Crash_Override/OVMS3-idf
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
OVMS3-idf/components/bt/bluedroid/bta/include/bta_api.h
Tian Hao 4fd437d466 component/bt : support remove bonded device 
1. add feature of remove bonded devices.
2. fix SMP key size bug
3. fix privacy bug
4. fix gatt set value bug
5. add gatt security client demo
6. change gatt server/gatt client demo
2017-09-22 20:19:02 +08:00

2434 lines
102 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright (C) 2003-2014 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This is the public interface file for BTA, Broadcom's Bluetooth
* application layer for mobile phones.
*
******************************************************************************/
#ifndef BTA_API_H
#define BTA_API_H
#include "bt_target.h"
#include "bt_types.h"
#include "btm_api.h"
// #include "uipc_msg.h"
#include "sdp_api.h"
#if BLE_INCLUDED == TRUE
#include "btm_ble_api.h"
#endif
/*****************************************************************************
** Constants and data types
*****************************************************************************/
/* Status Return Value */
#define BTA_SUCCESS 0 /* Successful operation. */
#define BTA_FAILURE 1 /* Generic failure. */
#define BTA_PENDING 2 /* API cannot be completed right now */
#define BTA_BUSY 3
#define BTA_NO_RESOURCES 4
#define BTA_WRONG_MODE 5
typedef UINT8 tBTA_STATUS;
/*
* Service ID
*
* NOTES: When you add a new Service ID for BTA AND require to change the value of BTA_MAX_SERVICE_ID,
* make sure that the correct security ID of the new service from Security service definitions (btm_api.h)
* should be added to bta_service_id_to_btm_srv_id_lkup_tbl table in bta_dm_act.c.
*/
#define BTA_RES_SERVICE_ID 0 /* Reserved */
#define BTA_SPP_SERVICE_ID 1 /* Serial port profile. */
#define BTA_DUN_SERVICE_ID 2 /* Dial-up networking profile. */
#define BTA_A2DP_SOURCE_SERVICE_ID 3 /* A2DP Source profile. */
#define BTA_LAP_SERVICE_ID 4 /* LAN access profile. */
#define BTA_HSP_SERVICE_ID 5 /* Headset profile. */
#define BTA_HFP_SERVICE_ID 6 /* Hands-free profile. */
#define BTA_OPP_SERVICE_ID 7 /* Object push */
#define BTA_FTP_SERVICE_ID 8 /* File transfer */
#define BTA_CTP_SERVICE_ID 9 /* Cordless Terminal */
#define BTA_ICP_SERVICE_ID 10 /* Intercom Terminal */
#define BTA_SYNC_SERVICE_ID 11 /* Synchronization */
#define BTA_BPP_SERVICE_ID 12 /* Basic printing profile */
#define BTA_BIP_SERVICE_ID 13 /* Basic Imaging profile */
#define BTA_PANU_SERVICE_ID 14 /* PAN User */
#define BTA_NAP_SERVICE_ID 15 /* PAN Network access point */
#define BTA_GN_SERVICE_ID 16 /* PAN Group Ad-hoc networks */
#define BTA_SAP_SERVICE_ID 17 /* SIM Access profile */
#define BTA_A2DP_SINK_SERVICE_ID 18 /* A2DP Sink */
#define BTA_AVRCP_SERVICE_ID 19 /* A/V remote control */
#define BTA_HID_SERVICE_ID 20 /* HID */
#define BTA_VDP_SERVICE_ID 21 /* Video distribution */
#define BTA_PBAP_SERVICE_ID 22 /* PhoneBook Access Server*/
#define BTA_HSP_HS_SERVICE_ID 23 /* HFP HS role */
#define BTA_HFP_HS_SERVICE_ID 24 /* HSP HS role */
#define BTA_MAP_SERVICE_ID 25 /* Message Access Profile */
#define BTA_MN_SERVICE_ID 26 /* Message Notification Service */
