Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/components/bt/bluedroid/bta/include/bta_api.h

2419 lines
99 KiB
C
Executable file
Raw Blame History

/******************************************************************************
*
* Copyright (C) 2003-2014 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This is the public interface file for BTA, Broadcom's Bluetooth
* application layer for mobile phones.
*
******************************************************************************/
#ifndef BTA_API_H
#define BTA_API_H
#include "bt_target.h"
#include "bt_types.h"
#include "btm_api.h"
// #include "uipc_msg.h"
#if BLE_INCLUDED == TRUE
#include "btm_ble_api.h"
#endif
/*****************************************************************************
** Constants and data types
*****************************************************************************/
/* Status Return Value */
#define BTA_SUCCESS 0 /* Successful operation. */
#define BTA_FAILURE 1 /* Generic failure. */
#define BTA_PENDING 2 /* API cannot be completed right now */
#define BTA_BUSY 3
#define BTA_NO_RESOURCES 4
#define BTA_WRONG_MODE 5
typedef UINT8 tBTA_STATUS;
/*
* Service ID
*
* NOTES: When you add a new Service ID for BTA AND require to change the value of BTA_MAX_SERVICE_ID,
* make sure that the correct security ID of the new service from Security service definitions (btm_api.h)
* should be added to bta_service_id_to_btm_srv_id_lkup_tbl table in bta_dm_act.c.
*/
#define BTA_RES_SERVICE_ID 0 /* Reserved */
#define BTA_SPP_SERVICE_ID 1 /* Serial port profile. */
#define BTA_DUN_SERVICE_ID 2 /* Dial-up networking profile. */
#define BTA_A2DP_SOURCE_SERVICE_ID 3 /* A2DP Source profile. */
#define BTA_LAP_SERVICE_ID 4 /* LAN access profile. */
#define BTA_HSP_SERVICE_ID 5 /* Headset profile. */
#define BTA_HFP_SERVICE_ID 6 /* Hands-free profile. */
#define BTA_OPP_SERVICE_ID 7 /* Object push */
#define BTA_FTP_SERVICE_ID 8 /* File transfer */
#define BTA_CTP_SERVICE_ID 9 /* Cordless Terminal */
#define BTA_ICP_SERVICE_ID 10 /* Intercom Terminal */
#define BTA_SYNC_SERVICE_ID 11 /* Synchronization */
#define BTA_BPP_SERVICE_ID 12 /* Basic printing profile */
#define BTA_BIP_SERVICE_ID 13 /* Basic Imaging profile */
#define BTA_PANU_SERVICE_ID 14 /* PAN User */
#define BTA_NAP_SERVICE_ID 15 /* PAN Network access point */
#define BTA_GN_SERVICE_ID 16 /* PAN Group Ad-hoc networks */
#define BTA_SAP_SERVICE_ID 17 /* SIM Access profile */
#define BTA_A2DP_SINK_SERVICE_ID 18 /* A2DP Sink */
#define BTA_AVRCP_SERVICE_ID 19 /* A/V remote control */
#define BTA_HID_SERVICE_ID 20 /* HID */
#define BTA_VDP_SERVICE_ID 21 /* Video distribution */
#define BTA_PBAP_SERVICE_ID 22 /* PhoneBook Access Server*/
#define BTA_HSP_HS_SERVICE_ID 23 /* HFP HS role */
#define BTA_HFP_HS_SERVICE_ID 24 /* HSP HS role */
#define BTA_MAP_SERVICE_ID 25 /* Message Access Profile */
#define BTA_MN_SERVICE_ID 26 /* Message Notification Service */
#define BTA_HDP_SERVICE_ID 27 /* Health Device Profile */
#define BTA_PCE_SERVICE_ID 28 /* PhoneBook Access Client*/
#define BTA_SDP_SERVICE_ID 29 /* SDP Search*/
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
/* BLE profile service ID */
#define BTA_BLE_SERVICE_ID 30 /* GATT profile */
// btla-specific ++
#define BTA_USER_SERVICE_ID 31 /* User requested UUID */
#define BTA_MAX_SERVICE_ID 32
// btla-specific --
#else
#define BTA_USER_SERVICE_ID 30 /* User requested UUID */
#define BTA_MAX_SERVICE_ID 31
#endif
/* service IDs (BTM_SEC_SERVICE_FIRST_EMPTY + 1) to (BTM_SEC_MAX_SERVICES - 1)
* are used by BTA JV */
#define BTA_FIRST_JV_SERVICE_ID (BTM_SEC_SERVICE_FIRST_EMPTY + 1)
#define BTA_LAST_JV_SERVICE_ID (BTM_SEC_MAX_SERVICES - 1)
typedef UINT8 tBTA_SERVICE_ID;
/* Service ID Mask */
#define BTA_RES_SERVICE_MASK 0x00000001 /* Reserved */
#define BTA_SPP_SERVICE_MASK 0x00000002 /* Serial port profile. */
#define BTA_DUN_SERVICE_MASK 0x00000004 /* Dial-up networking profile. */
#define BTA_FAX_SERVICE_MASK 0x00000008 /* Fax profile. */
#define BTA_LAP_SERVICE_MASK 0x00000010 /* LAN access profile. */
#define BTA_HSP_SERVICE_MASK 0x00000020 /* HSP AG role. */
#define BTA_HFP_SERVICE_MASK 0x00000040 /* HFP AG role */
#define BTA_OPP_SERVICE_MASK 0x00000080 /* Object push */
#define BTA_FTP_SERVICE_MASK 0x00000100 /* File transfer */
#define BTA_CTP_SERVICE_MASK 0x00000200 /* Cordless Terminal */
#define BTA_ICP_SERVICE_MASK 0x00000400 /* Intercom Terminal */
#define BTA_SYNC_SERVICE_MASK 0x00000800 /* Synchronization */
#define BTA_BPP_SERVICE_MASK 0x00001000 /* Print server */
#define BTA_BIP_SERVICE_MASK 0x00002000 /* Basic Imaging */
#define BTA_PANU_SERVICE_MASK 0x00004000 /* PAN User */
#define BTA_NAP_SERVICE_MASK 0x00008000 /* PAN Network access point */
#define BTA_GN_SERVICE_MASK 0x00010000 /* PAN Group Ad-hoc networks */
#define BTA_SAP_SERVICE_MASK 0x00020000 /* PAN Group Ad-hoc networks */
#define BTA_A2DP_SERVICE_MASK 0x00040000 /* Advanced audio distribution */
#define BTA_AVRCP_SERVICE_MASK 0x00080000 /* A/V remote control */
#define BTA_HID_SERVICE_MASK 0x00100000 /* HID */
#define BTA_VDP_SERVICE_MASK 0x00200000 /* Video distribution */
#define BTA_PBAP_SERVICE_MASK 0x00400000 /* Phone Book Server */
#define BTA_HSP_HS_SERVICE_MASK 0x00800000 /* HFP HS role */
#define BTA_HFP_HS_SERVICE_MASK 0x01000000 /* HSP HS role */
#define BTA_MAS_SERVICE_MASK 0x02000000 /* Message Access Profile */
#define BTA_MN_SERVICE_MASK 0x04000000 /* Message Notification Profile */
#define BTA_HL_SERVICE_MASK 0x08000000 /* Health Device Profile */
#define BTA_PCE_SERVICE_MASK 0x10000000 /* Phone Book Client */
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
#define BTA_BLE_SERVICE_MASK 0x20000000 /* GATT based service */
// btla-specific ++
#define BTA_USER_SERVICE_MASK 0x40000000 /* Message Notification Profile */
// btla-specific --
#else
// btla-specific ++
#define BTA_USER_SERVICE_MASK 0x20000000 /* Message Notification Profile */
// btla-specific --
#endif
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
#define BTA_ALL_SERVICE_MASK 0x3FFFFFFF /* All services supported by BTA. */
#else
#define BTA_ALL_SERVICE_MASK 0x1FFFFFFF /* All services supported by BTA. */
#endif
typedef UINT32 tBTA_SERVICE_MASK;
/* extended service mask, including mask with one or more GATT UUID */
typedef struct
{
tBTA_SERVICE_MASK srvc_mask;
UINT8 num_uuid;
tBT_UUID *p_uuid;
}tBTA_SERVICE_MASK_EXT;
/* Security Setting Mask */
#define BTA_SEC_NONE BTM_SEC_NONE /* No security. */
#define BTA_SEC_AUTHORIZE (BTM_SEC_IN_AUTHORIZE ) /* Authorization required (only needed for out going connection )*/
#define BTA_SEC_AUTHENTICATE (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_OUT_AUTHENTICATE) /* Authentication required. */
#define BTA_SEC_ENCRYPT (BTM_SEC_IN_ENCRYPT | BTM_SEC_OUT_ENCRYPT) /* Encryption required. */
#define BTA_SEC_MODE4_LEVEL4 (BTM_SEC_MODE4_LEVEL4) /* Mode 4 level 4 service, i.e. incoming/outgoing MITM and P-256 encryption */
#define BTA_SEC_MITM (BTM_SEC_IN_MITM | BTM_SEC_OUT_MITM) /* Man-In-The_Middle protection */
#define BTA_SEC_IN_16_DIGITS (BTM_SEC_IN_MIN_16_DIGIT_PIN) /* Min 16 digit for pin code */
typedef UINT16 tBTA_SEC;
/* Ignore for Discoverable, Connectable, Pairable and Connectable Paired only device modes */
#define BTA_DM_IGNORE 0x00FF
/* Ignore for Discoverable, Connectable only for LE modes */
#define BTA_DM_LE_IGNORE 0xFF00
#define BTA_APP_ID_PAN_MULTI 0xFE /* app id for pan multiple connection */
#define BTA_ALL_APP_ID 0xFF
/* Discoverable Modes */
#define BTA_DM_NON_DISC BTM_NON_DISCOVERABLE /* Device is not discoverable. */
#define BTA_DM_GENERAL_DISC BTM_GENERAL_DISCOVERABLE /* General discoverable. */
#define BTA_DM_LIMITED_DISC BTM_LIMITED_DISCOVERABLE /* Limited discoverable. */
#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
#define BTA_DM_BLE_NON_DISCOVERABLE BTM_BLE_NON_DISCOVERABLE /* Device is not LE discoverable */
#define BTA_DM_BLE_GENERAL_DISCOVERABLE BTM_BLE_GENERAL_DISCOVERABLE /* Device is LE General discoverable */
#define BTA_DM_BLE_LIMITED_DISCOVERABLE BTM_BLE_LIMITED_DISCOVERABLE /* Device is LE Limited discoverable */
#endif
typedef UINT16 tBTA_DM_DISC; /* this discoverability mode is a bit mask among BR mode and LE mode */
/* Connectable Modes */
#define BTA_DM_NON_CONN BTM_NON_CONNECTABLE /* Device is not connectable. */
#define BTA_DM_CONN BTM_CONNECTABLE /* Device is connectable. */
#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
#define BTA_DM_BLE_NON_CONNECTABLE BTM_BLE_NON_CONNECTABLE /* Device is LE non-connectable. */
#define BTA_DM_BLE_CONNECTABLE BTM_BLE_CONNECTABLE /* Device is LE connectable. */
