304 lines
12 KiB
C
304 lines
12 KiB
C
/**
|
|
* test environment UT_T2_I2C:
|
|
* please prepare two ESP32-WROVER-KIT board.
|
|
* Then connect GPIO18 and GPIO18, GPIO19 and GPIO19 between these two boards.
|
|
*/
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include "unity.h"
|
|
#include "test_utils.h"
|
|
#include "unity_config.h"
|
|
#include "driver/i2c.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_log.h"
|
|
#include "soc/gpio_periph.h"
|
|
#include "soc/i2c_periph.h"
|
|
#include "esp_system.h"
|
|
#include "driver/pcnt.h"
|
|
|
|
|
|
#define DATA_LENGTH 512 /*!<Data buffer length for test buffer*/
|
|
#define RW_TEST_LENGTH 129 /*!<Data length for r/w test, any value from 0-DATA_LENGTH*/
|
|
#define DELAY_TIME_BETWEEN_ITEMS_MS 1234 /*!< delay time between different test items */
|
|
|
|
#define I2C_SLAVE_SCL_IO 19 /*!<gpio number for i2c slave clock */
|
|
#define I2C_SLAVE_SDA_IO 18 /*!<gpio number for i2c slave data */
|
|
#define I2C_SLAVE_NUM I2C_NUM_0 /*!<I2C port number for slave dev */
|
|
#define I2C_SLAVE_TX_BUF_LEN (2*DATA_LENGTH) /*!<I2C slave tx buffer size */
|
|
#define I2C_SLAVE_RX_BUF_LEN (2*DATA_LENGTH) /*!<I2C slave rx buffer size */
|
|
|
|
#define I2C_MASTER_SCL_IO 19 /*!< gpio number for I2C master clock */
|
|
#define I2C_MASTER_SDA_IO 18 /*!< gpio number for I2C master data */
|
|
#define I2C_MASTER_NUM I2C_NUM_1 /*!< I2C port number for master dev */
|
|
#define I2C_MASTER_TX_BUF_DISABLE 0 /*!< I2C master do not need buffer */
|
|
#define I2C_MASTER_RX_BUF_DISABLE 0 /*!< I2C master do not need buffer */
|
|
#define I2C_MASTER_FREQ_HZ 100000 /*!< I2C master clock frequency */
|
|
|
|
#define ESP_SLAVE_ADDR 0x28 /*!< ESP32 slave address, you can set any 7bit value */
|
|
#define WRITE_BIT I2C_MASTER_WRITE /*!< I2C master write */
|
|
#define READ_BIT I2C_MASTER_READ /*!< I2C master read */
|
|
#define ACK_CHECK_EN 0x1 /*!< I2C master will check ack from slave*/
|
|
#define ACK_CHECK_DIS 0x0 /*!< I2C master will not check ack from slave */
|
|
#define ACK_VAL 0x0 /*!< I2C ack value */
|
|
#define NACK_VAL 0x1 /*!< I2C nack value */
|
|
|
|
#define PULSE_IO 19
|
|
#define PCNT_INPUT_IO 4
|
|
#define PCNT_CTRL_FLOATING_IO 5
|
|
#define HIGHEST_LIMIT 10000
|
|
#define LOWEST_LIMIT -10000
|
|
|
|
static DRAM_ATTR i2c_dev_t *const I2C[I2C_NUM_MAX] = { &I2C0, &I2C1 };