#define BTA_HDP_SERVICE_ID 27 /* Health Device Profile */
#define BTA_PCE_SERVICE_ID 28 /* PhoneBook Access Client*/
#define BTA_SDP_SERVICE_ID 29 /* SDP Search*/
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
/* BLE profile service ID */
#define BTA_BLE_SERVICE_ID 30 /* GATT profile */
// btla-specific ++
#define BTA_USER_SERVICE_ID 31 /* User requested UUID */
#define BTA_MAX_SERVICE_ID 32
// btla-specific --
#else
#define BTA_USER_SERVICE_ID 30 /* User requested UUID */
#define BTA_MAX_SERVICE_ID 31
#endif
/* service IDs (BTM_SEC_SERVICE_FIRST_EMPTY + 1) to (BTM_SEC_MAX_SERVICES - 1)
* are used by BTA JV */
#define BTA_FIRST_JV_SERVICE_ID (BTM_SEC_SERVICE_FIRST_EMPTY + 1)
#define BTA_LAST_JV_SERVICE_ID (BTM_SEC_MAX_SERVICES - 1)
typedef UINT8 tBTA_SERVICE_ID;
/* Service ID Mask */
#define BTA_RES_SERVICE_MASK 0x00000001 /* Reserved */
#define BTA_SPP_SERVICE_MASK 0x00000002 /* Serial port profile. */
#define BTA_DUN_SERVICE_MASK 0x00000004 /* Dial-up networking profile. */
#define BTA_FAX_SERVICE_MASK 0x00000008 /* Fax profile. */
#define BTA_LAP_SERVICE_MASK 0x00000010 /* LAN access profile. */
#define BTA_HSP_SERVICE_MASK 0x00000020 /* HSP AG role. */
#define BTA_HFP_SERVICE_MASK 0x00000040 /* HFP AG role */
#define BTA_OPP_SERVICE_MASK 0x00000080 /* Object push */
#define BTA_FTP_SERVICE_MASK 0x00000100 /* File transfer */
#define BTA_CTP_SERVICE_MASK 0x00000200 /* Cordless Terminal */
#define BTA_ICP_SERVICE_MASK 0x00000400 /* Intercom Terminal */
#define BTA_SYNC_SERVICE_MASK 0x00000800 /* Synchronization */
#define BTA_BPP_SERVICE_MASK 0x00001000 /* Print server */
#define BTA_BIP_SERVICE_MASK 0x00002000 /* Basic Imaging */
#define BTA_PANU_SERVICE_MASK 0x00004000 /* PAN User */
#define BTA_NAP_SERVICE_MASK 0x00008000 /* PAN Network access point */
#define BTA_GN_SERVICE_MASK 0x00010000 /* PAN Group Ad-hoc networks */
#define BTA_SAP_SERVICE_MASK 0x00020000 /* PAN Group Ad-hoc networks */
#define BTA_A2DP_SERVICE_MASK 0x00040000 /* Advanced audio distribution */
#define BTA_AVRCP_SERVICE_MASK 0x00080000 /* A/V remote control */
#define BTA_HID_SERVICE_MASK 0x00100000 /* HID */
#define BTA_VDP_SERVICE_MASK 0x00200000 /* Video distribution */
#define BTA_PBAP_SERVICE_MASK 0x00400000 /* Phone Book Server */
#define BTA_HSP_HS_SERVICE_MASK 0x00800000 /* HFP HS role */
#define BTA_HFP_HS_SERVICE_MASK 0x01000000 /* HSP HS role */
#define BTA_MAS_SERVICE_MASK 0x02000000 /* Message Access Profile */
#define BTA_MN_SERVICE_MASK 0x04000000 /* Message Notification Profile */
#define BTA_HL_SERVICE_MASK 0x08000000 /* Health Device Profile */
#define BTA_PCE_SERVICE_MASK 0x10000000 /* Phone Book Client */
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
#define BTA_BLE_SERVICE_MASK 0x20000000 /* GATT based service */
// btla-specific ++
#define BTA_USER_SERVICE_MASK 0x40000000 /* Message Notification Profile */
// btla-specific --
#else
// btla-specific ++
#define BTA_USER_SERVICE_MASK 0x20000000 /* Message Notification Profile */
// btla-specific --
#endif
#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
#define BTA_ALL_SERVICE_MASK 0x3FFFFFFF /* All services supported by BTA. */
#else