#endif
// btla-specific ++
typedef UINT16 tBTA_DM_CONN;
#define BTA_TRANSPORT_UNKNOWN 0
#define BTA_TRANSPORT_BR_EDR BT_TRANSPORT_BR_EDR
#define BTA_TRANSPORT_LE BT_TRANSPORT_LE
typedef tBT_TRANSPORT tBTA_TRANSPORT;
/* Pairable Modes */
#define BTA_DM_PAIRABLE 1
#define BTA_DM_NON_PAIRABLE 0
/* Connectable Paired Only Mode */
#define BTA_DM_CONN_ALL 0
#define BTA_DM_CONN_PAIRED 1
/* Inquiry Modes */
#define BTA_DM_INQUIRY_NONE BTM_INQUIRY_NONE /*No BR inquiry. */
#define BTA_DM_GENERAL_INQUIRY BTM_GENERAL_INQUIRY /* Perform general inquiry. */
#define BTA_DM_LIMITED_INQUIRY BTM_LIMITED_INQUIRY /* Perform limited inquiry. */
#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
#define BTA_BLE_INQUIRY_NONE BTM_BLE_INQUIRY_NONE
#define BTA_BLE_GENERAL_INQUIRY BTM_BLE_GENERAL_INQUIRY /* Perform LE general inquiry. */
#define BTA_BLE_LIMITED_INQUIRY BTM_BLE_LIMITED_INQUIRY /* Perform LE limited inquiry. */
#endif
typedef UINT8 tBTA_DM_INQ_MODE;
/* Inquiry Filter Type */
#define BTA_DM_INQ_CLR BTM_CLR_INQUIRY_FILTER /* Clear inquiry filter. */
#define BTA_DM_INQ_DEV_CLASS BTM_FILTER_COND_DEVICE_CLASS /* Filter on device class. */
#define BTA_DM_INQ_BD_ADDR BTM_FILTER_COND_BD_ADDR /* Filter on a specific BD address. */
typedef UINT8 tBTA_DM_INQ_FILT;
/* Authorize Response */
#define BTA_DM_AUTH_PERM 0 /* Authorized for future connections to the service */
#define BTA_DM_AUTH_TEMP 1 /* Authorized for current connection only */
#define BTA_DM_NOT_AUTH 2 /* Not authorized for the service */
typedef UINT8 tBTA_AUTH_RESP;
/* M/S preferred roles */
#define BTA_ANY_ROLE 0x00
#define BTA_MASTER_ROLE_PREF 0x01
#define BTA_MASTER_ROLE_ONLY 0x02
#define BTA_SLAVE_ROLE_ONLY 0x03 /* Used for PANU only, skip role switch to master */
typedef UINT8 tBTA_PREF_ROLES;
enum
{
BTA_DM_NO_SCATTERNET, /* Device doesn't support scatternet, it might
support "role switch during connection" for
an incoming connection, when it already has
another connection in master role */
BTA_DM_PARTIAL_SCATTERNET, /* Device supports partial scatternet. It can have
simulateous connection in Master and Slave roles
for short period of time */
BTA_DM_FULL_SCATTERNET /* Device can have simultaneous connection in master
and slave roles */
};
/* Inquiry filter device class condition */
typedef struct
{
DEV_CLASS dev_class; /* device class of interest */
DEV_CLASS dev_class_mask; /* mask to determine the bits of device class of interest */
} tBTA_DM_COD_COND;
/* Inquiry Filter Condition */
typedef union
{
BD_ADDR bd_addr; /* BD address of device to filter. */
tBTA_DM_COD_COND dev_class_cond; /* Device class filter condition */
} tBTA_DM_INQ_COND;
/* Inquiry Parameters */
typedef struct
{
tBTA_DM_INQ_MODE mode; /* Inquiry mode, limited or general. */
UINT8 duration; /* Inquiry duration in 1.28 sec units. */
UINT8 max_resps; /* Maximum inquiry responses. Set to zero for unlimited responses. */
BOOLEAN report_dup; /* report duplicated inquiry response with higher RSSI value */
tBTA_DM_INQ_FILT filter_type; /* Filter condition type. */
tBTA_DM_INQ_COND filter_cond; /* Filter condition data. */
#if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE)
UINT8 intl_duration[4];/*duration array storing the interleave scan's time portions*/
#endif
} tBTA_DM_INQ;
typedef struct
{
UINT8 bta_dm_eir_min_name_len; /* minimum length of local name when it is shortened */
#if (BTA_EIR_CANNED_UUID_LIST == TRUE)
UINT8 bta_dm_eir_uuid16_len; /* length of 16-bit UUIDs */
UINT8 *bta_dm_eir_uuid16; /* 16-bit UUIDs */
#else
UINT32 uuid_mask[BTM_EIR_SERVICE_ARRAY_SIZE]; /* mask of UUID list in EIR */
#endif
INT8 *bta_dm_eir_inq_tx_power; /* Inquiry TX power */
UINT8 bta_dm_eir_flag_len; /* length of flags in bytes */
UINT8 *bta_dm_eir_flags; /* flags for EIR */
UINT8 bta_dm_eir_manufac_spec_len; /* length of manufacturer specific in bytes */
UINT8 *bta_dm_eir_manufac_spec; /* manufacturer specific */
UINT8 bta_dm_eir_additional_len; /* length of additional data in bytes */
UINT8 *bta_dm_eir_additional; /* additional data */
} tBTA_DM_EIR_CONF;
#if BLE_INCLUDED == TRUE
/* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */
#define BTA_BLE_LIMIT_DISC_FLAG BTM_BLE_LIMIT_DISC_FLAG
#define BTA_BLE_GEN_DISC_FLAG BTM_BLE_GEN_DISC_FLAG
#define BTA_BLE_BREDR_NOT_SPT BTM_BLE_BREDR_NOT_SPT
#define BTA_BLE_DMT_CONTROLLER_SPT BTM_BLE_DMT_CONTROLLER_SPT
#define BTA_BLE_DMT_HOST_SPT BTM_BLE_DMT_HOST_SPT
#define BTA_BLE_NON_LIMIT_DISC_FLAG BTM_BLE_NON_LIMIT_DISC_FLAG
#define BTA_BLE_ADV_FLAG_MASK BTM_BLE_ADV_FLAG_MASK
#define BTA_BLE_LIMIT_DISC_MASK BTM_BLE_LIMIT_DISC_MASK
/* ADV data bit mask */
#define BTA_BLE_AD_BIT_DEV_NAME BTM_BLE_AD_BIT_DEV_NAME
#define BTA_BLE_AD_BIT_FLAGS BTM_BLE_AD_BIT_FLAGS
#define BTA_BLE_AD_BIT_MANU BTM_BLE_AD_BIT_MANU
#define BTA_BLE_AD_BIT_TX_PWR BTM_BLE_AD_BIT_TX_PWR
#define BTA_BLE_AD_BIT_INT_RANGE BTM_BLE_AD_BIT_INT_RANGE
#define BTA_BLE_AD_BIT_SERVICE BTM_BLE_AD_BIT_SERVICE
#define BTA_BLE_AD_BIT_APPEARANCE BTM_BLE_AD_BIT_APPEARANCE
#define BTA_BLE_AD_BIT_PROPRIETARY BTM_BLE_AD_BIT_PROPRIETARY
#define BTA_DM_BLE_AD_BIT_SERVICE_SOL BTM_BLE_AD_BIT_SERVICE_SOL
#define BTA_DM_BLE_AD_BIT_SERVICE_DATA BTM_BLE_AD_BIT_SERVICE_DATA
#define BTA_DM_BLE_AD_BIT_SIGN_DATA BTM_BLE_AD_BIT_SIGN_DATA
#define BTA_DM_BLE_AD_BIT_SERVICE_128SOL BTM_BLE_AD_BIT_SERVICE_128SOL
#define BTA_DM_BLE_AD_BIT_PUBLIC_ADDR BTM_BLE_AD_BIT_PUBLIC_ADDR
#define BTA_DM_BLE_AD_BIT_RANDOM_ADDR BTM_BLE_AD_BIT_RANDOM_ADDR
#define BTA_DM_BLE_AD_BIT_SERVICE_128 BTM_BLE_AD_BIT_SERVICE_128 /*128-bit Service UUIDs*/
typedef tBTM_BLE_AD_MASK tBTA_BLE_AD_MASK;
/* slave preferred connection interval range */
typedef struct
{
UINT16 low;
UINT16 hi;
}tBTA_BLE_INT_RANGE;
/* Service tag supported in the device */
typedef struct
{
UINT8 num_service;
BOOLEAN list_cmpl;
UINT16 *p_uuid;
}tBTA_BLE_SERVICE;
typedef struct
{
UINT8 len;
UINT8 *p_val;
}tBTA_BLE_MANU;
typedef struct
{
UINT8 adv_type;
UINT8 len;
UINT8 *p_val; /* number of len byte */
}tBTA_BLE_PROP_ELEM;
/* vendor proprietary adv type */
typedef struct
{
UINT8 num_elem;
tBTA_BLE_PROP_ELEM *p_elem;
}tBTA_BLE_PROPRIETARY;
typedef struct
{
tBT_UUID service_uuid;
UINT8 len;
UINT8 *p_val;
}tBTA_BLE_SERVICE_DATA;
typedef tBTM_BLE_128SERVICE tBTA_BLE_128SERVICE;
typedef tBTM_BLE_32SERVICE tBTA_BLE_32SERVICE;
typedef struct
{
tBTA_BLE_INT_RANGE int_range; /* slave prefered conn interval range */
tBTA_BLE_MANU *p_manu; /* manufacturer data */
tBTA_BLE_SERVICE *p_services; /* 16 bits services */
tBTA_BLE_128SERVICE *p_services_128b; /* 128 bits service */
tBTA_BLE_32SERVICE *p_service_32b; /* 32 bits Service UUID */
tBTA_BLE_SERVICE *p_sol_services; /* 16 bits services Solicitation UUIDs */
tBTA_BLE_32SERVICE *p_sol_service_32b; /* List of 32 bit Service Solicitation UUIDs */
tBTA_BLE_128SERVICE *p_sol_service_128b;/* List of 128 bit Service Solicitation UUIDs */
tBTA_BLE_PROPRIETARY *p_proprietary; /* proprietary data */
tBTA_BLE_SERVICE_DATA *p_service_data; /* service data */
UINT16 appearance; /* appearance data */
UINT8 flag;
UINT8 tx_power;
}tBTA_BLE_ADV_DATA;
typedef void (tBTA_SET_ADV_DATA_CMPL_CBACK) (tBTA_STATUS status);
/* advertising channel map */
#define BTA_BLE_ADV_CHNL_37 BTM_BLE_ADV_CHNL_37
#define BTA_BLE_ADV_CHNL_38 BTM_BLE_ADV_CHNL_38
#define BTA_BLE_ADV_CHNL_39 BTM_BLE_ADV_CHNL_39
typedef tBTM_BLE_ADV_CHNL_MAP tBTA_BLE_ADV_CHNL_MAP; /* use as a bit mask */
/* advertising filter policy */
typedef tBTM_BLE_AFP tBTA_BLE_AFP;
/* adv event type */
#define BTA_BLE_CONNECT_EVT BTM_BLE_CONNECT_EVT /* Connectable undirected advertising */
#define BTA_BLE_CONNECT_DIR_EVT BTM_BLE_CONNECT_DIR_EVT /* Connectable directed advertising */
#define BTA_BLE_DISCOVER_EVT BTM_BLE_DISCOVER_EVT /* Scannable undirected advertising */
#define BTA_BLE_NON_CONNECT_EVT BTM_BLE_NON_CONNECT_EVT /* Non connectable undirected advertising */
typedef UINT8 tBTA_BLE_ADV_EVT;
/* adv tx power level */
#define BTA_BLE_ADV_TX_POWER_MIN 0 /* minimum tx power */
#define BTA_BLE_ADV_TX_POWER_LOW 1 /* low tx power */
#define BTA_BLE_ADV_TX_POWER_MID 2 /* middle tx power */
#define BTA_BLE_ADV_TX_POWER_UPPER 3 /* upper tx power */
#define BTA_BLE_ADV_TX_POWER_MAX 4 /* maximum tx power */
typedef UINT8 tBTA_BLE_ADV_TX_POWER;
/* advertising instance parameters */
typedef struct
{
UINT16 adv_int_min; /* minimum adv interval */
UINT16 adv_int_max; /* maximum adv interval */
tBTA_BLE_ADV_EVT adv_type; /* adv event type */
tBTA_BLE_ADV_CHNL_MAP channel_map; /* adv channel map */
tBTA_BLE_AFP adv_filter_policy; /* advertising filter policy */
tBTA_BLE_ADV_TX_POWER tx_power; /* adv tx power */
}tBTA_BLE_ADV_PARAMS;
