OVMS3-idf/examples/peripherals/rmt_tx/main/rmt_tx_main.c
2017-11-22 23:33:29 +01:00

95 lines
2.7 KiB
C

/* RMT transmit example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_log.h"
#include "driver/rmt.h"
static const char *RMT_TX_TAG = "RMT Tx";
#define RMT_TX_CHANNEL RMT_CHANNEL_0
#define RMT_TX_GPIO 18
/*
* Prepare a raw table with a message in the Morse code
*
* The message is "ESP" : . ... .--.
*
* The table structure represents the RMT item structure:
* {duration, level, duration, level}
*
*/
rmt_item32_t items[] = {
// E : dot
{{{ 32767, 1, 32767, 0 }}}, // dot
//
{{{ 32767, 0, 32767, 0 }}}, // SPACE
// S : dot, dot, dot
{{{ 32767, 1, 32767, 0 }}}, // dot
{{{ 32767, 1, 32767, 0 }}}, // dot
{{{ 32767, 1, 32767, 0 }}}, // dot
//
{{{ 32767, 0, 32767, 0 }}}, // SPACE
// P : dot, dash, dash, dot
{{{ 32767, 1, 32767, 0 }}}, // dot
{{{ 32767, 1, 32767, 1 }}},
{{{ 32767, 1, 32767, 0 }}}, // dash
{{{ 32767, 1, 32767, 1 }}},
{{{ 32767, 1, 32767, 0 }}}, // dash
{{{ 32767, 1, 32767, 0 }}}, // dot
// RMT end marker
{{{ 0, 1, 0, 0 }}}
};
/*
* Initialize the RMT Tx channel
*/
static void rmt_tx_int()
{
rmt_config_t config;
config.rmt_mode = RMT_MODE_TX;
config.channel = RMT_TX_CHANNEL;
config.gpio_num = RMT_TX_GPIO;
config.mem_block_num = 1;
config.tx_config.loop_en = 0;
// enable the carrier to be able to hear the Morse sound
// if the RMT_TX_GPIO is connected to a speaker
config.tx_config.carrier_en = 1;
config.tx_config.idle_output_en = 1;
config.tx_config.idle_level = 0;
config.tx_config.carrier_duty_percent = 50;
// set audible career frequency of 611 Hz
// actually 611 Hz is the minimum, that can be set
// with current implementation of the RMT API
config.tx_config.carrier_freq_hz = 611;
config.tx_config.carrier_level = 1;
// set the maximum clock divider to be able to output
// RMT pulses in range of about one hundred milliseconds
config.clk_div = 255;
ESP_ERROR_CHECK(rmt_config(&config));
ESP_ERROR_CHECK(rmt_driver_install(config.channel, 0, 0));
}
void app_main(void *ignore)
{
ESP_LOGI(RMT_TX_TAG, "Configuring transmitter");
rmt_tx_int();
int number_of_items = sizeof(items) / sizeof(items[0]);
while (1) {
ESP_ERROR_CHECK(rmt_write_items(RMT_TX_CHANNEL, items, number_of_items, true));
ESP_LOGI(RMT_TX_TAG, "Transmission complete");
vTaskDelay(2000 / portTICK_PERIOD_MS);
}
vTaskDelete(NULL);
}