check master read write functions with array of registers) fix master serial processing code and modbus controller to work with register array modbus_master: add reading and writing of test value array (58 registers) to check failure is gone remove parameter temporary buffer from modbus controller to allow more than 24 byte writes driver: fix issue with TOUT feature driver: fix uart_rx_timeout issue driver: fix issue with rxfifo_tout_int_raw not triggered when received fifo_len = 120 byte and all bytes read out of fifo as result of rxfifo_full_int_raw driver: add function uart_internal_set_always_rx_timeout() to always handle tout interrupt examples: call uart_internal_set_always_rx_timeout() to handle tout interrupt correctly examples: update examples to use tout feature driver: reflect changes of uart_set_always_rx_timeout() function, change uart.c driver: change conditions to trigger workaround for tout feature in uart.c driver: change uart_set_always_rx_timeout() freemodbus: fix tabs, remove commented code driver: remove uart_ll_is_rx_idle()
455 lines
18 KiB
C
455 lines
18 KiB
C
/*
|
|
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
|
|
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* File: $Id: mbfuncholding_m.c,v 1.60 2013/09/02 14:13:40 Armink Add Master Functions Exp $
|
|
*/
|
|
|
|
/* ----------------------- System includes ----------------------------------*/
|
|
#include "stdlib.h"
|
|
#include "string.h"
|
|
|
|
/* ----------------------- Platform includes --------------------------------*/
|
|
#include "port.h"
|
|
|
|
/* ----------------------- Modbus includes ----------------------------------*/
|
|
//#include "mb.h"
|
|
#include "mb_m.h"
|
|
#include "mbframe.h"
|
|
#include "mbproto.h"
|
|
#include "mbconfig.h"
|
|
|
|
/* ----------------------- Defines ------------------------------------------*/
|
|
#define MB_PDU_REQ_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
|
#define MB_PDU_REQ_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
|
#define MB_PDU_REQ_READ_SIZE ( 4 )
|
|
#define MB_PDU_FUNC_READ_REGCNT_MAX ( 0x007D )
|
|
#define MB_PDU_FUNC_READ_BYTECNT_OFF ( MB_PDU_DATA_OFF + 0 )
|
|
#define MB_PDU_FUNC_READ_VALUES_OFF ( MB_PDU_DATA_OFF + 1 )
|
|
#define MB_PDU_FUNC_READ_SIZE_MIN ( 1 )
|
|
|
|
#define MB_PDU_REQ_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 0)
|
|
#define MB_PDU_REQ_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
|
|
#define MB_PDU_REQ_WRITE_SIZE ( 4 )
|
|
#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 0)
|
|
#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
|
|
#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
|
|
|
|
#define MB_PDU_REQ_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
|
#define MB_PDU_REQ_WRITE_MUL_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
|
#define MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
|
|
#define MB_PDU_REQ_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
|
|
#define MB_PDU_REQ_WRITE_MUL_SIZE_MIN ( 5 )
|
|
#define MB_PDU_REQ_WRITE_MUL_REGCNT_MAX ( 0x0078 )
|
|
#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
|
#define MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
|
#define MB_PDU_FUNC_WRITE_MUL_SIZE ( 4 )
|
|
|
|
#define MB_PDU_REQ_READWRITE_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
|
|
#define MB_PDU_REQ_READWRITE_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
|
|
#define MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 4 )
|
|
#define MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF ( MB_PDU_DATA_OFF + 6 )
|
|
#define MB_PDU_REQ_READWRITE_WRITE_BYTECNT_OFF ( MB_PDU_DATA_OFF + 8 )
|
|
#define MB_PDU_REQ_READWRITE_WRITE_VALUES_OFF ( MB_PDU_DATA_OFF + 9 )
|
|
#define MB_PDU_REQ_READWRITE_SIZE_MIN ( 9 )
|
|
#define MB_PDU_FUNC_READWRITE_READ_BYTECNT_OFF ( MB_PDU_DATA_OFF + 0 )
|
|
#define MB_PDU_FUNC_READWRITE_READ_VALUES_OFF ( MB_PDU_DATA_OFF + 1 )
|
|
#define MB_PDU_FUNC_READWRITE_SIZE_MIN ( 1 )
|
|
|
|
/* ----------------------- Static functions ---------------------------------*/
|
|
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
|
|
|
|
/* ----------------------- Start implementation -----------------------------*/
|
|
#if MB_MASTER_RTU_ENABLED || MB_MASTER_ASCII_ENABLED
|
|
|
|
#if MB_FUNC_WRITE_HOLDING_ENABLED
|
|
|
|
/**
|
|
* This function will request write holding register.