#define BTA_ALL_SERVICE_MASK 0x1FFFFFFF /* All services supported by BTA. */
#endif
typedef UINT32 tBTA_SERVICE_MASK;
/* extended service mask, including mask with one or more GATT UUID */
typedef struct {
tBTA_SERVICE_MASK srvc_mask;
UINT8 num_uuid;
tBT_UUID *p_uuid;
} tBTA_SERVICE_MASK_EXT;
/* Security Setting Mask */
#define BTA_SEC_NONE BTM_SEC_NONE /* No security. */
#define BTA_SEC_AUTHORIZE (BTM_SEC_IN_AUTHORIZE ) /* Authorization required (only needed for out going connection )*/
#define BTA_SEC_AUTHENTICATE (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_OUT_AUTHENTICATE) /* Authentication required. */
#define BTA_SEC_ENCRYPT (BTM_SEC_IN_ENCRYPT | BTM_SEC_OUT_ENCRYPT) /* Encryption required. */
#define BTA_SEC_MODE4_LEVEL4 (BTM_SEC_MODE4_LEVEL4) /* Mode 4 level 4 service, i.e. incoming/outgoing MITM and P-256 encryption */
#define BTA_SEC_MITM (BTM_SEC_IN_MITM | BTM_SEC_OUT_MITM) /* Man-In-The_Middle protection */
#define BTA_SEC_IN_16_DIGITS (BTM_SEC_IN_MIN_16_DIGIT_PIN) /* Min 16 digit for pin code */
typedef UINT16 tBTA_SEC;
/* Ignore for Discoverable, Connectable, Pairable and Connectable Paired only device modes */
#define BTA_DM_IGNORE 0x00FF
/* Ignore for Discoverable, Connectable only for LE modes */
#define BTA_DM_LE_IGNORE 0xFF00
#define BTA_APP_ID_PAN_MULTI 0xFE /* app id for pan multiple connection */
#define BTA_ALL_APP_ID 0xFF
/* Discoverable Modes */
#define BTA_DM_NON_DISC BTM_NON_DISCOVERABLE /* Device is not discoverable. */
#define BTA_DM_GENERAL_DISC BTM_GENERAL_DISCOVERABLE /* General discoverable. */
#define BTA_DM_LIMITED_DISC BTM_LIMITED_DISCOVERABLE /* Limited discoverable. */
#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
#define BTA_DM_BLE_NON_DISCOVERABLE BTM_BLE_NON_DISCOVERABLE /* Device is not LE discoverable */
#define BTA_DM_BLE_GENERAL_DISCOVERABLE BTM_BLE_GENERAL_DISCOVERABLE /* Device is LE General discoverable */
#define BTA_DM_BLE_LIMITED_DISCOVERABLE BTM_BLE_LIMITED_DISCOVERABLE /* Device is LE Limited discoverable */
#endif
typedef UINT16 tBTA_DM_DISC; /* this discoverability mode is a bit mask among BR mode and LE mode */
/* Connectable Modes */
#define BTA_DM_NON_CONN BTM_NON_CONNECTABLE /* Device is not connectable. */
#define BTA_DM_CONN BTM_CONNECTABLE /* Device is connectable. */
#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
#define BTA_DM_BLE_NON_CONNECTABLE BTM_BLE_NON_CONNECTABLE /* Device is LE non-connectable. */
#define BTA_DM_BLE_CONNECTABLE BTM_BLE_CONNECTABLE /* Device is LE connectable. */
#endif
// btla-specific ++
typedef UINT16 tBTA_DM_CONN;
#define BTA_TRANSPORT_UNKNOWN 0
#define BTA_TRANSPORT_BR_EDR BT_TRANSPORT_BR_EDR
#define BTA_TRANSPORT_LE BT_TRANSPORT_LE
typedef tBT_TRANSPORT tBTA_TRANSPORT;
/* Pairable Modes */
#define BTA_DM_PAIRABLE 1
#define BTA_DM_NON_PAIRABLE 0
/* Connectable Paired Only Mode */
#define BTA_DM_CONN_ALL 0
#define BTA_DM_CONN_PAIRED 1
/* Inquiry Modes */
#define BTA_DM_INQUIRY_NONE BTM_INQUIRY_NONE /*No BR inquiry. */
#define BTA_DM_GENERAL_INQUIRY BTM_GENERAL_INQUIRY /* Perform general inquiry. */
#define BTA_DM_LIMITED_INQUIRY BTM_LIMITED_INQUIRY /* Perform limited inquiry. */
