abd6d40796
and all ECDSA to be disabled if secure boot is not enabled Previously if ECDSA disabled in config then secure_boot_signatures.c would fail to build (whether or not secure boot was enabled). To avoid breaking apps that might be using the signature scheme with custom OTA without enabling secure boot signatures in config, this change just disables this functionality if unavailable in mbedTLS config. Possible fix for root cause of https://github.com/espressif/esp-idf/pull/3703
584 lines
27 KiB
Text
584 lines
27 KiB
Text
menu "Bootloader config"
|
|
choice BOOTLOADER_LOG_LEVEL
|
|
bool "Bootloader log verbosity"
|
|
default BOOTLOADER_LOG_LEVEL_INFO
|
|
help
|
|
Specify how much output to see in bootloader logs.
|
|
|
|
config BOOTLOADER_LOG_LEVEL_NONE
|
|
bool "No output"
|
|
config BOOTLOADER_LOG_LEVEL_ERROR
|
|
bool "Error"
|
|
config BOOTLOADER_LOG_LEVEL_WARN
|
|
bool "Warning"
|
|
config BOOTLOADER_LOG_LEVEL_INFO
|
|
bool "Info"
|
|
config BOOTLOADER_LOG_LEVEL_DEBUG
|
|
bool "Debug"
|
|
config BOOTLOADER_LOG_LEVEL_VERBOSE
|
|
bool "Verbose"
|
|
endchoice
|
|
|
|
config BOOTLOADER_LOG_LEVEL
|
|
int
|
|
default 0 if BOOTLOADER_LOG_LEVEL_NONE
|
|
default 1 if BOOTLOADER_LOG_LEVEL_ERROR
|
|
default 2 if BOOTLOADER_LOG_LEVEL_WARN
|
|
default 3 if BOOTLOADER_LOG_LEVEL_INFO
|
|
default 4 if BOOTLOADER_LOG_LEVEL_DEBUG
|
|
default 5 if BOOTLOADER_LOG_LEVEL_VERBOSE
|
|
|
|
config BOOTLOADER_SPI_WP_PIN
|
|
int "SPI Flash WP Pin when customising pins via eFuse (read help)"
|
|
range 0 33
|
|
default 7
|
|
depends on ESPTOOLPY_FLASHMODE_QIO || ESPTOOLPY_FLASHMODE_QOUT
|
|
help
|
|
This value is ignored unless flash mode is set to QIO or QOUT *and* the SPI flash pins have been
|
|
overriden by setting the eFuses SPI_PAD_CONFIG_xxx.
|
|
|
|
When this is the case, the eFuse config only defines 3 of the 4 Quad I/O data pins. The WP pin (aka ESP32
|
|
pin "SD_DATA_3" or SPI flash pin "IO2") is not specified in eFuse. That pin number is compiled into the
|
|
bootloader instead.
|
|
|
|
The default value (GPIO 7) is correct for WP pin on ESP32-D2WD integrated flash.
|
|
|
|
choice BOOTLOADER_VDDSDIO_BOOST
|
|
bool "VDDSDIO LDO voltage"
|
|
default BOOTLOADER_VDDSDIO_BOOST_1_9V
|
|
help
|
|
If this option is enabled, and VDDSDIO LDO is set to 1.8V (using eFuse
|
|
or MTDI bootstrapping pin), bootloader will change LDO settings to
|
|
output 1.9V instead. This helps prevent flash chip from browning out
|
|
during flash programming operations.
|
|
|
|
This option has no effect if VDDSDIO is set to 3.3V, or if the internal
|
|
VDDSDIO regulator is disabled via eFuse.
|
|
|
|
config BOOTLOADER_VDDSDIO_BOOST_1_8V
|
|
bool "1.8V"
|
|
depends on !ESPTOOLPY_FLASHFREQ_80M
|
|
config BOOTLOADER_VDDSDIO_BOOST_1_9V
|
|
bool "1.9V"
|
|
endchoice
|
|
|
|
config BOOTLOADER_FACTORY_RESET
|
|
bool "GPIO triggers factory reset"
|
|
default N
|
|
help
|
|
Allows to reset the device to factory settings:
|
|
- clear one or more data partitions;
|
|
- boot from "factory" partition.