/* These are the fields returned in each device adv packet. It
** is returned in the results callback if registered.
*/
typedef struct
{
UINT8 conn_mode;
tBTA_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */
UINT8 flag;
UINT8 tx_power_level;
UINT8 remote_name_len;
UINT8 *p_remote_name;
tBTA_BLE_SERVICE service;
} tBTA_BLE_INQ_DATA;
enum
{
BTA_BLE_BATCH_SCAN_MODE_PASS = 1,
BTA_BLE_BATCH_SCAN_MODE_ACTI = 2,
BTA_BLE_BATCH_SCAN_MODE_PASS_ACTI = 3
};
typedef UINT8 tBTA_BLE_BATCH_SCAN_MODE;
enum
{
BTA_BLE_DISCARD_OLD_ITEMS=0,
BTA_BLE_DISCARD_LOWER_RSSI_ITEMS=1
};
typedef UINT8 tBTA_BLE_DISCARD_RULE;
enum
{
BTA_BLE_ADV_SEEN_FIRST_TIME=0,
BTA_BLE_ADV_TRACKING_TIMEOUT=1
};
typedef UINT8 tBTA_BLE_ADV_CHANGE_REASON;
enum
{
BTA_BLE_BATCH_SCAN_ENB_EVT = 1,
BTA_BLE_BATCH_SCAN_CFG_STRG_EVT = 2,
BTA_BLE_BATCH_SCAN_DATA_EVT = 3,
BTA_BLE_BATCH_SCAN_THRES_EVT = 4,
BTA_BLE_BATCH_SCAN_PARAM_EVT = 5,
BTA_BLE_BATCH_SCAN_DIS_EVT = 6
};
typedef tBTM_BLE_BATCH_SCAN_EVT tBTA_BLE_BATCH_SCAN_EVT;
typedef tBTM_BLE_TRACK_ADV_ACTION tBTA_BLE_TRACK_ADV_ACTION;
#endif
/* BLE customer specific feature function type definitions */
/* data type used on customer specific feature for RSSI monitoring */
#define BTA_BLE_RSSI_ALERT_HI 0
#define BTA_BLE_RSSI_ALERT_RANGE 1
#define BTA_BLE_RSSI_ALERT_LO 2
typedef UINT8 tBTA_DM_BLE_RSSI_ALERT_TYPE;
#define BTA_BLE_RSSI_ALERT_NONE BTM_BLE_RSSI_ALERT_NONE /* (0) */
#define BTA_BLE_RSSI_ALERT_HI_BIT BTM_BLE_RSSI_ALERT_HI_BIT /* (1) */
#define BTA_BLE_RSSI_ALERT_RANGE_BIT BTM_BLE_RSSI_ALERT_RANGE_BIT /* (1 << 1) */
#define BTA_BLE_RSSI_ALERT_LO_BIT BTM_BLE_RSSI_ALERT_LO_BIT /* (1 << 2) */
typedef UINT8 tBTA_DM_BLE_RSSI_ALERT_MASK;
typedef void (tBTA_DM_BLE_RSSI_CBACK) (BD_ADDR bd_addr, tBTA_DM_BLE_RSSI_ALERT_TYPE alert_type, INT8 rssi);
/* max number of filter spot for different filter type */
#define BTA_DM_BLE_MAX_UUID_FILTER BTM_BLE_MAX_UUID_FILTER /* 8 */
#define BTA_DM_BLE_MAX_ADDR_FILTER BTM_BLE_MAX_ADDR_FILTER /* 8 */
#define BTA_DM_BLE_PF_STR_COND_MAX BTM_BLE_PF_STR_COND_MAX /* 4 apply to manu data , or local name */
#define BTA_DM_BLE_PF_STR_LEN_MAX BTM_BLE_PF_STR_LEN_MAX /* match for first 20 bytes */
#define BTA_DM_BLE_PF_LOGIC_OR 0
#define BTA_DM_BLE_PF_LOGIC_AND 1
typedef UINT8 tBTA_DM_BLE_PF_LOGIC_TYPE;
enum
{
BTA_DM_BLE_SCAN_COND_ADD,
BTA_DM_BLE_SCAN_COND_DELETE,
BTA_DM_BLE_SCAN_COND_CLEAR = 2
};
typedef UINT8 tBTA_DM_BLE_SCAN_COND_OP;
/* ADV payload filtering vendor specific call event */
enum
{
BTA_BLE_SCAN_PF_ENABLE_EVT = 7,
BTA_BLE_SCAN_PF_COND_EVT
};
/* filter selection bit index */
#define BTA_DM_BLE_PF_ADDR_FILTER BTM_BLE_PF_ADDR_FILTER
#define BTA_DM_BLE_PF_SRVC_DATA BTM_BLE_PF_SRVC_DATA
#define BTA_DM_BLE_PF_SRVC_UUID BTM_BLE_PF_SRVC_UUID
#define BTA_DM_BLE_PF_SRVC_SOL_UUID BTM_BLE_PF_SRVC_SOL_UUID
#define BTA_DM_BLE_PF_LOCAL_NAME BTM_BLE_PF_LOCAL_NAME
#define BTA_DM_BLE_PF_MANU_DATA BTM_BLE_PF_MANU_DATA
#define BTA_DM_BLE_PF_SRVC_DATA_PATTERN BTM_BLE_PF_SRVC_DATA_PATTERN
#define BTA_DM_BLE_PF_TYPE_ALL BTM_BLE_PF_TYPE_ALL
#define BTA_DM_BLE_PF_TYPE_MAX BTM_BLE_PF_TYPE_MAX
typedef UINT8 tBTA_DM_BLE_PF_COND_TYPE;
typedef union
{
UINT16 uuid16_mask;
UINT32 uuid32_mask;
UINT8 uuid128_mask[LEN_UUID_128];
}tBTA_DM_BLE_PF_COND_MASK;
typedef struct
{
tBLE_BD_ADDR *p_target_addr; /* target address, if NULL, generic UUID filter */
tBT_UUID uuid; /* UUID condition */
tBTA_DM_BLE_PF_LOGIC_TYPE cond_logic; /* AND/OR */
tBTA_DM_BLE_PF_COND_MASK *p_uuid_mask; /* UUID condition mask, if NULL, match exact as UUID condition */
}tBTA_DM_BLE_PF_UUID_COND;
typedef struct
{
UINT8 data_len; /* <= 20 bytes */
UINT8 *p_data;
}tBTA_DM_BLE_PF_LOCAL_NAME_COND;
typedef struct
{
UINT16 company_id; /* company ID */
UINT8 data_len; /* <= 20 bytes */
UINT8 *p_pattern;
UINT16 company_id_mask; /* UUID value mask */
UINT8 *p_pattern_mask; /* Manufacturer data matching mask, same length
as data pattern, set to all 0xff, match exact data */
}tBTA_DM_BLE_PF_MANU_COND;
typedef struct
{
UINT16 uuid; /* service ID */
UINT8 data_len; /* <= 20 bytes */
UINT8 *p_pattern;
UINT8 *p_pattern_mask; /* Service data matching mask, same length
as data pattern, set to all 0xff, match exact data */
}tBTA_DM_BLE_PF_SRVC_PATTERN_COND;
typedef union
{
tBLE_BD_ADDR target_addr;
tBTA_DM_BLE_PF_LOCAL_NAME_COND local_name; /* lcoal name filtering */
tBTA_DM_BLE_PF_MANU_COND manu_data; /* manufactuer data filtering */
tBTA_DM_BLE_PF_UUID_COND srvc_uuid; /* service UUID filtering */
tBTA_DM_BLE_PF_UUID_COND solicitate_uuid; /* solicitated service UUID filtering */
tBTA_DM_BLE_PF_SRVC_PATTERN_COND srvc_data; /* service data pattern */
}tBTA_DM_BLE_PF_COND_PARAM;
typedef UINT8 tBTA_DM_BLE_PF_FILT_INDEX;
typedef UINT8 tBTA_DM_BLE_PF_AVBL_SPACE;
typedef INT8 tBTA_DM_RSSI_VALUE;
typedef UINT8 tBTA_DM_LINK_QUALITY_VALUE;
typedef UINT8 tBTA_SIG_STRENGTH_MASK;
/* Security Callback Events */
#define BTA_DM_ENABLE_EVT 0 /* Enable Event */
#define BTA_DM_DISABLE_EVT 1 /* Disable Event */
#define BTA_DM_PIN_REQ_EVT 2 /* PIN request. */
#define BTA_DM_AUTH_CMPL_EVT 3 /* Authentication complete indication. */
#define BTA_DM_AUTHORIZE_EVT 4 /* Authorization request. */
#define BTA_DM_LINK_UP_EVT 5 /* Connection UP event */
#define BTA_DM_LINK_DOWN_EVT 6 /* Connection DOWN event */
#define BTA_DM_SIG_STRENGTH_EVT 7 /* Signal strength for bluetooth connection */
#define BTA_DM_BUSY_LEVEL_EVT 8 /* System busy level */
#define BTA_DM_BOND_CANCEL_CMPL_EVT 9 /* Bond cancel complete indication */
#define BTA_DM_SP_CFM_REQ_EVT 10 /* Simple Pairing User Confirmation request. */
#define BTA_DM_SP_KEY_NOTIF_EVT 11 /* Simple Pairing Passkey Notification */
#define BTA_DM_SP_RMT_OOB_EVT 12 /* Simple Pairing Remote OOB Data request. */
#define BTA_DM_SP_KEYPRESS_EVT 13 /* Key press notification event. */
#define BTA_DM_ROLE_CHG_EVT 14 /* Role Change event. */
#define BTA_DM_BLE_KEY_EVT 15 /* BLE SMP key event for peer device keys */
#define BTA_DM_BLE_SEC_REQ_EVT 16 /* BLE SMP security request */
#define BTA_DM_BLE_PASSKEY_NOTIF_EVT 17 /* SMP passkey notification event */
#define BTA_DM_BLE_PASSKEY_REQ_EVT 18 /* SMP passkey request event */
#define BTA_DM_BLE_OOB_REQ_EVT 19 /* SMP OOB request event */
#define BTA_DM_BLE_LOCAL_IR_EVT 20 /* BLE local IR event */
#define BTA_DM_BLE_LOCAL_ER_EVT 21 /* BLE local ER event */
#define BTA_DM_BLE_NC_REQ_EVT 22 /* SMP Numeric Comparison request event */
// btla-specific ++
#define BTA_DM_SP_RMT_OOB_EXT_EVT 23 /* Simple Pairing Remote OOB Extended Data request. */
#define BTA_DM_BLE_AUTH_CMPL_EVT 24 /* BLE Auth complete */
// btla-specific --
#define BTA_DM_DEV_UNPAIRED_EVT 25
#define BTA_DM_HW_ERROR_EVT 26 /* BT Chip H/W error */
#define BTA_DM_LE_FEATURES_READ 27 /* Cotroller specific LE features are read */
#define BTA_DM_ENER_INFO_READ 28 /* Energy info read */
typedef UINT8 tBTA_DM_SEC_EVT;
/* Structure associated with BTA_DM_ENABLE_EVT */
typedef struct
{
tBTA_STATUS status;
} tBTA_DM_ENABLE;
/* Structure associated with BTA_DM_PIN_REQ_EVT */
typedef struct
{
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */
BD_ADDR bd_addr; /* BD address peer device. */
DEV_CLASS dev_class; /* Class of Device */
BD_NAME bd_name; /* Name of peer device. */
BOOLEAN min_16_digit; /* TRUE if the pin returned must be at least 16 digits */
} tBTA_DM_PIN_REQ;
/* BLE related definition */
#define BTA_DM_AUTH_FAIL_BASE (HCI_ERR_MAX_ERR + 10)
#define BTA_DM_AUTH_CONVERT_SMP_CODE(x) (BTA_DM_AUTH_FAIL_BASE + (x))
#define BTA_DM_AUTH_SMP_PASSKEY_FAIL BTA_DM_AUTH_CONVERT_SMP_CODE (SMP_PASSKEY_ENTRY_FAIL)
#define BTA_DM_AUTH_SMP_OOB_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_OOB_FAIL)
#define BTA_DM_AUTH_SMP_PAIR_AUTH_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_AUTH_FAIL)
#define BTA_DM_AUTH_SMP_CONFIRM_VALUE_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_VALUE_ERR)
#define BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_NOT_SUPPORT)
#define BTA_DM_AUTH_SMP_ENC_KEY_SIZE (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_KEY_SIZE)
#define BTA_DM_AUTH_SMP_INVALID_CMD (BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_CMD)
#define BTA_DM_AUTH_SMP_UNKNOWN_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_FAIL_UNKNOWN)