|
|
*
|
|
* @param ucSndAddr salve address
|
|
* @param usRegAddr register start address
|
|
* @param usRegData register data to be written
|
|
* @param lTimeOut timeout (-1 will waiting forever)
|
|
*
|
|
* @return error code
|
|
*/
|
|
eMBMasterReqErrCode
|
|
eMBMasterReqWriteHoldingRegister( UCHAR ucSndAddr, USHORT usRegAddr, USHORT usRegData, LONG lTimeOut )
|
|
{
|
|
UCHAR *ucMBFrame;
|
|
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
|
|
|
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
|
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
|
else
|
|
{
|
|
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
|
vMBMasterSetDestAddress(ucSndAddr);
|
|
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_WRITE_REGISTER;
|
|
ucMBFrame[MB_PDU_REQ_WRITE_ADDR_OFF] = usRegAddr >> 8;
|
|
ucMBFrame[MB_PDU_REQ_WRITE_ADDR_OFF + 1] = usRegAddr;
|
|
ucMBFrame[MB_PDU_REQ_WRITE_VALUE_OFF] = usRegData >> 8;
|
|
ucMBFrame[MB_PDU_REQ_WRITE_VALUE_OFF + 1] = usRegData ;
|
|
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_WRITE_SIZE );
|
|
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_TRANSMIT );
|
|
eErrStatus = eMBMasterWaitRequestFinish( );
|
|
}
|
|
return eErrStatus;
|
|
}
|
|
|
|
eMBException
|
|
eMBMasterFuncWriteHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
|
{
|
|
USHORT usRegAddress;
|
|
eMBException eStatus = MB_EX_NONE;
|
|
eMBErrorCode eRegStatus;
|
|
|
|
if( *usLen == ( MB_PDU_SIZE_MIN + MB_PDU_FUNC_WRITE_SIZE ) )
|
|
{
|
|
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
|
|
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
|
|
usRegAddress++;
|
|
|
|
/* Make callback to update the value. */
|
|
eRegStatus = eMBMasterRegHoldingCB( &pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF],
|
|
usRegAddress, 1, MB_REG_WRITE );
|
|
|
|
/* If an error occured convert it into a Modbus exception. */
|
|
if( eRegStatus != MB_ENOERR )
|
|
{
|
|
eStatus = prveMBError2Exception( eRegStatus );
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Can't be a valid request because the length is incorrect. */
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
return eStatus;
|
|
}
|
|
#endif
|
|
|
|
#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
|
|
|
|
/**
|
|
* This function will request write multiple holding register.
