* Use "example" in all example function & variable names, ie use i2c_example_xxx instead of i2c_xxx for example functions. Closes #198 https://github.com/espressif/esp-idf/issues/198 * Mark example functions, etc. static * Replace uses of "test" & "demo" with "example" * Split the UART example into two * Rename "main" example files to end with "_main.c" for disambiguation
136 lines
4.9 KiB
C
136 lines
4.9 KiB
C
/* Uart Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include <stdlib.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "esp_system.h"
|
|
#include "nvs_flash.h"
|
|
#include "driver/uart.h"
|
|
#include "freertos/queue.h"
|
|
#include "esp_log.h"
|
|
#include "soc/uart_struct.h"
|
|
|
|
static const char *TAG = "uart_events";
|
|
|
|
/**
|
|
* This example shows how to use the UART driver to handle special UART events.
|
|
*
|
|
* It also reads data from UART0 directly, and echoes it to console.
|
|
*
|
|
* - port: UART0
|
|
* - rx buffer: on
|
|
* - tx buffer: on
|
|
* - flow control: off
|
|
* - event queue: on
|
|
* - pin assignment: txd(default), rxd(default)
|
|
*/
|
|
|
|
#define EX_UART_NUM UART_NUM_0
|
|
|
|
#define BUF_SIZE (1024)
|
|
static QueueHandle_t uart0_queue;
|
|
|
|
static void uart_event_task(void *pvParameters)
|
|
{
|
|
uart_event_t event;
|
|
size_t buffered_size;
|
|
uint8_t* dtmp = (uint8_t*) malloc(BUF_SIZE);
|
|
for(;;) {
|
|
//Waiting for UART event.
|
|
if(xQueueReceive(uart0_queue, (void * )&event, (portTickType)portMAX_DELAY)) {
|
|
ESP_LOGI(TAG, "uart[%d] event:", EX_UART_NUM);
|
|
switch(event.type) {
|
|
//Event of UART receving data
|
|
/*We'd better handler data event fast, there would be much more data events than
|
|
other types of events. If we take too much time on data event, the queue might
|
|
be full.
|
|
in this example, we don't process data in event, but read data outside.*/
|
|
case UART_DATA:
|
|
uart_get_buffered_data_len(EX_UART_NUM, &buffered_size);
|
|
ESP_LOGI(TAG, "data, len: %d; buffered len: %d", event.size, buffered_size);
|
|
break;
|
|
//Event of HW FIFO overflow detected
|
|
case UART_FIFO_OVF:
|
|
ESP_LOGI(TAG, "hw fifo overflow\n");
|
|
//If fifo overflow happened, you should consider adding flow control for your application.
|
|
//We can read data out out the buffer, or directly flush the rx buffer.
|
|
uart_flush(EX_UART_NUM);
|
|
break;
|
|
//Event of UART ring buffer full
|
|
case UART_BUFFER_FULL:
|
|
ESP_LOGI(TAG, "ring buffer full\n");
|
|
//If buffer full happened, you should consider encreasing your buffer size
|
|
//We can read data out out the buffer, or directly flush the rx buffer.
|
|
uart_flush(EX_UART_NUM);
|
|
break;
|
|
//Event of UART RX break detected
|
|
case UART_BREAK:
|
|
ESP_LOGI(TAG, "uart rx break\n");
|
|
break;
|
|
//Event of UART parity check error
|
|
case UART_PARITY_ERR:
|
|
ESP_LOGI(TAG, "uart parity error\n");
|
|
break;
|
|
//Event of UART frame error
|
|
case UART_FRAME_ERR:
|
|
ESP_LOGI(TAG, "uart frame error\n");
|
|
break;
|
|
//UART_PATTERN_DET
|
|
case UART_PATTERN_DET:
|
|
ESP_LOGI(TAG, "uart pattern detected\n");
|
|
break;
|
|
//Others
|
|
default:
|
|
ESP_LOGI(TAG, "uart event type: %d\n", event.type);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
free(dtmp);
|
|
dtmp = NULL;
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
/* Configure the UART events example */
|
|
void app_main()
|
|
{
|
|
uart_config_t uart_config = {
|
|
.baud_rate = 115200,
|
|
.data_bits = UART_DATA_8_BITS,
|
|
.parity = UART_PARITY_DISABLE,
|
|
.stop_bits = UART_STOP_BITS_1,
|
|
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
|
.rx_flow_ctrl_thresh = 122,
|
|
};
|
|
//Set UART parameters
|
|
uart_param_config(EX_UART_NUM, &uart_config);
|
|
//Set UART log level
|
|
esp_log_level_set(TAG, ESP_LOG_INFO);
|
|
//Install UART driver, and get the queue.
|
|
uart_driver_install(EX_UART_NUM, BUF_SIZE * 2, BUF_SIZE * 2, 10, &uart0_queue, 0);
|
|
|
|
//Set UART pins (using UART0 default pins ie no changes.)
|
|
uart_set_pin(EX_UART_NUM, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
|
|
|
|
//Set uart pattern detect function.
|
|
uart_enable_pattern_det_intr(EX_UART_NUM, '+', 3, 10000, 10, 10);
|
|
//Create a task to handler UART event from ISR
|
|
xTaskCreate(uart_event_task, "uart_event_task", 2048, NULL, 12, NULL);
|
|
//process data
|
|
uint8_t* data = (uint8_t*) malloc(BUF_SIZE);
|
|
do {
|
|
int len = uart_read_bytes(EX_UART_NUM, data, BUF_SIZE, 100 / portTICK_RATE_MS);
|
|
if(len > 0) {
|
|
ESP_LOGI(TAG, "uart read : %d", len);
|
|
uart_write_bytes(EX_UART_NUM, (const char*)data, len);
|
|
}
|
|
} while(1);
|
|
}
|