|
|
The factory reset will occur if there is a GPIO input pulled low while device starts up.
|
|
See settings below.
|
|
|
|
config BOOTLOADER_NUM_PIN_FACTORY_RESET
|
|
int "Number of the GPIO input for factory reset"
|
|
depends on BOOTLOADER_FACTORY_RESET
|
|
range 0 39
|
|
default 4
|
|
help
|
|
The selected GPIO will be configured as an input with internal pull-up enabled.
|
|
To trigger a factory reset, this GPIO must be pulled low on reset.
|
|
Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
|
|
|
|
config BOOTLOADER_OTA_DATA_ERASE
|
|
bool "Clear OTA data on factory reset (select factory partition)"
|
|
depends on BOOTLOADER_FACTORY_RESET
|
|
help
|
|
The device will boot from "factory" partition (or OTA slot 0 if no factory partition is present) after a
|
|
factory reset.
|
|
|
|
config BOOTLOADER_DATA_FACTORY_RESET
|
|
string "Comma-separated names of partitions to clear on factory reset"
|
|
depends on BOOTLOADER_FACTORY_RESET
|
|
default "nvs"
|
|
help
|
|
Allows customers to select which data partitions will be erased while factory reset.
|
|
|
|
Specify the names of partitions as a comma-delimited with optional spaces for readability. (Like this:
|
|
"nvs, phy_init, ...")
|
|
Make sure that the name specified in the partition table and here are the same.
|
|
Partitions of type "app" cannot be specified here.
|
|
|
|
config BOOTLOADER_APP_TEST
|
|
bool "GPIO triggers boot from test app partition"
|
|
default N
|
|
help
|
|
Allows to run the test app from "TEST" partition.
|
|
A boot from "test" partition will occur if there is a GPIO input pulled low while device starts up.
|
|
See settings below.
|
|
|
|
config BOOTLOADER_NUM_PIN_APP_TEST
|
|
int "Number of the GPIO input to boot TEST partition"
|
|
depends on BOOTLOADER_APP_TEST
|
|
range 0 39
|
|
default 18
|
|
help
|
|
The selected GPIO will be configured as an input with internal pull-up enabled.
|
|
To trigger a test app, this GPIO must be pulled low on reset.
|
|
After the GPIO input is deactivated and the device reboots, the old application will boot.
|
|
(factory or OTA[x]).
|
|
Note that GPIO34-39 do not have an internal pullup and an external one must be provided.
|
|
|
|
config BOOTLOADER_HOLD_TIME_GPIO
|
|
int "Hold time of GPIO for reset/test mode (seconds)"
|
|
depends on BOOTLOADER_FACTORY_RESET || BOOTLOADER_APP_TEST
|
|
default 5
|
|
help
|
|
The GPIO must be held low continuously for this period of time after reset
|
|
before a factory reset or test partition boot (as applicable) is performed.
|
|
|
|
config BOOTLOADER_WDT_ENABLE
|
|
bool "Use RTC watchdog in start code"
|
|
default y
|
|
help
|
|
Tracks the execution time of startup code.
|
|
If the execution time is exceeded, the RTC_WDT will restart system.
|
|
It is also useful to prevent a lock up in start code caused by an unstable power source.
|
|
NOTE: Tracks the execution time starts from the bootloader code - re-set timeout, while selecting the
|
|
source for slow_clk - and ends calling app_main.
|
|
Re-set timeout is needed due to WDT uses a SLOW_CLK clock source. After changing a frequency slow_clk a
|
|
time of WDT needs to re-set for new frequency.
|
|
slow_clk depends on ESP32_RTC_CLK_SRC (INTERNAL_RC or EXTERNAL_CRYSTAL).
