142f69448f
Also reduce the number of eFuse write cycles during first boot when Secure Boot and/or Flash Encryption are enabled.
702 lines
32 KiB
Text
702 lines
32 KiB
Text
menu "Bootloader config"
|
|
|
|
choice BOOTLOADER_COMPILER_OPTIMIZATION
|
|
prompt "Bootloader optimization Level"
|
|
default BOOTLOADER_COMPILER_OPTIMIZATION_SIZE
|
|
help
|
|
This option sets compiler optimization level (gcc -O argument)
|
|
for the bootloader.
|
|
|
|
- The default "Size" setting will add the -0s flag to CFLAGS.
|
|
- The "Debug" setting will add the -Og flag to CFLAGS.
|
|
- The "Performance" setting will add the -O2 flag to CFLAGS.
|
|
- The "None" setting will add the -O0 flag to CFLAGS.
|
|
|
|
Note that custom optimization levels may be unsupported.
|
|
|
|
config BOOTLOADER_COMPILER_OPTIMIZATION_SIZE
|
|
bool "Size (-Os)"
|
|
config BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG
|
|
bool "Debug (-Og)"
|
|
config BOOTLOADER_COMPILER_OPTIMIZATION_PERF
|
|
bool "Optimize for performance (-O2)"
|
|
config BOOTLOADER_COMPILER_OPTIMIZATION_NONE
|
|
bool "Debug without optimization (-O0)"
|
|
endchoice
|
|
|
|
choice BOOTLOADER_LOG_LEVEL
|
|
bool "Bootloader log verbosity"
|
|
default BOOTLOADER_LOG_LEVEL_INFO
|
|
help
|
|
Specify how much output to see in bootloader logs.
|
|
|
|
config BOOTLOADER_LOG_LEVEL_NONE
|
|
bool "No output"
|
|
config BOOTLOADER_LOG_LEVEL_ERROR
|
|
bool "Error"
|
|
config BOOTLOADER_LOG_LEVEL_WARN
|
|
bool "Warning"
|
|
config BOOTLOADER_LOG_LEVEL_INFO
|
|
bool "Info"
|
|
config BOOTLOADER_LOG_LEVEL_DEBUG
|
|
bool "Debug"
|
|
config BOOTLOADER_LOG_LEVEL_VERBOSE
|
|
bool "Verbose"
|
|
endchoice
|
|
|
|
config BOOTLOADER_LOG_LEVEL
|
|
int
|
|
default 0 if BOOTLOADER_LOG_LEVEL_NONE
|
|
default 1 if BOOTLOADER_LOG_LEVEL_ERROR
|
|
default 2 if BOOTLOADER_LOG_LEVEL_WARN
|
|
default 3 if BOOTLOADER_LOG_LEVEL_INFO
|
|
default 4 if BOOTLOADER_LOG_LEVEL_DEBUG
|
|
default 5 if BOOTLOADER_LOG_LEVEL_VERBOSE
|
|
|
|
config BOOTLOADER_SPI_WP_PIN
|
|
int "SPI Flash WP Pin when customising pins via eFuse (read help)"
|
|
range 0 33
|
|
default 7
|
|
depends on ESPTOOLPY_FLASHMODE_QIO || ESPTOOLPY_FLASHMODE_QOUT
|
|
help
|
|
This value is ignored unless flash mode is set to QIO or QOUT *and* the SPI flash pins have been
|
|
overriden by setting the eFuses SPI_PAD_CONFIG_xxx.
|
|
|
|
When this is the case, the eFuse config only defines 3 of the 4 Quad I/O data pins. The WP pin (aka ESP32
|
|
pin "SD_DATA_3" or SPI flash pin "IO2") is not specified in eFuse. That pin number is compiled into the
|
|
bootloader instead.
|
|
|
|
The default value (GPIO 7) is correct for WP pin on ESP32-D2WD integrated flash.
|
|
|
|
choice BOOTLOADER_VDDSDIO_BOOST
|
|
bool "VDDSDIO LDO voltage"
|
|
default BOOTLOADER_VDDSDIO_BOOST_1_9V
|
|
help
|
|
If this option is enabled, and VDDSDIO LDO is set to 1.8V (using eFuse
|
|
or MTDI bootstrapping pin), bootloader will change LDO settings to
|
|
output 1.9V instead. This helps prevent flash chip from browning out
|
|
during flash programming operations.