#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
#define BTA_BLE_INQUIRY_NONE BTM_BLE_INQUIRY_NONE
#define BTA_BLE_GENERAL_INQUIRY BTM_BLE_GENERAL_INQUIRY /* Perform LE general inquiry. */
#define BTA_BLE_LIMITED_INQUIRY BTM_BLE_LIMITED_INQUIRY /* Perform LE limited inquiry. */
#endif
typedef UINT8 tBTA_DM_INQ_MODE;
/* Inquiry Filter Type */
#define BTA_DM_INQ_CLR BTM_CLR_INQUIRY_FILTER /* Clear inquiry filter. */
#define BTA_DM_INQ_DEV_CLASS BTM_FILTER_COND_DEVICE_CLASS /* Filter on device class. */
#define BTA_DM_INQ_BD_ADDR BTM_FILTER_COND_BD_ADDR /* Filter on a specific BD address. */
typedef UINT8 tBTA_DM_INQ_FILT;
/* Authorize Response */
#define BTA_DM_AUTH_PERM 0 /* Authorized for future connections to the service */
#define BTA_DM_AUTH_TEMP 1 /* Authorized for current connection only */
#define BTA_DM_NOT_AUTH 2 /* Not authorized for the service */
typedef UINT8 tBTA_AUTH_RESP;
/* M/S preferred roles */
#define BTA_ANY_ROLE 0x00
#define BTA_MASTER_ROLE_PREF 0x01
#define BTA_MASTER_ROLE_ONLY 0x02
#define BTA_SLAVE_ROLE_ONLY 0x03 /* Used for PANU only, skip role switch to master */
typedef UINT8 tBTA_PREF_ROLES;
enum {
BTA_DM_NO_SCATTERNET, /* Device doesn't support scatternet, it might
support "role switch during connection" for
an incoming connection, when it already has
another connection in master role */
BTA_DM_PARTIAL_SCATTERNET, /* Device supports partial scatternet. It can have
simulateous connection in Master and Slave roles
for short period of time */
BTA_DM_FULL_SCATTERNET /* Device can have simultaneous connection in master
and slave roles */
};
/* Inquiry filter device class condition */
typedef struct {
DEV_CLASS dev_class; /* device class of interest */
DEV_CLASS dev_class_mask; /* mask to determine the bits of device class of interest */
} tBTA_DM_COD_COND;
/* Inquiry Filter Condition */
typedef union {
BD_ADDR bd_addr; /* BD address of device to filter. */
tBTA_DM_COD_COND dev_class_cond; /* Device class filter condition */
} tBTA_DM_INQ_COND;
/* Inquiry Parameters */
typedef struct {
tBTA_DM_INQ_MODE mode; /* Inquiry mode, limited or general. */
UINT8 duration; /* Inquiry duration in 1.28 sec units. */
UINT8 max_resps; /* Maximum inquiry responses. Set to zero for unlimited responses. */
BOOLEAN report_dup; /* report duplicated inquiry response with higher RSSI value */
tBTA_DM_INQ_FILT filter_type; /* Filter condition type. */
tBTA_DM_INQ_COND filter_cond; /* Filter condition data. */
#if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE)
UINT8 intl_duration[4];/*duration array storing the interleave scan's time portions*/
#endif
} tBTA_DM_INQ;
typedef struct {
UINT8 bta_dm_eir_min_name_len; /* minimum length of local name when it is shortened */
#if (BTA_EIR_CANNED_UUID_LIST == TRUE)
UINT8 bta_dm_eir_uuid16_len; /* length of 16-bit UUIDs */
UINT8 *bta_dm_eir_uuid16; /* 16-bit UUIDs */
#else
UINT32 uuid_mask[BTM_EIR_SERVICE_ARRAY_SIZE]; /* mask of UUID list in EIR */
#endif
INT8 *bta_dm_eir_inq_tx_power; /* Inquiry TX power */
UINT8 bta_dm_eir_flag_len; /* length of flags in bytes */
UINT8 *bta_dm_eir_flags; /* flags for EIR */
UINT8 bta_dm_eir_manufac_spec_len; /* length of manufacturer specific in bytes */