|
|
|
|
config BOOTLOADER_WDT_DISABLE_IN_USER_CODE
|
|
bool "Allows RTC watchdog disable in user code"
|
|
depends on BOOTLOADER_WDT_ENABLE
|
|
default n
|
|
help
|
|
If it is set, the client must itself reset or disable rtc_wdt in their code (app_main()).
|
|
Otherwise rtc_wdt will be disabled before calling app_main function.
|
|
Use function rtc_wdt_feed() for resetting counter of rtc_wdt.
|
|
Use function rtc_wdt_disable() for disabling rtc_wdt.
|
|
|
|
config BOOTLOADER_WDT_TIME_MS
|
|
int "Timeout for RTC watchdog (ms)"
|
|
depends on BOOTLOADER_WDT_ENABLE
|
|
default 9000
|
|
range 0 120000
|
|
help
|
|
Verify that this parameter is correct and more then the execution time.
|
|
Pay attention to options such as reset to factory, trigger test partition and encryption on boot
|
|
- these options can increase the execution time.
|
|
Note: RTC_WDT will reset while encryption operations will be performed.
|
|
|
|
config BOOTLOADER_APP_ROLLBACK_ENABLE
|
|
bool "Enable app rollback support"
|
|
default n
|
|
help
|
|
After updating the app, the bootloader runs a new app with the "ESP_OTA_IMG_PENDING_VERIFY" state set.
|
|
This state prevents the re-run of this app. After the first boot of the new app in the user code, the
|
|
function should be called to confirm the operability of the app or vice versa about its non-operability.
|
|
If the app is working, then it is marked as valid. Otherwise, it is marked as not valid and rolls back to
|
|
the previous working app. A reboot is performed, and the app is booted before the software update.
|
|
Note: If during the first boot a new app the power goes out or the WDT works, then roll back will happen.
|
|
Rollback is possible only between the apps with the same security versions.
|
|
|
|
config BOOTLOADER_APP_ANTI_ROLLBACK
|
|
bool "Enable app anti-rollback support"
|
|
depends on BOOTLOADER_APP_ROLLBACK_ENABLE
|
|
default n
|
|
help
|
|
This option prevents rollback to previous firmware/application image with lower security version.
|
|
|
|
config BOOTLOADER_APP_SECURE_VERSION
|
|
int "eFuse secure version of app"
|
|
depends on BOOTLOADER_APP_ANTI_ROLLBACK
|
|
default 0
|
|
help
|
|
The secure version is the sequence number stored in the header of each firmware.
|
|
The security version is set in the bootloader, version is recorded in the eFuse field
|
|
as the number of set ones. The allocated number of bits in the efuse field
|
|
for storing the security version is limited (see BOOTLOADER_APP_SEC_VER_SIZE_EFUSE_FIELD option).
|
|
|
|
Bootloader: When bootloader selects an app to boot, an app is selected that has
|
|
a security version greater or equal that recorded in eFuse field.
|
|
The app is booted with a higher (or equal) secure version.
|
|
|
|
The security version is worth increasing if in previous versions there is
|
|
a significant vulnerability and their use is not acceptable.
|
|
|
|
Your partition table should has a scheme with ota_0 + ota_1 (without factory).
|
|
|
|
config BOOTLOADER_APP_SEC_VER_SIZE_EFUSE_FIELD
|
|
int "Size of the efuse secure version field"
|
|
depends on BOOTLOADER_APP_ANTI_ROLLBACK
|
|
range 1 32
|
|
default 32
|
|
help
|
|
The size of the efuse secure version field. Its length is limited to 32 bits.
|
|
This determines how many times the security version can be increased.
|
|
|
|
config BOOTLOADER_EFUSE_SECURE_VERSION_EMULATE
|
|
bool "Emulate operations with efuse secure version(only test)"
|
|
default n
|
|
depends on BOOTLOADER_APP_ANTI_ROLLBACK
|
|
help
|
|
This option allow emulate read/write operations with efuse secure version.
|
|
It allow to test anti-rollback implemention without permanent write eFuse bits.
|
|
In partition table should be exist this partition `emul_efuse, data, 5, , 0x2000`.
