609 lines
24 KiB
Text
609 lines
24 KiB
Text
menu "LWIP"
|
|
|
|
config LWIP_LOCAL_HOSTNAME
|
|
string "Local netif hostname"
|
|
default 'espressif'
|
|
help
|
|
The name this device will report to other devices on the network
|
|
|
|
config LWIP_DNS_SUPPORT_MDNS_QUERIES
|
|
bool "Enable mDNS queries in resolving host name"
|
|
default y
|
|
help
|
|
If this feature is enabled, standard API such as gethostbyname
|
|
support .local addresses by sending one shot multicast mDNS
|
|
query
|
|
|
|
config LWIP_L2_TO_L3_COPY
|
|
bool "Enable copy between Layer2 and Layer3 packets"
|
|
default n
|
|
help
|
|
If this feature is enabled, all traffic from layer2(WIFI Driver) will be
|
|
copied to a new buffer before sending it to layer3(LWIP stack), freeing
|
|
the layer2 buffer.
|
|
Please be notified that the total layer2 receiving buffer is fixed and
|
|
ESP32 currently supports 25 layer2 receiving buffer, when layer2 buffer
|
|
runs out of memory, then the incoming packets will be dropped in hardware.
|
|
The layer3 buffer is allocated from the heap, so the total layer3 receiving
|
|
buffer depends on the available heap size, when heap runs out of memory,
|
|
no copy will be sent to layer3 and packet will be dropped in layer2.
|
|
Please make sure you fully understand the impact of this feature before
|
|
enabling it.
|
|
|
|
config LWIP_IRAM_OPTIMIZATION
|
|
bool "Enable LWIP IRAM optimization"
|
|
default n
|
|
help
|
|
If this feature is enabled, some functions relating to RX/TX in LWIP will be
|
|
put into IRAM, it can improve UDP/TCP throughput by >10% for single core mode,
|
|
it doesn't help too much for dual core mode. On the other hand, it needs about
|
|
10KB IRAM for these optimizations.
|
|
|
|
If this feature is disabled, all lwip functions will be put into FLASH.
|
|
|
|
config LWIP_TIMERS_ONDEMAND
|
|
bool "Enable LWIP Timers on demand"
|
|
default y
|
|
help
|
|
If this feature is enabled, IGMP and MLD6 timers will be activated only
|
|
when joining groups or receiving QUERY packets.
|
|
|
|
This feature will reduce the power consumption for applications which do not
|
|
use IGMP and MLD6.
|
|
|
|
config LWIP_MAX_SOCKETS
|
|
int "Max number of open sockets"
|
|
range 1 16
|
|
default 10
|
|
help
|
|
Sockets take up a certain amount of memory, and allowing fewer
|
|
sockets to be open at the same time conserves memory. Specify
|
|
the maximum amount of sockets here. The valid value is from 1
|
|
to 16.
|
|
|
|
config LWIP_USE_ONLY_LWIP_SELECT
|
|
bool "Support LWIP socket select() only"
|
|
default n
|
|
help
|
|
The virtual filesystem layer of select() redirects sockets to
|
|
lwip_select() and non-socket file descriptors to their respective driver
|
|
implementations. If this option is enabled then all calls of select()
|
|
will be redirected to lwip_select(), therefore, select can be used
|
|
for sockets only.
|
|
|
|
config LWIP_SO_REUSE
|
|
bool "Enable SO_REUSEADDR option"
|
|
default y
|
|
help
|
|
Enabling this option allows binding to a port which remains in
|
|
TIME_WAIT.
|
|
|
|
config LWIP_SO_REUSE_RXTOALL
|
|
bool "SO_REUSEADDR copies broadcast/multicast to all matches"
|
|
depends on LWIP_SO_REUSE
|
|
default y
|
|
help
|
|
Enabling this option means that any incoming broadcast or multicast
|
|
packet will be copied to all of the local sockets that it matches
|
|
(may be more than one if SO_REUSEADDR is set on the socket.)
|
|
|
|
This increases memory overhead as the packets need to be copied,
|
|
however they are only copied per matching socket. You can safely
|
|
disable it if you don't plan to receive broadcast or multicast
|
|
traffic on more than one socket at a time.
|
|
|
|
config LWIP_SO_RCVBUF
|
|
bool "Enable SO_RCVBUF option"
|
|
default n
|
|
help
|
|
Enabling this option allows checking for available data on a netconn.
