OVMS3-idf/docs/en/get-started-legacy/add-idf_path-to-profile.rst
Angus Gratton 222146845c docs: Make CMake build system default, mark GNU Make as legacy option
All `-cmake` suffixes are removed
Where a GNU Make option is renamed, the `-legacy` suffix is used
2019-07-09 14:32:26 +10:00

67 lines
2.4 KiB
ReStructuredText

Add IDF_PATH to User Profile (Legacy GNU Make)
==============================================
:link_to_translation:`zh_CN:[中文]`
.. include:: ../gnu-make-legacy.rst
To preserve setting of ``IDF_PATH`` environment variable between system restarts, add it to the user profile, following instructions below.
.. _add-idf_path-to-profile-windows-legacy:
Windows
-------
The user profile scripts are contained in ``C:/msys32/etc/profile.d/`` directory. They are executed every time you open an MSYS2 window.
#. Create a new script file in ``C:/msys32/etc/profile.d/`` directory. Name it ``export_idf_path.sh``.
#. Identify the path to ESP-IDF directory. It is specific to your system configuration and may look something like ``C:\msys32\home\user-name\esp\esp-idf``
#. Add the ``export`` command to the script file, e.g.::
export IDF_PATH="C:/msys32/home/user-name/esp/esp-idf"
Remember to replace back-slashes with forward-slashes in the original Windows path.
#. Save the script file.
#. Close MSYS2 window and open it again. Check if ``IDF_PATH`` is set, by typing::
printenv IDF_PATH
The path previusly entered in the script file should be printed out.
If you do not like to have ``IDF_PATH`` set up permanently in user profile, you should enter it manually on opening of an MSYS2 window::
export IDF_PATH="C:/msys32/home/user-name/esp/esp-idf"
If you got here from section :ref:`get-started-setup-path-legacy`, while installing s/w for ESP32 development, then go back to section :ref:`get-started-start-project-legacy`.
.. _add-idf_path-to-profile-linux-macos-legacy:
Linux and MacOS
---------------
Set up ``IDF_PATH`` by adding the following line to ``~/.profile`` file::
export IDF_PATH=~/esp/esp-idf
Log off and log in back to make this change effective.
.. note::
If you have ``/bin/bash`` set as login shell, and both ``.bash_profile`` and ``.profile`` exist, then update ``.bash_profile`` instead.
Run the following command to check if ``IDF_PATH`` is set::
printenv IDF_PATH
The path previously entered in ``~/.profile`` file (or set manually) should be printed out.
If you do not like to have ``IDF_PATH`` set up permanently, you should enter it manually in terminal window on each restart or logout::
export IDF_PATH=~/esp/esp-idf
If you got here from section :ref:`get-started-setup-path-legacy`, while installing s/w for ESP32 development, then go back to section :ref:`get-started-start-project-legacy`.