#define BTA_DM_AUTH_SMP_REPEATED_ATTEMPT (BTA_DM_AUTH_FAIL_BASE + SMP_REPEATED_ATTEMPTS)
#define BTA_DM_AUTH_SMP_INVALID_PARAMETERS (BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_PARAMETERS)
#define BTA_DM_AUTH_SMP_INTERNAL_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_INTERNAL_ERR)
#define BTA_DM_AUTH_SMP_UNKNOWN_IO (BTA_DM_AUTH_FAIL_BASE + SMP_UNKNOWN_IO_CAP)
#define BTA_DM_AUTH_SMP_INIT_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_INIT_FAIL)
#define BTA_DM_AUTH_SMP_CONFIRM_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_FAIL)
#define BTA_DM_AUTH_SMP_BUSY (BTA_DM_AUTH_FAIL_BASE + SMP_BUSY)
#define BTA_DM_AUTH_SMP_ENC_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_FAIL)
#define BTA_DM_AUTH_SMP_RSP_TIMEOUT (BTA_DM_AUTH_FAIL_BASE + SMP_RSP_TIMEOUT)
/* connection parameter boundary value and dummy value */
#define BTA_DM_BLE_SCAN_INT_MIN BTM_BLE_SCAN_INT_MIN
#define BTA_DM_BLE_SCAN_INT_MAX BTM_BLE_SCAN_INT_MAX
#define BTA_DM_BLE_SCAN_WIN_MIN BTM_BLE_SCAN_WIN_MIN
#define BTA_DM_BLE_SCAN_WIN_MAX BTM_BLE_SCAN_WIN_MAX
#define BTA_DM_BLE_CONN_INT_MIN BTM_BLE_CONN_INT_MIN
#define BTA_DM_BLE_CONN_INT_MAX BTM_BLE_CONN_INT_MAX
#define BTA_DM_BLE_CONN_LATENCY_MAX BTM_BLE_CONN_LATENCY_MAX
#define BTA_DM_BLE_CONN_SUP_TOUT_MIN BTM_BLE_CONN_SUP_TOUT_MIN
#define BTA_DM_BLE_CONN_SUP_TOUT_MAX BTM_BLE_CONN_SUP_TOUT_MAX
#define BTA_DM_BLE_CONN_PARAM_UNDEF BTM_BLE_CONN_PARAM_UNDEF /* use this value when a specific value not to be overwritten */
#define BTA_LE_KEY_PENC BTM_LE_KEY_PENC /* encryption information of peer device */
#define BTA_LE_KEY_PID BTM_LE_KEY_PID /* identity key of the peer device */
#define BTA_LE_KEY_PCSRK BTM_LE_KEY_PCSRK /* peer SRK */
#define BTA_LE_KEY_LENC BTM_LE_KEY_LENC /* master role security information:div */
#define BTA_LE_KEY_LID BTM_LE_KEY_LID /* master device ID key */
#define BTA_LE_KEY_LCSRK BTM_LE_KEY_LCSRK /* local CSRK has been deliver to peer */
typedef UINT8 tBTA_LE_KEY_TYPE; /* can be used as a bit mask */
typedef tBTM_LE_PENC_KEYS tBTA_LE_PENC_KEYS ;
typedef tBTM_LE_PCSRK_KEYS tBTA_LE_PCSRK_KEYS;
typedef tBTM_LE_LENC_KEYS tBTA_LE_LENC_KEYS ;
typedef tBTM_LE_LCSRK_KEYS tBTA_LE_LCSRK_KEYS ;
typedef tBTM_LE_PID_KEYS tBTA_LE_PID_KEYS ;
typedef union
{
tBTA_LE_PENC_KEYS penc_key; /* received peer encryption key */
tBTA_LE_PCSRK_KEYS psrk_key; /* received peer device SRK */
tBTA_LE_PID_KEYS pid_key; /* peer device ID key */
tBTA_LE_LENC_KEYS lenc_key; /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/
tBTA_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/
tBTA_LE_PID_KEYS lid_key; /* local device ID key for the particular remote */
}tBTA_LE_KEY_VALUE;
#define BTA_BLE_LOCAL_KEY_TYPE_ID 1
#define BTA_BLE_LOCAL_KEY_TYPE_ER 2
typedef UINT8 tBTA_DM_BLE_LOCAL_KEY_MASK;
typedef struct
{
BT_OCTET16 ir;
BT_OCTET16 irk;
BT_OCTET16 dhk;
}tBTA_BLE_LOCAL_ID_KEYS;
#define BTA_DM_SEC_GRANTED BTA_SUCCESS
#define BTA_DM_SEC_PAIR_NOT_SPT BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT
#define BTA_DM_SEC_REP_ATTEMPTS BTA_DM_AUTH_SMP_REPEATED_ATTEMPT
typedef UINT8 tBTA_DM_BLE_SEC_GRANT;
#define BTA_DM_BLE_ONN_NONE BTM_BLE_CONN_NONE
#define BTA_DM_BLE_CONN_AUTO BTM_BLE_CONN_AUTO
#define BTA_DM_BLE_CONN_SELECTIVE BTM_BLE_CONN_SELECTIVE
typedef UINT8 tBTA_DM_BLE_CONN_TYPE;
typedef BOOLEAN (tBTA_DM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name);
/* Structure associated with BTA_DM_BLE_SEC_REQ_EVT */
typedef struct
{
BD_ADDR bd_addr; /* peer address */
BD_NAME bd_name; /* peer device name */
} tBTA_DM_BLE_SEC_REQ;
typedef struct
{
BD_ADDR bd_addr; /* peer address */
tBTM_LE_KEY_TYPE key_type;
tBTM_LE_KEY_VALUE *p_key_value;
}tBTA_DM_BLE_KEY;
/* Structure associated with BTA_DM_AUTH_CMPL_EVT */
typedef struct
{
BD_ADDR bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
BOOLEAN key_present; /* Valid link key value in key element */
LINK_KEY key; /* Link key associated with peer device. */
UINT8 key_type; /* The type of Link Key */
BOOLEAN success; /* TRUE of authentication succeeded, FALSE if failed. */
UINT8 fail_reason; /* The HCI reason/error code for when success=FALSE */
tBLE_ADDR_TYPE addr_type; /* Peer device address type */
tBT_DEVICE_TYPE dev_type;
} tBTA_DM_AUTH_CMPL;
/* Structure associated with BTA_DM_AUTHORIZE_EVT */
typedef struct
{
BD_ADDR bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
tBTA_SERVICE_ID service; /* Service ID to authorize. */
// btla-specific ++
DEV_CLASS dev_class;
// btla-specific --
} tBTA_DM_AUTHORIZE;
/* Structure associated with BTA_DM_LINK_UP_EVT */
typedef struct
{
BD_ADDR bd_addr; /* BD address peer device. */
#if BLE_INCLUDED == TRUE
tBTA_TRANSPORT link_type;
#endif
} tBTA_DM_LINK_UP;
/* Structure associated with BTA_DM_LINK_DOWN_EVT */
typedef struct
{
BD_ADDR bd_addr; /* BD address peer device. */
UINT8 status; /* connection open/closed */
BOOLEAN is_removed; /* TRUE if device is removed when link is down */
#if BLE_INCLUDED == TRUE
tBTA_TRANSPORT link_type;
#endif
} tBTA_DM_LINK_DOWN;
/* Structure associated with BTA_DM_ROLE_CHG_EVT */
typedef struct
{
BD_ADDR bd_addr; /* BD address peer device. */
UINT8 new_role; /* the new connection role */
} tBTA_DM_ROLE_CHG;
/* Structure associated with BTA_DM_BUSY_LEVEL_EVT */
typedef struct
{
UINT8 level; /* when paging or inquiring, level is 10.
Otherwise, the number of ACL links */
UINT8 level_flags; /* indicates individual flags */
} tBTA_DM_BUSY_LEVEL;
#define BTA_IO_CAP_OUT BTM_IO_CAP_OUT /* 0 DisplayOnly */
#define BTA_IO_CAP_IO BTM_IO_CAP_IO /* 1 DisplayYesNo */
#define BTA_IO_CAP_IN BTM_IO_CAP_IN /* 2 KeyboardOnly */
#define BTA_IO_CAP_NONE BTM_IO_CAP_NONE /* 3 NoInputNoOutput */
#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
#define BTA_IO_CAP_KBDISP BTM_IO_CAP_KBDISP /* 4 Keyboard display */
#endif
typedef tBTM_IO_CAP tBTA_IO_CAP;
#define BTA_AUTH_SP_NO BTM_AUTH_SP_NO /* 0 MITM Protection Not Required - Single Profile/non-bonding
Numeric comparison with automatic accept allowed */
#define BTA_AUTH_SP_YES BTM_AUTH_SP_YES /* 1 MITM Protection Required - Single Profile/non-bonding
Use IO Capabilities to determine authentication procedure */
#define BTA_AUTH_AP_NO BTM_AUTH_AP_NO /* 2 MITM Protection Not Required - All Profiles/dedicated bonding
Numeric comparison with automatic accept allowed */
#define BTA_AUTH_AP_YES BTM_AUTH_AP_YES /* 3 MITM Protection Required - All Profiles/dedicated bonding
Use IO Capabilities to determine authentication procedure */
#define BTA_AUTH_SPGB_NO BTM_AUTH_SPGB_NO /* 4 MITM Protection Not Required - Single Profiles/general bonding
Numeric comparison with automatic accept allowed */
#define BTA_AUTH_SPGB_YES BTM_AUTH_SPGB_YES /* 5 MITM Protection Required - Single Profiles/general bonding
Use IO Capabilities to determine authentication procedure */
typedef tBTM_AUTH_REQ tBTA_AUTH_REQ;
#define BTA_AUTH_DD_BOND BTM_AUTH_DD_BOND /* 2 this bit is set for dedicated bonding */
#define BTA_AUTH_GEN_BOND BTM_AUTH_SPGB_NO /* 4 this bit is set for general bonding */
#define BTA_AUTH_BONDS BTM_AUTH_BONDS /* 6 the general/dedicated bonding bits */
#define BTA_LE_AUTH_NO_BOND BTM_LE_AUTH_REQ_NO_BOND /* 0*/
#define BTA_LE_AUTH_BOND BTM_LE_AUTH_REQ_BOND /* 1 << 0 */
#define BTA_LE_AUTH_REQ_MITM BTM_LE_AUTH_REQ_MITM /* 1 << 2 */
#define BTA_LE_AUTH_REQ_SC_ONLY BTM_LE_AUTH_REQ_SC_ONLY /* 1 << 3 */
#define BTA_LE_AUTH_REQ_SC_BOND BTM_LE_AUTH_REQ_SC_BOND /* 1001 */
#define BTA_LE_AUTH_REQ_SC_MITM BTM_LE_AUTH_REQ_SC_MITM /* 1100 */
#define BTA_LE_AUTH_REQ_SC_MITM_BOND BTM_LE_AUTH_REQ_SC_MITM_BOND /* 1101 */
typedef tBTM_LE_AUTH_REQ tBTA_LE_AUTH_REQ; /* combination of the above bit pattern */
#define BTA_OOB_NONE BTM_OOB_NONE
#define BTA_OOB_PRESENT BTM_OOB_PRESENT
#if BTM_OOB_INCLUDED == TRUE
#define BTA_OOB_UNKNOWN BTM_OOB_UNKNOWN
#endif
typedef tBTM_OOB_DATA tBTA_OOB_DATA;
/* Structure associated with BTA_DM_SP_CFM_REQ_EVT */
typedef struct
{
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */
BD_ADDR bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
UINT32 num_val; /* the numeric value for comparison. If just_works, do not show this number to UI */
BOOLEAN just_works; /* TRUE, if "Just Works" association model */
tBTA_AUTH_REQ loc_auth_req; /* Authentication required for local device */
