|
|
of it in a TX buffer. For some applications, especially UDP applications, the upper layer
|
|
can deliver frames faster than WiFi layer can transmit. In these cases, we may run out of TX
|
|
buffers.
|
|
|
|
config ESP32_WIFI_CSI_ENABLED
|
|
bool "WiFi CSI(Channel State Information)"
|
|
default n
|
|
help
|
|
Select this option to enable CSI(Channel State Information) feature. CSI takes about
|
|
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM KB of RAM. If CSI is not used, it is better to disable
|
|
this feature in order to save memory.
|
|
|
|
config ESP32_WIFI_AMPDU_TX_ENABLED
|
|
bool "WiFi AMPDU TX"
|
|
default y
|
|
help
|
|
Select this option to enable AMPDU TX feature
|
|
|
|
|
|
config ESP32_WIFI_TX_BA_WIN
|
|
int "WiFi AMPDU TX BA window size"
|
|
depends on ESP32_WIFI_AMPDU_TX_ENABLED
|
|
range 2 32
|
|
default 6
|
|
help
|
|
Set the size of WiFi Block Ack TX window. Generally a bigger value means higher throughput but
|
|
more memory. Most of time we should NOT change the default value unless special reason, e.g.
|
|
test the maximum UDP TX throughput with iperf etc. For iperf test in shieldbox, the recommended
|
|
value is 9~12.
|
|
|
|
config ESP32_WIFI_AMPDU_RX_ENABLED
|
|
bool "WiFi AMPDU RX"
|
|
default y
|
|
help
|
|
Select this option to enable AMPDU RX feature
|
|
|
|
config ESP32_WIFI_RX_BA_WIN
|
|
int "WiFi AMPDU RX BA window size"
|
|
depends on ESP32_WIFI_AMPDU_RX_ENABLED
|
|
range 2 32
|
|
default 6
|
|
help
|
|
Set the size of WiFi Block Ack RX window. Generally a bigger value means higher throughput but
|
|
more memory. Most of time we should NOT change the default value unless special reason, e.g.
|
|
test the maximum UDP RX throughput with iperf etc. For iperf test in shieldbox, the recommended
|
|
value is 9~12.
|
|
|
|
config ESP32_WIFI_NVS_ENABLED
|
|
bool "WiFi NVS flash"
|
|
default y
|
|
help
|
|
Select this option to enable WiFi NVS flash
|
|
|
|
choice ESP32_WIFI_TASK_CORE_ID
|
|
depends on !FREERTOS_UNICORE
|
|
prompt "WiFi Task Core ID"
|
|
default ESP32_WIFI_TASK_PINNED_TO_CORE_0
|
|
help
|
|
Pinned WiFi task to core 0 or core 1.
|
|
|
|
config ESP32_WIFI_TASK_PINNED_TO_CORE_0
|
|
bool "Core 0"
|
|
config ESP32_WIFI_TASK_PINNED_TO_CORE_1
|
|
bool "Core 1"
|
|
endchoice
|
|
|
|
config ESP32_WIFI_SOFTAP_BEACON_MAX_LEN
|
|
int "Max length of WiFi SoftAP Beacon"
|
|
range 752 1256
|
|
default 752
|
|
help
|
|
ESP-MESH utilizes beacon frames to detect and resolve root node conflicts (see documentation). However the default
|
|
length of a beacon frame can simultaneously hold only five root node identifier structures, meaning that a root node
|
|
conflict of up to five nodes can be detected at one time. In the occurence of more root nodes conflict involving more
|
|
than five root nodes, the conflict resolution process will detect five of the root nodes, resolve the conflict, and
|
|
re-detect more root nodes. This process will repeat until all root node conflicts are resolved. However this process
|
|
can generally take a very long time.
|
|
|
|
To counter this situation, the beacon frame length can be increased such that more root nodes can be detected simultaneously.
|
|
Each additional root node will require 36 bytes and should be added ontop of the default beacon frame length of
|
|
752 bytes. For example, if you want to detect 10 root nodes simultaneously, you need to set the beacon frame length as
|
|
932 (752+36*5).
|
|
|
|
Setting a longer beacon length also assists with debugging as the conflicting root nodes can be identified more quickly.
|
|
|
|
endmenu # Wi-Fi
|
|
|
|
menu PHY
|
|
|
|
config ESP32_PHY_CALIBRATION_AND_DATA_STORAGE
|
|
bool "Store phy calibration data in NVS"
|
|
default y
|
|
help
|
|
If this option is enabled, NVS will be initialized and calibration data will be loaded from there.