UINT8 *bta_dm_eir_manufac_spec; /* manufacturer specific */
UINT8 bta_dm_eir_additional_len; /* length of additional data in bytes */
UINT8 *bta_dm_eir_additional; /* additional data */
} tBTA_DM_EIR_CONF;
#if BLE_INCLUDED == TRUE
/* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */
#define BTA_BLE_LIMIT_DISC_FLAG BTM_BLE_LIMIT_DISC_FLAG
#define BTA_BLE_GEN_DISC_FLAG BTM_BLE_GEN_DISC_FLAG
#define BTA_BLE_BREDR_NOT_SPT BTM_BLE_BREDR_NOT_SPT
#define BTA_BLE_DMT_CONTROLLER_SPT BTM_BLE_DMT_CONTROLLER_SPT
#define BTA_BLE_DMT_HOST_SPT BTM_BLE_DMT_HOST_SPT
#define BTA_BLE_NON_LIMIT_DISC_FLAG BTM_BLE_NON_LIMIT_DISC_FLAG
#define BTA_BLE_ADV_FLAG_MASK BTM_BLE_ADV_FLAG_MASK
#define BTA_BLE_LIMIT_DISC_MASK BTM_BLE_LIMIT_DISC_MASK
/* ADV data bit mask */
#define BTA_BLE_AD_BIT_DEV_NAME BTM_BLE_AD_BIT_DEV_NAME
#define BTA_BLE_AD_BIT_FLAGS BTM_BLE_AD_BIT_FLAGS
#define BTA_BLE_AD_BIT_MANU BTM_BLE_AD_BIT_MANU
#define BTA_BLE_AD_BIT_TX_PWR BTM_BLE_AD_BIT_TX_PWR
#define BTA_BLE_AD_BIT_INT_RANGE BTM_BLE_AD_BIT_INT_RANGE
#define BTA_BLE_AD_BIT_SERVICE BTM_BLE_AD_BIT_SERVICE
#define BTA_BLE_AD_BIT_APPEARANCE BTM_BLE_AD_BIT_APPEARANCE
#define BTA_BLE_AD_BIT_PROPRIETARY BTM_BLE_AD_BIT_PROPRIETARY
#define BTA_DM_BLE_AD_BIT_SERVICE_SOL BTM_BLE_AD_BIT_SERVICE_SOL
#define BTA_DM_BLE_AD_BIT_SERVICE_DATA BTM_BLE_AD_BIT_SERVICE_DATA
#define BTA_DM_BLE_AD_BIT_SIGN_DATA BTM_BLE_AD_BIT_SIGN_DATA
#define BTA_DM_BLE_AD_BIT_SERVICE_128SOL BTM_BLE_AD_BIT_SERVICE_128SOL
#define BTA_DM_BLE_AD_BIT_PUBLIC_ADDR BTM_BLE_AD_BIT_PUBLIC_ADDR
#define BTA_DM_BLE_AD_BIT_RANDOM_ADDR BTM_BLE_AD_BIT_RANDOM_ADDR
#define BTA_DM_BLE_AD_BIT_SERVICE_128 BTM_BLE_AD_BIT_SERVICE_128 /*128-bit Service UUIDs*/
typedef tBTM_BLE_AD_MASK tBTA_BLE_AD_MASK;
/* slave preferred connection interval range */
typedef struct {
UINT16 low;
UINT16 hi;
} tBTA_BLE_INT_RANGE;
/* Service tag supported in the device */
typedef struct {
UINT8 num_service;
BOOLEAN list_cmpl;
UINT16 *p_uuid;
} tBTA_BLE_SERVICE;
typedef struct {
UINT8 len;
UINT8 *p_val;
} tBTA_BLE_MANU;
typedef struct {
UINT8 adv_type;
UINT8 len;
UINT8 *p_val; /* number of len byte */
} tBTA_BLE_PROP_ELEM;
/* vendor proprietary adv type */
typedef struct {
UINT8 num_elem;
tBTA_BLE_PROP_ELEM *p_elem;
} tBTA_BLE_PROPRIETARY;
typedef struct {
tBT_UUID service_uuid;
UINT8 len;
UINT8 *p_val;
} tBTA_BLE_SERVICE_DATA;
typedef tBTM_BLE_128SERVICE tBTA_BLE_128SERVICE;
typedef tBTM_BLE_32SERVICE tBTA_BLE_32SERVICE;
typedef struct {
tBTA_BLE_INT_RANGE int_range; /* slave prefered conn interval range */
tBTA_BLE_MANU *p_manu; /* manufacturer data */
tBTA_BLE_SERVICE *p_services; /* 16 bits services */
tBTA_BLE_128SERVICE *p_services_128b; /* 128 bits service */
tBTA_BLE_32SERVICE *p_service_32b; /* 32 bits Service UUID */
tBTA_BLE_SERVICE *p_sol_services; /* 16 bits services Solicitation UUIDs */
tBTA_BLE_32SERVICE *p_sol_service_32b; /* List of 32 bit Service Solicitation UUIDs */
tBTA_BLE_128SERVICE *p_sol_service_128b;/* List of 128 bit Service Solicitation UUIDs */
tBTA_BLE_PROPRIETARY *p_proprietary; /* proprietary data */
tBTA_BLE_SERVICE_DATA *p_service_data; /* service data */
UINT16 appearance; /* appearance data */
UINT8 flag;
UINT8 tx_power;