|
|
*
|
|
* @param ucSndAddr salve address
|
|
* @param usRegAddr register start address
|
|
* @param usNRegs register total number
|
|
* @param pusDataBuffer data to be written
|
|
* @param lTimeOut timeout (-1 will waiting forever)
|
|
*
|
|
* @return error code
|
|
*/
|
|
eMBMasterReqErrCode
|
|
eMBMasterReqWriteMultipleHoldingRegister( UCHAR ucSndAddr,
|
|
USHORT usRegAddr, USHORT usNRegs, USHORT * pusDataBuffer, LONG lTimeOut )
|
|
{
|
|
UCHAR *ucMBFrame;
|
|
USHORT usRegIndex = 0;
|
|
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
|
|
|
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
|
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
|
else
|
|
{
|
|
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
|
vMBMasterSetDestAddress(ucSndAddr);
|
|
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_WRITE_MULTIPLE_REGISTERS;
|
|
ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF] = usRegAddr >> 8;
|
|
ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF + 1] = usRegAddr;
|
|
ucMBFrame[MB_PDU_REQ_WRITE_MUL_REGCNT_OFF] = usNRegs >> 8;
|
|
ucMBFrame[MB_PDU_REQ_WRITE_MUL_REGCNT_OFF + 1] = usNRegs ;
|
|
ucMBFrame[MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF] = usNRegs * 2;
|
|
ucMBFrame += MB_PDU_REQ_WRITE_MUL_VALUES_OFF;
|
|
while( usNRegs > usRegIndex)
|
|
{
|
|
*ucMBFrame++ = pusDataBuffer[usRegIndex] >> 8;
|
|
*ucMBFrame++ = pusDataBuffer[usRegIndex++] ;
|
|
}
|
|
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_WRITE_MUL_SIZE_MIN + 2*usNRegs );
|
|
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_TRANSMIT );
|
|
eErrStatus = eMBMasterWaitRequestFinish( );
|
|
}
|
|
return eErrStatus;
|
|
}
|
|
|
|
eMBException
|
|
eMBMasterFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
|
{
|
|
UCHAR *ucMBFrame;
|
|
USHORT usRegAddress;
|
|
USHORT usRegCount;
|
|
UCHAR ucRegByteCount;
|
|
|
|
eMBException eStatus = MB_EX_NONE;
|
|
eMBErrorCode eRegStatus;
|
|
|
|
/* If this request is broadcast, the *usLen is not need check. */
|
|
if( ( *usLen == MB_PDU_SIZE_MIN + MB_PDU_FUNC_WRITE_MUL_SIZE ) || xMBMasterRequestIsBroadcast() )
|
|
{
|
|
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
|
usRegAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF] << 8 );
|
|
usRegAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_WRITE_MUL_ADDR_OFF + 1] );
|
|
usRegAddress++;
|
|
|
|
usRegCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_WRITE_MUL_REGCNT_OFF] << 8 );
|
|
usRegCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_WRITE_MUL_REGCNT_OFF + 1] );
|
|
|
|
ucRegByteCount = ucMBFrame[MB_PDU_REQ_WRITE_MUL_BYTECNT_OFF];
|
|
|
|
if( ucRegByteCount == 2 * usRegCount )
|
|
{
|
|
/* Make callback to update the register values. */
|
|
eRegStatus = eMBMasterRegHoldingCB( &ucMBFrame[MB_PDU_REQ_WRITE_MUL_VALUES_OFF],
|
|
usRegAddress, usRegCount, MB_REG_WRITE );
|
|
|
|
/* If an error occured convert it into a Modbus exception. */
|
|
if( eRegStatus != MB_ENOERR )
|
|
{
|
|
eStatus = prveMBError2Exception( eRegStatus );
|
|
}
|
|
}
|
|
else
|
|
{
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Can't be a valid request because the length is incorrect. */
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
return eStatus;
|
|
}
|
|
#endif
|
|
|
|
#if MB_FUNC_READ_HOLDING_ENABLED > 0
|
|
|
|
/**
|
|
* This function will request read holding register.