|
|
|
|
This option has no effect if VDDSDIO is set to 3.3V, or if the internal
|
|
VDDSDIO regulator is disabled via eFuse.
|
|
|
|
config BOOTLOADER_VDDSDIO_BOOST_1_8V
|
|
bool "1.8V"
|
|
depends on !ESPTOOLPY_FLASHFREQ_80M
|
|
config BOOTLOADER_VDDSDIO_BOOST_1_9V
|
|
bool "1.9V"
|
|
endchoice
|
|
|
|
config BOOTLOADER_FACTORY_RESET
|
|
bool "GPIO triggers factory reset"
|
|
default N
|
|
help
|
|
Allows to reset the device to factory settings:
|
|
- clear one or more data partitions;
|
|
- boot from "factory" partition.
|
|
The factory reset will occur if there is a GPIO input pulled low while device starts up.
|
|
See settings below.
|
|
|
|
config BOOTLOADER_NUM_PIN_FACTORY_RESET
|
|
int "Number of the GPIO input for factory reset"
|
|
depends on BOOTLOADER_FACTORY_RESET
|
|
range 0 39
|
|
default 4
|
|
help
|
|
The selected GPIO will be configured as an input with internal pull-up enabled.
|
|
To trigger a factory reset, this GPIO must be pulled low on reset.
|
|
Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
|
|
|
|
config BOOTLOADER_OTA_DATA_ERASE
|
|
bool "Clear OTA data on factory reset (select factory partition)"
|
|
depends on BOOTLOADER_FACTORY_RESET
|
|
help
|
|
The device will boot from "factory" partition (or OTA slot 0 if no factory partition is present) after a
|
|
factory reset.
|
|
|
|
config BOOTLOADER_DATA_FACTORY_RESET
|
|
string "Comma-separated names of partitions to clear on factory reset"
|
|
depends on BOOTLOADER_FACTORY_RESET
|
|
default "nvs"
|
|
help
|
|
Allows customers to select which data partitions will be erased while factory reset.
|
|
|
|
Specify the names of partitions as a comma-delimited with optional spaces for readability. (Like this:
|
|
"nvs, phy_init, ...")
|
|
Make sure that the name specified in the partition table and here are the same.
|
|
Partitions of type "app" cannot be specified here.
|
|
|
|
config BOOTLOADER_APP_TEST
|
|
bool "GPIO triggers boot from test app partition"
|
|
default N
|
|
help
|
|
Allows to run the test app from "TEST" partition.
|
|
A boot from "test" partition will occur if there is a GPIO input pulled low while device starts up.
|
|
See settings below.
|
|
|
|
config BOOTLOADER_NUM_PIN_APP_TEST
|
|
int "Number of the GPIO input to boot TEST partition"
|
|
depends on BOOTLOADER_APP_TEST
|
|
range 0 39
|
|
default 18
|
|
help
|
|
The selected GPIO will be configured as an input with internal pull-up enabled.
|
|
To trigger a test app, this GPIO must be pulled low on reset.
|
|
After the GPIO input is deactivated and the device reboots, the old application will boot.
|
|
(factory or OTA[x]).
|
|
Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
|
|
|
|
config BOOTLOADER_HOLD_TIME_GPIO
|
|
int "Hold time of GPIO for reset/test mode (seconds)"
|
|
depends on BOOTLOADER_FACTORY_RESET || BOOTLOADER_APP_TEST
|
|
default 5
|
|
help
|
|
The GPIO must be held low continuously for this period of time after reset
|
|
before a factory reset or test partition boot (as applicable) is performed.
|
|
|
|
config BOOTLOADER_WDT_ENABLE
|
|
bool "Use RTC watchdog in start code"
|
|
default y
|
|
help
|
|
Tracks the execution time of startup code.
|
|
If the execution time is exceeded, the RTC_WDT will restart system.
|
|
It is also useful to prevent a lock up in start code caused by an unstable power source.
|
|
NOTE: Tracks the execution time starts from the bootloader code - re-set timeout, while selecting the
|
|
source for slow_clk - and ends calling app_main.
|
|
Re-set timeout is needed due to WDT uses a SLOW_CLK clock source. After changing a frequency slow_clk a
|
|
time of WDT needs to re-set for new frequency.