} tBTA_BLE_ADV_DATA;
typedef void (tBTA_SET_ADV_DATA_CMPL_CBACK) (tBTA_STATUS status);
typedef void (tBTA_START_ADV_CMPL_CBACK) (tBTA_STATUS status);
typedef tBTM_SET_PKT_DATA_LENGTH_CBACK tBTA_SET_PKT_DATA_LENGTH_CBACK;
typedef tBTM_SET_LOCAL_PRIVACY_CBACK tBTA_SET_LOCAL_PRIVACY_CBACK;
/* advertising channel map */
#define BTA_BLE_ADV_CHNL_37 BTM_BLE_ADV_CHNL_37
#define BTA_BLE_ADV_CHNL_38 BTM_BLE_ADV_CHNL_38
#define BTA_BLE_ADV_CHNL_39 BTM_BLE_ADV_CHNL_39
typedef tBTM_BLE_ADV_CHNL_MAP tBTA_BLE_ADV_CHNL_MAP; /* use as a bit mask */
/* advertising filter policy */
typedef tBTM_BLE_AFP tBTA_BLE_AFP;
/* adv event type */
#define BTA_BLE_CONNECT_EVT BTM_BLE_CONNECT_EVT /* Connectable undirected advertising */
#define BTA_BLE_CONNECT_DIR_EVT BTM_BLE_CONNECT_DIR_EVT /* Connectable directed advertising */
#define BTA_BLE_DISCOVER_EVT BTM_BLE_DISCOVER_EVT /* Scannable undirected advertising */
#define BTA_BLE_NON_CONNECT_EVT BTM_BLE_NON_CONNECT_EVT /* Non connectable undirected advertising */
typedef UINT8 tBTA_BLE_ADV_EVT;
/* adv tx power level */
#define BTA_BLE_ADV_TX_POWER_MIN 0 /* minimum tx power */
#define BTA_BLE_ADV_TX_POWER_LOW 1 /* low tx power */
#define BTA_BLE_ADV_TX_POWER_MID 2 /* middle tx power */
#define BTA_BLE_ADV_TX_POWER_UPPER 3 /* upper tx power */
#define BTA_BLE_ADV_TX_POWER_MAX 4 /* maximum tx power */
typedef UINT8 tBTA_BLE_ADV_TX_POWER;
/* advertising instance parameters */
typedef struct {
UINT16 adv_int_min; /* minimum adv interval */
UINT16 adv_int_max; /* maximum adv interval */
tBTA_BLE_ADV_EVT adv_type; /* adv event type */
tBTA_BLE_ADV_CHNL_MAP channel_map; /* adv channel map */
tBTA_BLE_AFP adv_filter_policy; /* advertising filter policy */
tBTA_BLE_ADV_TX_POWER tx_power; /* adv tx power */
} tBTA_BLE_ADV_PARAMS;
/* These are the fields returned in each device adv packet. It
** is returned in the results callback if registered.
*/
typedef struct {
UINT8 conn_mode;
tBTA_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */
UINT8 flag;
UINT8 tx_power_level;
UINT8 remote_name_len;
UINT8 *p_remote_name;
tBTA_BLE_SERVICE service;
} tBTA_BLE_INQ_DATA;
enum {
BTA_BLE_BATCH_SCAN_MODE_PASS = 1,
BTA_BLE_BATCH_SCAN_MODE_ACTI = 2,
BTA_BLE_BATCH_SCAN_MODE_PASS_ACTI = 3
};
typedef UINT8 tBTA_BLE_BATCH_SCAN_MODE;
enum {
BTA_BLE_DISCARD_OLD_ITEMS = 0,
BTA_BLE_DISCARD_LOWER_RSSI_ITEMS = 1
};
typedef UINT8 tBTA_BLE_DISCARD_RULE;
enum {
BTA_BLE_ADV_SEEN_FIRST_TIME = 0,
BTA_BLE_ADV_TRACKING_TIMEOUT = 1
};
typedef UINT8 tBTA_BLE_ADV_CHANGE_REASON;
enum {
BTA_BLE_BATCH_SCAN_ENB_EVT = 1,
BTA_BLE_BATCH_SCAN_CFG_STRG_EVT = 2,
BTA_BLE_BATCH_SCAN_DATA_EVT = 3,
BTA_BLE_BATCH_SCAN_THRES_EVT = 4,
BTA_BLE_BATCH_SCAN_PARAM_EVT = 5,
BTA_BLE_BATCH_SCAN_DIS_EVT = 6
};
typedef tBTM_BLE_BATCH_SCAN_EVT tBTA_BLE_BATCH_SCAN_EVT;
typedef tBTM_BLE_TRACK_ADV_ACTION tBTA_BLE_TRACK_ADV_ACTION;
#endif
/* BLE customer specific feature function type definitions */
/* data type used on customer specific feature for RSSI monitoring */
#define BTA_BLE_RSSI_ALERT_HI 0
#define BTA_BLE_RSSI_ALERT_RANGE 1
#define BTA_BLE_RSSI_ALERT_LO 2
typedef UINT8 tBTA_DM_BLE_RSSI_ALERT_TYPE;
#define BTA_BLE_RSSI_ALERT_NONE BTM_BLE_RSSI_ALERT_NONE /* (0) */
