814 lines
28 KiB
C
814 lines
28 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright (C) 1999-2012 Broadcom Corporation
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at:
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
******************************************************************************/
|
|
|
|
#ifndef HCIMSGS_H
|
|
#define HCIMSGS_H
|
|
|
|
#include "common/bt_target.h"
|
|
#include "stack/hcidefs.h"
|
|
#include "stack/bt_types.h"
|
|
|
|
void bte_main_hci_send(BT_HDR *p_msg, UINT16 event);
|
|
void bte_main_lpm_allow_bt_device_sleep(void);
|
|
|
|
/* Message by message.... */
|
|
|
|
BOOLEAN btsnd_hcic_inquiry(const LAP inq_lap, UINT8 duration,
|
|
UINT8 response_cnt);
|
|
|
|
#define HCIC_PARAM_SIZE_INQUIRY 5
|
|
|
|
|
|
#define HCIC_INQ_INQ_LAP_OFF 0
|
|
#define HCIC_INQ_DUR_OFF 3
|
|
#define HCIC_INQ_RSP_CNT_OFF 4
|
|
/* Inquiry */
|
|
|
|
/* Inquiry Cancel */
|
|
BOOLEAN btsnd_hcic_inq_cancel(void);
|
|
|
|
#define HCIC_PARAM_SIZE_INQ_CANCEL 0
|
|
|
|
/* Periodic Inquiry Mode */
|
|
BOOLEAN btsnd_hcic_per_inq_mode(UINT16 max_period, UINT16 min_period,
|
|
const LAP inq_lap, UINT8 duration,
|
|
UINT8 response_cnt);
|
|
|
|
#define HCIC_PARAM_SIZE_PER_INQ_MODE 9
|
|
|
|
#define HCI_PER_INQ_MAX_INTRVL_OFF 0
|
|
#define HCI_PER_INQ_MIN_INTRVL_OFF 2
|
|
#define HCI_PER_INQ_INQ_LAP_OFF 4
|
|
#define HCI_PER_INQ_DURATION_OFF 7
|
|
#define HCI_PER_INQ_RSP_CNT_OFF 8
|
|
/* Periodic Inquiry Mode */
|
|
|
|
/* Exit Periodic Inquiry Mode */
|
|
BOOLEAN btsnd_hcic_exit_per_inq(void);
|
|
|
|
#define HCIC_PARAM_SIZE_EXIT_PER_INQ 0
|
|
/* Create Connection */
|
|
BOOLEAN btsnd_hcic_create_conn(BD_ADDR dest, UINT16 packet_types,
|
|
UINT8 page_scan_rep_mode,
|
|
UINT8 page_scan_mode,
|
|
UINT16 clock_offset,
|
|
UINT8 allow_switch);
|
|
|
|
#define HCIC_PARAM_SIZE_CREATE_CONN 13
|
|
|
|
#define HCIC_CR_CONN_BD_ADDR_OFF 0
|
|
#define HCIC_CR_CONN_PKT_TYPES_OFF 6
|
|
#define HCIC_CR_CONN_REP_MODE_OFF 8
|
|
#define HCIC_CR_CONN_PAGE_SCAN_MODE_OFF 9
|
|
#define HCIC_CR_CONN_CLK_OFF_OFF 10
|
|
#define HCIC_CR_CONN_ALLOW_SWITCH_OFF 12
|
|
/* Create Connection */
|
|
|
|
/* Disconnect */
|
|
BOOLEAN btsnd_hcic_disconnect(UINT16 handle, UINT8 reason);
|
|
|
|
#define HCIC_PARAM_SIZE_DISCONNECT 3
|
|
|
|
#define HCI_DISC_HANDLE_OFF 0
|
|
#define HCI_DISC_REASON_OFF 2
|
|
/* Disconnect */
|
|
|
|
#if BTM_SCO_INCLUDED == TRUE
|
|
/* Add SCO Connection */
|
|
BOOLEAN btsnd_hcic_add_SCO_conn (UINT16 handle, UINT16 packet_types);
|
|
#endif /* BTM_SCO_INCLUDED */
|
|
|
|
#define HCIC_PARAM_SIZE_ADD_SCO_CONN 4
|
|
|
|
#define HCI_ADD_SCO_HANDLE_OFF 0
|
|
#define HCI_ADD_SCO_PACKET_TYPES_OFF 2
|
|
/* Add SCO Connection */
|
|
|
|
/* Create Connection Cancel */
|
|
BOOLEAN btsnd_hcic_create_conn_cancel(BD_ADDR dest);
|
|
|
|
#define HCIC_PARAM_SIZE_CREATE_CONN_CANCEL 6
|
|
|
|
#define HCIC_CR_CONN_CANCEL_BD_ADDR_OFF 0
|
|
/* Create Connection Cancel */
|
|
|
|
/* Accept Connection Request */
|
|
BOOLEAN btsnd_hcic_accept_conn (BD_ADDR bd_addr, UINT8 role);
|
|
|
|
#define HCIC_PARAM_SIZE_ACCEPT_CONN 7
|
|
|
|
#define HCI_ACC_CONN_BD_ADDR_OFF 0
|
|
#define HCI_ACC_CONN_ROLE_OFF 6
|
|
/* Accept Connection Request */
|
|
|
|
/* Reject Connection Request */
|
|
BOOLEAN btsnd_hcic_reject_conn (BD_ADDR bd_addr, UINT8 reason);
|
|
|
|
#define HCIC_PARAM_SIZE_REJECT_CONN 7
|
|
|
|
#define HCI_REJ_CONN_BD_ADDR_OFF 0
|
|
#define HCI_REJ_CONN_REASON_OFF 6
|
|
/* Reject Connection Request */
|
|
|
|
/* Link Key Request Reply */