|
|
|
|
config LWIP_NETBUF_RECVINFO
|
|
bool "Enable IP_PKTINFO option"
|
|
default n
|
|
help
|
|
Enabling this option allows checking for the destination address
|
|
of a received IPv4 Packet.
|
|
|
|
config LWIP_IP_FRAG
|
|
bool "Enable fragment outgoing IP packets"
|
|
default n
|
|
help
|
|
Enabling this option allows fragmenting outgoing IP packets if their size
|
|
exceeds MTU.
|
|
|
|
config LWIP_IP_REASSEMBLY
|
|
bool "Enable reassembly incoming fragmented IP packets"
|
|
default n
|
|
help
|
|
Enabling this option allows reassemblying incoming fragmented IP packets.
|
|
|
|
config LWIP_STATS
|
|
bool "Enable LWIP statistics"
|
|
default n
|
|
help
|
|
Enabling this option allows LWIP statistics
|
|
|
|
config LWIP_ETHARP_TRUST_IP_MAC
|
|
bool "Enable LWIP ARP trust"
|
|
default n
|
|
help
|
|
Enabling this option allows ARP table to be updated.
|
|
|
|
If this option is enabled, the incoming IP packets cause the ARP table to be
|
|
updated with the source MAC and IP addresses supplied in the packet.
|
|
You may want to disable this if you do not trust LAN peers to have the
|
|
correct addresses, or as a limited approach to attempt to handle
|
|
spoofing. If disabled, lwIP will need to make a new ARP request if
|
|
the peer is not already in the ARP table, adding a little latency.
|
|
The peer *is* in the ARP table if it requested our address before.
|
|
Also notice that this slows down input processing of every IP packet!
|
|
|
|
There are two known issues in real application if this feature is enabled:
|
|
- The LAN peer may have bug to update the ARP table after the ARP entry is aged out.
|
|
If the ARP entry on the LAN peer is aged out but failed to be updated, all IP packets
|
|
sent from LWIP to the LAN peer will be dropped by LAN peer.
|
|
- The LAN peer may not be trustful, the LAN peer may send IP packets to LWIP with
|
|
two different MACs, but the same IP address. If this happens, the LWIP has problem
|
|
to receive IP packets from LAN peer.
|
|
|
|
So the recommendation is to disable this option.
|
|
Here the LAN peer means the other side to which the ESP station or soft-AP is connected.
|
|
|
|
config LWIP_ESP_GRATUITOUS_ARP
|
|
bool "Send gratuitous ARP periodically"
|
|
default y
|
|
help
|
|
Enable this option allows to send gratuitous ARP periodically.
|
|
|
|
This option solve the compatibility issues.If the ARP table of the AP is old, and the AP
|
|
doesn't send ARP request to update it's ARP table, this will lead to the STA sending IP packet fail.
|
|
Thus we send gratuitous ARP periodically to let AP update it's ARP table.
|
|
|
|
config LWIP_GARP_TMR_INTERVAL
|
|
int "GARP timer interval(seconds)"
|
|
default 60
|
|
depends on LWIP_ESP_GRATUITOUS_ARP
|
|
help
|
|
Set the timer interval for gratuitous ARP. The default value is 60s
|
|
|
|
config LWIP_TCPIP_RECVMBOX_SIZE
|
|
int "TCPIP task receive mail box size"
|
|
default 32
|
|
range 6 64 if !LWIP_WND_SCALE
|
|
range 6 1024 if LWIP_WND_SCALE
|
|
help
|
|
Set TCPIP task receive mail box size. Generally bigger value means higher throughput
|
|
but more memory. The value should be bigger than UDP/TCP mail box size.
|
|
|
|
config LWIP_DHCP_DOES_ARP_CHECK
|
|
bool "DHCP: Perform ARP check on any offered address"
|
|
default y
|
|
help
|
|
Enabling this option performs a check (via ARP request) if the offered IP address
|
|
is not already in use by another host on the network.
|
|
|
|
config LWIP_DHCP_RESTORE_LAST_IP
|
|
bool "DHCP: Restore last IP obtained from DHCP server"
|
|
default n
|
|
help
|
|
When this option is enabled, DHCP client tries to re-obtain last valid IP address obtained from DHCP
|
|
server. Last valid DHCP configuration is stored in nvs and restored after reset/power-up. If IP is still
|
|
available, there is no need for sending discovery message to DHCP server and save some time.