|
|
|
|
config BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP
|
|
bool "Skip image validation when exiting deep sleep"
|
|
depends on (SECURE_BOOT_ENABLED && SECURE_BOOT_INSECURE) || !SECURE_BOOT_ENABLED
|
|
default n
|
|
help
|
|
This option disables the normal validation of an image coming out of
|
|
deep sleep (checksums, SHA256, and signature). This is a trade-off
|
|
between wakeup performance from deep sleep, and image integrity checks.
|
|
|
|
Only enable this if you know what you are doing. It should not be used
|
|
in conjunction with using deep_sleep() entry and changing the active OTA
|
|
partition as this would skip the validation upon first load of the new
|
|
OTA partition.
|
|
|
|
config BOOTLOADER_RESERVE_RTC_SIZE
|
|
hex
|
|
default 0x10 if BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP || BOOTLOADER_CUSTOM_RESERVE_RTC
|
|
default 0
|
|
help
|
|
Reserve RTC FAST memory for Skip image validation. This option in bytes.
|
|
This option reserves an area in the RTC FAST memory (access only PRO_CPU).
|
|
Used to save the addresses of the selected application.
|
|
When a wakeup occurs (from Deep sleep), the bootloader retrieves it and
|
|
loads the application without validation.
|
|
|
|
config BOOTLOADER_CUSTOM_RESERVE_RTC
|
|
bool "Reserve RTC FAST memory for custom purposes"
|
|
default n
|
|
help
|
|
This option allows the customer to place data in the RTC FAST memory,
|
|
this area remains valid when rebooted, except for power loss.
|
|
This memory is located at a fixed address and is available
|
|
for both the bootloader and the application.
|
|
(The application and bootoloader must be compiled with the same option).
|
|
The RTC FAST memory has access only through PRO_CPU.
|
|
|
|
config BOOTLOADER_CUSTOM_RESERVE_RTC_SIZE
|
|
hex "Size in bytes for custom purposes"
|
|
range 0 0x10
|
|
default 0
|
|
depends on BOOTLOADER_CUSTOM_RESERVE_RTC
|
|
help
|
|
This option reserves in RTC FAST memory the area for custom purposes.
|
|
If you want to create your own bootloader and save more information
|
|
in this area of memory, you can increase it. It must be a multiple of 4 bytes.
|
|
This area (rtc_retain_mem_t) is reserved and has access from the bootloader and an application.
|
|
|
|
endmenu # Bootloader
|
|
|
|
|
|
menu "Security features"
|
|
|
|
# These three are the actual options to check in code,
|
|
# selected by the displayed options
|
|
config SECURE_SIGNED_ON_BOOT
|
|
bool
|
|
default y
|
|
depends on SECURE_BOOT_ENABLED || SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
|
|
|
|
config SECURE_SIGNED_ON_UPDATE
|
|
bool
|
|
default y
|
|
depends on SECURE_BOOT_ENABLED || SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
|
|
|
|
config SECURE_SIGNED_APPS
|
|
bool
|
|
default y
|
|
select MBEDTLS_ECP_DP_SECP256R1_ENABLED
|
|
select MBEDTLS_ECP_C
|
|
select MBEDTLS_ECDH_C
|
|
select MBEDTLS_ECDSA_C
|
|
depends on SECURE_SIGNED_ON_BOOT || SECURE_SIGNED_ON_UPDATE
|
|
|
|
|
|
config SECURE_SIGNED_APPS_NO_SECURE_BOOT
|
|
bool "Require signed app images"
|
|
default n
|
|
depends on !SECURE_BOOT_ENABLED
|
|
help
|
|
Require apps to be signed to verify their integrity.
|
|
|
|
This option uses the same app signature scheme as hardware secure boot, but unlike hardware secure boot it
|
|
does not prevent the bootloader from being physically updated. This means that the device can be secured
|
|
against remote network access, but not physical access. Compared to using hardware Secure Boot this option
|
|
is much simpler to implement.