|
|
BOOLEAN btsnd_hcic_link_key_req_reply (BD_ADDR bd_addr,
|
|
LINK_KEY link_key);
|
|
|
|
#define HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY 22
|
|
|
|
#define HCI_LINK_KEY_REPLY_BD_ADDR_OFF 0
|
|
#define HCI_LINK_KEY_REPLY_LINK_KEY_OFF 6
|
|
/* Link Key Request Reply */
|
|
|
|
/* Link Key Request Neg Reply */
|
|
BOOLEAN btsnd_hcic_link_key_neg_reply (BD_ADDR bd_addr);
|
|
|
|
#define HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY 6
|
|
|
|
#define HCI_LINK_KEY_NEG_REP_BD_ADR_OFF 0
|
|
/* Link Key Request Neg Reply */
|
|
|
|
/* PIN Code Request Reply */
|
|
BOOLEAN btsnd_hcic_pin_code_req_reply (BD_ADDR bd_addr,
|
|
UINT8 pin_code_len,
|
|
PIN_CODE pin_code);
|
|
|
|
#define HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY 23
|
|
|
|
#define HCI_PIN_CODE_REPLY_BD_ADDR_OFF 0
|
|
#define HCI_PIN_CODE_REPLY_PIN_LEN_OFF 6
|
|
#define HCI_PIN_CODE_REPLY_PIN_CODE_OFF 7
|
|
/* PIN Code Request Reply */
|
|
|
|
/* Link Key Request Neg Reply */
|
|
BOOLEAN btsnd_hcic_pin_code_neg_reply (BD_ADDR bd_addr);
|
|
|
|
#define HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY 6
|
|
|
|
#define HCI_PIN_CODE_NEG_REP_BD_ADR_OFF 0
|
|
/* Link Key Request Neg Reply */
|
|
|
|
/* Change Connection Type */
|
|
BOOLEAN btsnd_hcic_change_conn_type (UINT16 handle, UINT16 packet_types);
|
|
|
|
#define HCIC_PARAM_SIZE_CHANGE_CONN_TYPE 4
|
|
|
|
#define HCI_CHNG_PKT_TYPE_HANDLE_OFF 0
|
|
#define HCI_CHNG_PKT_TYPE_PKT_TYPE_OFF 2
|
|
/* Change Connection Type */
|
|
|
|
#define HCIC_PARAM_SIZE_CMD_HANDLE 2
|
|
|
|
#define HCI_CMD_HANDLE_HANDLE_OFF 0
|
|
|
|
BOOLEAN btsnd_hcic_auth_request (UINT16 handle); /* Authentication Request */
|
|
|
|
/* Set Connection Encryption */
|
|
BOOLEAN btsnd_hcic_set_conn_encrypt (UINT16 handle, BOOLEAN enable);
|
|
#define HCIC_PARAM_SIZE_SET_CONN_ENCRYPT 3
|
|
|
|
|
|
#define HCI_SET_ENCRYPT_HANDLE_OFF 0
|
|
#define HCI_SET_ENCRYPT_ENABLE_OFF 2
|
|
/* Set Connection Encryption */
|
|
|
|
/* Remote Name Request */
|
|
BOOLEAN btsnd_hcic_rmt_name_req (BD_ADDR bd_addr,
|
|
UINT8 page_scan_rep_mode,
|
|
UINT8 page_scan_mode,
|
|
UINT16 clock_offset);
|
|
|
|
#define HCIC_PARAM_SIZE_RMT_NAME_REQ 10
|
|
|
|
#define HCI_RMT_NAME_BD_ADDR_OFF 0
|
|
#define HCI_RMT_NAME_REP_MODE_OFF 6
|
|
#define HCI_RMT_NAME_PAGE_SCAN_MODE_OFF 7
|
|
#define HCI_RMT_NAME_CLK_OFF_OFF 8
|
|
/* Remote Name Request */
|
|
|
|
/* Remote Name Request Cancel */
|
|
BOOLEAN btsnd_hcic_rmt_name_req_cancel(BD_ADDR bd_addr);
|
|
|
|
#define HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL 6
|
|
|
|
#define HCI_RMT_NAME_CANCEL_BD_ADDR_OFF 0
|
|
/* Remote Name Request Cancel */
|
|
|
|
BOOLEAN btsnd_hcic_rmt_features_req(UINT16 handle); /* Remote Features Request */
|
|
|
|
/* Remote Extended Features */
|
|
BOOLEAN btsnd_hcic_rmt_ext_features(UINT16 handle, UINT8 page_num);
|
|
|
|
#define HCIC_PARAM_SIZE_RMT_EXT_FEATURES 3
|
|
|
|
#define HCI_RMT_EXT_FEATURES_HANDLE_OFF 0
|
|
#define HCI_RMT_EXT_FEATURES_PAGE_NUM_OFF 2
|
|
/* Remote Extended Features */
|
|
|
|
|
|
BOOLEAN btsnd_hcic_rmt_ver_req(UINT16 handle); /* Remote Version Info Request */
|
|
BOOLEAN btsnd_hcic_read_rmt_clk_offset(UINT16 handle); /* Remote Clock Offset */
|
|
BOOLEAN btsnd_hcic_read_lmp_handle(UINT16 handle); /* Remote LMP Handle */
|
|
|
|
BOOLEAN btsnd_hcic_setup_esco_conn (UINT16 handle,
|
|
UINT32 tx_bw, UINT32 rx_bw,
|
|
UINT16 max_latency, UINT16 voice,
|
|
UINT8 retrans_effort,
|
|
UINT16 packet_types);
|
|