|
|
*
|
|
* @param ucSndAddr salve address
|
|
* @param usRegAddr register start address
|
|
* @param usNRegs register total number
|
|
* @param lTimeOut timeout (-1 will waiting forever)
|
|
*
|
|
* @return error code
|
|
*/
|
|
eMBMasterReqErrCode
|
|
eMBMasterReqReadHoldingRegister( UCHAR ucSndAddr, USHORT usRegAddr, USHORT usNRegs, LONG lTimeOut )
|
|
{
|
|
UCHAR *ucMBFrame;
|
|
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
|
|
|
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
|
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
|
else
|
|
{
|
|
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
|
vMBMasterSetDestAddress(ucSndAddr);
|
|
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_READ_HOLDING_REGISTER;
|
|
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] = usRegAddr >> 8;
|
|
ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] = usRegAddr;
|
|
ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF] = usNRegs >> 8;
|
|
ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF + 1] = usNRegs;
|
|
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_READ_SIZE );
|
|
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_TRANSMIT );
|
|
eErrStatus = eMBMasterWaitRequestFinish( );
|
|
}
|
|
return eErrStatus;
|
|
}
|
|
|
|
eMBException
|
|
eMBMasterFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
|
{
|
|
UCHAR *ucMBFrame;
|
|
USHORT usRegAddress;
|
|
USHORT usRegCount;
|
|
|
|
eMBException eStatus = MB_EX_NONE;
|
|
eMBErrorCode eRegStatus;
|
|
|
|
/* If this request is broadcast, and it's read mode. This request don't need execute. */
|
|
if ( xMBMasterRequestIsBroadcast() )
|
|
{
|
|
eStatus = MB_EX_NONE;
|
|
}
|
|
else if( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READ_SIZE_MIN )
|
|
{
|
|
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
|
usRegAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF] << 8 );
|
|
usRegAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_ADDR_OFF + 1] );
|
|
usRegAddress++;
|
|
|
|
usRegCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF] << 8 );
|
|
usRegCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READ_REGCNT_OFF + 1] );
|
|
|
|
/* Check if the number of registers to read is valid. If not
|
|
* return Modbus illegal data value exception.
|
|
*/
|
|
if( ( usRegCount >= 1 ) && ( 2 * usRegCount == pucFrame[MB_PDU_FUNC_READ_BYTECNT_OFF] ) )
|
|
{
|
|
/* Make callback to fill the buffer. */
|
|
eRegStatus = eMBMasterRegHoldingCB( &pucFrame[MB_PDU_FUNC_READ_VALUES_OFF], usRegAddress, usRegCount, MB_REG_READ );
|
|
/* If an error occured convert it into a Modbus exception. */
|
|
if( eRegStatus != MB_ENOERR )
|
|
{
|
|
eStatus = prveMBError2Exception( eRegStatus );
|
|
}
|
|
}
|
|
else
|
|
{
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Can't be a valid request because the length is incorrect. */
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
return eStatus;
|
|
}
|
|
|
|
#endif
|
|
|
|
#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
|
|
|
|
/**
|
|
* This function will request read and write holding register.
|
|
*
|
|
* @param ucSndAddr salve address
|
|
* @param usReadRegAddr read register start address
|
|
* @param usNReadRegs read register total number
|
|
* @param pusDataBuffer data to be written
|
|
* @param usWriteRegAddr write register start address
|
|
* @param usNWriteRegs write register total number
|
|
* @param lTimeOut timeout (-1 will waiting forever)
|
|
*
|
|
* @return error code
|
|
*/
|
|
eMBMasterReqErrCode
|
|
eMBMasterReqReadWriteMultipleHoldingRegister( UCHAR ucSndAddr,
|
|
USHORT usReadRegAddr, USHORT usNReadRegs, USHORT * pusDataBuffer,
|
|
USHORT usWriteRegAddr, USHORT usNWriteRegs, LONG lTimeOut )
|
|
{
|
|
UCHAR *ucMBFrame;
|
|
USHORT usRegIndex = 0;
|
|