|
|
slow_clk depends on ESP32_RTC_CLK_SRC (INTERNAL_RC or EXTERNAL_CRYSTAL).
|
|
|
|
config BOOTLOADER_WDT_DISABLE_IN_USER_CODE
|
|
bool "Allows RTC watchdog disable in user code"
|
|
depends on BOOTLOADER_WDT_ENABLE
|
|
default n
|
|
help
|
|
If it is set, the client must itself reset or disable rtc_wdt in their code (app_main()).
|
|
Otherwise rtc_wdt will be disabled before calling app_main function.
|
|
Use function rtc_wdt_feed() for resetting counter of rtc_wdt.
|
|
Use function rtc_wdt_disable() for disabling rtc_wdt.
|
|
|
|
config BOOTLOADER_WDT_TIME_MS
|
|
int "Timeout for RTC watchdog (ms)"
|
|
depends on BOOTLOADER_WDT_ENABLE
|
|
default 9000
|
|
range 0 120000
|
|
help
|
|
Verify that this parameter is correct and more then the execution time.
|
|
Pay attention to options such as reset to factory, trigger test partition and encryption on boot
|
|
- these options can increase the execution time.
|
|
Note: RTC_WDT will reset while encryption operations will be performed.
|
|
|
|
config BOOTLOADER_APP_ROLLBACK_ENABLE
|
|
bool "Enable app rollback support"
|
|
default n
|
|
help
|
|
After updating the app, the bootloader runs a new app with the "ESP_OTA_IMG_PENDING_VERIFY" state set.
|
|
This state prevents the re-run of this app. After the first boot of the new app in the user code, the
|
|
function should be called to confirm the operability of the app or vice versa about its non-operability.
|
|
If the app is working, then it is marked as valid. Otherwise, it is marked as not valid and rolls back to
|
|
the previous working app. A reboot is performed, and the app is booted before the software update.
|
|
Note: If during the first boot a new app the power goes out or the WDT works, then roll back will happen.
|
|
Rollback is possible only between the apps with the same security versions.
|
|
|
|
config BOOTLOADER_APP_ANTI_ROLLBACK
|
|
bool "Enable app anti-rollback support"
|
|
depends on BOOTLOADER_APP_ROLLBACK_ENABLE
|
|
default n
|
|
help
|
|
This option prevents rollback to previous firmware/application image with lower security version.
|
|
|
|
config BOOTLOADER_APP_SECURE_VERSION
|
|
int "eFuse secure version of app"
|
|
depends on BOOTLOADER_APP_ANTI_ROLLBACK
|
|
default 0
|
|
help
|
|
The secure version is the sequence number stored in the header of each firmware.
|
|
The security version is set in the bootloader, version is recorded in the eFuse field
|
|
as the number of set ones. The allocated number of bits in the efuse field
|
|
for storing the security version is limited (see BOOTLOADER_APP_SEC_VER_SIZE_EFUSE_FIELD option).
|
|
|
|
Bootloader: When bootloader selects an app to boot, an app is selected that has
|
|
a security version greater or equal that recorded in eFuse field.
|
|
The app is booted with a higher (or equal) secure version.
|
|
|
|
The security version is worth increasing if in previous versions there is
|
|
a significant vulnerability and their use is not acceptable.
|
|
|
|
Your partition table should has a scheme with ota_0 + ota_1 (without factory).
|
|
|
|
config BOOTLOADER_APP_SEC_VER_SIZE_EFUSE_FIELD
|
|
int "Size of the efuse secure version field"
|
|
depends on BOOTLOADER_APP_ANTI_ROLLBACK
|
|
range 1 32 if IDF_TARGET_ESP32
|
|
default 32 if IDF_TARGET_ESP32
|
|
range 1 16 if IDF_TARGET_ESP32S2
|
|
default 16 if IDF_TARGET_ESP32S2
|
|
help
|
|
The size of the efuse secure version field.
|
|
Its length is limited to 32 bits for ESP32 and 16 bits for ESP32-S2.
|
|
This determines how many times the security version can be increased.
|
|
|
|
config BOOTLOADER_EFUSE_SECURE_VERSION_EMULATE
|
|
bool "Emulate operations with efuse secure version(only test)"
|
|
default n
|
|
depends on BOOTLOADER_APP_ANTI_ROLLBACK
|
|
help
|
|
This option allow emulate read/write operations with efuse secure version.