#define HCIC_PARAM_SIZE_SETUP_ESCO 17
|
|
|
|
#define HCI_SETUP_ESCO_HANDLE_OFF 0
|
|
#define HCI_SETUP_ESCO_TX_BW_OFF 2
|
|
#define HCI_SETUP_ESCO_RX_BW_OFF 6
|
|
#define HCI_SETUP_ESCO_MAX_LAT_OFF 10
|
|
#define HCI_SETUP_ESCO_VOICE_OFF 12
|
|
#define HCI_SETUP_ESCO_RETRAN_EFF_OFF 14
|
|
#define HCI_SETUP_ESCO_PKT_TYPES_OFF 15
|
|
|
|
|
|
BOOLEAN btsnd_hcic_accept_esco_conn (BD_ADDR bd_addr,
|
|
UINT32 tx_bw, UINT32 rx_bw,
|
|
UINT16 max_latency,
|
|
UINT16 content_fmt,
|
|
UINT8 retrans_effort,
|
|
UINT16 packet_types);
|
|
#define HCIC_PARAM_SIZE_ACCEPT_ESCO 21
|
|
|
|
#define HCI_ACCEPT_ESCO_BDADDR_OFF 0
|
|
#define HCI_ACCEPT_ESCO_TX_BW_OFF 6
|
|
#define HCI_ACCEPT_ESCO_RX_BW_OFF 10
|
|
#define HCI_ACCEPT_ESCO_MAX_LAT_OFF 14
|
|
#define HCI_ACCEPT_ESCO_VOICE_OFF 16
|
|
#define HCI_ACCEPT_ESCO_RETRAN_EFF_OFF 18
|
|
#define HCI_ACCEPT_ESCO_PKT_TYPES_OFF 19
|
|
|
|
|
|
BOOLEAN btsnd_hcic_reject_esco_conn (BD_ADDR bd_addr, UINT8 reason);
|
|
#define HCIC_PARAM_SIZE_REJECT_ESCO 7
|
|
|
|
#define HCI_REJECT_ESCO_BDADDR_OFF 0
|
|
#define HCI_REJECT_ESCO_REASON_OFF 6
|
|
|
|
/* Hold Mode */
|
|
BOOLEAN btsnd_hcic_hold_mode(UINT16 handle, UINT16 max_hold_period,
|
|
UINT16 min_hold_period);
|
|
|
|
#define HCIC_PARAM_SIZE_HOLD_MODE 6
|
|
|
|
#define HCI_HOLD_MODE_HANDLE_OFF 0
|
|
#define HCI_HOLD_MODE_MAX_PER_OFF 2
|
|
#define HCI_HOLD_MODE_MIN_PER_OFF 4
|
|
/* Hold Mode */
|
|
|
|
/**
|
|
* Sniff Mode
|
|
* sniff_attempt should no more than 0xFF
|
|
*/
|
|
BOOLEAN btsnd_hcic_sniff_mode(UINT16 handle,
|
|
UINT16 max_sniff_period,
|
|
UINT16 min_sniff_period,
|
|
UINT16 sniff_attempt,
|
|
UINT16 sniff_timeout);
|
|
|
|
#define HCIC_PARAM_SIZE_SNIFF_MODE 10
|
|
|
|
|
|
#define HCI_SNIFF_MODE_HANDLE_OFF 0
|
|
#define HCI_SNIFF_MODE_MAX_PER_OFF 2
|
|
#define HCI_SNIFF_MODE_MIN_PER_OFF 4
|
|
#define HCI_SNIFF_MODE_ATTEMPT_OFF 6
|
|
#define HCI_SNIFF_MODE_TIMEOUT_OFF 8
|
|
/* Sniff Mode */
|
|
|
|
BOOLEAN btsnd_hcic_exit_sniff_mode(UINT16 handle); /* Exit Sniff Mode */
|
|
|
|
/* Park Mode */
|
|
BOOLEAN btsnd_hcic_park_mode (UINT16 handle,
|
|
UINT16 beacon_max_interval,
|
|
UINT16 beacon_min_interval);
|
|
|
|
#define HCIC_PARAM_SIZE_PARK_MODE 6
|
|
|
|
#define HCI_PARK_MODE_HANDLE_OFF 0
|
|
#define HCI_PARK_MODE_MAX_PER_OFF 2
|
|
#define HCI_PARK_MODE_MIN_PER_OFF 4
|
|
/* Park Mode */
|
|
|
|
BOOLEAN btsnd_hcic_exit_park_mode(UINT16 handle); /* Exit Park Mode */
|
|
|
|
/* QoS Setup */
|
|
BOOLEAN btsnd_hcic_qos_setup (UINT16 handle, UINT8 flags,
|
|
UINT8 service_type,
|
|
UINT32 token_rate, UINT32 peak,
|
|
UINT32 latency, UINT32 delay_var);
|
|
|
|
#define HCIC_PARAM_SIZE_QOS_SETUP 20
|
|
|
|
#define HCI_QOS_HANDLE_OFF 0
|
|
#define HCI_QOS_FLAGS_OFF 2
|
|
#define HCI_QOS_SERVICE_TYPE_OFF 3
|
|
#define HCI_QOS_TOKEN_RATE_OFF 4
|
|
#define HCI_QOS_PEAK_BANDWIDTH_OFF 8
|
|
#define HCI_QOS_LATENCY_OFF 12
|
|
#define HCI_QOS_DELAY_VAR_OFF 16
|
|
/* QoS Setup */
|
|
|
|
/* Switch Role Request */
|
|
BOOLEAN btsnd_hcic_switch_role (BD_ADDR bd_addr, UINT8 role);
|
|
|
|
#define HCIC_PARAM_SIZE_SWITCH_ROLE 7
|
|
|
|
#define HCI_SWITCH_BD_ADDR_OFF 0
|
|
#define HCI_SWITCH_ROLE_OFF 6
|
|
/* Switch Role Request */
|
|
|
|
/* Write Policy Settings */
|
|
BOOLEAN btsnd_hcic_write_policy_set(UINT16 handle, UINT16 settings);
|
|
|
|
#define HCIC_PARAM_SIZE_WRITE_POLICY_SET 4
|
|
|
|
#define HCI_WRITE_POLICY_HANDLE_OFF 0
|
|
#define HCI_WRITE_POLICY_SETTINGS_OFF 2
|
|
/* Write Policy Settings */
|
|
|
|
/* Write Default Policy Settings */