tBTA_AUTH_REQ rmt_auth_req; /* Authentication required for peer device */
tBTA_IO_CAP loc_io_caps; /* IO Capabilities of local device */
tBTA_AUTH_REQ rmt_io_caps; /* IO Capabilities of remote device */
} tBTA_DM_SP_CFM_REQ;
enum
{
BTA_SP_KEY_STARTED, /* passkey entry started */
BTA_SP_KEY_ENTERED, /* passkey digit entered */
BTA_SP_KEY_ERASED, /* passkey digit erased */
BTA_SP_KEY_CLEARED, /* passkey cleared */
BTA_SP_KEY_COMPLT /* passkey entry completed */
};
typedef UINT8 tBTA_SP_KEY_TYPE;
/* Structure associated with BTA_DM_SP_KEYPRESS_EVT */
typedef struct
{
BD_ADDR bd_addr; /* peer address */
tBTA_SP_KEY_TYPE notif_type;
}tBTA_DM_SP_KEY_PRESS;
/* Structure associated with BTA_DM_SP_KEY_NOTIF_EVT */
typedef struct
{
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */
BD_ADDR bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
UINT32 passkey; /* the numeric value for comparison. If just_works, do not show this number to UI */
} tBTA_DM_SP_KEY_NOTIF;
/* Structure associated with BTA_DM_SP_RMT_OOB_EVT */
typedef struct
{
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */
BD_ADDR bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
} tBTA_DM_SP_RMT_OOB;
/* Structure associated with BTA_DM_BOND_CANCEL_CMPL_EVT */
typedef struct
{
tBTA_STATUS result; /* TRUE of bond cancel succeeded, FALSE if failed. */
} tBTA_DM_BOND_CANCEL_CMPL;
/* Union of all security callback structures */
typedef union
{
tBTA_DM_ENABLE enable; /* BTA enabled */
tBTA_DM_PIN_REQ pin_req; /* PIN request. */
tBTA_DM_AUTH_CMPL auth_cmpl; /* Authentication complete indication. */
tBTA_DM_AUTHORIZE authorize; /* Authorization request. */
tBTA_DM_LINK_UP link_up; /* ACL connection down event */
tBTA_DM_LINK_DOWN link_down; /* ACL connection down event */
tBTA_DM_BUSY_LEVEL busy_level; /* System busy level */
tBTA_DM_SP_CFM_REQ cfm_req; /* user confirm request */
tBTA_DM_SP_KEY_NOTIF key_notif; /* passkey notification */
tBTA_DM_SP_RMT_OOB rmt_oob; /* remote oob */
tBTA_DM_BOND_CANCEL_CMPL bond_cancel_cmpl; /* Bond Cancel Complete indication */
tBTA_DM_SP_KEY_PRESS key_press; /* key press notification event */
tBTA_DM_ROLE_CHG role_chg; /* role change event */
tBTA_DM_BLE_SEC_REQ ble_req; /* BLE SMP related request */
tBTA_DM_BLE_KEY ble_key; /* BLE SMP keys used when pairing */
tBTA_BLE_LOCAL_ID_KEYS ble_id_keys; /* IR event */
BT_OCTET16 ble_er; /* ER event data */
} tBTA_DM_SEC;
/* Security callback */
typedef void (tBTA_DM_SEC_CBACK)(tBTA_DM_SEC_EVT event, tBTA_DM_SEC *p_data);
#define BTA_BLE_MULTI_ADV_ILLEGAL 0
/* multi adv callback event */
#define BTA_BLE_MULTI_ADV_ENB_EVT 1
#define BTA_BLE_MULTI_ADV_DISABLE_EVT 2
#define BTA_BLE_MULTI_ADV_PARAM_EVT 3
#define BTA_BLE_MULTI_ADV_DATA_EVT 4
typedef UINT8 tBTA_BLE_MULTI_ADV_EVT;
/* multi adv callback */
typedef void (tBTA_BLE_MULTI_ADV_CBACK)(tBTA_BLE_MULTI_ADV_EVT event,
UINT8 inst_id, void *p_ref, tBTA_STATUS status);
typedef UINT32 tBTA_DM_BLE_REF_VALUE;
#define BTA_DM_BLE_PF_ENABLE_EVT BTM_BLE_PF_ENABLE
#define BTA_DM_BLE_PF_CONFIG_EVT BTM_BLE_PF_CONFIG
typedef UINT8 tBTA_DM_BLE_PF_EVT;
#define BTA_DM_BLE_PF_ENABLE 1
#define BTA_DM_BLE_PF_CONFIG 2
typedef UINT8 tBTA_DM_BLE_PF_ACTION;
/* Config callback */
typedef void (tBTA_DM_BLE_PF_CFG_CBACK) (tBTA_DM_BLE_PF_ACTION action,
tBTA_DM_BLE_PF_COND_TYPE cfg_cond,
tBTA_DM_BLE_PF_AVBL_SPACE avbl_space, tBTA_STATUS status,
tBTA_DM_BLE_REF_VALUE ref_value);
/* Param callback */
typedef void (tBTA_DM_BLE_PF_PARAM_CBACK) (UINT8 action_type, tBTA_DM_BLE_PF_AVBL_SPACE avbl_space,
tBTA_DM_BLE_REF_VALUE ref_value, tBTA_STATUS status);
/* Status callback */
typedef void (tBTA_DM_BLE_PF_STATUS_CBACK) (UINT8 action, tBTA_STATUS status,
tBTA_DM_BLE_REF_VALUE ref_value);
#define BTA_DM_BLE_PF_BRDCAST_ADDR_FILT 1
#define BTA_DM_BLE_PF_SERV_DATA_CHG_FILT 2
#define BTA_DM_BLE_PF_SERV_UUID 4
#define BTA_DM_BLE_PF_SERV_SOLC_UUID 8
#define BTA_DM_BLE_PF_LOC_NAME_CHECK 16
#define BTA_DM_BLE_PF_MANUF_NAME_CHECK 32
#define BTA_DM_BLE_PF_SERV_DATA_CHECK 64
typedef UINT16 tBTA_DM_BLE_PF_FEAT_SEL;
#define BTA_DM_BLE_PF_LIST_LOGIC_OR 1
#define BTA_DM_BLE_PF_LIST_LOGIC_AND 2
typedef UINT16 tBTA_DM_BLE_PF_LIST_LOGIC_TYPE;
#define BTA_DM_BLE_PF_FILT_LOGIC_OR 0
#define BTA_DM_BLE_PF_FILT_LOGIC_AND 1
typedef UINT16 tBTA_DM_BLE_PF_FILT_LOGIC_TYPE;
typedef UINT8 tBTA_DM_BLE_PF_RSSI_THRESHOLD;
typedef UINT8 tBTA_DM_BLE_PF_DELIVERY_MODE;
typedef UINT16 tBTA_DM_BLE_PF_TIMEOUT;
typedef UINT8 tBTA_DM_BLE_PF_TIMEOUT_CNT;
typedef UINT16 tBTA_DM_BLE_PF_ADV_TRACK_ENTRIES;
typedef struct
{
tBTA_DM_BLE_PF_FEAT_SEL feat_seln;
tBTA_DM_BLE_PF_LIST_LOGIC_TYPE list_logic_type;
tBTA_DM_BLE_PF_FILT_LOGIC_TYPE filt_logic_type;
tBTA_DM_BLE_PF_RSSI_THRESHOLD rssi_high_thres;
tBTA_DM_BLE_PF_RSSI_THRESHOLD rssi_low_thres;
tBTA_DM_BLE_PF_DELIVERY_MODE dely_mode;
tBTA_DM_BLE_PF_TIMEOUT found_timeout;
tBTA_DM_BLE_PF_TIMEOUT lost_timeout;
tBTA_DM_BLE_PF_TIMEOUT_CNT found_timeout_cnt;
tBTA_DM_BLE_PF_ADV_TRACK_ENTRIES num_of_tracking_entries;
} tBTA_DM_BLE_PF_FILT_PARAMS;
/* Search callback events */
#define BTA_DM_INQ_RES_EVT 0 /* Inquiry result for a peer device. */
#define BTA_DM_INQ_CMPL_EVT 1 /* Inquiry complete. */
#define BTA_DM_DISC_RES_EVT 2 /* Discovery result for a peer device. */
#define BTA_DM_DISC_BLE_RES_EVT 3 /* Discovery result for BLE GATT based servoce on a peer device. */
#define BTA_DM_DISC_CMPL_EVT 4 /* Discovery complete. */
#define BTA_DM_DI_DISC_CMPL_EVT 5 /* Discovery complete. */
#define BTA_DM_SEARCH_CANCEL_CMPL_EVT 6 /* Search cancelled */
typedef UINT8 tBTA_DM_SEARCH_EVT;
#define BTA_DM_INQ_RES_IGNORE_RSSI BTM_INQ_RES_IGNORE_RSSI /* 0x7f RSSI value not supplied (ignore it) */
/* Structure associated with BTA_DM_INQ_RES_EVT */
typedef struct
{
BD_ADDR bd_addr; /* BD address peer device. */
DEV_CLASS dev_class; /* Device class of peer device. */
BOOLEAN remt_name_not_required; /* Application sets this flag if it already knows the name of the device */
/* If the device name is known to application BTA skips the remote name request */
BOOLEAN is_limited; /* TRUE, if the limited inquiry bit is set in the CoD */
INT8 rssi; /* The rssi value */
UINT8 *p_eir; /* received EIR */
#if (BLE_INCLUDED == TRUE)
UINT8 inq_result_type;
UINT8 ble_addr_type;
tBTM_BLE_EVT_TYPE ble_evt_type;
tBT_DEVICE_TYPE device_type;
UINT8 flag;
#endif
} tBTA_DM_INQ_RES;
/* Structure associated with BTA_DM_INQ_CMPL_EVT */
typedef struct
{
UINT8 num_resps; /* Number of inquiry responses. */
} tBTA_DM_INQ_CMPL;
/* Structure associated with BTA_DM_DI_DISC_CMPL_EVT */
typedef struct
{
BD_ADDR bd_addr; /* BD address peer device. */
UINT8 num_record; /* Number of DI record */
tBTA_STATUS result;
} tBTA_DM_DI_DISC_CMPL;
/* Structure associated with BTA_DM_DISC_RES_EVT */
typedef struct
{
BD_ADDR bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
tBTA_SERVICE_MASK services; /* Services found on peer device. */
// btla-specific ++
UINT8 * p_raw_data; /* Raw data for discovery DB */
UINT32 raw_data_size; /* size of raw data */
tBT_DEVICE_TYPE device_type; /* device type in case it is BLE device */
UINT32 num_uuids;
UINT8 *p_uuid_list;
// btla-specific --
tBTA_STATUS result;
} tBTA_DM_DISC_RES;
/* Structure associated with tBTA_DM_DISC_BLE_RES */
typedef struct
{
BD_ADDR bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
tBT_UUID service; /* GATT based Services UUID found on peer device. */
} tBTA_DM_DISC_BLE_RES;
/* Union of all search callback structures */
typedef union
{
tBTA_DM_INQ_RES inq_res; /* Inquiry result for a peer device. */
tBTA_DM_INQ_CMPL inq_cmpl; /* Inquiry complete. */
tBTA_DM_DISC_RES disc_res; /* Discovery result for a peer device. */
tBTA_DM_DISC_BLE_RES disc_ble_res; /* discovery result for GATT based service */
tBTA_DM_DI_DISC_CMPL di_disc; /* DI discovery result for a peer device */
} tBTA_DM_SEARCH;
/* Search callback */
typedef void (tBTA_DM_SEARCH_CBACK)(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data);
/* Execute call back */
typedef void (tBTA_DM_EXEC_CBACK) (void * p_param);
/* Encryption callback*/
typedef void (tBTA_DM_ENCRYPT_CBACK) (BD_ADDR bd_addr, tBTA_TRANSPORT transport, tBTA_STATUS result);
#if BLE_INCLUDED == TRUE
#define BTA_DM_BLE_SEC_NONE BTM_BLE_SEC_NONE