|
|
|
|
config SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT
|
|
bool "Bootloader verifies app signatures"
|
|
default n
|
|
depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
|
|
help
|
|
If this option is set, the bootloader will be compiled with code to verify that an app is signed before
|
|
booting it.
|
|
|
|
If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
|
|
If hardware secure boot is not enabled, this option doesn't add significant security by itself so most
|
|
users will want to leave it disabled.
|
|
|
|
config SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
|
|
bool "Verify app signature on update"
|
|
default y
|
|
depends on SECURE_SIGNED_APPS_NO_SECURE_BOOT
|
|
help
|
|
If this option is set, any OTA updated apps will have the signature verified before being considered valid.
|
|
|
|
When enabled, the signature is automatically checked whenever the esp_ota_ops.h APIs are used for OTA
|
|
updates, or esp_image_format.h APIs are used to verify apps.
|
|
|
|
If hardware secure boot is enabled, this option is always enabled and cannot be disabled.
|
|
If hardware secure boot is not enabled, this option still adds significant security against network-based
|
|
attackers by preventing spoofing of OTA updates.
|
|
|
|
config SECURE_BOOT_ENABLED
|
|
bool "Enable hardware secure boot in bootloader (READ DOCS FIRST)"
|
|
default n
|
|
help
|
|
Build a bootloader which enables secure boot on first boot.
|
|
|
|
Once enabled, secure boot will not boot a modified bootloader. The bootloader will only load a partition
|
|
table or boot an app if the data has a verified digital signature. There are implications for reflashing
|
|
updated apps once secure boot is enabled.
|
|
|
|
When enabling secure boot, JTAG and ROM BASIC Interpreter are permanently disabled by default.
|
|
|
|
Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
|
|
|
|
choice SECURE_BOOTLOADER_MODE
|
|
bool "Secure bootloader mode"
|
|
depends on SECURE_BOOT_ENABLED
|
|
default SECURE_BOOTLOADER_ONE_TIME_FLASH
|
|
|
|
config SECURE_BOOTLOADER_ONE_TIME_FLASH
|
|
bool "One-time flash"
|
|
help
|
|
On first boot, the bootloader will generate a key which is not readable externally or by software. A
|
|
digest is generated from the bootloader image itself. This digest will be verified on each subsequent
|
|
boot.
|
|
|
|
Enabling this option means that the bootloader cannot be changed after the first time it is booted.
|
|
|
|
config SECURE_BOOTLOADER_REFLASHABLE
|
|
bool "Reflashable"
|
|
help
|
|
Generate a reusable secure bootloader key, derived (via SHA-256) from the secure boot signing key.
|
|
|
|
This allows the secure bootloader to be re-flashed by anyone with access to the secure boot signing
|
|
key.
|
|
|
|
This option is less secure than one-time flash, because a leak of the digest key from one device
|
|
allows reflashing of any device that uses it.
|
|
|
|
endchoice
|
|
|
|
config SECURE_BOOT_BUILD_SIGNED_BINARIES
|
|
bool "Sign binaries during build"
|
|
depends on SECURE_SIGNED_APPS
|
|
default y
|
|
help
|
|
Once secure boot or signed app requirement is enabled, app images are required to be signed.
|
|
|
|
If enabled (default), these binary files are signed as part of the build process. The file named in
|
|
"Secure boot private signing key" will be used to sign the image.
|
|
|
|
If disabled, unsigned app/partition data will be built. They must be signed manually using espsecure.py
|
|
(for example, on a remote signing server.)
|
|
|
|
config SECURE_BOOT_SIGNING_KEY
|
|
string "Secure boot private signing key"
|
|
depends on SECURE_BOOT_BUILD_SIGNED_BINARIES
|
|
default secure_boot_signing_key.pem
|
|
help
|
|
Path to the key file used to sign app images.
|
|
|
|
Key file is an ECDSA private key (NIST256p curve) in PEM format.
|
|
|
|
Path is evaluated relative to the project directory.
|
|
|
|
You can generate a new signing key by running the following command:
|
|
espsecure.py generate_signing_key secure_boot_signing_key.pem
|
|
|
|
See https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html for details.