|
|
BOOLEAN btsnd_hcic_write_def_policy_set(UINT16 settings);
|
|
|
|
#define HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET 2
|
|
|
|
#define HCI_WRITE_DEF_POLICY_SETTINGS_OFF 0
|
|
/* Write Default Policy Settings */
|
|
|
|
/******************************************
|
|
** Lisbon Features
|
|
*******************************************/
|
|
#if BTM_SSR_INCLUDED == TRUE
|
|
/* Sniff Subrating */
|
|
BOOLEAN btsnd_hcic_sniff_sub_rate(UINT16 handle, UINT16 max_lat,
|
|
UINT16 min_remote_lat,
|
|
UINT16 min_local_lat);
|
|
|
|
#define HCIC_PARAM_SIZE_SNIFF_SUB_RATE 8
|
|
|
|
#define HCI_SNIFF_SUB_RATE_HANDLE_OFF 0
|
|
#define HCI_SNIFF_SUB_RATE_MAX_LAT_OFF 2
|
|
#define HCI_SNIFF_SUB_RATE_MIN_REM_LAT_OFF 4
|
|
#define HCI_SNIFF_SUB_RATE_MIN_LOC_LAT_OFF 6
|
|
/* Sniff Subrating */
|
|
|
|
#else /* BTM_SSR_INCLUDED == FALSE */
|
|
|
|
#define btsnd_hcic_sniff_sub_rate(handle, max_lat, min_remote_lat, min_local_lat) FALSE
|
|
|
|
#endif /* BTM_SSR_INCLUDED */
|
|
|
|
/* Extended Inquiry Response */
|
|
void btsnd_hcic_write_ext_inquiry_response(void *buffer, UINT8 fec_req);
|
|
|
|
#define HCIC_PARAM_SIZE_EXT_INQ_RESP 241
|
|
|
|
#define HCIC_EXT_INQ_RESP_FEC_OFF 0
|
|
#define HCIC_EXT_INQ_RESP_RESPONSE 1
|
|
/* IO Capabilities Response */
|
|
BOOLEAN btsnd_hcic_io_cap_req_reply (BD_ADDR bd_addr, UINT8 capability,
|
|
UINT8 oob_present, UINT8 auth_req);
|
|
|
|
#define HCIC_PARAM_SIZE_IO_CAP_RESP 9
|
|
|
|
#define HCI_IO_CAP_BD_ADDR_OFF 0
|
|
#define HCI_IO_CAPABILITY_OFF 6
|
|
#define HCI_IO_CAP_OOB_DATA_OFF 7
|
|
#define HCI_IO_CAP_AUTH_REQ_OFF 8
|
|
|
|
/* IO Capabilities Req Neg Reply */
|
|
BOOLEAN btsnd_hcic_io_cap_req_neg_reply (BD_ADDR bd_addr, UINT8 err_code);
|
|
|
|
#define HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY 7
|
|
|
|
#define HCI_IO_CAP_NR_BD_ADDR_OFF 0
|
|
#define HCI_IO_CAP_NR_ERR_CODE 6
|
|
|
|
/* Read Local OOB Data */
|
|
BOOLEAN btsnd_hcic_read_local_oob_data (void);
|
|
|
|
#define HCIC_PARAM_SIZE_R_LOCAL_OOB 0
|
|
|
|
|
|
BOOLEAN btsnd_hcic_user_conf_reply (BD_ADDR bd_addr, BOOLEAN is_yes);
|
|
|
|
#define HCIC_PARAM_SIZE_UCONF_REPLY 6
|
|
|
|
#define HCI_USER_CONF_BD_ADDR_OFF 0
|
|
|
|
|
|
BOOLEAN btsnd_hcic_user_passkey_reply (BD_ADDR bd_addr, UINT32 value);
|
|
|
|
#define HCIC_PARAM_SIZE_U_PKEY_REPLY 10
|
|
|
|
#define HCI_USER_PASSKEY_BD_ADDR_OFF 0
|
|
#define HCI_USER_PASSKEY_VALUE_OFF 6
|
|
|
|
|
|
BOOLEAN btsnd_hcic_user_passkey_neg_reply (BD_ADDR bd_addr);
|
|
|
|
#define HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY 6
|
|
|
|
#define HCI_USER_PASSKEY_NEG_BD_ADDR_OFF 0
|
|
|
|
/* Remote OOB Data Request Reply */
|
|
BOOLEAN btsnd_hcic_rem_oob_reply (BD_ADDR bd_addr, UINT8 *p_c,
|
|
UINT8 *p_r);
|
|
|
|
#define HCIC_PARAM_SIZE_REM_OOB_REPLY 38
|
|
|
|
#define HCI_REM_OOB_DATA_BD_ADDR_OFF 0
|
|
#define HCI_REM_OOB_DATA_C_OFF 6
|
|
#define HCI_REM_OOB_DATA_R_OFF 22
|
|
|
|
/* Remote OOB Data Request Negative Reply */
|
|
BOOLEAN btsnd_hcic_rem_oob_neg_reply (BD_ADDR bd_addr);
|
|
|
|
#define HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY 6
|
|
|
|
#define HCI_REM_OOB_DATA_NEG_BD_ADDR_OFF 0
|
|
|
|
/* Read Tx Power Level */
|
|
BOOLEAN btsnd_hcic_read_inq_tx_power (void);
|
|
|
|
#define HCIC_PARAM_SIZE_R_TX_POWER 0
|
|
|
|
/* Read Default Erroneous Data Reporting */
|
|
BOOLEAN btsnd_hcic_read_default_erroneous_data_rpt (void);
|
|
|
|
#define HCIC_PARAM_SIZE_R_ERR_DATA_RPT 0
|
|
|
|
#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