#define BTA_DM_BLE_SEC_ENCRYPT BTM_BLE_SEC_ENCRYPT
#define BTA_DM_BLE_SEC_NO_MITM BTM_BLE_SEC_ENCRYPT_NO_MITM
#define BTA_DM_BLE_SEC_MITM BTM_BLE_SEC_ENCRYPT_MITM
typedef tBTM_BLE_SEC_ACT tBTA_DM_BLE_SEC_ACT;
typedef tBTM_BLE_TX_TIME_MS tBTA_DM_BLE_TX_TIME_MS;
typedef tBTM_BLE_RX_TIME_MS tBTA_DM_BLE_RX_TIME_MS;
typedef tBTM_BLE_IDLE_TIME_MS tBTA_DM_BLE_IDLE_TIME_MS;
typedef tBTM_BLE_ENERGY_USED tBTA_DM_BLE_ENERGY_USED;
#define BTA_DM_CONTRL_UNKNOWN 0 /* Unknown state */
#define BTA_DM_CONTRL_ACTIVE 1 /* ACL link on, SCO link ongoing, sniff mode */
#define BTA_DM_CONTRL_SCAN 2 /* Scan state - paging/inquiry/trying to connect*/
#define BTA_DM_CONTRL_IDLE 3 /* Idle state - page scan, LE advt, inquiry scan */
typedef UINT8 tBTA_DM_CONTRL_STATE;
typedef UINT8 tBTA_DM_BLE_ADV_STATE;
typedef UINT8 tBTA_DM_BLE_ADV_INFO_PRESENT;
typedef UINT8 tBTA_DM_BLE_RSSI_VALUE;
typedef UINT16 tBTA_DM_BLE_ADV_INFO_TIMESTAMP;
typedef tBTM_BLE_TRACK_ADV_DATA tBTA_DM_BLE_TRACK_ADV_DATA;
typedef void (tBTA_BLE_SCAN_THRESHOLD_CBACK)(tBTA_DM_BLE_REF_VALUE ref_value);
typedef void (tBTA_BLE_SCAN_REP_CBACK) (tBTA_DM_BLE_REF_VALUE ref_value, UINT8 report_format,
UINT8 num_records, UINT16 data_len,
UINT8* p_rep_data, tBTA_STATUS status);
typedef void (tBTA_BLE_SCAN_SETUP_CBACK) (tBTA_BLE_BATCH_SCAN_EVT evt,
tBTA_DM_BLE_REF_VALUE ref_value,
tBTA_STATUS status);
typedef void (tBTA_BLE_TRACK_ADV_CMPL_CBACK)(int action, tBTA_STATUS status,
tBTA_DM_BLE_PF_AVBL_SPACE avbl_space,
tBTA_DM_BLE_REF_VALUE ref_value);
typedef void (tBTA_BLE_TRACK_ADV_CBACK)(tBTA_DM_BLE_TRACK_ADV_DATA *p_adv_data);
typedef void (tBTA_BLE_ENERGY_INFO_CBACK)(tBTA_DM_BLE_TX_TIME_MS tx_time,
tBTA_DM_BLE_RX_TIME_MS rx_time,
tBTA_DM_BLE_IDLE_TIME_MS idle_time,
tBTA_DM_BLE_ENERGY_USED energy_used,
tBTA_DM_CONTRL_STATE ctrl_state,
tBTA_STATUS status);
#else
typedef UINT8 tBTA_DM_BLE_SEC_ACT;
#endif
/* Maximum service name length */
#define BTA_SERVICE_NAME_LEN 35
#define BTA_SERVICE_DESP_LEN BTA_SERVICE_NAME_LEN
#define BTA_PROVIDER_NAME_LEN BTA_SERVICE_NAME_LEN
/* link policy masks */
#define BTA_DM_LP_SWITCH HCI_ENABLE_MASTER_SLAVE_SWITCH
#define BTA_DM_LP_HOLD HCI_ENABLE_HOLD_MODE
#define BTA_DM_LP_SNIFF HCI_ENABLE_SNIFF_MODE
#define BTA_DM_LP_PARK HCI_ENABLE_PARK_MODE
typedef UINT16 tBTA_DM_LP_MASK;
/* power mode actions */
#define BTA_DM_PM_NO_ACTION 0x00 /* no change to the current pm setting */
#define BTA_DM_PM_PARK 0x10 /* prefers park mode */
#define BTA_DM_PM_SNIFF 0x20 /* prefers sniff mode */
#define BTA_DM_PM_SNIFF1 0x21 /* prefers sniff1 mode */
#define BTA_DM_PM_SNIFF2 0x22 /* prefers sniff2 mode */
#define BTA_DM_PM_SNIFF3 0x23 /* prefers sniff3 mode */
#define BTA_DM_PM_SNIFF4 0x24 /* prefers sniff4 mode */
#define BTA_DM_PM_SNIFF5 0x25 /* prefers sniff5 mode */
#define BTA_DM_PM_SNIFF6 0x26 /* prefers sniff6 mode */
#define BTA_DM_PM_SNIFF7 0x27 /* prefers sniff7 mode */
#define BTA_DM_PM_SNIFF_USER0 0x28 /* prefers user-defined sniff0 mode (testtool only) */
#define BTA_DM_PM_SNIFF_USER1 0x29 /* prefers user-defined sniff1 mode (testtool only) */
#define BTA_DM_PM_ACTIVE 0x40 /* prefers active mode */
#define BTA_DM_PM_RETRY 0x80 /* retry power mode based on current settings */
#define BTA_DM_PM_SUSPEND 0x04 /* prefers suspend mode */
#define BTA_DM_PM_NO_PREF 0x01 /* service has no prefernce on power mode setting. eg. connection to service got closed */
typedef UINT8 tBTA_DM_PM_ACTION;
/* index to bta_dm_ssr_spec */
#define BTA_DM_PM_SSR0 0
#define BTA_DM_PM_SSR1 1 /* BTA_DM_PM_SSR1 will be dedicated for
HH SSR setting entry, no other profile can use it */
#define BTA_DM_PM_SSR2 2
#define BTA_DM_PM_SSR3 3
#define BTA_DM_PM_SSR4 4
#define BTA_DM_PM_SSR5 5
#define BTA_DM_PM_SSR6 6
#define BTA_DM_PM_NUM_EVTS 9
#ifndef BTA_DM_PM_PARK_IDX
#define BTA_DM_PM_PARK_IDX 5 /* the actual index to bta_dm_pm_md[] for PARK mode */
#endif
#ifndef BTA_DM_PM_SNIFF_A2DP_IDX
#define BTA_DM_PM_SNIFF_A2DP_IDX BTA_DM_PM_SNIFF
#endif
#ifndef BTA_DM_PM_SNIFF_HD_IDLE_IDX
#define BTA_DM_PM_SNIFF_HD_IDLE_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_SNIFF_SCO_OPEN_IDX
#define BTA_DM_PM_SNIFF_SCO_OPEN_IDX BTA_DM_PM_SNIFF3
#endif
#ifndef BTA_DM_PM_SNIFF_HD_ACTIVE_IDX
#define BTA_DM_PM_SNIFF_HD_ACTIVE_IDX BTA_DM_PM_SNIFF4
#endif
#ifndef BTA_DM_PM_SNIFF_HH_OPEN_IDX
#define BTA_DM_PM_SNIFF_HH_OPEN_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_SNIFF_HH_ACTIVE_IDX
#define BTA_DM_PM_SNIFF_HH_ACTIVE_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_SNIFF_HH_IDLE_IDX
#define BTA_DM_PM_SNIFF_HH_IDLE_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_HH_OPEN_DELAY
#define BTA_DM_PM_HH_OPEN_DELAY 30000
#endif
#ifndef BTA_DM_PM_HH_ACTIVE_DELAY
#define BTA_DM_PM_HH_ACTIVE_DELAY 30000
#endif
#ifndef BTA_DM_PM_HH_IDLE_DELAY
#define BTA_DM_PM_HH_IDLE_DELAY 30000
#endif
/* The Sniff Parameters defined below must be ordered from highest
* latency (biggest interval) to lowest latency. If there is a conflict
* among the connected services the setting with the lowest latency will
* be selected. If a device should override a sniff parameter then it
* must insure that order is maintained.
*/
#ifndef BTA_DM_PM_SNIFF_MAX
#define BTA_DM_PM_SNIFF_MAX 800
#define BTA_DM_PM_SNIFF_MIN 400
#define BTA_DM_PM_SNIFF_ATTEMPT 4
#define BTA_DM_PM_SNIFF_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF1_MAX
#define BTA_DM_PM_SNIFF1_MAX 400
#define BTA_DM_PM_SNIFF1_MIN 200
#define BTA_DM_PM_SNIFF1_ATTEMPT 4
#define BTA_DM_PM_SNIFF1_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF2_MAX
#define BTA_DM_PM_SNIFF2_MAX 180
#define BTA_DM_PM_SNIFF2_MIN 150
#define BTA_DM_PM_SNIFF2_ATTEMPT 4
#define BTA_DM_PM_SNIFF2_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF3_MAX
#define BTA_DM_PM_SNIFF3_MAX 150
#define BTA_DM_PM_SNIFF3_MIN 50
#define BTA_DM_PM_SNIFF3_ATTEMPT 4
#define BTA_DM_PM_SNIFF3_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF4_MAX
#define BTA_DM_PM_SNIFF4_MAX 54
#define BTA_DM_PM_SNIFF4_MIN 30
#define BTA_DM_PM_SNIFF4_ATTEMPT 4
#define BTA_DM_PM_SNIFF4_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF5_MAX
#define BTA_DM_PM_SNIFF5_MAX 36
#define BTA_DM_PM_SNIFF5_MIN 30
#define BTA_DM_PM_SNIFF5_ATTEMPT 2
#define BTA_DM_PM_SNIFF5_TIMEOUT 0
#endif
#ifndef BTA_DM_PM_PARK_MAX
#define BTA_DM_PM_PARK_MAX 800
#define BTA_DM_PM_PARK_MIN 400
#define BTA_DM_PM_PARK_ATTEMPT 0
#define BTA_DM_PM_PARK_TIMEOUT 0
#endif
/* Switch callback events */
#define BTA_DM_SWITCH_CMPL_EVT 0 /* Completion of the Switch API */
typedef UINT8 tBTA_DM_SWITCH_EVT;
typedef void (tBTA_DM_SWITCH_CBACK)(tBTA_DM_SWITCH_EVT event, tBTA_STATUS status);
/* Audio routing out configuration */
#define BTA_DM_ROUTE_NONE 0x00 /* No Audio output */
#define BTA_DM_ROUTE_DAC 0x01 /* routing over analog output */
#define BTA_DM_ROUTE_I2S 0x02 /* routing over digital (I2S) output */
#define BTA_DM_ROUTE_BT_MONO 0x04 /* routing over SCO */
#define BTA_DM_ROUTE_BT_STEREO 0x08 /* routing over BT Stereo */
#define BTA_DM_ROUTE_HOST 0x10 /* routing over Host */
#define BTA_DM_ROUTE_FMTX 0x20 /* routing over FMTX */
#define BTA_DM_ROUTE_FMRX 0x40 /* routing over FMRX */
#define BTA_DM_ROUTE_BTSNK 0x80 /* routing over BT SNK */
typedef UINT8 tBTA_DM_ROUTE_PATH;
/* Device Identification (DI) data structure
*/
/* Used to set the DI record */
typedef tSDP_DI_RECORD tBTA_DI_RECORD;
/* Used to get the DI record */
typedef tSDP_DI_GET_RECORD tBTA_DI_GET_RECORD;
/* SDP discovery database */
typedef tSDP_DISCOVERY_DB tBTA_DISCOVERY_DB;
#ifndef BTA_DI_NUM_MAX
#define BTA_DI_NUM_MAX 3
#endif
/* Device features mask definitions */
#define BTA_FEATURE_BYTES_PER_PAGE BTM_FEATURE_BYTES_PER_PAGE
#define BTA_EXT_FEATURES_PAGE_MAX BTM_EXT_FEATURES_PAGE_MAX
/* ACL type
*/
#define BTA_DM_LINK_TYPE_BR_EDR 0x01
#define BTA_DM_LINK_TYPE_LE 0x02
#define BTA_DM_LINK_TYPE_ALL 0xFF
typedef UINT8 tBTA_DM_LINK_TYPE;
#define IMMEDIATE_DELY_MODE 0x00
#define ONFOUND_DELY_MODE 0x01
#define BATCH_DELY_MODE 0x02
#define ALLOW_ALL_FILTER 0x00
#define LOWEST_RSSI_VALUE 129
/*****************************************************************************
** External Function Declarations
*****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/*******************************************************************************
