OVMS3-idf/components/bootloader_support/include_priv/bootloader_flash.h
Ivan Grokhotkov 205c484c49 bootloader: account for load address when mapping cache pages
Bootloader used to calculate the number of cache pages assuming that
load address was aligned, while in reality load address for DROM and
IROM was offset by 0x20 bytes from the start of 64kB page. This
caused the bootloader to map one less page if the size of the image
was 0x4..0x1c less than a multiple of 64kB.

Reported in https://esp32.com/viewtopic.php?f=13&t=6952.
2019-01-23 17:06:11 +08:00

120 lines
4 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __BOOTLOADER_FLASH_H
#define __BOOTLOADER_FLASH_H
#include <stddef.h>
#include <stdbool.h>
#include <stdint.h>
#include <esp_err.h>
#include "esp_spi_flash.h"
#define FLASH_SECTOR_SIZE 0x1000
/* Provide a Flash API for bootloader_support code,
that can be used from bootloader or app code.
This header is available to source code in the bootloader &
bootloader_support components only.
*/
/**
* @brief Map a region of flash to data memory
*
* @important In bootloader code, only one region can be bootloader_mmaped at once. The previous region must be bootloader_munmapped before another region is mapped.
*
* @important In app code, these functions are not thread safe.
*
* Call bootloader_munmap once for each successful call to bootloader_mmap.
*
* In esp-idf app, this function maps directly to spi_flash_mmap.
*
* @param offset - Starting flash offset to map to memory.
* @param length - Length of data to map.
*
* @return Pointer to mapped data memory (at src_addr), or NULL
* if an allocation error occured.
*/
const void *bootloader_mmap(uint32_t src_addr, uint32_t size);
/**
* @brief Unmap a previously mapped region of flash
*
* Call bootloader_munmap once for each successful call to bootloader_mmap.
*/
void bootloader_munmap(const void *mapping);
/**
* @brief Read data from Flash.
*
*
* @note All of src, dest and size have to be 4-byte aligned.
*
* @param src source address of the data in Flash.
* @param dest pointer to the destination buffer
* @param size length of data
* @param allow_decrypt If true and flash encryption is enabled, data on flash
* will be decrypted transparently as part of the read.
*
* @return ESP_OK on success, ESP_ERR_FLASH_OP_FAIL on SPI failure,
* ESP_ERR_FLASH_OP_TIMEOUT on SPI timeout.
*/
esp_err_t bootloader_flash_read(size_t src_addr, void *dest, size_t size, bool allow_decrypt);
/**
* @brief Write data to Flash.
*
* @note All of dest_addr, src and size have to be 4-byte aligned. If write_encrypted is set, dest_addr and size must be 32-byte aligned.
*
* Note: In bootloader, when write_encrypted == true, the src buffer is encrypted in place.
*
* @param dest_addr Destination address to write in Flash.
* @param src Pointer to the data to write to flash
* @param size Length of data in bytes.
* @param write_encrypted If true, data will be written encrypted on flash.
*
* @return ESP_OK on success, ESP_ERR_FLASH_OP_FAIL on SPI failure,
* ESP_ERR_FLASH_OP_TIMEOUT on SPI timeout.
*/
esp_err_t bootloader_flash_write(size_t dest_addr, void *src, size_t size, bool write_encrypted);
/**
* @brief Erase the Flash sector.
*
* @param sector Sector number, the count starts at sector 0, 4KB per sector.
*
* @return esp_err_t
*/
esp_err_t bootloader_flash_erase_sector(size_t sector);
/* Cache MMU block size */
#define MMU_BLOCK_SIZE 0x00010000
/* Cache MMU address mask (MMU tables ignore bits which are zero) */
#define MMU_FLASH_MASK (~(MMU_BLOCK_SIZE - 1))
/**
* @brief Calculate the number of cache pages to map
* @param size size of data to map
* @param vaddr virtual address where data will be mapped
* @return number of cache MMU pages required to do the mapping
*/
static inline uint32_t bootloader_cache_pages_to_map(uint32_t size, uint32_t vaddr)
{
return (size + (vaddr - (vaddr & MMU_FLASH_MASK)) + MMU_BLOCK_SIZE - 1) / MMU_BLOCK_SIZE;
}
#endif