|
|
It allow to test anti-rollback implemention without permanent write eFuse bits.
|
|
In partition table should be exist this partition `emul_efuse, data, 5, , 0x2000`.
|
|
|
|
config BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP
|
|
bool "Skip image validation when exiting deep sleep"
|
|
depends on (SECURE_BOOT && SECURE_BOOT_INSECURE) || !SECURE_BOOT
|
|
default n
|
|
help
|
|
This option disables the normal validation of an image coming out of
|
|
deep sleep (checksums, SHA256, and signature). This is a trade-off
|
|
between wakeup performance from deep sleep, and image integrity checks.
|
|
|
|
Only enable this if you know what you are doing. It should not be used
|
|
in conjunction with using deep_sleep() entry and changing the active OTA
|
|
partition as this would skip the validation upon first load of the new
|
|
OTA partition.
|
|
|
|
config BOOTLOADER_RESERVE_RTC_SIZE
|
|
hex
|
|
default 0x10 if BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP || BOOTLOADER_CUSTOM_RESERVE_RTC
|
|
default 0
|
|
help
|
|
Reserve RTC FAST memory for Skip image validation. This option in bytes.
|
|
This option reserves an area in the RTC FAST memory (access only PRO_CPU).
|
|
Used to save the addresses of the selected application.
|
|
When a wakeup occurs (from Deep sleep), the bootloader retrieves it and
|
|
loads the application without validation.
|
|
|
|
config BOOTLOADER_CUSTOM_RESERVE_RTC
|
|
bool "Reserve RTC FAST memory for custom purposes"
|
|
default n
|
|
help
|
|
This option allows the customer to place data in the RTC FAST memory,
|
|
this area remains valid when rebooted, except for power loss.
|
|
This memory is located at a fixed address and is available
|
|
for both the bootloader and the application.
|
|
(The application and bootoloader must be compiled with the same option).
|
|
The RTC FAST memory has access only through PRO_CPU.
|
|
|
|
config BOOTLOADER_CUSTOM_RESERVE_RTC_SIZE
|
|
hex "Size in bytes for custom purposes"
|
|
range 0 0x10
|
|
default 0
|
|
depends on BOOTLOADER_CUSTOM_RESERVE_RTC
|
|
help
|
|
This option reserves in RTC FAST memory the area for custom purposes.
|
|
If you want to create your own bootloader and save more information
|
|
in this area of memory, you can increase it. It must be a multiple of 4 bytes.
|
|
This area (rtc_retain_mem_t) is reserved and has access from the bootloader and an application.
|
|
|
|
endmenu # Bootloader
|
|
|
|
|
|
menu "Security features"
|
|
|
|
# These three are the actual options to check in code,
|
|
# selected by the displayed options
|
|
config SECURE_SIGNED_ON_BOOT
|
|
bool
|
|
default y
|
|
depends on SECURE_BOOT || SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
|
|
|
|
config SECURE_SIGNED_ON_UPDATE
|
|
bool
|
|
default y
|
|
depends on SECURE_BOOT || SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
|
|
|
|
config SECURE_SIGNED_APPS
|
|
bool
|
|
default y
|
|
select MBEDTLS_ECP_DP_SECP256R1_ENABLED
|
|
select MBEDTLS_ECP_C
|
|
select MBEDTLS_ECDH_C
|
|
select MBEDTLS_ECDSA_C
|
|
depends on SECURE_SIGNED_ON_BOOT || SECURE_SIGNED_ON_UPDATE
|
|
|
|
|
|
config SECURE_SIGNED_APPS_NO_SECURE_BOOT
|
|
bool "Require signed app images"
|
|
depends on !SECURE_BOOT
|
|
help
|
|
Require apps to be signed to verify their integrity.
|
|
|
|
This option uses the same app signature scheme as hardware secure boot, but unlike hardware secure boot it
|
|
does not prevent the bootloader from being physically updated. This means that the device can be secured
|
|
against remote network access, but not physical access. Compared to using hardware Secure Boot this option
|
|
is much simpler to implement.
