Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/examples/bluetooth/blufi/main/blufi_example_main.c
Ivan Grokhotkov 979fce0df5 bt: call nvs_flash_init in examples, show error if NVS is not initialized 
NVS is used to store PHY calibration data, WiFi configuration, and BT
configuration. Previously BT examples did not call nvs_flash_init,
relying on the fact that it is called during PHY init. However PHY init
did not handle possible NVS initialization errors.

This change moves PHY init procedure into the application, and adds
diagnostic messages to BT config management routines if NVS is not
initialized.
2017-07-17 21:29:50 +08:00

367 lines
13 KiB
C
Raw Blame History

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/event_groups.h"
#include "esp_system.h"
#include "esp_wifi.h"
#include "esp_event_loop.h"
#include "esp_log.h"
#include "nvs_flash.h"
#include "bt.h"
#include "esp_blufi_api.h"
#include "esp_bt_defs.h"
#include "esp_gap_ble_api.h"
#include "esp_bt_main.h"
#include "esp_bt_device.h"
#include "blufi_example.h"
static void example_event_callback(esp_blufi_cb_event_t event, esp_blufi_cb_param_t *param);
#define BLUFI_DEVICE_NAME "BLUFI_DEVICE"
static uint8_t example_service_uuid128[32] = {
/* LSB <--------------------------------------------------------------------------------> MSB */
//first uuid, 16bit, [12],[13] is the value
0xfb, 0x34, 0x9b, 0x5f, 0x80, 0x00, 0x00, 0x80, 0x00, 0x10, 0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00,
};
//static uint8_t test_manufacturer[TEST_MANUFACTURER_DATA_LEN] = {0x12, 0x23, 0x45, 0x56};
static esp_ble_adv_data_t example_adv_data = {
.set_scan_rsp = false,
.include_name = true,
.include_txpower = true,
.min_interval = 0x100,
.max_interval = 0x100,
.appearance = 0x00,
.manufacturer_len = 0,
.p_manufacturer_data = NULL,
.service_data_len = 0,
.p_service_data = NULL,
.service_uuid_len = 16,
.p_service_uuid = example_service_uuid128,
.flag = 0x6,
};
static esp_ble_adv_params_t example_adv_params = {
.adv_int_min = 0x100,
.adv_int_max = 0x100,
.adv_type = ADV_TYPE_IND,
.own_addr_type = BLE_ADDR_TYPE_PUBLIC,
//.peer_addr =
//.peer_addr_type =
.channel_map = ADV_CHNL_ALL,
.adv_filter_policy = ADV_FILTER_ALLOW_SCAN_ANY_CON_ANY,
};
#define WIFI_LIST_NUM 10
static wifi_config_t sta_config;
static wifi_config_t ap_config;
/* FreeRTOS event group to signal when we are connected & ready to make a request */
static EventGroupHandle_t wifi_event_group;
/* The event group allows multiple bits for each event,
but we only care about one event - are we connected
to the AP with an IP? */
const int CONNECTED_BIT = BIT0;
/* store the station info for send back to phone */
static bool gl_sta_connected = false;
static uint8_t gl_sta_bssid[6];
static uint8_t gl_sta_ssid[32];
static int gl_sta_ssid_len;
/* connect infor*/
static uint8_t server_if;
static uint16_t conn_id;
static esp_err_t example_net_event_handler(void *ctx, system_event_t *event)
{
wifi_mode_t mode;
switch (event->event_id) {
case SYSTEM_EVENT_STA_START:
esp_wifi_connect();
break;
case SYSTEM_EVENT_STA_GOT_IP: {
esp_blufi_extra_info_t info;
xEventGroupSetBits(wifi_event_group, CONNECTED_BIT);
esp_wifi_get_mode(&mode);
memset(&info, 0, sizeof(esp_blufi_extra_info_t));
memcpy(info.sta_bssid, gl_sta_bssid, 6);
info.sta_bssid_set = true;
info.sta_ssid = gl_sta_ssid;
info.sta_ssid_len = gl_sta_ssid_len;
esp_blufi_send_wifi_conn_report(mode, ESP_BLUFI_STA_CONN_SUCCESS, 0, &info);
break;
}
case SYSTEM_EVENT_STA_CONNECTED:
gl_sta_connected = true;
memcpy(gl_sta_bssid, event->event_info.connected.bssid, 6);
memcpy(gl_sta_ssid, event->event_info.connected.ssid, event->event_info.connected.ssid_len);
gl_sta_ssid_len = event->event_info.connected.ssid_len;