|
|
PHY calibration will be skipped on deep sleep wakeup. If calibration data is not found, full calibration
|
|
will be performed and stored in NVS. Normally, only partial calibration will be performed.
|
|
If this option is disabled, full calibration will be performed.
|
|
|
|
If it's easy that your board calibrate bad data, choose 'n'.
|
|
Two cases for example, you should choose 'n':
|
|
1.If your board is easy to be booted up with antenna disconnected.
|
|
2.Because of your board design, each time when you do calibration, the result are too unstable.
|
|
If unsure, choose 'y'.
|
|
|
|
config ESP32_PHY_INIT_DATA_IN_PARTITION
|
|
bool "Use a partition to store PHY init data"
|
|
default n
|
|
help
|
|
If enabled, PHY init data will be loaded from a partition.
|
|
When using a custom partition table, make sure that PHY data
|
|
partition is included (type: 'data', subtype: 'phy').
|
|
With default partition tables, this is done automatically.
|
|
If PHY init data is stored in a partition, it has to be flashed there,
|
|
otherwise runtime error will occur.
|
|
|
|
If this option is not enabled, PHY init data will be embedded
|
|
into the application binary.
|
|
|
|
If unsure, choose 'n'.
|
|
|
|
config ESP32_PHY_MAX_WIFI_TX_POWER
|
|
int "Max WiFi TX power (dBm)"
|
|
range 0 20
|
|
default 20
|
|
help
|
|
Set maximum transmit power for WiFi radio. Actual transmit power for high
|
|
data rates may be lower than this setting.
|
|
|
|
config ESP32_PHY_MAX_TX_POWER
|
|
int
|
|
default ESP32_PHY_MAX_WIFI_TX_POWER
|
|
|
|
endmenu # PHY
|
|
|
|
|
|
menu "Power Management"
|
|
|
|
config PM_ENABLE
|
|
bool "Support for power management"
|
|
default n
|
|
help
|
|
If enabled, application is compiled with support for power management.
|
|
This option has run-time overhead (increased interrupt latency,
|
|
longer time to enter idle state), and it also reduces accuracy of
|
|
RTOS ticks and timers used for timekeeping.
|
|
Enable this option if application uses power management APIs.
|
|
|
|
config PM_DFS_INIT_AUTO
|
|
bool "Enable dynamic frequency scaling (DFS) at startup"
|
|
depends on PM_ENABLE
|
|
default n
|
|
help
|
|
If enabled, startup code configures dynamic frequency scaling.
|
|
Max CPU frequency is set to CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ setting,
|
|
min frequency is set to XTAL frequency.
|
|
If disabled, DFS will not be active until the application
|
|
configures it using esp_pm_configure function.
|
|
|
|
config PM_USE_RTC_TIMER_REF
|
|
bool "Use RTC timer to prevent time drift (EXPERIMENTAL)"
|
|
depends on PM_ENABLE && (ESP32_TIME_SYSCALL_USE_RTC || ESP32_TIME_SYSCALL_USE_RTC_FRC1)
|
|
default n
|
|
help
|
|
When APB clock frequency changes, high-resolution timer (esp_timer)
|
|
scale and base value need to be adjusted. Each adjustment may cause
|
|
small error, and over time such small errors may cause time drift.
|
|
If this option is enabled, RTC timer will be used as a reference to
|
|
compensate for the drift.
|
|
It is recommended that this option is only used if 32k XTAL is selected
|
|
as RTC clock source.
|
|
|
|
config PM_PROFILING
|
|
bool "Enable profiling counters for PM locks"
|
|
depends on PM_ENABLE
|
|
default n
|
|
help
|
|
If enabled, esp_pm_* functions will keep track of the amount of time
|
|
each of the power management locks has been held, and esp_pm_dump_locks
|
|
function will print this information.
|
|
This feature can be used to analyze which locks are preventing the chip
|
|
from going into a lower power state, and see what time the chip spends
|
|
in each power saving mode. This feature does incur some run-time
|
|
overhead, so should typically be disabled in production builds.
|
|
|
|
config PM_TRACE
|
|
bool "Enable debug tracing of PM using GPIOs"
|
|
depends on PM_ENABLE
|
|
default n
|
|
help
|
|
If enabled, some GPIOs will be used to signal events such as RTOS ticks,
|
|
frequency switching, entry/exit from idle state. Refer to pm_trace.c
|
|
file for the list of GPIOs.
|
|
This feature is intended to be used when analyzing/debugging behavior
|
|
of power management implementation, and should be kept disabled in
|
|
applications.
|
|
|
|
|
|
endmenu # "Power Management"
|