|
|
BOOLEAN btsnd_hcic_enhanced_flush (UINT16 handle, UINT8 packet_type);
|
|
|
|
#define HCIC_PARAM_SIZE_ENHANCED_FLUSH 3
|
|
#endif
|
|
|
|
|
|
BOOLEAN btsnd_hcic_send_keypress_notif (BD_ADDR bd_addr, UINT8 notif);
|
|
|
|
#define HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF 7
|
|
|
|
#define HCI_SEND_KEYPRESS_NOTIF_BD_ADDR_OFF 0
|
|
#define HCI_SEND_KEYPRESS_NOTIF_NOTIF_OFF 6
|
|
|
|
/**** end of Simple Pairing Commands ****/
|
|
|
|
/* Store Current Settings */
|
|
#define MAX_FILT_COND (sizeof (BD_ADDR) + 1)
|
|
|
|
BOOLEAN btsnd_hcic_set_event_filter(UINT8 filt_type,
|
|
UINT8 filt_cond_type,
|
|
UINT8 *filt_cond,
|
|
UINT8 filt_cond_len);
|
|
|
|
#define HCIC_PARAM_SIZE_SET_EVT_FILTER 9
|
|
|
|
#define HCI_FILT_COND_FILT_TYPE_OFF 0
|
|
#define HCI_FILT_COND_COND_TYPE_OFF 1
|
|
#define HCI_FILT_COND_FILT_OFF 2
|
|
/* Set Event Filter */
|
|
|
|
/* Delete Stored Key */
|
|
BOOLEAN btsnd_hcic_delete_stored_key (BD_ADDR bd_addr, BOOLEAN delete_all_flag);
|
|
|
|
#define HCIC_PARAM_SIZE_DELETE_STORED_KEY 7
|
|
|
|
#define HCI_DELETE_KEY_BD_ADDR_OFF 0
|
|
#define HCI_DELETE_KEY_ALL_FLAG_OFF 6
|
|
/* Delete Stored Key */
|
|
|
|
/* Change Local Name */
|
|
BOOLEAN btsnd_hcic_change_name(BD_NAME name);
|
|
|
|
#define HCIC_PARAM_SIZE_CHANGE_NAME BD_NAME_LEN
|
|
|
|
#define HCI_CHANGE_NAME_NAME_OFF 0
|
|
/* Change Local Name */
|
|
|
|
|
|
#define HCIC_PARAM_SIZE_READ_CMD 0
|
|
|
|
#define HCIC_PARAM_SIZE_WRITE_PARAM1 1
|
|
|
|
#define HCIC_WRITE_PARAM1_PARAM_OFF 0
|
|
|
|
#define HCIC_PARAM_SIZE_WRITE_PARAM2 2
|
|
|
|
#define HCIC_WRITE_PARAM2_PARAM_OFF 0
|
|
|
|
#define HCIC_PARAM_SIZE_WRITE_PARAM3 3
|
|
|
|
#define HCIC_WRITE_PARAM3_PARAM_OFF 0
|
|
|
|
#define HCIC_PARAM_SIZE_SET_AFH_CHANNELS 10
|
|
|
|
BOOLEAN btsnd_hcic_write_pin_type(UINT8 type); /* Write PIN Type */
|
|
BOOLEAN btsnd_hcic_write_auto_accept(UINT8 flag); /* Write Auto Accept */
|
|
BOOLEAN btsnd_hcic_read_name (void); /* Read Local Name */
|
|
BOOLEAN btsnd_hcic_write_page_tout(UINT16 timeout); /* Write Page Timout */
|
|
BOOLEAN btsnd_hcic_write_scan_enable(UINT8 flag); /* Write Scan Enable */
|
|
BOOLEAN btsnd_hcic_write_pagescan_cfg(UINT16 interval,
|
|
UINT16 window); /* Write Page Scan Activity */
|
|
|
|
#define HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG 4
|
|
|
|
#define HCI_SCAN_CFG_INTERVAL_OFF 0
|
|
#define HCI_SCAN_CFG_WINDOW_OFF 2
|
|
/* Write Page Scan Activity */
|
|
|
|
/* Write Inquiry Scan Activity */
|
|
BOOLEAN btsnd_hcic_write_inqscan_cfg(UINT16 interval, UINT16 window);
|
|
|
|
#define HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG 4
|
|
|
|
#define HCI_SCAN_CFG_INTERVAL_OFF 0
|
|
#define HCI_SCAN_CFG_WINDOW_OFF 2
|
|
/* Write Inquiry Scan Activity */
|
|
|
|
BOOLEAN btsnd_hcic_write_auth_enable(UINT8 flag); /* Write Authentication Enable */
|
|
BOOLEAN btsnd_hcic_write_dev_class(DEV_CLASS dev); /* Write Class of Device */
|
|
BOOLEAN btsnd_hcic_write_voice_settings(UINT16 flags); /* Write Voice Settings */
|
|
|
|
/* Host Controller to Host flow control */
|
|
#define HCI_HOST_FLOW_CTRL_OFF 0
|
|
#define HCI_HOST_FLOW_CTRL_ACL_ON 1
|
|
#define HCI_HOST_FLOW_CTRL_SCO_ON 2
|
|
#define HCI_HOST_FLOW_CTRL_BOTH_ON 3
|
|
|
|
BOOLEAN btsnd_hcic_write_auto_flush_tout(UINT16 handle,
|
|
UINT16 timeout); /* Write Retransmit Timout */
|
|
|
|
#define HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT 4
|
|
|
|
#define HCI_FLUSH_TOUT_HANDLE_OFF 0
|
|
#define HCI_FLUSH_TOUT_TOUT_OFF 2
