115 lines
4.3 KiB
C
115 lines
4.3 KiB
C
/* Ethernet Basic Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "tcpip_adapter.h"
|
|
#include "esp_eth.h"
|
|
#include "esp_event.h"
|
|
#include "esp_log.h"
|
|
#include "sdkconfig.h"
|
|
|
|
static const char *TAG = "eth_example";
|
|
|
|
/** Event handler for Ethernet events */
|
|
static void eth_event_handler(void *arg, esp_event_base_t event_base,
|
|
int32_t event_id, void *event_data)
|
|
{
|
|
uint8_t mac_addr[6] = {0};
|
|
/* we can get the ethernet driver handle from event data */
|
|
esp_eth_handle_t eth_handle = *(esp_eth_handle_t *)event_data;
|
|
|
|
switch (event_id) {
|
|
case ETHERNET_EVENT_CONNECTED:
|
|
esp_eth_ioctl(eth_handle, ETH_CMD_G_MAC_ADDR, mac_addr);
|
|
ESP_LOGI(TAG, "Ethernet Link Up");
|
|
ESP_LOGI(TAG, "Ethernet HW Addr %02x:%02x:%02x:%02x:%02x:%02x",
|
|
mac_addr[0], mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
|
|
break;
|
|
case ETHERNET_EVENT_DISCONNECTED:
|
|
ESP_LOGI(TAG, "Ethernet Link Down");
|
|
break;
|
|
case ETHERNET_EVENT_START:
|
|
ESP_LOGI(TAG, "Ethernet Started");
|
|
break;
|
|
case ETHERNET_EVENT_STOP:
|
|
ESP_LOGI(TAG, "Ethernet Stopped");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/** Event handler for IP_EVENT_ETH_GOT_IP */
|
|
static void got_ip_event_handler(void *arg, esp_event_base_t event_base,
|
|
int32_t event_id, void *event_data)
|
|
{
|
|
ip_event_got_ip_t *event = (ip_event_got_ip_t *) event_data;
|
|
const tcpip_adapter_ip_info_t *ip_info = &event->ip_info;
|
|
|
|
ESP_LOGI(TAG, "Ethernet Got IP Address");
|
|
ESP_LOGI(TAG, "~~~~~~~~~~~");
|
|
ESP_LOGI(TAG, "ETHIP:" IPSTR, IP2STR(&ip_info->ip));
|
|
ESP_LOGI(TAG, "ETHMASK:" IPSTR, IP2STR(&ip_info->netmask));
|
|
ESP_LOGI(TAG, "ETHGW:" IPSTR, IP2STR(&ip_info->gw));
|
|
ESP_LOGI(TAG, "~~~~~~~~~~~");
|
|
}
|
|
|
|
void app_main(void)
|
|
{
|
|
tcpip_adapter_init();
|
|
|
|
ESP_ERROR_CHECK(esp_event_loop_create_default());
|
|
ESP_ERROR_CHECK(tcpip_adapter_set_default_eth_handlers());
|
|
ESP_ERROR_CHECK(esp_event_handler_register(ETH_EVENT, ESP_EVENT_ANY_ID, ð_event_handler, NULL));
|
|
ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_ETH_GOT_IP, &got_ip_event_handler, NULL));
|
|
|
|
eth_mac_config_t mac_config = ETH_MAC_DEFAULT_CONFIG();
|
|
eth_phy_config_t phy_config = ETH_PHY_DEFAULT_CONFIG();
|
|
#if CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET
|
|
esp_eth_mac_t *mac = esp_eth_mac_new_esp32(&mac_config);
|
|
#if CONFIG_EXAMPLE_ETH_PHY_IP101
|
|
esp_eth_phy_t *phy = esp_eth_phy_new_ip101(&phy_config);
|
|
#elif CONFIG_EXAMPLE_ETH_PHY_RTL8201
|
|
esp_eth_phy_t *phy = esp_eth_phy_new_rtl8201(&phy_config);
|
|
#elif CONFIG_EXAMPLE_ETH_PHY_LAN8720
|
|
esp_eth_phy_t *phy = esp_eth_phy_new_lan8720(&phy_config);
|
|
#elif CONFIG_EXAMPLE_ETH_PHY_DP83848
|
|
esp_eth_phy_t *phy = esp_eth_phy_new_dp83848(&phy_config);
|
|
#endif
|
|
#elif CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
|
gpio_install_isr_service(0);
|
|
spi_device_handle_t spi_handle = NULL;
|
|
spi_bus_config_t buscfg = {
|
|
.miso_io_num = CONFIG_EXAMPLE_ETH_MISO_GPIO,
|
|
.mosi_io_num = CONFIG_EXAMPLE_ETH_MOSI_GPIO,
|
|
.sclk_io_num = CONFIG_EXAMPLE_ETH_SCLK_GPIO,
|
|
.quadwp_io_num = -1,
|
|
.quadhd_io_num = -1,
|
|
};
|
|
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_ETH_SPI_HOST, &buscfg, 1));
|
|
spi_device_interface_config_t devcfg = {
|
|
.command_bits = 1,
|
|
.address_bits = 7,
|
|
.mode = 0,
|
|
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
|
|
.spics_io_num = CONFIG_EXAMPLE_ETH_CS_GPIO,
|
|
.queue_size = 20
|
|
};
|
|
ESP_ERROR_CHECK(spi_bus_add_device(CONFIG_EXAMPLE_ETH_SPI_HOST, &devcfg, &spi_handle));
|
|
/* dm9051 ethernet driver is based on spi driver, so need to specify the spi handle */
|
|
mac_config.spi_hdl = spi_handle;
|
|
esp_eth_mac_t *mac = esp_eth_mac_new_dm9051(&mac_config);
|
|
esp_eth_phy_t *phy = esp_eth_phy_new_dm9051(&phy_config);
|
|
#endif
|
|
esp_eth_config_t config = ETH_DEFAULT_CONFIG(mac, phy);
|
|
esp_eth_handle_t eth_handle = NULL;
|
|
ESP_ERROR_CHECK(esp_eth_driver_install(&config, ð_handle));
|
|
}
|