eMBMasterReqErrCode eErrStatus = MB_MRE_NO_ERR;
|
|
|
|
if ( ucSndAddr > MB_MASTER_TOTAL_SLAVE_NUM ) eErrStatus = MB_MRE_ILL_ARG;
|
|
else if ( xMBMasterRunResTake( lTimeOut ) == FALSE ) eErrStatus = MB_MRE_MASTER_BUSY;
|
|
else
|
|
{
|
|
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
|
vMBMasterSetDestAddress(ucSndAddr);
|
|
ucMBFrame[MB_PDU_FUNC_OFF] = MB_FUNC_READWRITE_MULTIPLE_REGISTERS;
|
|
ucMBFrame[MB_PDU_REQ_READWRITE_READ_ADDR_OFF] = usReadRegAddr >> 8;
|
|
ucMBFrame[MB_PDU_REQ_READWRITE_READ_ADDR_OFF + 1] = usReadRegAddr;
|
|
ucMBFrame[MB_PDU_REQ_READWRITE_READ_REGCNT_OFF] = usNReadRegs >> 8;
|
|
ucMBFrame[MB_PDU_REQ_READWRITE_READ_REGCNT_OFF + 1] = usNReadRegs ;
|
|
ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF] = usWriteRegAddr >> 8;
|
|
ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF + 1] = usWriteRegAddr;
|
|
ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF] = usNWriteRegs >> 8;
|
|
ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF + 1] = usNWriteRegs ;
|
|
ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_BYTECNT_OFF] = usNWriteRegs * 2;
|
|
ucMBFrame += MB_PDU_REQ_READWRITE_WRITE_VALUES_OFF;
|
|
while( usNWriteRegs > usRegIndex)
|
|
{
|
|
*ucMBFrame++ = pusDataBuffer[usRegIndex] >> 8;
|
|
*ucMBFrame++ = pusDataBuffer[usRegIndex++] ;
|
|
}
|
|
vMBMasterSetPDUSndLength( MB_PDU_SIZE_MIN + MB_PDU_REQ_READWRITE_SIZE_MIN + 2*usNWriteRegs );
|
|
( void ) xMBMasterPortEventPost( EV_MASTER_FRAME_TRANSMIT );
|
|
eErrStatus = eMBMasterWaitRequestFinish( );
|
|
}
|
|
return eErrStatus;
|
|
}
|
|
|
|
eMBException
|
|
eMBMasterFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
|
|
{
|
|
USHORT usRegReadAddress;
|
|
USHORT usRegReadCount;
|
|
USHORT usRegWriteAddress;
|
|
USHORT usRegWriteCount;
|
|
UCHAR *ucMBFrame;
|
|
|
|
eMBException eStatus = MB_EX_NONE;
|
|
eMBErrorCode eRegStatus;
|
|
|
|
/* If this request is broadcast, and it's read mode. This request don't need execute. */
|
|
if ( xMBMasterRequestIsBroadcast() )
|
|
{
|
|
eStatus = MB_EX_NONE;
|
|
}
|
|
else if( *usLen >= MB_PDU_SIZE_MIN + MB_PDU_FUNC_READWRITE_SIZE_MIN )
|
|
{
|
|
vMBMasterGetPDUSndBuf(&ucMBFrame);
|
|
usRegReadAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_ADDR_OFF] << 8U );
|
|
usRegReadAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_ADDR_OFF + 1] );
|
|
usRegReadAddress++;
|
|
|
|
usRegReadCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_REGCNT_OFF] << 8U );
|
|
usRegReadCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_READ_REGCNT_OFF + 1] );
|
|
|
|
usRegWriteAddress = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF] << 8U );
|
|
usRegWriteAddress |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_ADDR_OFF + 1] );
|
|
usRegWriteAddress++;
|
|
|
|
usRegWriteCount = ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF] << 8U );
|
|
usRegWriteCount |= ( USHORT )( ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_REGCNT_OFF + 1] );
|
|
|
|
if( ( 2 * usRegReadCount ) == pucFrame[MB_PDU_FUNC_READWRITE_READ_BYTECNT_OFF] )
|
|
{
|
|
/* Make callback to update the register values. */
|
|
eRegStatus = eMBMasterRegHoldingCB( &ucMBFrame[MB_PDU_REQ_READWRITE_WRITE_VALUES_OFF],
|
|
usRegWriteAddress, usRegWriteCount, MB_REG_WRITE );
|
|
|
|
if( eRegStatus == MB_ENOERR )
|
|
{
|
|
/* Make the read callback. */
|
|
eRegStatus = eMBMasterRegHoldingCB(&pucFrame[MB_PDU_FUNC_READWRITE_READ_VALUES_OFF],
|
|
usRegReadAddress, usRegReadCount, MB_REG_READ);
|
|
}
|
|
if( eRegStatus != MB_ENOERR )
|
|
{
|
|
eStatus = prveMBError2Exception( eRegStatus );
|
|
}
|
|
}
|
|
else
|
|
{
|
|
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
|
|
}
|
|
}
|
|
return eStatus;
|
|
}
|
|
|
|
#endif
|
|
#endif // #if MB_MASTER_RTU_ENABLED > 0 || MB_MASTER_ASCII_ENABLED > 0
|
|
|