113 lines
2.8 KiB
C
113 lines
2.8 KiB
C
/* ethernet Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
|
|
#include "esp_system.h"
|
|
#include "esp_err.h"
|
|
#include "esp_event_loop.h"
|
|
#include "esp_event.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_log.h"
|
|
#include "esp_eth.h"
|
|
|
|
#include "rom/ets_sys.h"
|
|
#include "rom/gpio.h"
|
|
|
|
#include "soc/dport_reg.h"
|
|
#include "soc/io_mux_reg.h"
|
|
#include "soc/rtc_cntl_reg.h"
|
|
#include "soc/gpio_reg.h"
|
|
#include "soc/gpio_sig_map.h"
|
|
|
|
#include "tcpip_adapter.h"
|
|
#include "nvs_flash.h"
|
|
#include "driver/gpio.h"
|
|
|
|
static const char *TAG = "eth_demo";
|
|
|
|
void phy_tlk110_init(void)
|
|
{
|
|
esp_eth_smi_write(0x1f, 0x8000);
|
|
ets_delay_us(20000);
|
|
|
|
while (esp_eth_smi_read(0x2) != 0x2000) {
|
|
}
|
|
|
|
esp_eth_smi_write(0x9, 0x7400);
|
|
esp_eth_smi_write(0x9, 0xf400);
|
|
ets_delay_us(20000);
|
|
}
|
|
|
|
void eth_gpio_config_rmii(void)
|
|
{
|
|
//txd0 to gpio19 ,can not change
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO19_U, 5);
|
|
//rx_en to gpio21 ,can not change
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO21_U, 5);
|
|
//txd1 to gpio22 , can not change
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO22_U, 5);
|
|
//rxd0 to gpio25 , can not change
|
|
gpio_set_direction(25, GPIO_MODE_INPUT);
|
|
//rxd1 to gpio26 ,can not change
|
|
gpio_set_direction(26, GPIO_MODE_INPUT);
|
|
//rmii clk ,can not change
|
|
gpio_set_direction(0, GPIO_MODE_INPUT);
|
|
|
|
//mdc to gpio4
|
|
gpio_matrix_out(4, EMAC_MDC_O_IDX, 0, 0);
|
|
//mdio to gpio2
|
|
gpio_matrix_out(2, EMAC_MDO_O_IDX, 0, 0);
|
|
gpio_matrix_in(2, EMAC_MDI_I_IDX, 0);
|
|
}
|
|
|
|
void eth_task(void *pvParameter)
|
|
{
|
|
tcpip_adapter_ip_info_t ip;
|
|
memset(&ip, 0, sizeof(tcpip_adapter_ip_info_t));
|
|
vTaskDelay(2000 / portTICK_RATE_MS);
|
|
|
|
while (1) {
|
|
|
|
vTaskDelay(2000 / portTICK_RATE_MS);
|
|
|
|
if (tcpip_adapter_get_ip_info(ESP_IF_ETH, &ip) == 0) {
|
|
ESP_LOGI(TAG, "\n~~~~~~~~~~~\n");
|
|
ESP_LOGI(TAG, "ETHIP:"IPSTR, IP2STR(&ip.ip));
|
|
ESP_LOGI(TAG, "ETHPMASK:"IPSTR, IP2STR(&ip.netmask));
|
|
ESP_LOGI(TAG, "ETHPGW:"IPSTR, IP2STR(&ip.gw));
|
|
ESP_LOGI(TAG, "\n~~~~~~~~~~~\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
void app_main()
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
tcpip_adapter_init();
|
|
esp_event_loop_init(NULL, NULL);
|
|
|
|
eth_config_t config;
|
|
config.phy_addr = PHY31;
|
|
config.mac_mode = ETH_MODE_RMII;
|
|
config.phy_init = phy_tlk110_init;
|
|
config.gpio_config = eth_gpio_config_rmii;
|
|
config.tcpip_input = tcpip_adapter_eth_input;
|
|
|
|
ret = esp_eth_init(&config);
|
|
if(ret == ESP_OK) {
|
|
esp_eth_enable();
|
|
xTaskCreate(eth_task, "eth_task", 2048, NULL, (tskIDLE_PRIORITY + 2), NULL);
|
|
}
|
|
|
|
}
|