break;
case SYSTEM_EVENT_STA_DISCONNECTED:
/* This is a workaround as ESP32 WiFi libs don't currently
auto-reassociate. */
gl_sta_connected = false;
memset(gl_sta_ssid, 0, 32);
memset(gl_sta_bssid, 0, 6);
gl_sta_ssid_len = 0;
esp_wifi_connect();
xEventGroupClearBits(wifi_event_group, CONNECTED_BIT);
break;
case SYSTEM_EVENT_AP_START:
esp_wifi_get_mode(&mode);
/* TODO: get config or information of softap, then set to report extra_info */
if (gl_sta_connected) {
esp_blufi_send_wifi_conn_report(mode, ESP_BLUFI_STA_CONN_SUCCESS, 0, NULL);
} else {
esp_blufi_send_wifi_conn_report(mode, ESP_BLUFI_STA_CONN_FAIL, 0, NULL);
}
break;
default:
break;
}
return ESP_OK;
}
static void initialise_wifi(void)
{
tcpip_adapter_init();
wifi_event_group = xEventGroupCreate();
ESP_ERROR_CHECK( esp_event_loop_init(example_net_event_handler, NULL) );
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
ESP_ERROR_CHECK( esp_wifi_init(&cfg) );
ESP_ERROR_CHECK( esp_wifi_set_storage(WIFI_STORAGE_RAM) );
ESP_ERROR_CHECK( esp_wifi_set_mode(WIFI_MODE_STA) );
ESP_ERROR_CHECK( esp_wifi_start() );
}
static esp_blufi_callbacks_t example_callbacks = {
.event_cb = example_event_callback,
.negotiate_data_handler = blufi_dh_negotiate_data_handler,
.encrypt_func = blufi_aes_encrypt,
.decrypt_func = blufi_aes_decrypt,
.checksum_func = blufi_crc_checksum,
};
static void example_event_callback(esp_blufi_cb_event_t event, esp_blufi_cb_param_t *param)
{
/* actually, should post to blufi_task handle the procedure,
* now, as a example, we do it more simply */
switch (event) {
case ESP_BLUFI_EVENT_INIT_FINISH:
BLUFI_INFO("BLUFI init finish\n");
esp_ble_gap_set_device_name(BLUFI_DEVICE_NAME);
esp_ble_gap_config_adv_data(&example_adv_data);
break;
case ESP_BLUFI_EVENT_DEINIT_FINISH:
BLUFI_INFO("BLUFI deinit finish\n");
break;
case ESP_BLUFI_EVENT_BLE_CONNECT:
BLUFI_INFO("BLUFI ble connect\n");
server_if=param->connect.server_if;
conn_id=param->connect.conn_id;
esp_ble_gap_stop_advertising();
blufi_security_deinit();
blufi_security_init();
break;
case ESP_BLUFI_EVENT_BLE_DISCONNECT:
BLUFI_INFO("BLUFI ble disconnect\n");
esp_ble_gap_start_advertising(&example_adv_params);
break;
case ESP_BLUFI_EVENT_SET_WIFI_OPMODE:
BLUFI_INFO("BLUFI Set WIFI opmode %d\n", param->wifi_mode.op_mode);
ESP_ERROR_CHECK( esp_wifi_set_mode(param->wifi_mode.op_mode) );
break;
case ESP_BLUFI_EVENT_REQ_CONNECT_TO_AP:
BLUFI_INFO("BLUFI requset wifi connect to AP\n");
esp_wifi_connect();
break;
case ESP_BLUFI_EVENT_REQ_DISCONNECT_FROM_AP:
BLUFI_INFO("BLUFI requset wifi disconnect from AP\n");
esp_wifi_disconnect();
break;
case ESP_BLUFI_EVENT_GET_WIFI_STATUS: {
wifi_mode_t mode;
esp_blufi_extra_info_t info;
esp_wifi_get_mode(&mode);
if (gl_sta_connected ) {
memset(&info, 0, sizeof(esp_blufi_extra_info_t));
memcpy(info.sta_bssid, gl_sta_bssid, 6);
info.sta_bssid_set = true;
info.sta_ssid = gl_sta_ssid;
info.sta_ssid_len = gl_sta_ssid_len;
esp_blufi_send_wifi_conn_report(mode, ESP_BLUFI_STA_CONN_SUCCESS, 0, &info);
} else {
esp_blufi_send_wifi_conn_report(mode, ESP_BLUFI_STA_CONN_FAIL, 0, NULL);
}
BLUFI_INFO("BLUFI get wifi status from AP\n");
break;
}
case ESP_BLUFI_EVENT_RECV_SLAVE_DISCONNECT_BLE:
BLUFI_INFO("blufi close a gatt connection");
esp_blufi_close(server_if,conn_id);
break;
case ESP_BLUFI_EVENT_DEAUTHENTICATE_STA:
/* TODO */
break;
case ESP_BLUFI_EVENT_RECV_STA_BSSID:
memcpy(sta_config.sta.bssid, param->sta_bssid.bssid, 6);
sta_config.sta.bssid_set = 1;
esp_wifi_set_config(WIFI_IF_STA, &sta_config);
BLUFI_INFO("Recv STA BSSID %s\n", sta_config.sta.ssid);
break;
case ESP_BLUFI_EVENT_RECV_STA_SSID:
strncpy((char *)sta_config.sta.ssid, (char *)param->sta_ssid.ssid, param->sta_ssid.ssid_len);