|
|
|
|
choice SECURE_SIGNED_APPS_SCHEME
|
|
bool "App Signing Scheme"
|
|
depends on SECURE_BOOT || SECURE_SIGNED_APPS_NO_SECURE_BOOT
|
|
default SECURE_SIGNED_APPS_ECDSA_SCHEME if SECURE_BOOT_V1_ENABLED
|
|
default SECURE_SIGNED_APPS_RSA_SCHEME if SECURE_BOOT_V2_ENABLED
|
|
help
|
|
Select the Secure App signing scheme. Depends on the Chip Revision.
|
|
There are two options:
|
|
1. ECDSA based secure boot scheme. (Only choice for Secure Boot V1)
|
|
Supported in ESP32 and ESP32-ECO3.
|
|
2. The RSA based secure boot scheme. (Only choice for Secure Boot V2)
|
|
Supported in ESP32-ECO3. (ESP32 Chip Revision 3 onwards)
|
|
|
|
config SECURE_SIGNED_APPS_ECDSA_SCHEME
|
|
bool "ECDSA"
|
|
depends on IDF_TARGET_ESP32 && (SECURE_SIGNED_APPS_NO_SECURE_BOOT || SECURE_BOOT_V1_ENABLED)
|
|
help
|
|
Embeds the ECDSA public key in the bootloader and signs the application with an ECDSA key.
|
|
|
|
Refer to the documentation before enabling.
|
|
|
|
config SECURE_SIGNED_APPS_RSA_SCHEME
|
|
bool "RSA"
|
|
depends on ESP32_REV_MIN_3 && SECURE_BOOT_V2_ENABLED
|
|
help
|
|
Appends the RSA-3072 based Signature block to the application.
|
|
Refer to <Secure Boot Version 2 documentation link> before enabling.
|
|
endchoice
|
|
|
|
config SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
|
|
bool "Bootloader verifies app signatures"
|
|
default n
|
|
depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
|
|
help
|
|
If this option is set, the bootloader will be compiled with code to verify that an app is signed before
|
|
booting it.
|
|
|
|
If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
|
|
If hardware secure boot is not enabled, this option doesn't add significant security by itself so most
|
|
users will want to leave it disabled.
|
|
|
|
config SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
|
|
bool "Verify app signature on update"
|
|
default y
|
|
depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
|
|
help
|
|
If this option is set, any OTA updated apps will have the signature verified before being considered valid.
|
|
|
|
When enabled, the signature is automatically checked whenever the esp_ota_ops.h APIs are used for OTA
|
|
updates, or esp_image_format.h APIs are used to verify apps.
|
|
|
|
If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
|
|
If hardware secure boot is not enabled, this option still adds significant security against network-based
|
|
attackers by preventing spoofing of OTA updates.
|
|
|
|
config SECURE_BOOT
|
|
bool "Enable hardware Secure Boot in bootloader (READ DOCS FIRST)"
|
|
default n
|
|
help
|
|
Build a bootloader which enables Secure Boot on first boot.
|
|
|
|
Once enabled, Secure Boot will not boot a modified bootloader. The bootloader will only load a partition
|
|
table or boot an app if the data has a verified digital signature. There are implications for reflashing
|
|
updated apps once secure boot is enabled.
|
|
|
|
When enabling secure boot, JTAG and ROM BASIC Interpreter are permanently disabled by default.
|
|
|
|
choice SECURE_BOOT_VERSION
|
|
bool "Select secure boot version"
|
|
default SECURE_BOOT_V2_ENABLED if ESP32_REV_MIN_3
|
|
depends on SECURE_BOOT
|
|
help
|
|
Select the Secure Boot Version. Depends on the Chip Revision.
|
|
Secure Boot V2 is the new RSA based secure boot scheme.
|
|
Supported in ESP32-ECO3. (ESP32 Chip Revision 3 onwards)
|
|
Secure Boot V1 is the AES based secure boot scheme.
|
|
Supported in ESP32 and ESP32-ECO3.
|
|
|
|
config SECURE_BOOT_V1_ENABLED
|
|
bool "Enable Secure Boot version 1"
|
|
depends on IDF_TARGET_ESP32
|
|
help
|
|
Build a bootloader which enables secure boot version 1 on first boot.
|
|
Refer to the Secure Boot section of the ESP-IDF Programmer's Guide for this version before enabling.
|
|
|
|
config SECURE_BOOT_V2_ENABLED
|
|
bool "Enable Secure Boot version 2"
|
|
depends on ESP32_REV_MIN_3
|
|
help
|
|
Build a bootloader which enables Secure Boot version 2 on first boot.