|
|
|
|
BOOLEAN btsnd_hcic_read_tx_power(UINT16 handle, UINT8 type); /* Read Tx Power */
|
|
|
|
#define HCIC_PARAM_SIZE_READ_TX_POWER 3
|
|
|
|
#define HCI_READ_TX_POWER_HANDLE_OFF 0
|
|
#define HCI_READ_TX_POWER_TYPE_OFF 2
|
|
|
|
/* Read transmit power level parameter */
|
|
#define HCI_READ_CURRENT 0x00
|
|
#define HCI_READ_MAXIMUM 0x01
|
|
|
|
BOOLEAN btsnd_hcic_host_num_xmitted_pkts (UINT8 num_handles,
|
|
UINT16 *handle,
|
|
UINT16 *num_pkts); /* Set Host Buffer Size */
|
|
|
|
#define HCIC_PARAM_SIZE_NUM_PKTS_DONE_SIZE sizeof(btmsg_hcic_num_pkts_done_t)
|
|
|
|
#define MAX_DATA_HANDLES 10
|
|
|
|
#define HCI_PKTS_DONE_NUM_HANDLES_OFF 0
|
|
#define HCI_PKTS_DONE_HANDLE_OFF 1
|
|
#define HCI_PKTS_DONE_NUM_PKTS_OFF 3
|
|
|
|
/* Write Link Supervision Timeout */
|
|
BOOLEAN btsnd_hcic_write_link_super_tout(UINT8 local_controller_id, UINT16 handle, UINT16 timeout);
|
|
|
|
#define HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT 4
|
|
|
|
#define HCI_LINK_SUPER_TOUT_HANDLE_OFF 0
|
|
#define HCI_LINK_SUPER_TOUT_TOUT_OFF 2
|
|
/* Write Link Supervision Timeout */
|
|
|
|
BOOLEAN btsnd_hcic_write_cur_iac_lap (UINT8 num_cur_iac,
|
|
LAP *const iac_lap); /* Write Current IAC LAP */
|
|
|
|
#define MAX_IAC_LAPS 0x40
|
|
|
|
#define HCI_WRITE_IAC_LAP_NUM_OFF 0
|
|
#define HCI_WRITE_IAC_LAP_LAP_OFF 1
|
|
/* Write Current IAC LAP */
|
|
|
|
BOOLEAN btsnd_hcic_get_link_quality (UINT16 handle); /* Get Link Quality */
|
|
BOOLEAN btsnd_hcic_read_rssi (UINT16 handle); /* Read RSSI */
|
|
BOOLEAN btsnd_hcic_enable_test_mode (void); /* Enable Device Under Test Mode */
|
|
BOOLEAN btsnd_hcic_write_pagescan_type(UINT8 type); /* Write Page Scan Type */
|
|
BOOLEAN btsnd_hcic_write_inqscan_type(UINT8 type); /* Write Inquiry Scan Type */
|
|
BOOLEAN btsnd_hcic_write_inquiry_mode(UINT8 type); /* Write Inquiry Mode */
|
|
|
|
#define HCI_DATA_HANDLE_MASK 0x0FFF
|
|
|
|
#define HCID_GET_HANDLE_EVENT(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset) + \
|
|
(*((UINT8 *)((p) + 1) + p->offset + 1) << 8)))
|
|
|
|
#define HCID_GET_HANDLE(u16) (UINT16)((u16) & HCI_DATA_HANDLE_MASK)
|
|
|
|
#define HCI_DATA_EVENT_MASK 3
|
|
#define HCI_DATA_EVENT_OFFSET 12
|
|
#define HCID_GET_EVENT(u16) (UINT8)(((u16) >> HCI_DATA_EVENT_OFFSET) & HCI_DATA_EVENT_MASK)
|
|
|
|
#define HCI_DATA_BCAST_MASK 3
|
|
#define HCI_DATA_BCAST_OFFSET 10
|
|
#define HCID_GET_BCAST(u16) (UINT8)(((u16) >> HCI_DATA_BCAST_OFFSET) & HCI_DATA_BCAST_MASK)
|
|
|
|
#define HCID_GET_ACL_LEN(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset + 2) + \
|
|
(*((UINT8 *)((p) + 1) + p->offset + 3) << 8)))
|
|
|
|
#define HCID_HEADER_SIZE 4
|
|
|
|
#define HCID_GET_SCO_LEN(p) (*((UINT8 *)((p) + 1) + p->offset + 2))
|
|
|
|
void btsnd_hcic_vendor_spec_cmd (void *buffer, UINT16 opcode,
|
|
UINT8 len, UINT8 *p_data,
|
|
void *p_cmd_cplt_cback);
|
|
|
|
#if (BLE_INCLUDED == TRUE)
|
|
/********************************************************************************
|
|
** BLE Commands
|
|
** Note: "local_controller_id" is for transport, not counted in HCI message size
|
|
*********************************************************************************/
|
|
#define HCIC_BLE_RAND_DI_SIZE 8
|
|
#define HCIC_BLE_ENCRYT_KEY_SIZE 16
|
|
#define HCIC_BLE_IRK_SIZE 16
|
|
|
|
#define HCIC_PARAM_SIZE_SET_USED_FEAT_CMD 8
|
|
#define HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD 6
|
|
#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS 15
|
|