|
|
|
|
static esp_err_t i2c_master_write_slave(i2c_port_t i2c_num, uint8_t *data_wr, size_t size)
|
|
{
|
|
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
|
|
i2c_master_start(cmd);
|
|
TEST_ESP_OK(i2c_master_write_byte(cmd, ( ESP_SLAVE_ADDR << 1 ) | WRITE_BIT, ACK_CHECK_EN));
|
|
TEST_ESP_OK(i2c_master_write(cmd, data_wr, size, ACK_CHECK_EN));
|
|
TEST_ESP_OK(i2c_master_stop(cmd));
|
|
esp_err_t ret = i2c_master_cmd_begin(i2c_num, cmd, 5000 / portTICK_RATE_MS);
|
|
i2c_cmd_link_delete(cmd);
|
|
return ret;
|
|
}
|
|
|
|
static i2c_config_t i2c_master_init(void)
|
|
{
|
|
i2c_config_t conf_master = {
|
|
.mode = I2C_MODE_MASTER,
|
|
.sda_pullup_en = GPIO_PULLUP_ENABLE,
|
|
.scl_pullup_en = GPIO_PULLUP_ENABLE,
|
|
.master.clk_speed = I2C_MASTER_FREQ_HZ,
|
|
.sda_io_num = I2C_MASTER_SDA_IO,
|
|
.scl_io_num = I2C_MASTER_SCL_IO,
|
|
};
|
|
return conf_master;
|
|
}
|
|
|
|
static i2c_config_t i2c_slave_init(void)
|
|
{
|
|
i2c_config_t conf_slave = {
|
|
.mode = I2C_MODE_SLAVE,
|
|
.sda_io_num = I2C_SLAVE_SDA_IO,
|
|
.scl_io_num = I2C_SLAVE_SCL_IO,
|
|
.sda_pullup_en = GPIO_PULLUP_ENABLE,
|
|
.scl_pullup_en = GPIO_PULLUP_ENABLE,
|
|
.slave.addr_10bit_en = 0,
|
|
.slave.slave_addr = ESP_SLAVE_ADDR,
|
|
};
|
|
return conf_slave;
|
|
}
|
|
|
|
TEST_CASE("I2C config test", "[i2c]")
|
|
{
|
|
// master test
|
|
i2c_config_t conf_master = i2c_master_init();
|
|
gpio_pullup_t sda_pull_up_en[2] = {GPIO_PULLUP_DISABLE, GPIO_PULLUP_ENABLE};
|
|
gpio_pullup_t scl_pull_up_en[2] = {GPIO_PULLUP_DISABLE, GPIO_PULLUP_ENABLE};
|
|
|
|
for (int i = 0; i < 2; i++) {
|
|
for (int j = 0; j < 2; j++) {
|
|
conf_master.sda_pullup_en = sda_pull_up_en[i];
|
|
conf_master.scl_pullup_en = scl_pull_up_en[j];
|
|
TEST_ESP_OK(i2c_param_config(I2C_MASTER_NUM, &conf_master));
|
|
TEST_ASSERT_EQUAL_INT32(I2C[I2C_MASTER_NUM]->ctr.ms_mode, 1);
|
|
TEST_ESP_OK(i2c_driver_install(I2C_MASTER_NUM, I2C_MODE_MASTER,
|
|
I2C_MASTER_RX_BUF_DISABLE,
|
|
I2C_MASTER_TX_BUF_DISABLE, 0));
|
|
TEST_ESP_OK(i2c_driver_delete(I2C_MASTER_NUM));
|
|
}
|
|
}
|
|
|
|
// slave test
|
|
i2c_config_t conf_slave = i2c_slave_init();
|
|
for (int i = 0; i < 2; i++) {
|
|
for (int j = 0; j < 2; j++) {
|
|
conf_master.sda_pullup_en = sda_pull_up_en[i];
|
|
conf_master.scl_pullup_en = scl_pull_up_en[j];
|
|
