OVMS3-idf/components/esp32/Kconfig
Wu Jian Gang ed0a85ab4d Kconfig: use 4 spaces to instead 1 tab
In some Kconfig file, both 4 spaces and 1 tab are used mix, let's just
use 4 space, it will be clean in some editor.
2016-09-28 13:24:58 +08:00

143 lines
4.4 KiB
Text

menu "ESP32-specific config"
choice ESP32_DEFAULT_CPU_FREQ_MHZ
prompt "CPU frequency"
default ESP32_DEFAULT_CPU_FREQ_240
help
CPU frequency to be set on application startup.
config ESP32_DEFAULT_CPU_FREQ_80
bool "80 MHz"
config ESP32_DEFAULT_CPU_FREQ_160
bool "160 MHz"
config ESP32_DEFAULT_CPU_FREQ_240
bool "240 MHz"
endchoice
config ESP32_DEFAULT_CPU_FREQ_MHZ
int
default 80 if ESP32_DEFAULT_CPU_FREQ_80
default 160 if ESP32_DEFAULT_CPU_FREQ_160
default 240 if ESP32_DEFAULT_CPU_FREQ_240
choice ESP32_WIFI_OR_BT
prompt "Select stack to enable (WiFi or BT)"
default ESP32_ENABLE_WIFI
help
Temporarily, WiFi and BT stacks can not be used at the same time.
Select which stack to enable.
config ESP32_ENABLE_STACK_WIFI
bool "WiFi"
select WIFI_ENABLED if ESP32_ENABLE_STACK_WIFI
config ESP32_ENABLE_STACK_BT
bool "BT"
select MEMMAP_BT if ESP32_ENABLE_STACK_BT
select BT_ENABLED if ESP32_ENABLE_STACK_BT
config ESP32_ENABLE_STACK_NONE
bool "None"
endchoice
config MEMMAP_BT
bool
depends on ESP32_ENABLE_STACK_BT
help
The Bluetooth stack uses memory that cannot be used as generic memory anymore. This
reserves the space for that within the memory map of the compiled binary.
This option is required to enable BT stack.
Temporarily, this option is not compatible with WiFi stack.
config MEMMAP_SMP
bool "Reserve memory for two cores"
default "y"
help
The ESP32 contains two cores. If you plan to only use one, you can disable this item
to save some memory. (ToDo: Make this automatically depend on unicore support)
config MEMMAP_TRACEMEM
bool "Use TRAX tracing feature"
default "n"
help
The ESP32 contains a feature which allows you to trace the execution path the processor
has taken through the program. This is stored in a chunk of 32K (16K for single-processor)
of memory that can't be used for general purposes anymore. Disable this if you do not know
what this is.
# Memory to reverse for trace, used in linker script
config TRACEMEM_RESERVE_DRAM
hex
default 0x8000 if MEMMAP_TRACEMEM
default 0x0
config MEMMAP_SPISRAM
bool "Use external SPI SRAM chip as main memory"
default "n"
help
The ESP32 can control an external SPI SRAM chip, adding the memory it contains to the
main memory map. Enable this if you have this hardware and want to use it in the same
way as on-chip RAM.
config WIFI_ENABLED
bool
default "y"
depends on ESP32_ENABLE_STACK_WIFI
help
This compiles in the low-level WiFi stack.
Temporarily, this option is not compatible with BT stack.
config SYSTEM_EVENT_QUEUE_SIZE
int "System event queue size"
default 32
help
Config system event queue size in different application.
config SYSTEM_EVENT_TASK_STACK_SIZE
int "Event loop task stack size"
default 2048
help
Config system event task stack size in different application.
config MAIN_TASK_STACK_SIZE
int "Main task stack size"
default 4096
help
Config system event task stack size in different application.
config NEWLIB_STDOUT_ADDCR
bool "Standard-out output adds carriage return before newline"
default y
help
Most people are used to end their printf strings with a newline. If this
is sent as is to the serial port, most terminal programs will only move the
cursor one line down, not also move it to the beginning of the line. This
is usually done by an added CR character. Enabling this will make the
standard output code automatically add a CR character before a LF.
config ULP_COPROC_ENABLED
bool "Enable Ultra Low Power (ULP) Coprocessor"
default "n"
help
Set to 'y' if you plan to load a firmware for the coprocessor.
If this option is enabled, further coprocessor configuration will appear in the Components menu.
config ULP_COPROC_RESERVE_MEM
int "RTC slow memory reserved for coprocessor"
default 512
range 32 8192
depends on ULP_COPROC_ENABLED
help
Bytes of memory to reserve for ULP coprocessor firmware & data.
Data is reserved at the beginning of RTC slow memory.
# Set CONFIG_ULP_COPROC_RESERVE_MEM to 0 if ULP is disabled
config ULP_COPROC_RESERVE_MEM
int
default 0
depends on !ULP_COPROC_ENABLED
endmenu