|
|
|
|
menu "DHCP server"
|
|
|
|
config LWIP_DHCPS_LEASE_UNIT
|
|
int "Multiplier for lease time, in seconds"
|
|
range 1 3600
|
|
default 60
|
|
help
|
|
The DHCP server is calculating lease time multiplying the sent
|
|
and received times by this number of seconds per unit.
|
|
The default is 60, that equals one minute.
|
|
|
|
config LWIP_DHCPS_MAX_STATION_NUM
|
|
int "Maximum number of stations"
|
|
range 1 64
|
|
default 8
|
|
help
|
|
The maximum number of DHCP clients that are connected to the server.
|
|
After this number is exceeded, DHCP server removes of the oldest device
|
|
from it's address pool, without notification.
|
|
|
|
endmenu # DHCPS
|
|
|
|
menuconfig LWIP_AUTOIP
|
|
bool "Enable IPV4 Link-Local Addressing (AUTOIP)"
|
|
default n
|
|
help
|
|
Enabling this option allows the device to self-assign an address
|
|
in the 169.256/16 range if none is assigned statically or via DHCP.
|
|
|
|
See RFC 3927.
|
|
|
|
config LWIP_AUTOIP_TRIES
|
|
int "DHCP Probes before self-assigning IPv4 LL address"
|
|
range 1 100
|
|
default 2
|
|
depends on LWIP_AUTOIP
|
|
help
|
|
DHCP client will send this many probes before self-assigning a
|
|
link local address.
|
|
|
|
From LWIP help: "This can be set as low as 1 to get an AutoIP
|
|
address very quickly, but you should be prepared to handle a
|
|
changing IP address when DHCP overrides AutoIP." (In the case of
|
|
ESP-IDF, this means multiple SYSTEM_EVENT_STA_GOT_IP events.)
|
|
|
|
config LWIP_AUTOIP_MAX_CONFLICTS
|
|
int "Max IP conflicts before rate limiting"
|
|
range 1 100
|
|
default 9
|
|
depends on LWIP_AUTOIP
|
|
help
|
|
If the AUTOIP functionality detects this many IP conflicts while
|
|
self-assigning an address, it will go into a rate limited mode.
|
|
|
|
config LWIP_AUTOIP_RATE_LIMIT_INTERVAL
|
|
int "Rate limited interval (seconds)"
|
|
range 5 120
|
|
default 20
|
|
depends on LWIP_AUTOIP
|
|
help
|
|
If rate limiting self-assignment requests, wait this long between
|
|
each request.
|
|
|
|
menuconfig LWIP_NETIF_LOOPBACK
|
|
bool "Support per-interface loopback"
|
|
default y
|
|
help
|
|
Enabling this option means that if a packet is sent with a destination
|
|
address equal to the interface's own IP address, it will "loop back" and
|
|
be received by this interface.
|
|
|
|
config LWIP_LOOPBACK_MAX_PBUFS
|
|
int "Max queued loopback packets per interface"
|
|
range 0 16
|
|
default 8
|
|
depends on LWIP_NETIF_LOOPBACK
|
|
help
|
|
Configure the maximum number of packets which can be queued for
|
|
loopback on a given interface. Reducing this number may cause packets
|
|
to be dropped, but will avoid filling memory with queued packet data.
|
|
|
|
menu "TCP"
|
|
|
|
config LWIP_MAX_ACTIVE_TCP
|
|
int "Maximum active TCP Connections"
|
|
range 1 1024
|
|
default 16
|
|
help
|
|
The maximum number of simultaneously active TCP
|
|
connections. The practical maximum limit is
|
|
determined by available heap memory at runtime.
|
|
|
|
Changing this value by itself does not substantially
|
|
change the memory usage of LWIP, except for preventing
|
|
new TCP connections after the limit is reached.
|
|
|
|
config LWIP_MAX_LISTENING_TCP
|
|
int "Maximum listening TCP Connections"
|
|
range 1 1024
|
|
default 16
|
|
help
|
|
The maximum number of simultaneously listening TCP
|
|
connections. The practical maximum limit is
|
|
determined by available heap memory at runtime.
|
|
|
|
Changing this value by itself does not substantially
|
|
change the memory usage of LWIP, except for preventing
|
|
new listening TCP connections after the limit is reached.