sta_config.sta.ssid[param->sta_ssid.ssid_len] = '\0';
esp_wifi_set_config(WIFI_IF_STA, &sta_config);
BLUFI_INFO("Recv STA SSID %s\n", sta_config.sta.ssid);
break;
case ESP_BLUFI_EVENT_RECV_STA_PASSWD:
strncpy((char *)sta_config.sta.password, (char *)param->sta_passwd.passwd, param->sta_passwd.passwd_len);
sta_config.sta.password[param->sta_passwd.passwd_len] = '\0';
esp_wifi_set_config(WIFI_IF_STA, &sta_config);
BLUFI_INFO("Recv STA PASSWORD %s\n", sta_config.sta.password);
break;
case ESP_BLUFI_EVENT_RECV_SOFTAP_SSID:
strncpy((char *)ap_config.ap.ssid, (char *)param->softap_ssid.ssid, param->softap_ssid.ssid_len);
ap_config.ap.ssid_len = param->softap_ssid.ssid_len;
esp_wifi_set_config(WIFI_IF_AP, &ap_config);
BLUFI_INFO("Recv SOFTAP SSID %s, ssid len %d\n", ap_config.ap.ssid, ap_config.ap.ssid_len);
break;
case ESP_BLUFI_EVENT_RECV_SOFTAP_PASSWD:
strncpy((char *)ap_config.ap.password, (char *)param->softap_passwd.passwd, param->softap_passwd.passwd_len);
esp_wifi_set_config(WIFI_IF_AP, &ap_config);
BLUFI_INFO("Recv SOFTAP PASSWORD %s\n", ap_config.ap.password);
break;
case ESP_BLUFI_EVENT_RECV_SOFTAP_MAX_CONN_NUM:
if (param->softap_max_conn_num.max_conn_num > 4) {
return;
}
ap_config.ap.max_connection = param->softap_max_conn_num.max_conn_num;
esp_wifi_set_config(WIFI_IF_AP, &ap_config);
BLUFI_INFO("Recv SOFTAP MAX CONN NUM %d\n", ap_config.ap.max_connection);
break;
case ESP_BLUFI_EVENT_RECV_SOFTAP_AUTH_MODE:
if (param->softap_auth_mode.auth_mode >= WIFI_AUTH_MAX) {
return;
}
ap_config.ap.authmode = param->softap_auth_mode.auth_mode;
esp_wifi_set_config(WIFI_IF_AP, &ap_config);
BLUFI_INFO("Recv SOFTAP AUTH MODE %d\n", ap_config.ap.authmode);
break;
case ESP_BLUFI_EVENT_RECV_SOFTAP_CHANNEL:
if (param->softap_channel.channel > 13) {
return;
}
ap_config.ap.channel = param->softap_channel.channel;
esp_wifi_set_config(WIFI_IF_AP, &ap_config);
BLUFI_INFO("Recv SOFTAP CHANNEL %d\n", ap_config.ap.channel);
break;
case ESP_BLUFI_EVENT_RECV_USERNAME:
/* Not handle currently */
break;
case ESP_BLUFI_EVENT_RECV_CA_CERT:
/* Not handle currently */
break;
case ESP_BLUFI_EVENT_RECV_CLIENT_CERT:
/* Not handle currently */
break;
case ESP_BLUFI_EVENT_RECV_SERVER_CERT:
/* Not handle currently */
break;
case ESP_BLUFI_EVENT_RECV_CLIENT_PRIV_KEY:
/* Not handle currently */
break;;
case ESP_BLUFI_EVENT_RECV_SERVER_PRIV_KEY:
/* Not handle currently */
break;
default:
break;
}
}
static void example_gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param)
{
switch (event) {
case ESP_GAP_BLE_ADV_DATA_SET_COMPLETE_EVT:
esp_ble_gap_start_advertising(&example_adv_params);
break;
default:
break;
}
}
void app_main()
{
esp_err_t ret;
// Initialize NVS
ret = nvs_flash_init();
if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
ESP_ERROR_CHECK(nvs_flash_erase());
ret = nvs_flash_init();
}
ESP_ERROR_CHECK( ret );
initialise_wifi();
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
ret = esp_bt_controller_init(&bt_cfg);
if (ret) {
BLUFI_ERROR("%s initialize bt controller failed\n", __func__);
}
ret = esp_bt_controller_enable(ESP_BT_MODE_BTDM);
if (ret) {
BLUFI_ERROR("%s enable bt controller failed\n", __func__);
return;
}
ret = esp_bluedroid_init();
if (ret) {
BLUFI_ERROR("%s init bluedroid failed\n", __func__);
return;
}
ret = esp_bluedroid_enable();
if (ret) {
BLUFI_ERROR("%s init bluedroid failed\n", __func__);
return;
}
BLUFI_INFO("BD ADDR: "ESP_BD_ADDR_STR"\n", ESP_BD_ADDR_HEX(esp_bt_dev_get_address()));
BLUFI_INFO("BLUFI VERSION %04x\n", esp_blufi_get_version());
blufi_security_init();
esp_ble_gap_register_callback(example_gap_event_handler);
esp_blufi_register_callbacks(&example_callbacks);
esp_blufi_profile_init();
}
Reference in a new issue View git blame Copy permalink