|
|
Refer to Secure Boot V2 section of the ESP-IDF Programmer's Guide for this version before enabling.
|
|
|
|
endchoice
|
|
|
|
choice SECURE_BOOTLOADER_MODE
|
|
bool "Secure bootloader mode"
|
|
depends on SECURE_BOOT_V1_ENABLED
|
|
default SECURE_BOOTLOADER_ONE_TIME_FLASH
|
|
|
|
config SECURE_BOOTLOADER_ONE_TIME_FLASH
|
|
bool "One-time flash"
|
|
help
|
|
On first boot, the bootloader will generate a key which is not readable externally or by software. A
|
|
digest is generated from the bootloader image itself. This digest will be verified on each subsequent
|
|
boot.
|
|
|
|
Enabling this option means that the bootloader cannot be changed after the first time it is booted.
|
|
|
|
config SECURE_BOOTLOADER_REFLASHABLE
|
|
bool "Reflashable"
|
|
help
|
|
Generate a reusable secure bootloader key, derived (via SHA-256) from the secure boot signing key.
|
|
|
|
This allows the secure bootloader to be re-flashed by anyone with access to the secure boot signing
|
|
key.
|
|
|
|
This option is less secure than one-time flash, because a leak of the digest key from one device
|
|
allows reflashing of any device that uses it.
|
|
|
|
endchoice
|
|
|
|
config SECURE_BOOT_BUILD_SIGNED_BINARIES
|
|
bool "Sign binaries during build"
|
|
depends on SECURE_SIGNED_APPS
|
|
default y
|
|
help
|
|
Once secure boot or signed app requirement is enabled, app images are required to be signed.
|
|
|
|
If enabled (default), these binary files are signed as part of the build process. The file named in
|
|
"Secure boot private signing key" will be used to sign the image.
|
|
|
|
If disabled, unsigned app/partition data will be built. They must be signed manually using espsecure.py.
|
|
Version 1 to enable ECDSA Based Secure Boot and Version 2 to enable RSA based Secure Boot.
|
|
(for example, on a remote signing server.)
|
|
|
|
config SECURE_BOOT_SIGNING_KEY
|
|
string "Secure boot private signing key"
|
|
depends on SECURE_BOOT_BUILD_SIGNED_BINARIES
|
|
default "secure_boot_signing_key.pem"
|
|
help
|
|
Path to the key file used to sign app images.
|
|
|
|
Key file is an ECDSA private key (NIST256p curve) in PEM format for Secure Boot V1.
|
|
Key file is an RSA private key in PEM format for Secure Boot V2.
|
|
|
|
Path is evaluated relative to the project directory.
|
|
|
|
You can generate a new signing key by running the following command:
|
|
espsecure.py generate_signing_key secure_boot_signing_key.pem
|
|
|
|
See the Secure Boot section of the ESP-IDF Programmer's Guide for this version for details.
|
|
|
|
config SECURE_BOOT_VERIFICATION_KEY
|
|
string "Secure boot public signature verification key"
|
|
depends on SECURE_SIGNED_APPS && !SECURE_BOOT_BUILD_SIGNED_BINARIES && !SECURE_SIGNED_APPS_RSA_SCHEME
|
|
default "signature_verification_key.bin"
|
|
help
|
|
Path to a public key file used to verify signed images.
|
|
Secure Boot V1: This ECDSA public key is compiled into the bootloader and/or
|
|
app, to verify app images.
|
|
Secure Boot V2: This RSA public key is compiled into the signature block at
|
|
the end of the bootloader/app.
|
|
|
|
Key file is in raw binary format, and can be extracted from a
|
|
PEM formatted private key using the espsecure.py
|
|
extract_public_key command.
|
|
|
|
Refer to the Secure Boot section of the ESP-IDF Programmer's Guide for this version before enabling.
|
|
|
|
choice SECURE_BOOTLOADER_KEY_ENCODING
|
|
bool "Hardware Key Encoding"
|
|
depends on SECURE_BOOTLOADER_REFLASHABLE
|
|
default SECURE_BOOTLOADER_KEY_ENCODING_256BIT
|
|
help
|
|
|
|
In reflashable secure bootloader mode, a hardware key is derived from the signing key (with SHA-256) and
|
|
can be written to eFuse with espefuse.py.