#define BTA_BLE_RSSI_ALERT_HI_BIT BTM_BLE_RSSI_ALERT_HI_BIT /* (1) */
#define BTA_BLE_RSSI_ALERT_RANGE_BIT BTM_BLE_RSSI_ALERT_RANGE_BIT /* (1 << 1) */
#define BTA_BLE_RSSI_ALERT_LO_BIT BTM_BLE_RSSI_ALERT_LO_BIT /* (1 << 2) */
typedef UINT8 tBTA_DM_BLE_RSSI_ALERT_MASK;
typedef void (tBTA_DM_BLE_RSSI_CBACK) (BD_ADDR bd_addr, tBTA_DM_BLE_RSSI_ALERT_TYPE alert_type, INT8 rssi);
/* max number of filter spot for different filter type */
#define BTA_DM_BLE_MAX_UUID_FILTER BTM_BLE_MAX_UUID_FILTER /* 8 */
#define BTA_DM_BLE_MAX_ADDR_FILTER BTM_BLE_MAX_ADDR_FILTER /* 8 */
#define BTA_DM_BLE_PF_STR_COND_MAX BTM_BLE_PF_STR_COND_MAX /* 4 apply to manu data , or local name */
#define BTA_DM_BLE_PF_STR_LEN_MAX BTM_BLE_PF_STR_LEN_MAX /* match for first 20 bytes */
#define BTA_DM_BLE_PF_LOGIC_OR 0
#define BTA_DM_BLE_PF_LOGIC_AND 1
typedef UINT8 tBTA_DM_BLE_PF_LOGIC_TYPE;
enum {
BTA_DM_BLE_SCAN_COND_ADD,
BTA_DM_BLE_SCAN_COND_DELETE,
BTA_DM_BLE_SCAN_COND_CLEAR = 2
};
typedef UINT8 tBTA_DM_BLE_SCAN_COND_OP;
/* ADV payload filtering vendor specific call event */
enum {
BTA_BLE_SCAN_PF_ENABLE_EVT = 7,
BTA_BLE_SCAN_PF_COND_EVT
};
/* filter selection bit index */
#define BTA_DM_BLE_PF_ADDR_FILTER BTM_BLE_PF_ADDR_FILTER
#define BTA_DM_BLE_PF_SRVC_DATA BTM_BLE_PF_SRVC_DATA
#define BTA_DM_BLE_PF_SRVC_UUID BTM_BLE_PF_SRVC_UUID
#define BTA_DM_BLE_PF_SRVC_SOL_UUID BTM_BLE_PF_SRVC_SOL_UUID
#define BTA_DM_BLE_PF_LOCAL_NAME BTM_BLE_PF_LOCAL_NAME
#define BTA_DM_BLE_PF_MANU_DATA BTM_BLE_PF_MANU_DATA
#define BTA_DM_BLE_PF_SRVC_DATA_PATTERN BTM_BLE_PF_SRVC_DATA_PATTERN
#define BTA_DM_BLE_PF_TYPE_ALL BTM_BLE_PF_TYPE_ALL
#define BTA_DM_BLE_PF_TYPE_MAX BTM_BLE_PF_TYPE_MAX
typedef UINT8 tBTA_DM_BLE_PF_COND_TYPE;
typedef union {
UINT16 uuid16_mask;
UINT32 uuid32_mask;
UINT8 uuid128_mask[LEN_UUID_128];
} tBTA_DM_BLE_PF_COND_MASK;
typedef struct {
tBLE_BD_ADDR *p_target_addr; /* target address, if NULL, generic UUID filter */
tBT_UUID uuid; /* UUID condition */
tBTA_DM_BLE_PF_LOGIC_TYPE cond_logic; /* AND/OR */
tBTA_DM_BLE_PF_COND_MASK *p_uuid_mask; /* UUID condition mask, if NULL, match exact as UUID condition */
} tBTA_DM_BLE_PF_UUID_COND;
typedef struct {
UINT8 data_len; /* <= 20 bytes */
UINT8 *p_data;
} tBTA_DM_BLE_PF_LOCAL_NAME_COND;
typedef struct {
UINT16 company_id; /* company ID */
UINT8 data_len; /* <= 20 bytes */
UINT8 *p_pattern;
UINT16 company_id_mask; /* UUID value mask */
UINT8 *p_pattern_mask; /* Manufacturer data matching mask, same length
as data pattern, set to all 0xff, match exact data */
} tBTA_DM_BLE_PF_MANU_COND;
typedef struct {
UINT16 uuid; /* service ID */
UINT8 data_len; /* <= 20 bytes */
UINT8 *p_pattern;
UINT8 *p_pattern_mask; /* Service data matching mask, same length
as data pattern, set to all 0xff, match exact data */
} tBTA_DM_BLE_PF_SRVC_PATTERN_COND;
typedef union {
tBLE_BD_ADDR target_addr;
tBTA_DM_BLE_PF_LOCAL_NAME_COND local_name; /* lcoal name filtering */
tBTA_DM_BLE_PF_MANU_COND manu_data; /* manufactuer data filtering */
tBTA_DM_BLE_PF_UUID_COND srvc_uuid; /* service UUID filtering */
tBTA_DM_BLE_PF_UUID_COND solicitate_uuid; /* solicitated service UUID filtering */
tBTA_DM_BLE_PF_SRVC_PATTERN_COND srvc_data; /* service data pattern */
