OVMS3-idf/components/ethernet/emac_dev.c
morris 20b7f0ec87 ethernet: fix infinite loop when init phy or reset mac
1. fix infinite loop problem when init phy device
2. fix infinite loop problem when reset mac
3. fix little bugs in ethernetif_init
4. fix incompatible return value between lwip and esp-idf

Closes https://github.com/espressif/esp-idf/issues/2331
Closes https://github.com/espressif/esp-idf/issues/2141
2018-09-20 10:09:38 +08:00

101 lines
2.7 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdio.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "rom/ets_sys.h"
#include "rom/gpio.h"
#include "soc/dport_reg.h"
#include "soc/io_mux_reg.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/gpio_reg.h"
#include "soc/gpio_sig_map.h"
#include "soc/emac_reg_v2.h"
#include "soc/emac_ex_reg.h"
#include "esp_log.h"
#include "driver/gpio.h"
#include "sdkconfig.h"
#include "emac_common.h"
void emac_enable_flowctrl(void)
{
REG_SET_BIT(EMAC_GMACFC_REG, EMAC_TFCE);
REG_SET_BIT(EMAC_GMACFC_REG, EMAC_RFCE);
REG_CLR_BIT(EMAC_GMACFC_REG, EMAC_DZPQ);
REG_SET_FIELD(EMAC_GMACFC_REG, EMAC_PAUSE_TIME, 0x1648);
REG_SET_FIELD(EMAC_GMACFC_REG, EMAC_PLT, 0x1);
}
void emac_disable_flowctrl(void)
{
REG_CLR_BIT(EMAC_GMACFC_REG, EMAC_TFCE);
REG_CLR_BIT(EMAC_GMACFC_REG, EMAC_RFCE);
REG_CLR_BIT(EMAC_GMACFC_REG, EMAC_DZPQ);
REG_SET_FIELD(EMAC_GMACFC_REG, EMAC_PAUSE_TIME, 0);
REG_SET_FIELD(EMAC_GMACFC_REG, EMAC_PLT, 0);
}
void emac_enable_dma_tx(void)
{
REG_SET_BIT(EMAC_DMAOPERATION_MODE_REG, EMAC_START_STOP_TRANSMISSION_COMMAND);
}
void emac_enable_dma_rx(void)
{
REG_SET_BIT(EMAC_DMAOPERATION_MODE_REG, EMAC_START_STOP_RX);
}
void emac_disable_dma_tx(void)
{
REG_CLR_BIT(EMAC_DMAOPERATION_MODE_REG, EMAC_START_STOP_TRANSMISSION_COMMAND);
}
void emac_disable_dma_rx(void)
{
REG_CLR_BIT(EMAC_DMAOPERATION_MODE_REG, EMAC_START_STOP_RX);
}
void emac_enable_clk(bool enable)
{
if (enable == true) {
DPORT_REG_SET_BIT(EMAC_CLK_EN_REG, EMAC_CLK_EN);
} else {
DPORT_REG_CLR_BIT(EMAC_CLK_EN_REG, EMAC_CLK_EN);
}
}
void emac_dma_init(void)
{
REG_SET_BIT(EMAC_DMAOPERATION_MODE_REG, EMAC_FWD_UNDER_GF);
REG_SET_BIT(EMAC_DMAOPERATION_MODE_REG, EMAC_OPT_SECOND_FRAME);
REG_SET_FIELD(EMAC_DMABUSMODE_REG, EMAC_PROG_BURST_LEN, 4);
}
void emac_mac_enable_txrx(void)
{
REG_SET_BIT(EMAC_GMACCONFIG_REG, EMAC_EMACRX);
REG_SET_BIT(EMAC_GMACCONFIG_REG, EMAC_EMACTX);
}
void emac_mac_init(void)
{
REG_SET_BIT(EMAC_GMACCONFIG_REG, EMAC_EMACDUPLEX);
REG_SET_BIT(EMAC_GMACCONFIG_REG, EMAC_EMACMII);
REG_CLR_BIT(EMAC_GMACCONFIG_REG, EMAC_EMACFESPEED);
}