**
** Function BTA_EnableBluetooth
**
** Description This function initializes BTA and prepares BTA and the
** Bluetooth protocol stack for use. This function is
** typically called at startup or when Bluetooth services
** are required by the phone. This function must be called
** before calling any other API function.
**
**
** Returns BTA_SUCCESS if successful.
** BTA_FAIL if internal failure.
**
*******************************************************************************/
extern tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK *p_cback);
/*******************************************************************************
**
** Function BTA_DisableBluetooth
**
** Description This function disables BTA and the Bluetooth protocol
** stack. It is called when BTA is no longer being used
** by any application in the system.
**
**
** Returns void
**
*******************************************************************************/
extern tBTA_STATUS BTA_DisableBluetooth(void);
/*******************************************************************************
**
** Function BTA_EnableTestMode
**
** Description Enables bluetooth device under test mode
**
**
** Returns tBTA_STATUS
**
*******************************************************************************/
extern tBTA_STATUS BTA_EnableTestMode(void);
/*******************************************************************************
**
** Function BTA_DisableTestMode
**
** Description Disable bluetooth device under test mode
**
**
** Returns None
**
*******************************************************************************/
extern void BTA_DisableTestMode(void);
/*******************************************************************************
**
** Function BTA_DmSetDeviceName
**
** Description This function sets the Bluetooth name of the local device.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetDeviceName(char *p_name);
/*******************************************************************************
**
** Function BTA_DmSetVisibility
**
** Description This function sets the Bluetooth connectable,discoverable,
** pairable and conn paired only modesmodes of the local device.
** This controls whether other Bluetooth devices can find and connect to
** the local device.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode, UINT8 pairable_mode, UINT8 conn_filter);
/*******************************************************************************
**
** Function BTA_DmSearch
**
** Description This function searches for peer Bluetooth devices. It
** first performs an inquiry; for each device found from the
** inquiry it gets the remote name of the device. If
** parameter services is nonzero, service discovery will be
** performed on each device for the services specified.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK services,
tBTA_DM_SEARCH_CBACK *p_cback);
/*******************************************************************************
**
** Function BTA_DmSearchCancel
**
** Description This function cancels a search that has been initiated
** by calling BTA_DmSearch().
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSearchCancel(void);
/*******************************************************************************
**
** Function BTA_DmDiscover
**
** Description This function performs service discovery for the services
** of a particular peer device.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services,
tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search);
// btla-specific ++
/*******************************************************************************
**
** Function BTA_DmDiscoverUUID
**
** Description This function performs service discovery for the services
** of a particular peer device.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid,
tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search);
/*******************************************************************************
**
** Function BTA_DmGetCachedRemoteName
**
** Description Retieve cached remote name if available
**
** Returns BTA_SUCCESS if cached name was retrieved
** BTA_FAILURE if cached name is not available
**
*******************************************************************************/
tBTA_STATUS BTA_DmGetCachedRemoteName(BD_ADDR remote_device, UINT8 **pp_cached_name);
// btla-specific --
/*******************************************************************************
**
** Function BTA_DmBond
**
** Description This function initiates a bonding procedure with a peer
** device. The bonding procedure enables authentication
** and optionally encryption on the Bluetooth link.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBond(BD_ADDR bd_addr);
/*******************************************************************************
**
** Function BTA_DmBondByTransport
**
** Description This function initiates a bonding procedure with a peer
** device by designated transport. The bonding procedure enables
** authentication and optionally encryption on the Bluetooth link.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBondByTransport(BD_ADDR bd_addr, tBTA_TRANSPORT transport);
/*******************************************************************************
**
** Function BTA_DmBondCancel
**
** Description This function cancels a bonding procedure with a peer
** device.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBondCancel(BD_ADDR bd_addr);
/*******************************************************************************
**
** Function BTA_DmPinReply
**
** Description This function provides a PIN when one is requested by DM
** during a bonding procedure. The application should call
** this function after the security callback is called with
** a BTA_DM_PIN_REQ_EVT.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmPinReply(BD_ADDR bd_addr, BOOLEAN accept, UINT8 pin_len,
UINT8 *p_pin);
#if (BTM_OOB_INCLUDED == TRUE)
/*******************************************************************************
**
** Function BTA_DmLocalOob
**
** Description This function retrieves the OOB data from local controller.
** The result is reported by bta_dm_co_loc_oob().
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmLocalOob(void);
#endif /* BTM_OOB_INCLUDED */
/*******************************************************************************
**
** Function BTA_DmConfirm
**
** Description This function accepts or rejects the numerical value of the
** Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmConfirm(BD_ADDR bd_addr, BOOLEAN accept);
/*******************************************************************************
**
** Function BTA_DmAddDevice
**
** Description This function adds a device to the security database list
** of peer devices. This function would typically be called
** at system startup to initialize the security database with
** known peer devices. This is a direct execution function
** that may lock task scheduling on some platforms.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class,
LINK_KEY link_key, tBTA_SERVICE_MASK trusted_mask,
BOOLEAN is_trusted, UINT8 key_type,
tBTA_IO_CAP io_cap, UINT8 pin_length);
/*******************************************************************************
**
** Function BTA_DmRemoveDevice
**
** Description This function removes a device from the security database.
** This is a direct execution function that may lock task
** scheduling on some platforms.
**
**
** Returns BTA_SUCCESS if successful.
** BTA_FAIL if operation failed.
**
*******************************************************************************/
extern tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr);
/*******************************************************************************
**
** Function BTA_GetEirService
**
** Description This function is called to get BTA service mask from EIR.
**
** Parameters p_eir - pointer of EIR significant part
** p_services - return the BTA service mask
**
** Returns None
**
*******************************************************************************/
extern void BTA_GetEirService( UINT8 *p_eir, tBTA_SERVICE_MASK *p_services );
/*******************************************************************************
**
** Function BTA_DmGetConnectionState
**
** Description Returns whether the remote device is currently connected.
**
** Returns 0 if the device is NOT connected.
**
*******************************************************************************/
extern UINT16 BTA_DmGetConnectionState( BD_ADDR bd_addr );
/*******************************************************************************
**
** Function BTA_DmSetLocalDiRecord
**
** Description This function adds a DI record to the local SDP database.
**
** Returns BTA_SUCCESS if record set sucessfully, otherwise error code.
**
*******************************************************************************/
extern tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info,
UINT32 *p_handle );
/*******************************************************************************
**
**
** Function BTA_DmCloseACL
**
** Description This function force to close an ACL connection and remove the
** device from the security database list of known devices.
**
** Parameters: bd_addr - Address of the peer device
** remove_dev - remove device or not after link down
** transport - which transport to close
**
** Returns void.
**
*******************************************************************************/
extern void BTA_DmCloseACL(BD_ADDR bd_addr, BOOLEAN remove_dev, tBTA_TRANSPORT transport);
/*******************************************************************************
**
** Function bta_dmexecutecallback
**
** Description This function will request BTA to execute a call back in the context of BTU task
** This API was named in lower case because it is only intended
** for the internal customers(like BTIF).
**
** Returns void
**
*******************************************************************************/
extern void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK* p_callback, void * p_param);
#if (BTM_SCO_HCI_INCLUDED == TRUE)
/*******************************************************************************
**
** Function BTA_DmPcmInitSamples
**
** Description initialize the down sample converter.
**
** src_sps: original samples per second (source audio data)
** (ex. 44100, 48000)
** bits: number of bits per pcm sample (16)
** n_channels: number of channels (i.e. mono(1), stereo(2)...)
**
** Returns none
**
*******************************************************************************/
extern void BTA_DmPcmInitSamples (UINT32 src_sps, UINT32 bits, UINT32 n_channels);
/**************************************************************************************
** Function BTA_DmPcmResample
**
** Description Down sampling utility to convert higher sampling rate into 8K/16bits
** PCM samples.
**
** Parameters p_src: pointer to the buffer where the original sampling PCM
** are stored.
** in_bytes: Length of the input PCM sample buffer in byte.
** p_dst: pointer to the buffer which is to be used to store
** the converted PCM samples.
**
**
** Returns INT32: number of samples converted.
**
**************************************************************************************/
extern INT32 BTA_DmPcmResample (void *p_src, UINT32 in_bytes, void *p_dst);
#endif
#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
/* BLE related API functions */
/*******************************************************************************
**
** Function BTA_DmBleSecurityGrant
**
** Description Grant security request access.
**
** Parameters: bd_addr - BD address of the peer
** res - security grant status.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRANT res);
/*******************************************************************************
**
** Function BTA_DmBleSetBgConnType
**
** Description This function is called to set BLE connectable mode for a
** peripheral device.
**
** Parameters bg_conn_type: it can be auto connection, or selective connection.
** p_select_cback: callback function when selective connection procedure
** is being used.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, tBTA_DM_BLE_SEL_CBACK *p_select_cback);
/*******************************************************************************
**
** Function BTA_DmBlePasskeyReply
**
** Description Send BLE SMP passkey reply.
**
** Parameters: bd_addr - BD address of the peer
** accept - passkey entry sucessful or declined.
** passkey - passkey value, must be a 6 digit number,
** can be lead by 0.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, BOOLEAN accept, UINT32 passkey);
/*******************************************************************************
**
** Function BTA_DmBleConfirmReply
**
** Description Send BLE SMP SC user confirmation reply.
**
** Parameters: bd_addr - BD address of the peer
** accept - numbers to compare are the same or different.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleConfirmReply(BD_ADDR bd_addr, BOOLEAN accept);
/*******************************************************************************
**
** Function BTA_DmAddBleDevice
**
** Description Add a BLE device. This function will be normally called
** during host startup to restore all required information
** for a LE device stored in the NVRAM.
**
** Parameters: bd_addr - BD address of the peer
** dev_type - Remote device's device type.
** addr_type - LE device address type.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type,
tBT_DEVICE_TYPE dev_type);
/*******************************************************************************
**
** Function BTA_DmAddBleKey
**
** Description Add/modify LE device information. This function will be
** normally called during host startup to restore all required
** information stored in the NVRAM.
**
** Parameters: bd_addr - BD address of the peer
** p_le_key - LE key values.
** key_type - LE SMP key type.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmAddBleKey (BD_ADDR bd_addr,
tBTA_LE_KEY_VALUE *p_le_key,
tBTA_LE_KEY_TYPE key_type);
/*******************************************************************************
**
** Function BTA_DmSetBlePrefConnParams
**
** Description This function is called to set the preferred connection
** parameters when default connection parameter is not desired.
**
** Parameters: bd_addr - BD address of the peripheral
** min_conn_int - minimum preferred connection interval
** max_conn_int - maximum preferred connection interval
** slave_latency - preferred slave latency
** supervision_tout - preferred supervision timeout
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr,
UINT16 min_conn_int, UINT16 max_conn_int,
UINT16 slave_latency, UINT16 supervision_tout );
/*******************************************************************************
**
** Function BTA_DmSetBleConnScanParams
**
** Description This function is called to set scan parameters used in
** BLE connection request
**
** Parameters: scan_interval - scan interval
** scan_window - scan window
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetBleConnScanParams(UINT32 scan_interval,
UINT32 scan_window);
/*******************************************************************************
**
** Function BTA_DmSetBleScanParams
**
** Description This function is called to set scan parameters
**
** Parameters: client_if - Client IF
** scan_interval - scan interval
** scan_window - scan window
** scan_mode - scan mode
** scan_param_setup_status_cback - Set scan param status callback
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetBleScanParams(tGATT_IF client_if, UINT32 scan_interval,
UINT32 scan_window, tBLE_SCAN_MODE scan_mode,
tBLE_SCAN_PARAM_SETUP_CBACK scan_param_setup_status_cback);
/*******************************************************************************
**
** Function BTA_DmSetBleScanFilterParams
**
** Description This function is called to set scan parameters
**
** Parameters: client_if - Client IF
** scan_interval - scan interval
** scan_window - scan window
** scan_mode - scan mode
** scan_param_setup_status_cback - Set scan param status callback
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetBleScanFilterParams(tGATT_IF client_if, UINT32 scan_interval,
UINT32 scan_window, tBLE_SCAN_MODE scan_mode, UINT8 scan_fil_poilcy,
UINT8 addr_type_own, tBLE_SCAN_PARAM_SETUP_CBACK scan_param_setup_cback);