conf_slave.sda_pullup_en = sda_pull_up_en[i];
|
|
conf_slave.scl_pullup_en = scl_pull_up_en[j];
|
|
TEST_ESP_OK(i2c_param_config( I2C_SLAVE_NUM, &conf_slave));
|
|
TEST_ASSERT_EQUAL_INT32(I2C[I2C_SLAVE_NUM] -> ctr.ms_mode, 0);
|
|
TEST_ESP_OK(i2c_driver_install(I2C_SLAVE_NUM, I2C_MODE_SLAVE,
|
|
I2C_SLAVE_RX_BUF_LEN,
|
|
I2C_SLAVE_TX_BUF_LEN, 0));
|
|
TEST_ESP_OK(i2c_driver_delete(I2C_SLAVE_NUM));
|
|
}
|
|
}
|
|
|
|
|
|
}
|
|
|
|
TEST_CASE("I2C set and get period test", "[i2c]")
|
|
{
|
|
int high_period, low_period;
|
|
i2c_config_t conf_master = i2c_master_init();
|
|
TEST_ESP_OK(i2c_param_config(I2C_MASTER_NUM, &conf_master));
|
|
TEST_ESP_OK(i2c_driver_install(I2C_MASTER_NUM, I2C_MODE_MASTER,
|
|
I2C_MASTER_RX_BUF_DISABLE,
|
|
I2C_MASTER_TX_BUF_DISABLE, 0));
|
|
|
|
TEST_ESP_OK(i2c_set_period(I2C_MASTER_NUM, I2C_SCL_HIGH_PERIOD_V, I2C_SCL_HIGH_PERIOD_V));
|
|
TEST_ESP_OK(i2c_get_period(I2C_MASTER_NUM, &high_period, &low_period));
|
|
TEST_ASSERT_EQUAL_INT(I2C_SCL_HIGH_PERIOD_V, high_period);
|
|
TEST_ASSERT_EQUAL_INT(I2C_SCL_HIGH_PERIOD_V, low_period);
|
|
|
|
TEST_ASSERT_NOT_NULL((void *)i2c_set_period(I2C_MASTER_NUM, I2C_SCL_HIGH_PERIOD_V + 1, I2C_SCL_HIGH_PERIOD_V + 1));
|
|
|
|
TEST_ESP_OK(i2c_set_period(I2C_MASTER_NUM, 300, 400));
|
|
TEST_ESP_OK(i2c_get_period(I2C_MASTER_NUM, &high_period, &low_period));
|
|
TEST_ASSERT_EQUAL_INT(300, high_period);
|
|
TEST_ASSERT_EQUAL_INT(400, low_period);
|
|
TEST_ESP_OK(i2c_driver_delete(I2C_MASTER_NUM));
|
|
}
|
|
|
|
TEST_CASE("I2C config FIFO test", "[i2c]")
|
|
{
|
|
TEST_ASSERT_BIT_LOW(1, I2C[I2C_SLAVE_NUM]->fifo_conf.tx_fifo_rst);
|
|
TEST_ESP_OK(i2c_reset_tx_fifo(I2C_SLAVE_NUM));
|
|
TEST_ASSERT_BIT_LOW(0, I2C[I2C_SLAVE_NUM]->fifo_conf.tx_fifo_rst);
|
|
|
|
TEST_ESP_OK(i2c_reset_rx_fifo(I2C_SLAVE_NUM));
|
|
TEST_ASSERT_BIT_LOW(0, I2C[I2C_SLAVE_NUM]->fifo_conf.rx_fifo_rst);
|
|
}
|
|
|
|
TEST_CASE("I2C timing test", "[i2c]")
|
|
{
|
|
int test_setup_time, test_data_time, test_stop_time, test_hold_time;
|
|
uint8_t *data_wr = (uint8_t *) malloc(DATA_LENGTH);
|
|
i2c_config_t conf_master = i2c_master_init();
|
|
TEST_ESP_OK(i2c_param_config(I2C_MASTER_NUM, &conf_master));
|
|
TEST_ESP_OK(i2c_driver_install(I2C_MASTER_NUM, I2C_MODE_MASTER,
|
|
I2C_MASTER_RX_BUF_DISABLE,
|
|
I2C_MASTER_TX_BUF_DISABLE, 0));
|
|
|
|
TEST_ESP_OK(i2c_set_start_timing(I2C_MASTER_NUM, 50, 60));