#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP 31
|
|
#define HCIC_PARAM_SIZE_WRITE_ADV_ENABLE 1
|
|
#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM 7
|
|
#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE 2
|
|
#define HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN 25
|
|
#define HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL 0
|
|
#define HCIC_PARAM_SIZE_CLEAR_WHITE_LIST 0
|
|
#define HCIC_PARAM_SIZE_ADD_WHITE_LIST 7
|
|
#define HCIC_PARAM_SIZE_REMOVE_WHITE_LIST 7
|
|
#define HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS 14
|
|
#define HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS 5
|
|
#define HCIC_PARAM_SIZE_READ_CHNL_MAP 2
|
|
#define HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT 2
|
|
#define HCIC_PARAM_SIZE_BLE_ENCRYPT 32
|
|
#define HCIC_PARAM_SIZE_BLE_RAND 0
|
|
#define HCIC_PARAM_SIZE_WRITE_LE_HOST_SUPPORTED 2
|
|
|
|
#define HCIC_BLE_RAND_DI_SIZE 8
|
|
#define HCIC_BLE_ENCRYT_KEY_SIZE 16
|
|
#define HCIC_PARAM_SIZE_BLE_START_ENC (4 + HCIC_BLE_RAND_DI_SIZE + HCIC_BLE_ENCRYT_KEY_SIZE)
|
|
#define HCIC_PARAM_SIZE_LTK_REQ_REPLY (2 + HCIC_BLE_ENCRYT_KEY_SIZE)
|
|
#define HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY 2
|
|
#define HCIC_BLE_CHNL_MAP_SIZE 5
|
|
#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA 31
|
|
|
|
#define HCIC_PARAM_SIZE_BLE_ADD_DEV_RESOLVING_LIST (7 + HCIC_BLE_IRK_SIZE * 2)
|
|
#define HCIC_PARAM_SIZE_BLE_RM_DEV_RESOLVING_LIST 7
|
|
#define HCIC_PARAM_SIZE_BLE_CLEAR_RESOLVING_LIST 0
|
|
#define HCIC_PARAM_SIZE_BLE_READ_RESOLVING_LIST_SIZE 0
|
|
#define HCIC_PARAM_SIZE_BLE_READ_RESOLVABLE_ADDR_PEER 7
|
|
#define HCIC_PARAM_SIZE_BLE_READ_RESOLVABLE_ADDR_LOCAL 7
|
|
#define HCIC_PARAM_SIZE_BLE_SET_ADDR_RESOLUTION_ENABLE 1
|
|
#define HCIC_PARAM_SIZE_BLE_SET_RAND_PRIV_ADDR_TIMOUT 2
|
|
#define HCIC_PARAM_SIZE_BLE_SET_DATA_LENGTH 6
|
|
#define HCIC_PARAM_SIZE_BLE_WRITE_EXTENDED_SCAN_PARAM 11
|
|
|
|
/* ULP HCI command */
|
|
BOOLEAN btsnd_hcic_ble_set_evt_mask (BT_EVENT_MASK event_mask);
|
|
|
|
BOOLEAN btsnd_hcic_ble_read_buffer_size (void);
|
|
|
|
BOOLEAN btsnd_hcic_ble_read_local_spt_feat (void);
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_local_used_feat (UINT8 feat_set[8]);
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_random_addr (BD_ADDR random_addr);
|
|
|
|
BOOLEAN btsnd_hcic_ble_write_adv_params (UINT16 adv_int_min, UINT16 adv_int_max,
|
|
UINT8 adv_type, UINT8 addr_type_own,
|
|
UINT8 addr_type_dir, BD_ADDR direct_bda,
|
|
UINT8 channel_map, UINT8 adv_filter_policy);
|
|
|
|
BOOLEAN btsnd_hcic_ble_read_adv_chnl_tx_power (void);
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_adv_data (UINT8 data_len, UINT8 *p_data);
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_scan_rsp_data (UINT8 data_len, UINT8 *p_scan_rsp);
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_adv_enable (UINT8 adv_enable);
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_scan_params (UINT8 scan_type,
|
|
UINT16 scan_int, UINT16 scan_win,
|
|
UINT8 addr_type, UINT8 scan_filter_policy);
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_scan_enable (UINT8 scan_enable, UINT8 duplicate);
|
|
|
|
BOOLEAN btsnd_hcic_ble_create_ll_conn (UINT16 scan_int, UINT16 scan_win,
|
|
UINT8 init_filter_policy, UINT8 addr_type_peer, BD_ADDR bda_peer, UINT8 addr_type_own,
|
|
UINT16 conn_int_min, UINT16 conn_int_max, UINT16 conn_latency, UINT16 conn_timeout,
|
|
UINT16 min_ce_len, UINT16 max_ce_len);
|
|
|
|