|
|
|
|
config SECURE_BOOT_VERIFICATION_KEY
|
|
string "Secure boot public signature verification key"
|
|
depends on SECURE_SIGNED_APPS && !SECURE_BOOT_BUILD_SIGNED_BINARIES
|
|
default signature_verification_key.bin
|
|
help
|
|
Path to a public key file used to verify signed images. This key is compiled into the bootloader and/or
|
|
app, to verify app images.
|
|
|
|
Key file is in raw binary format, and can be extracted from a
|
|
PEM formatted private key using the espsecure.py
|
|
extract_public_key command.
|
|
|
|
Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
|
|
|
|
choice SECURE_BOOTLOADER_KEY_ENCODING
|
|
bool "Hardware Key Encoding"
|
|
depends on SECURE_BOOTLOADER_REFLASHABLE
|
|
default SECURE_BOOTLOADER_NO_ENCODING
|
|
help
|
|
|
|
In reflashable secure bootloader mode, a hardware key is derived from the signing key (with SHA-256) and
|
|
can be written to eFuse with espefuse.py.
|
|
|
|
Normally this is a 256-bit key, but if 3/4 Coding Scheme is used on the device then the eFuse key is
|
|
truncated to 192 bits.
|
|
|
|
This configuration item doesn't change any firmware code, it only changes the size of key binary which is
|
|
generated at build time.
|
|
|
|
config SECURE_BOOTLOADER_KEY_ENCODING_256BIT
|
|
bool "No encoding (256 bit key)"
|
|
|
|
config SECURE_BOOTLOADER_KEY_ENCODING_192BIT
|
|
bool "3/4 encoding (192 bit key)"
|
|
|
|
endchoice
|
|
|
|
config SECURE_BOOT_INSECURE
|
|
bool "Allow potentially insecure options"
|
|
depends on SECURE_BOOT_ENABLED
|
|
default N
|
|
help
|
|
You can disable some of the default protections offered by secure boot, in order to enable testing or a
|
|
custom combination of security features.
|
|
|
|
Only enable these options if you are very sure.
|
|
|
|
Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html before enabling.
|
|
|
|
config SECURE_FLASH_ENC_ENABLED
|
|
bool "Enable flash encryption on boot (READ DOCS FIRST)"
|
|
default N
|
|
help
|
|
If this option is set, flash contents will be encrypted by the bootloader on first boot.
|
|
|
|
Note: After first boot, the system will be permanently encrypted. Re-flashing an encrypted
|
|
system is complicated and not always possible.
|
|
|
|
Read https://docs.espressif.com/projects/esp-idf/en/latest/security/flash-encryption.html
|
|
before enabling.
|
|
|
|
choice SECURE_FLASH_ENCRYPTION_MODE
|
|
bool "Enable usage mode"
|
|
depends on SECURE_FLASH_ENC_ENABLED
|
|
default SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
help
|
|
By default Development mode is enabled which allows UART bootloader to perform flash encryption operations
|
|
|
|
Select Release mode only for production or manufacturing. Once enabled you can not reflash using UART
|
|
bootloader
|
|
|
|
Refer to https://docs.espressif.com/projects/esp-idf/en/latest/security/secure-boot.html and
|
|
https://docs.espressif.com/projects/esp-idf/en/latest/security/flash-encryption.html for details.
|
|
|
|
config SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
bool "Development(NOT SECURE)"
|
|
select SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
|
|
|
|
config SECURE_FLASH_ENCRYPTION_MODE_RELEASE
|
|
bool "Release"
|
|
|
|
endchoice
|
|
|
|
menu "Potentially insecure options"
|
|
visible if SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT || SECURE_BOOT_INSECURE
|
|
|
|
# NOTE: Options in this menu NEED to have SECURE_BOOT_INSECURE
|
|
# and/or SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT in "depends on", as the menu
|
|
# itself doesn't enable/disable its children (if it's not set,
|
|
# it's possible for the insecure menu to be disabled but the insecure option
|
|
# to remain on which is very bad.)
|
|
|
|
config SECURE_BOOT_ALLOW_ROM_BASIC
|
|
bool "Leave ROM BASIC Interpreter available on reset"
|
|
depends on SECURE_BOOT_INSECURE || SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
By default, the BASIC ROM Console starts on reset if no valid bootloader is
|
|
read from the flash.