|
|
|
|
|
|
config LWIP_TCP_MAXRTX
|
|
int "Maximum number of retransmissions of data segments"
|
|
default 12
|
|
range 3 12
|
|
help
|
|
Set maximum number of retransmissions of data segments.
|
|
|
|
config LWIP_TCP_SYNMAXRTX
|
|
int "Maximum number of retransmissions of SYN segments"
|
|
default 6
|
|
range 3 12
|
|
help
|
|
Set maximum number of retransmissions of SYN segments.
|
|
|
|
config LWIP_TCP_MSS
|
|
int "Maximum Segment Size (MSS)"
|
|
default 1440
|
|
range 536 1460
|
|
help
|
|
Set maximum segment size for TCP transmission.
|
|
|
|
Can be set lower to save RAM, the default value 1460(ipv4)/1440(ipv6) will give best throughput.
|
|
IPv4 TCP_MSS Range: 576 <= TCP_MSS <= 1460
|
|
IPv6 TCP_MSS Range: 1220<= TCP_mSS <= 1440
|
|
|
|
config LWIP_TCP_MSL
|
|
int "Maximum segment lifetime (MSL)"
|
|
default 60000
|
|
help
|
|
Set maximum segment lifetime in in milliseconds.
|
|
|
|
config LWIP_TCP_SND_BUF_DEFAULT
|
|
int "Default send buffer size"
|
|
default 5744 # 4 * default MSS
|
|
range 2440 65535
|
|
help
|
|
Set default send buffer size for new TCP sockets.
|
|
|
|
Per-socket send buffer size can be changed at runtime
|
|
with lwip_setsockopt(s, TCP_SNDBUF, ...).
|
|
|
|
This value must be at least 2x the MSS size, and the default
|
|
is 4x the default MSS size.
|
|
|
|
Setting a smaller default SNDBUF size can save some RAM, but
|
|
will decrease performance.
|
|
|
|
config LWIP_TCP_WND_DEFAULT
|
|
int "Default receive window size"
|
|
default 5744 # 4 * default MSS
|
|
range 2440 65535
|
|
help
|
|
Set default TCP receive window size for new TCP sockets.
|
|
|
|
Per-socket receive window size can be changed at runtime
|
|
with lwip_setsockopt(s, TCP_WINDOW, ...).
|
|
|
|
Setting a smaller default receive window size can save some RAM,
|
|
but will significantly decrease performance.
|
|
|
|
config LWIP_TCP_RECVMBOX_SIZE
|
|
int "Default TCP receive mail box size"
|
|
default 6
|
|
range 6 64 if !LWIP_WND_SCALE
|
|
range 6 1024 if LWIP_WND_SCALE
|
|
help
|
|
Set TCP receive mail box size. Generally bigger value means higher throughput
|
|
but more memory. The recommended value is: LWIP_TCP_WND_DEFAULT/TCP_MSS + 2, e.g. if
|
|
LWIP_TCP_WND_DEFAULT=14360, TCP_MSS=1436, then the recommended receive mail box size is
|
|
(14360/1436 + 2) = 12.
|
|
|
|
TCP receive mail box is a per socket mail box, when the application receives packets
|
|
from TCP socket, LWIP core firstly posts the packets to TCP receive mail box and the
|
|
application then fetches the packets from mail box. It means LWIP can caches maximum
|
|
LWIP_TCP_RECCVMBOX_SIZE packets for each TCP socket, so the maximum possible cached TCP packets
|
|
for all TCP sockets is LWIP_TCP_RECCVMBOX_SIZE multiples the maximum TCP socket number. In other
|
|
words, the bigger LWIP_TCP_RECVMBOX_SIZE means more memory.
|
|
On the other hand, if the receiv mail box is too small, the mail box may be full. If the
|
|
mail box is full, the LWIP drops the packets. So generally we need to make sure the TCP
|
|
receive mail box is big enough to avoid packet drop between LWIP core and application.
|
|
|
|
config LWIP_TCP_QUEUE_OOSEQ
|
|
bool "Queue incoming out-of-order segments"
|
|
default y
|
|
help
|
|
Queue incoming out-of-order segments for later use.
|
|
|
|
Disable this option to save some RAM during TCP sessions, at the expense
|
|
of increased retransmissions if segments arrive out of order.