|
|
|
|
Normally this is a 256-bit key, but if 3/4 Coding Scheme is used on the device then the eFuse key is
|
|
truncated to 192 bits.
|
|
|
|
This configuration item doesn't change any firmware code, it only changes the size of key binary which is
|
|
generated at build time.
|
|
|
|
config SECURE_BOOTLOADER_KEY_ENCODING_256BIT
|
|
bool "No encoding (256 bit key)"
|
|
|
|
config SECURE_BOOTLOADER_KEY_ENCODING_192BIT
|
|
bool "3/4 encoding (192 bit key)"
|
|
|
|
endchoice
|
|
|
|
config SECURE_BOOT_INSECURE
|
|
bool "Allow potentially insecure options"
|
|
depends on SECURE_BOOT
|
|
default N
|
|
help
|
|
You can disable some of the default protections offered by secure boot, in order to enable testing or a
|
|
custom combination of security features.
|
|
|
|
Only enable these options if you are very sure.
|
|
|
|
Refer to the Secure Boot section of the ESP-IDF Programmer's Guide for this version before enabling.
|
|
|
|
config SECURE_FLASH_ENC_ENABLED
|
|
bool "Enable flash encryption on boot (READ DOCS FIRST)"
|
|
default N
|
|
help
|
|
If this option is set, flash contents will be encrypted by the bootloader on first boot.
|
|
|
|
Note: After first boot, the system will be permanently encrypted. Re-flashing an encrypted
|
|
system is complicated and not always possible.
|
|
|
|
Read https://docs.espressif.com/projects/esp-idf/en/latest/security/flash-encryption.html
|
|
before enabling.
|
|
|
|
choice SECURE_FLASH_ENCRYPTION_KEYSIZE
|
|
bool "Size of generated AES-XTS key"
|
|
default SECURE_FLASH_ENCRYPTION_AES128
|
|
depends on IDF_TARGET_ESP32S2 && SECURE_FLASH_ENC_ENABLED
|
|
help
|
|
Size of generated AES-XTS key.
|
|
|
|
AES-128 uses a 256-bit key (32 bytes) which occupies one Efuse key block.
|
|
AES-256 uses a 512-bit key (64 bytes) which occupies two Efuse key blocks.
|
|
|
|
This setting is ignored if either type of key is already burned to Efuse before the first boot.
|
|
In this case, the pre-burned key is used and no new key is generated.
|
|
|
|
config SECURE_FLASH_ENCRYPTION_AES128
|
|
bool "AES-128 (256-bit key)"
|
|
|
|
config SECURE_FLASH_ENCRYPTION_AES256
|
|
bool "AES-256 (512-bit key)"
|
|
endchoice
|
|
|
|
choice SECURE_FLASH_ENCRYPTION_MODE
|
|
bool "Enable usage mode"
|
|
depends on SECURE_FLASH_ENC_ENABLED
|
|
default SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
help
|
|
By default Development mode is enabled which allows UART bootloader to perform flash encryption operations
|
|
|
|
Select Release mode only for production or manufacturing. Once enabled you can not reflash using UART
|
|
bootloader
|
|
|
|
Refer to the Secure Boot section of the ESP-IDF Programmer's Guide for this version and
|
|
https://docs.espressif.com/projects/esp-idf/en/latest/security/flash-encryption.html for details.
|
|
|
|
config SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
bool "Development(NOT SECURE)"
|
|
select SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
|
|
|
|
config SECURE_FLASH_ENCRYPTION_MODE_RELEASE
|
|
bool "Release"
|
|
|
|
endchoice
|
|
|
|
menu "Potentially insecure options"
|
|
visible if SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT || SECURE_BOOT_INSECURE
|
|
|
|
# NOTE: Options in this menu NEED to have SECURE_BOOT_INSECURE
|
|
# and/or SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT in "depends on", as the menu
|
|
# itself doesn't enable/disable its children (if it's not set,
|
|
# it's possible for the insecure menu to be disabled but the insecure option
|
|
# to remain on which is very bad.)
|
|
|
|
config SECURE_BOOT_ALLOW_ROM_BASIC
|
|
bool "Leave ROM BASIC Interpreter available on reset"
|
|
depends on SECURE_BOOT_INSECURE || SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
By default, the BASIC ROM Console starts on reset if no valid bootloader is
|
|
read from the flash.