BOOLEAN btsnd_hcic_ble_create_conn_cancel (void);
|
|
|
|
BOOLEAN btsnd_hcic_ble_read_white_list_size (void);
|
|
|
|
BOOLEAN btsnd_hcic_ble_clear_white_list (void);
|
|
|
|
BOOLEAN btsnd_hcic_ble_add_white_list (UINT8 addr_type, BD_ADDR bda);
|
|
|
|
BOOLEAN btsnd_hcic_ble_remove_from_white_list (UINT8 addr_type, BD_ADDR bda);
|
|
|
|
BOOLEAN btsnd_hcic_ble_upd_ll_conn_params (UINT16 handle, UINT16 conn_int_min, UINT16 conn_int_max,
|
|
UINT16 conn_latency, UINT16 conn_timeout, UINT16 min_len, UINT16 max_len);
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_host_chnl_class (UINT8 chnl_map[HCIC_BLE_CHNL_MAP_SIZE]);
|
|
|
|
BOOLEAN btsnd_hcic_ble_read_chnl_map (UINT16 handle);
|
|
|
|
BOOLEAN btsnd_hcic_ble_read_remote_feat ( UINT16 handle);
|
|
|
|
BOOLEAN btsnd_hcic_ble_encrypt (UINT8 *key, UINT8 key_len, UINT8 *plain_text, UINT8 pt_len, void *p_cmd_cplt_cback);
|
|
|
|
BOOLEAN btsnd_hcic_ble_rand (void *p_cmd_cplt_cback);
|
|
|
|
BOOLEAN btsnd_hcic_ble_start_enc ( UINT16 handle,
|
|
UINT8 rand[HCIC_BLE_RAND_DI_SIZE],
|
|
UINT16 ediv, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]);
|
|
|
|
BOOLEAN btsnd_hcic_ble_ltk_req_reply (UINT16 handle, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]);
|
|
|
|
BOOLEAN btsnd_hcic_ble_ltk_req_neg_reply (UINT16 handle);
|
|
|
|
BOOLEAN btsnd_hcic_ble_read_supported_states (void);
|
|
|
|
BOOLEAN btsnd_hcic_ble_write_host_supported (UINT8 le_host_spt, UINT8 simul_le_host_spt);
|
|
|
|
BOOLEAN btsnd_hcic_ble_read_host_supported (void);
|
|
|
|
BOOLEAN btsnd_hcic_ble_receiver_test(UINT8 rx_freq);
|
|
|
|
BOOLEAN btsnd_hcic_ble_transmitter_test(UINT8 tx_freq, UINT8 test_data_len,
|
|
UINT8 payload);
|
|
BOOLEAN btsnd_hcic_ble_test_end(void);
|
|
|
|
#if (defined BLE_LLT_INCLUDED) && (BLE_LLT_INCLUDED == TRUE)
|
|
|
|
#define HCIC_PARAM_SIZE_BLE_RC_PARAM_REQ_REPLY 14
|
|
BOOLEAN btsnd_hcic_ble_rc_param_req_reply(UINT16 handle,
|
|
UINT16 conn_int_min, UINT16 conn_int_max,
|
|
UINT16 conn_latency, UINT16 conn_timeout,
|
|
UINT16 min_ce_len, UINT16 max_ce_len);
|
|
|
|
#define HCIC_PARAM_SIZE_BLE_RC_PARAM_REQ_NEG_REPLY 3
|
|
BOOLEAN btsnd_hcic_ble_rc_param_req_neg_reply(UINT16 handle, UINT8 reason);
|
|
|
|
#endif /* BLE_LLT_INCLUDED */
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_data_length(UINT16 conn_handle, UINT16 tx_octets,
|
|
UINT16 tx_time);
|
|
|
|
BOOLEAN btsnd_hcic_ble_add_device_resolving_list (UINT8 addr_type_peer,
|
|
BD_ADDR bda_peer,
|
|
UINT8 irk_peer[HCIC_BLE_IRK_SIZE],
|
|
UINT8 irk_local[HCIC_BLE_IRK_SIZE]);
|
|
|
|
BOOLEAN btsnd_hcic_ble_rm_device_resolving_list (UINT8 addr_type_peer,
|
|
BD_ADDR bda_peer);
|
|
|
|
BOOLEAN btsnd_hcic_ble_clear_resolving_list (void);
|
|
|
|
BOOLEAN btsnd_hcic_ble_read_resolvable_addr_peer (UINT8 addr_type_peer,
|
|
BD_ADDR bda_peer);
|
|
|
|
BOOLEAN btsnd_hcic_ble_read_resolvable_addr_local (UINT8 addr_type_peer,
|
|
BD_ADDR bda_peer);
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_addr_resolution_enable (UINT8 addr_resolution_enable);
|
|
|
|
BOOLEAN btsnd_hcic_ble_set_rand_priv_addr_timeout (UINT16 rpa_timout);
|
|
|
|
#endif /* BLE_INCLUDED */
|
|
|
|
BOOLEAN btsnd_hcic_read_authenticated_payload_tout(UINT16 handle);
|
|
|
|
BOOLEAN btsnd_hcic_write_authenticated_payload_tout(UINT16 handle,
|
|
UINT16 timeout);
|
|
|
|
#define HCIC_PARAM_SIZE_WRITE_AUTHENT_PAYLOAD_TOUT 4
|
|
|
|
#define HCI__WRITE_AUTHENT_PAYLOAD_TOUT_HANDLE_OFF 0
|
|
#define HCI__WRITE_AUTHENT_PAYLOAD_TOUT_TOUT_OFF 2
|
|
|
|
#endif
|