|
|
|
|
config LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES
|
|
bool "Keep TCP connections when IP changed"
|
|
default n
|
|
help
|
|
This option is enabled when the following scenario happen:
|
|
network dropped and reconnected, IP changes is like: 192.168.0.2->0.0.0.0->192.168.0.2
|
|
|
|
Disable this option to keep consistent with the original LWIP code behavior.
|
|
|
|
|
|
choice LWIP_TCP_OVERSIZE
|
|
prompt "Pre-allocate transmit PBUF size"
|
|
default LWIP_TCP_OVERSIZE_MSS
|
|
help
|
|
Allows enabling "oversize" allocation of TCP transmission pbufs ahead of time,
|
|
which can reduce the length of pbuf chains used for transmission.
|
|
|
|
This will not make a difference to sockets where Nagle's algorithm
|
|
is disabled.
|
|
|
|
Default value of MSS is fine for most applications, 25% MSS may save
|
|
some RAM when only transmitting small amounts of data. Disabled will
|
|
have worst performance and fragmentation characteristics, but uses
|
|
least RAM overall.
|
|
|
|
config LWIP_TCP_OVERSIZE_MSS
|
|
bool "MSS"
|
|
config LWIP_TCP_OVERSIZE_QUARTER_MSS
|
|
bool "25% MSS"
|
|
config LWIP_TCP_OVERSIZE_DISABLE
|
|
bool "Disabled"
|
|
|
|
endchoice
|
|
|
|
config LWIP_WND_SCALE
|
|
bool "Support TCP window scale"
|
|
depends on SPIRAM_TRY_ALLOCATE_WIFI_LWIP
|
|
default n
|
|
help
|
|
Enable this feature to support TCP window scaling.
|
|
|
|
config LWIP_TCP_RCV_SCALE
|
|
int "Set TCP receiving window scaling factor"
|
|
depends on LWIP_WND_SCALE
|
|
range 0 14
|
|
default 0
|
|
help
|
|
Enable this feature to support TCP window scaling.
|
|
|
|
endmenu # TCP
|
|
|
|
menu "UDP"
|
|
|
|
config LWIP_MAX_UDP_PCBS
|
|
int "Maximum active UDP control blocks"
|
|
range 1 1024
|
|
default 16
|
|
help
|
|
The maximum number of active UDP "connections" (ie
|
|
UDP sockets sending/receiving data).
|
|
The practical maximum limit is determined by available
|
|
heap memory at runtime.
|
|
|
|
config LWIP_UDP_RECVMBOX_SIZE
|
|
int "Default UDP receive mail box size"
|
|
default 6
|
|
range 6 64
|
|
help
|
|
Set UDP receive mail box size. The recommended value is 6.
|
|
|
|
UDP receive mail box is a per socket mail box, when the application receives packets
|
|
from UDP socket, LWIP core firstly posts the packets to UDP receive mail box and the
|
|
application then fetches the packets from mail box. It means LWIP can caches maximum
|
|
UDP_RECCVMBOX_SIZE packets for each UDP socket, so the maximum possible cached UDP packets
|
|
for all UDP sockets is UDP_RECCVMBOX_SIZE multiples the maximum UDP socket number. In other
|
|
words, the bigger UDP_RECVMBOX_SIZE means more memory.
|
|
On the other hand, if the receiv mail box is too small, the mail box may be full. If the
|
|
mail box is full, the LWIP drops the packets. So generally we need to make sure the UDP
|
|
receive mail box is big enough to avoid packet drop between LWIP core and application.
|
|
|
|
endmenu # UDP
|
|
|
|
config LWIP_TCPIP_TASK_STACK_SIZE
|
|
int "TCP/IP Task Stack Size"
|
|
default 3072
|
|
# for high log levels, tcpip_adapter API calls can end up
|
|
# a few calls deep and logging there can trigger a stack overflow
|
|
range 2048 65536 if LOG_DEFAULT_LEVEL < 4
|
|
range 2560 65536 if LOG_DEFAULT_LEVEL >= 4
|
|
help
|
|
Configure TCP/IP task stack size, used by LWIP to process multi-threaded TCP/IP operations.
|
|
Setting this stack too small will result in stack overflow crashes.