|
|
|
|
When either flash encryption or secure boot are enabled, the default is to
|
|
disable this BASIC fallback mode permanently via eFuse.
|
|
|
|
If this option is set, this eFuse is not burned and the BASIC ROM Console may
|
|
remain accessible. Only set this option in testing environments.
|
|
|
|
config SECURE_BOOT_ALLOW_JTAG
|
|
bool "Allow JTAG Debugging"
|
|
depends on SECURE_BOOT_INSECURE || SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable JTAG (across entire chip) on first boot
|
|
when either secure boot or flash encryption is enabled.
|
|
|
|
Setting this option leaves JTAG on for debugging, which negates all protections of flash encryption
|
|
and some of the protections of secure boot.
|
|
|
|
Only set this option in testing environments.
|
|
|
|
config SECURE_BOOT_ALLOW_SHORT_APP_PARTITION
|
|
bool "Allow app partition length not 64KB aligned"
|
|
depends on SECURE_BOOT_INSECURE
|
|
help
|
|
If not set (default), app partition size must be a multiple of 64KB. App images are padded to 64KB
|
|
length, and the bootloader checks any trailing bytes after the signature (before the next 64KB
|
|
boundary) have not been written. This is because flash cache maps entire 64KB pages into the address
|
|
space. This prevents an attacker from appending unverified data after the app image in the flash,
|
|
causing it to be mapped into the address space.
|
|
|
|
Setting this option allows the app partition length to be unaligned, and disables padding of the app
|
|
image to this length. It is generally not recommended to set this option, unless you have a legacy
|
|
partitioning scheme which doesn't support 64KB aligned partition lengths.
|
|
|
|
config SECURE_BOOT_V2_ALLOW_EFUSE_RD_DIS
|
|
bool "Allow additional read protecting of efuses"
|
|
depends on SECURE_BOOT_INSECURE && SECURE_BOOT_V2_ENABLED
|
|
help
|
|
If not set (default, recommended), on first boot the bootloader will burn the WR_DIS_RD_DIS
|
|
efuse when Secure Boot is enabled. This prevents any more efuses from being read protected.
|
|
|
|
If this option is set, it will remain possible to write the EFUSE_RD_DIS efuse field after Secure
|
|
Boot is enabled. This may allow an attacker to read-protect the BLK2 efuse holding the public
|
|
key digest, causing an immediate denial of service and possibly allowing an additional fault
|
|
injection attack to bypass the signature protection.
|
|
|
|
config SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
|
|
bool "Leave UART bootloader encryption enabled"
|
|
depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable UART bootloader encryption access on
|
|
first boot. If set, the UART bootloader will still be able to access hardware encryption.
|
|
|
|
It is recommended to only set this option in testing environments.
|
|
|
|
config SECURE_FLASH_UART_BOOTLOADER_ALLOW_DEC
|
|
bool "Leave UART bootloader decryption enabled"
|
|
depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable UART bootloader decryption access on
|
|
first boot. If set, the UART bootloader will still be able to access hardware decryption.
|
|
|
|
Only set this option in testing environments. Setting this option allows complete bypass of flash
|
|
encryption.
|
|
|
|
config SECURE_FLASH_UART_BOOTLOADER_ALLOW_CACHE
|
|
bool "Leave UART bootloader flash cache enabled"
|
|
depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable UART bootloader flash cache access on
|
|
first boot. If set, the UART bootloader will still be able to access the flash cache.
|
|
|
|
Only set this option in testing environments.
|
|
|
|
config SECURE_FLASH_REQUIRE_ALREADY_ENABLED
|
|
bool "Require flash encryption to be already enabled"
|
|
depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
If not set (default), and flash encryption is not yet enabled in eFuses, the 2nd stage bootloader
|
|
will enable flash encryption: generate the flash encryption key and program eFuses.
|
|
If this option is set, and flash encryption is not yet enabled, the bootloader will error out and
|
|
reboot.
|
|
If flash encryption is enabled in eFuses, this option does not change the bootloader behavior.
|
|
|
|
Only use this option in testing environments, to avoid accidentally enabling flash encryption on
|
|
the wrong device. The device needs to have flash encryption already enabled using espefuse.py.
|
|
|
|
endmenu # Potentially Insecure
|
|
endmenu # Security features
|
|
|