|
|
TEST_ESP_OK(i2c_set_data_timing(I2C_MASTER_NUM, 80, 60));
|
|
TEST_ESP_OK(i2c_set_stop_timing(I2C_MASTER_NUM, 100, 60));
|
|
|
|
for (int i = 0; i < DATA_LENGTH; i++) {
|
|
data_wr[i] = i;
|
|
}
|
|
i2c_master_write_slave(I2C_MASTER_NUM, data_wr, RW_TEST_LENGTH);
|
|
TEST_ESP_OK(i2c_get_start_timing(I2C_MASTER_NUM, &test_setup_time, &test_hold_time));
|
|
TEST_ESP_OK(i2c_get_data_timing(I2C_MASTER_NUM, &test_data_time, &test_hold_time));
|
|
TEST_ESP_OK(i2c_get_stop_timing(I2C_MASTER_NUM, &test_stop_time, &test_hold_time));
|
|
TEST_ASSERT_EQUAL_INT32(50, test_setup_time);
|
|
TEST_ASSERT_EQUAL_INT32(80, test_data_time);
|
|
TEST_ASSERT_EQUAL_INT32(100, test_stop_time);
|
|
TEST_ASSERT_EQUAL_INT32(60, test_hold_time);
|
|
free(data_wr);
|
|
i2c_driver_delete(I2C_MASTER_NUM);
|
|
}
|
|
|
|
|
|
TEST_CASE("I2C data mode test", "[i2c]")
|
|
{
|
|
uint8_t *data_wr = (uint8_t *) malloc(DATA_LENGTH);
|
|
i2c_trans_mode_t test_tx_trans_mode, test_rx_trans_mode;
|
|
i2c_config_t conf_master = i2c_master_init();
|
|
TEST_ESP_OK(i2c_param_config(I2C_MASTER_NUM, &conf_master));
|
|
TEST_ESP_OK(i2c_driver_install(I2C_MASTER_NUM, I2C_MODE_MASTER,
|
|
I2C_MASTER_RX_BUF_DISABLE,
|
|
I2C_MASTER_TX_BUF_DISABLE, 0));
|
|
for (int i = 0; i < DATA_LENGTH; i++) {
|
|
data_wr[i] = i;
|
|
}
|
|
i2c_master_write_slave(I2C_MASTER_NUM, data_wr, RW_TEST_LENGTH);
|
|
TEST_ESP_OK(i2c_set_data_mode(I2C_MASTER_NUM, I2C_DATA_MODE_LSB_FIRST, I2C_DATA_MODE_LSB_FIRST));
|
|
i2c_master_write_slave(I2C_MASTER_NUM, data_wr, RW_TEST_LENGTH);
|
|
TEST_ASSERT_EQUAL_INT(1, I2C[I2C_MASTER_NUM]->ctr.rx_lsb_first);
|
|
TEST_ASSERT_EQUAL_INT(1, I2C[I2C_MASTER_NUM]->ctr.tx_lsb_first);
|
|
|
|
TEST_ESP_OK(i2c_get_data_mode(I2C_MASTER_NUM, &test_tx_trans_mode, &test_rx_trans_mode));
|
|
TEST_ASSERT_EQUAL_INT(1, test_tx_trans_mode);
|
|
TEST_ASSERT_EQUAL_INT(1, test_rx_trans_mode);
|
|
free(data_wr);
|
|
i2c_driver_delete(I2C_MASTER_NUM);
|
|
}
|
|
|
|
|
|
TEST_CASE("I2C driver memory leaking check", "[i2c]")
|
|
{
|
|
esp_err_t ret;
|
|
i2c_config_t conf_slave = i2c_slave_init();
|
|
ret = i2c_param_config(I2C_SLAVE_NUM, &conf_slave);
|
|
TEST_ASSERT(ret == ESP_OK);
|
|
|
|
int size = esp_get_free_heap_size();
|
|
for (uint32_t i = 0; i <= 1000; i++) {
|
|
ret = i2c_driver_install(I2C_SLAVE_NUM, I2C_MODE_SLAVE,