/*******************************************************************************
**
** Function BTA_DmSetBleAdvParams
**
** Description This function sets the advertising parameters BLE functionality.
** It is to be called when device act in peripheral or broadcaster
** role.
**
** Parameters: adv_int_min - adv interval minimum
** adv_int_max - adv interval max
** p_dir_bda - directed adv initator address
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetBleAdvParams (UINT16 adv_int_min, UINT16 adv_int_max,
tBLE_BD_ADDR *p_dir_bda);
extern void BTA_DmSetBleAdvParamsAll (UINT16 adv_int_min, UINT16 adv_int_max,
UINT8 adv_type, tBLE_ADDR_TYPE addr_type_own,
tBTM_BLE_ADV_CHNL_MAP chnl_map, tBTM_BLE_AFP adv_fil_pol,
tBLE_BD_ADDR *p_dir_bda);
/*******************************************************************************
**
** Function BTA_DmSearchExt
**
** Description This function searches for peer Bluetooth devices. It performs
** an inquiry and gets the remote name for devices. Service
** discovery is done if services is non zero
**
** Parameters p_dm_inq: inquiry conditions
** services: if service is not empty, service discovery will be done.
** for all GATT based service condition, put num_uuid, and
** p_uuid is the pointer to the list of UUID values.
** p_cback: callback functino when search is completed.
**
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services,
tBTA_DM_SEARCH_CBACK *p_cback);
/*******************************************************************************
**
** Function BTA_DmDiscoverExt
**
** Description This function does service discovery for services of a
** peer device. When services.num_uuid is 0, it indicates all
** GATT based services are to be searched; other wise a list of
** UUID of interested services should be provided through
** services.p_uuid.
**
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services,
tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search);
/*******************************************************************************
**
** Function BTA_DmDiscoverByTransport
**
** Description This function does service discovery on particular transport
** for services of a
** peer device. When services.num_uuid is 0, it indicates all
** GATT based services are to be searched; other wise a list of
** UUID of interested services should be provided through
** p_services->p_uuid.
**
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmDiscoverByTransport(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services,
tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search,
tBTA_TRANSPORT transport);
/*******************************************************************************
**
** Function BTA_DmSetEncryption
**
** Description This function is called to ensure that connection is
** encrypted. Should be called only on an open connection.
** Typically only needed for connections that first want to
** bring up unencrypted links, then later encrypt them.
**
** Parameters: bd_addr - Address of the peer device
** transport - transport of the link to be encruypted
** p_callback - Pointer to callback function to indicat the
** link encryption status
** sec_act - This is the security action to indicate
** what knid of BLE security level is required for
** the BLE link if the BLE is supported
** Note: This parameter is ignored for the BR/EDR link
** or the BLE is not supported
**
** Returns void
**
**
*******************************************************************************/
extern void BTA_DmSetEncryption(BD_ADDR bd_addr, tBTA_TRANSPORT transport,
tBTA_DM_ENCRYPT_CBACK *p_callback,
tBTA_DM_BLE_SEC_ACT sec_act);
/*******************************************************************************
**
** Function BTA_DmBleObserve
**
** Description This procedure keep the device listening for advertising
** events from a broadcast device.
**
** Parameters start: start or stop observe.
** duration : Duration of the scan. Continuous scan if 0 is passed
** p_results_cb: Callback to be called with scan results
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleObserve(BOOLEAN start, UINT8 duration,
tBTA_DM_SEARCH_CBACK *p_results_cb);
extern void BTA_DmBleStopAdvertising(void);
extern void BTA_DmSetRandAddress(BD_ADDR rand_addr);
#endif
#if BLE_INCLUDED == TRUE
// btla-specific --
/*******************************************************************************
**
** Function BTA_DmBleConfigLocalPrivacy
**
** Description Enable/disable privacy on the local device
**
** Parameters: privacy_enable - enable/disabe privacy on remote device.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleConfigLocalPrivacy(BOOLEAN privacy_enable);
/*******************************************************************************
**
** Function BTA_DmBleEnableRemotePrivacy
**
** Description Enable/disable privacy on a remote device
**
** Parameters: bd_addr - BD address of the peer
** privacy_enable - enable/disabe privacy on remote device.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleEnableRemotePrivacy(BD_ADDR bd_addr, BOOLEAN privacy_enable);
/*******************************************************************************
**
** Function BTA_DmBleSetAdvConfig
**
** Description This function is called to override the BTA default ADV parameters.
**
** Parameters Pointer to User defined ADV data structure
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleSetAdvConfig (tBTA_BLE_AD_MASK data_mask,
tBTA_BLE_ADV_DATA *p_adv_cfg,
tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback);
/*******************************************************************************
**
** Function BTA_DmBleSetScanRsp
**
** Description This function is called to override the BTA scan response.
**
** Parameters Pointer to User defined ADV data structure
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleSetScanRsp (tBTA_BLE_AD_MASK data_mask,
tBTA_BLE_ADV_DATA *p_adv_cfg,
tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback);
/*******************************************************************************
**
** Function BTA_DmBleBroadcast
**
** Description This function starts or stops LE broadcasting.
**
** Parameters start: start or stop broadcast.
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleBroadcast (BOOLEAN start);
/*******************************************************************************
**
** Function BTA_BleEnableAdvInstance
**
** Description This function enables the Multi ADV instance feature
**
** Parameters p_params Pointer to ADV param user defined structure
** p_cback Pointer to Multi ADV callback structure
** p_ref - Reference pointer
**
** Returns None
**
*******************************************************************************/
extern void BTA_BleEnableAdvInstance (tBTA_BLE_ADV_PARAMS *p_params,
tBTA_BLE_MULTI_ADV_CBACK *p_cback,void *p_ref);
/*******************************************************************************
**
** Function BTA_BleUpdateAdvInstParam
**
** Description This function updates the Multi ADV instance params
**
** Parameters inst_id Instance ID
** p_params Pointer to ADV param user defined structure
**
** Returns None
**
*******************************************************************************/
extern void BTA_BleUpdateAdvInstParam (UINT8 inst_id,
tBTA_BLE_ADV_PARAMS *p_params);
/*******************************************************************************
**
** Function BTA_BleCfgAdvInstData
**
** Description This function is called to configure the ADV instance data
**
** Parameters inst_id - Instance ID
** is_scan_rsp - Boolean value Scan response
** Pointer to User defined ADV data structure
** Returns None
**
*******************************************************************************/
extern void BTA_BleCfgAdvInstData (UINT8 inst_id, BOOLEAN is_scan_rsp,
tBTA_BLE_AD_MASK data_mask, tBTA_BLE_ADV_DATA *p_data);
/*******************************************************************************
**
** Function BTA_BleDisableAdvInstance
**
** Description This function is called to disable the ADV instance
**
** Parameters inst_id - Instance ID to be disabled
**
** Returns None
**
*******************************************************************************/
extern void BTA_BleDisableAdvInstance(UINT8 inst_id);
/*******************************************************************************
**
** Function BTA_DmBleUpdateConnectionParams
**
** Description Update connection parameters, can only be used when connection is up.
**
** Parameters: bd_addr - BD address of the peer
** min_int - minimum connection interval, [0x0004~ 0x4000]
** max_int - maximum connection interval, [0x0004~ 0x4000]
** latency - slave latency [0 ~ 500]
** timeout - supervision timeout [0x000a ~ 0xc80]
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleUpdateConnectionParams(BD_ADDR bd_addr, UINT16 min_int,
UINT16 max_int, UINT16 latency, UINT16 timeout);
/*******************************************************************************
**
** Function BTA_DmBleSetDataLength
**
** Description This function is to set maximum LE data packet size
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleSetDataLength(BD_ADDR remote_device, UINT16 tx_data_length);
/*******************************************************************************
**
** Function BTA_DmBleSetStorageParams
**
** Description This function is called to set the storage parameters
**
** Parameters batch_scan_full_max -Max storage space (in %) allocated to full scanning
** batch_scan_trunc_max -Max storage space (in %) allocated to truncated scanning
** batch_scan_notify_threshold - Setup notification level based on total space
** consumed by both pools. Setting it to 0 will disable threshold notification
** p_setup_cback - Setup callback
** p_thres_cback - Threshold callback
** p_rep_cback - Reports callback
** ref_value - Reference value
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleSetStorageParams(UINT8 batch_scan_full_max,
UINT8 batch_scan_trunc_max,
UINT8 batch_scan_notify_threshold,
tBTA_BLE_SCAN_SETUP_CBACK *p_setup_cback,
tBTA_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback,
tBTA_BLE_SCAN_REP_CBACK* p_rep_cback,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleEnableBatchScan
**
** Description This function is called to enable the batch scan
**
** Parameters scan_mode -Batch scan mode
** scan_interval - Scan interval
** scan_window - Scan window
** discard_rule -Discard rules
** addr_type - Address type
** ref_value - Reference value
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleEnableBatchScan(tBTA_BLE_BATCH_SCAN_MODE scan_mode,
UINT32 scan_interval, UINT32 scan_window,
tBTA_BLE_DISCARD_RULE discard_rule,
tBLE_ADDR_TYPE addr_type,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleReadScanReports
**
** Description This function is called to read the batch scan reports
**
** Parameters scan_mode -Batch scan mode
** ref_value - Reference value
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleReadScanReports(tBTA_BLE_BATCH_SCAN_MODE scan_type,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleDisableBatchScan
**
** Description This function is called to disable the batch scanning
**
** Parameters ref_value - Reference value
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleDisableBatchScan(tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmEnableScanFilter
**
** Description This function is called to enable the adv data payload filter
**
** Parameters action - enable or disable the APCF feature
** p_cmpl_cback - Command completed callback
** ref_value - Reference value
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmEnableScanFilter(UINT8 action,
tBTA_DM_BLE_PF_STATUS_CBACK *p_cmpl_cback,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleScanFilterSetup
**
** Description This function is called to setup the filter params
**
** Parameters p_target: enable the filter condition on a target device; if NULL
** filt_index - Filter index
** p_filt_params -Filter parameters
** ref_value - Reference value
** action - Add, delete or clear
** p_cmpl_back - Command completed callback
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleScanFilterSetup(UINT8 action,
tBTA_DM_BLE_PF_FILT_INDEX filt_index,
tBTA_DM_BLE_PF_FILT_PARAMS *p_filt_params,
tBLE_BD_ADDR *p_target,
tBTA_DM_BLE_PF_PARAM_CBACK *p_cmpl_cback,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleCfgFilterCondition
**
** Description This function is called to configure the adv data payload filter
** condition.
**
** Parameters action: to read/write/clear
** cond_type: filter condition type
** filt_index - Filter index
** p_cond: filter condition parameter
** p_cmpl_back - Command completed callback
** ref_value - Reference value
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleCfgFilterCondition(tBTA_DM_BLE_SCAN_COND_OP action,
tBTA_DM_BLE_PF_COND_TYPE cond_type,
tBTA_DM_BLE_PF_FILT_INDEX filt_index,
tBTA_DM_BLE_PF_COND_PARAM *p_cond,
tBTA_DM_BLE_PF_CFG_CBACK *p_cmpl_cback,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleTrackAdvertiser
**
** Description This function is called to track the advertiser
**
** Parameters ref_value - Reference value
** p_track_adv_cback - ADV callback
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleTrackAdvertiser(tBTA_DM_BLE_REF_VALUE ref_value,
tBTA_BLE_TRACK_ADV_CBACK *p_track_adv_cback);
/*******************************************************************************
**
** Function BTA_DmBleGetEnergyInfo
**
** Description This function is called to obtain the energy info
**
** Parameters p_cmpl_cback - Command complete callback
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleGetEnergyInfo(tBTA_BLE_ENERGY_INFO_CBACK *p_cmpl_cback);
/*******************************************************************************
**
** Function BTA_BrcmInit
**
** Description This function initializes Broadcom specific VS handler in BTA
**
** Returns void
**
*******************************************************************************/
extern void BTA_VendorInit (void);
/*******************************************************************************
**
** Function BTA_BrcmCleanup
**
** Description This function frees up Broadcom specific VS specific dynamic memory
**
** Returns void
**
*******************************************************************************/
extern void BTA_VendorCleanup (void);
#endif
#ifdef __cplusplus
}
#endif
#endif /* BTA_API_H */
Reference in a new issue View git blame Copy permalink