|
|
|
|
When either flash encryption or secure boot are enabled, the default is to
|
|
disable this BASIC fallback mode permanently via eFuse.
|
|
|
|
If this option is set, this eFuse is not burned and the BASIC ROM Console may
|
|
remain accessible. Only set this option in testing environments.
|
|
|
|
config SECURE_BOOT_ALLOW_JTAG
|
|
bool "Allow JTAG Debugging"
|
|
depends on SECURE_BOOT_INSECURE || SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable JTAG (across entire chip) on first boot
|
|
when either secure boot or flash encryption is enabled.
|
|
|
|
Setting this option leaves JTAG on for debugging, which negates all protections of flash encryption
|
|
and some of the protections of secure boot.
|
|
|
|
Only set this option in testing environments.
|
|
|
|
config SECURE_BOOT_ALLOW_SHORT_APP_PARTITION
|
|
bool "Allow app partition length not 64KB aligned"
|
|
depends on SECURE_BOOT_INSECURE
|
|
help
|
|
If not set (default), app partition size must be a multiple of 64KB. App images are padded to 64KB
|
|
length, and the bootloader checks any trailing bytes after the signature (before the next 64KB
|
|
boundary) have not been written. This is because flash cache maps entire 64KB pages into the address
|
|
space. This prevents an attacker from appending unverified data after the app image in the flash,
|
|
causing it to be mapped into the address space.
|
|
|
|
Setting this option allows the app partition length to be unaligned, and disables padding of the app
|
|
image to this length. It is generally not recommended to set this option, unless you have a legacy
|
|
partitioning scheme which doesn't support 64KB aligned partition lengths.
|
|
|
|
config SECURE_FLASH_UART_BOOTLOADER_ALLOW_ENC
|
|
bool "Leave UART bootloader encryption enabled"
|
|
depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable UART bootloader encryption access on
|
|
first boot. If set, the UART bootloader will still be able to access hardware encryption.
|
|
|
|
It is recommended to only set this option in testing environments.
|
|
|
|
config SECURE_FLASH_UART_BOOTLOADER_ALLOW_DEC
|
|
bool "Leave UART bootloader decryption enabled"
|
|
depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable UART bootloader decryption access on
|
|
first boot. If set, the UART bootloader will still be able to access hardware decryption.
|
|
|
|
Only set this option in testing environments. Setting this option allows complete bypass of flash
|
|
encryption.
|
|
|
|
config SECURE_FLASH_UART_BOOTLOADER_ALLOW_CACHE
|
|
bool "Leave UART bootloader flash cache enabled"
|
|
depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
If not set (default), the bootloader will permanently disable UART bootloader flash cache access on
|
|
first boot. If set, the UART bootloader will still be able to access the flash cache.
|
|
|
|
Only set this option in testing environments.
|
|
|
|
config SECURE_FLASH_REQUIRE_ALREADY_ENABLED
|
|
bool "Require flash encryption to be already enabled"
|
|
depends on SECURE_FLASH_ENCRYPTION_MODE_DEVELOPMENT
|
|
default N
|
|
help
|
|
If not set (default), and flash encryption is not yet enabled in eFuses, the 2nd stage bootloader
|
|
will enable flash encryption: generate the flash encryption key and program eFuses.
|
|
If this option is set, and flash encryption is not yet enabled, the bootloader will error out and
|
|
reboot.
|
|
If flash encryption is enabled in eFuses, this option does not change the bootloader behavior.
|
|
|
|
Only use this option in testing environments, to avoid accidentally enabling flash encryption on
|
|
the wrong device. The device needs to have flash encryption already enabled using espefuse.py.
|
|
|
|
endmenu # Potentially Insecure
|
|
endmenu # Security features
|
|
|