|
|
I2C_SLAVE_RX_BUF_LEN,
|
|
I2C_SLAVE_TX_BUF_LEN, 0);
|
|
TEST_ASSERT(ret == ESP_OK);
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
i2c_driver_delete(I2C_SLAVE_NUM);
|
|
TEST_ASSERT(ret == ESP_OK);
|
|
}
|
|
|
|
TEST_ASSERT_INT_WITHIN(100, size, esp_get_free_heap_size());
|
|
}
|
|
|
|
static volatile bool exit_flag;
|
|
static bool test_read_func;
|
|
|
|
static void test_task(void *pvParameters)
|
|
{
|
|
xSemaphoreHandle *sema = (xSemaphoreHandle *) pvParameters;
|
|
|
|
uint8_t *data = (uint8_t *) malloc(DATA_LENGTH);
|
|
i2c_config_t conf_slave = i2c_slave_init();
|
|
TEST_ESP_OK(i2c_param_config( I2C_SLAVE_NUM, &conf_slave));
|
|
TEST_ESP_OK(i2c_driver_install(I2C_SLAVE_NUM, I2C_MODE_SLAVE,
|
|
I2C_SLAVE_RX_BUF_LEN,
|
|
I2C_SLAVE_TX_BUF_LEN, 0));
|
|
while (exit_flag == false) {
|
|
if (test_read_func) {
|
|
i2c_slave_read_buffer(I2C_SLAVE_NUM, data, DATA_LENGTH, 0);
|
|
} else {
|
|
i2c_slave_write_buffer(I2C_SLAVE_NUM, data, DATA_LENGTH, 0);
|
|
}
|
|
}
|
|
|
|
free(data);
|
|
xSemaphoreGive(*sema);
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
TEST_CASE("test i2c_slave_read_buffer is not blocked when ticks_to_wait=0", "[i2c]")
|
|
{
|
|
xSemaphoreHandle exit_sema = xSemaphoreCreateBinary();
|
|
exit_flag = false;
|
|
|
|
test_read_func = true;
|
|
xTaskCreate(test_task, "tsk1", 2048, &exit_sema, 5, NULL);
|
|
|
|
printf("Waiting for 5 sec\n");
|
|
vTaskDelay(5000 / portTICK_PERIOD_MS);
|
|
exit_flag = true;
|
|
if (xSemaphoreTake(exit_sema, 1000 / portTICK_PERIOD_MS) == pdTRUE) {
|
|
vSemaphoreDelete(exit_sema);
|
|
} else {
|
|
TEST_FAIL_MESSAGE("i2c_slave_read_buffer is blocked");
|
|
}
|
|
TEST_ESP_OK(i2c_driver_delete(I2C_SLAVE_NUM));
|
|
}
|
|
|
|
TEST_CASE("test i2c_slave_write_buffer is not blocked when ticks_to_wait=0", "[i2c]")
|
|
{
|
|
xSemaphoreHandle exit_sema = xSemaphoreCreateBinary();
|
|
exit_flag = false;
|
|
|
|
test_read_func = false;
|
|
xTaskCreate(test_task, "tsk1", 2048, &exit_sema, 5, NULL);
|
|
|
|
printf("Waiting for 5 sec\n");
|
|
vTaskDelay(5000 / portTICK_PERIOD_MS);
|
|
exit_flag = true;
|
|
if (xSemaphoreTake(exit_sema, 1000 / portTICK_PERIOD_MS) == pdTRUE) {
|
|
vSemaphoreDelete(exit_sema);
|
|
} else {
|
|
TEST_FAIL_MESSAGE("i2c_slave_write_buffer is blocked");
|
|
}
|
|
TEST_ESP_OK(i2c_driver_delete(I2C_SLAVE_NUM));
|
|
}
|