|
|
|
|
choice LWIP_TCPIP_TASK_AFFINITY
|
|
prompt "TCP/IP task affinity"
|
|
default LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY
|
|
help
|
|
Allows setting LwIP tasks affinity, i.e. whether the task is pinned to
|
|
CPU0, pinned to CPU1, or allowed to run on any CPU.
|
|
Currently this applies to "TCP/IP" task and "Ping" task.
|
|
|
|
config LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY
|
|
bool "No affinity"
|
|
config LWIP_TCPIP_TASK_AFFINITY_CPU0
|
|
bool "CPU0"
|
|
config LWIP_TCPIP_TASK_AFFINITY_CPU1
|
|
bool "CPU1"
|
|
depends on !FREERTOS_UNICORE
|
|
|
|
endchoice
|
|
|
|
config LWIP_TCPIP_TASK_AFFINITY
|
|
hex
|
|
default FREERTOS_NO_AFFINITY if LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY
|
|
default 0x0 if LWIP_TCPIP_TASK_AFFINITY_CPU0
|
|
default 0x1 if LWIP_TCPIP_TASK_AFFINITY_CPU1
|
|
|
|
|
|
menuconfig LWIP_PPP_SUPPORT
|
|
bool "Enable PPP support (new/experimental)"
|
|
default n
|
|
help
|
|
Enable PPP stack. Now only PPP over serial is possible.
|
|
|
|
PPP over serial support is experimental and unsupported.
|
|
|
|
config LWIP_PPP_NOTIFY_PHASE_SUPPORT
|
|
bool "Enable Notify Phase Callback"
|
|
depends on LWIP_PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable to set a callback which is called on change of the internal PPP state machine.
|
|
|
|
config LWIP_PPP_PAP_SUPPORT
|
|
bool "Enable PAP support"
|
|
depends on LWIP_PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable Password Authentication Protocol (PAP) support
|
|
|
|
config LWIP_PPP_CHAP_SUPPORT
|
|
bool "Enable CHAP support"
|
|
depends on LWIP_PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable Challenge Handshake Authentication Protocol (CHAP) support
|
|
|
|
config LWIP_PPP_MSCHAP_SUPPORT
|
|
bool "Enable MSCHAP support"
|
|
depends on LWIP_PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable Microsoft version of the Challenge-Handshake Authentication Protocol (MSCHAP) support
|
|
|
|
config LWIP_PPP_MPPE_SUPPORT
|
|
bool "Enable MPPE support"
|
|
depends on LWIP_PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable Microsoft Point-to-Point Encryption (MPPE) support
|
|
|
|
config LWIP_PPP_DEBUG_ON
|
|
bool "Enable PPP debug log output"
|
|
depends on LWIP_PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable PPP debug log output
|
|
|
|
menu "ICMP"
|
|
|
|
config LWIP_MULTICAST_PING
|
|
bool "Respond to multicast pings"
|
|
default n
|
|
|
|
config LWIP_BROADCAST_PING
|
|
bool "Respond to broadcast pings"
|
|
default n
|
|
|
|
endmenu # ICMP
|
|
|
|
menu "LWIP RAW API"
|
|
|
|
config LWIP_MAX_RAW_PCBS
|
|
int "Maximum LWIP RAW PCBs"
|
|
range 1 1024
|
|
default 16
|
|
help
|
|
The maximum number of simultaneously active LWIP
|
|
RAW protocol control blocks. The practical maximum
|
|
limit is determined by available heap memory at runtime.
|
|
|
|
endmenu # LWIP RAW API
|
|
|
|
menu "SNTP"
|
|
|
|
config LWIP_DHCP_MAX_NTP_SERVERS
|
|
int "Maximum number of NTP servers"
|
|
default 1
|
|
range 1 16
|
|
help
|
|
Set maximum number of NTP servers used by LwIP SNTP module.
|
|
First argument of sntp_setserver/sntp_setservername functions
|
|
is limited to this value.
|
|
|
|
config LWIP_SNTP_UPDATE_DELAY
|
|
int "Request interval to update time (ms)"
|
|
range 15000 4294967295
|
|
default 3600000
|
|
help
|
|
This option allows you to set the time update period via SNTP.
|
|
Default is 1 hour. Must not be below 15 seconds by specification.
|
|
(SNTPv4 RFC 4330 enforces a minimum update time of 15 seconds).
|
|
|
|
endmenu # SNTP
|
|
|
|
endmenu
|