} tBTA_DM_BLE_PF_COND_PARAM;
typedef UINT8 tBTA_DM_BLE_PF_FILT_INDEX;
typedef UINT8 tBTA_DM_BLE_PF_AVBL_SPACE;
typedef INT8 tBTA_DM_RSSI_VALUE;
typedef UINT8 tBTA_DM_LINK_QUALITY_VALUE;
typedef UINT8 tBTA_SIG_STRENGTH_MASK;
/* Security Callback Events */
#define BTA_DM_ENABLE_EVT 0 /* Enable Event */
#define BTA_DM_DISABLE_EVT 1 /* Disable Event */
#define BTA_DM_PIN_REQ_EVT 2 /* PIN request. */
#define BTA_DM_AUTH_CMPL_EVT 3 /* Authentication complete indication. */
#define BTA_DM_AUTHORIZE_EVT 4 /* Authorization request. */
#define BTA_DM_LINK_UP_EVT 5 /* Connection UP event */
#define BTA_DM_LINK_DOWN_EVT 6 /* Connection DOWN event */
#define BTA_DM_SIG_STRENGTH_EVT 7 /* Signal strength for bluetooth connection */
#define BTA_DM_BUSY_LEVEL_EVT 8 /* System busy level */
#define BTA_DM_BOND_CANCEL_CMPL_EVT 9 /* Bond cancel complete indication */
#define BTA_DM_SP_CFM_REQ_EVT 10 /* Simple Pairing User Confirmation request. */
#define BTA_DM_SP_KEY_NOTIF_EVT 11 /* Simple Pairing Passkey Notification */
#define BTA_DM_SP_RMT_OOB_EVT 12 /* Simple Pairing Remote OOB Data request. */
#define BTA_DM_SP_KEYPRESS_EVT 13 /* Key press notification event. */
#define BTA_DM_ROLE_CHG_EVT 14 /* Role Change event. */
#define BTA_DM_BLE_KEY_EVT 15 /* BLE SMP key event for peer device keys */
#define BTA_DM_BLE_SEC_REQ_EVT 16 /* BLE SMP security request */
#define BTA_DM_BLE_PASSKEY_NOTIF_EVT 17 /* SMP passkey notification event */
#define BTA_DM_BLE_PASSKEY_REQ_EVT 18 /* SMP passkey request event */
#define BTA_DM_BLE_OOB_REQ_EVT 19 /* SMP OOB request event */
#define BTA_DM_BLE_LOCAL_IR_EVT 20 /* BLE local IR event */
#define BTA_DM_BLE_LOCAL_ER_EVT 21 /* BLE local ER event */
#define BTA_DM_BLE_NC_REQ_EVT 22 /* SMP Numeric Comparison request event */
// btla-specific ++
#define BTA_DM_SP_RMT_OOB_EXT_EVT 23 /* Simple Pairing Remote OOB Extended Data request. */
#define BTA_DM_BLE_AUTH_CMPL_EVT 24 /* BLE Auth complete */
// btla-specific --
#define BTA_DM_DEV_UNPAIRED_EVT 25
#define BTA_DM_HW_ERROR_EVT 26 /* BT Chip H/W error */
#define BTA_DM_LE_FEATURES_READ 27 /* Cotroller specific LE features are read */
#define BTA_DM_ENER_INFO_READ 28 /* Energy info read */
typedef UINT8 tBTA_DM_SEC_EVT;
/* Structure associated with BTA_DM_ENABLE_EVT */
typedef struct {
tBTA_STATUS status;
} tBTA_DM_ENABLE;
/* Structure associated with BTA_DM_PIN_REQ_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */
BD_ADDR bd_addr; /* BD address peer device. */
DEV_CLASS dev_class; /* Class of Device */
BD_NAME bd_name; /* Name of peer device. */
BOOLEAN min_16_digit; /* TRUE if the pin returned must be at least 16 digits */
} tBTA_DM_PIN_REQ;
/* BLE related definition */
#if (SMP_INCLUDED == TRUE)
#define BTA_DM_AUTH_FAIL_BASE (HCI_ERR_MAX_ERR + 10)
#define BTA_DM_AUTH_CONVERT_SMP_CODE(x) (BTA_DM_AUTH_FAIL_BASE + (x))
#define BTA_DM_AUTH_SMP_PASSKEY_FAIL BTA_DM_AUTH_CONVERT_SMP_CODE (SMP_PASSKEY_ENTRY_FAIL)
#define BTA_DM_AUTH_SMP_OOB_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_OOB_FAIL)
#define BTA_DM_AUTH_SMP_PAIR_AUTH_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_AUTH_FAIL)
#define BTA_DM_AUTH_SMP_CONFIRM_VALUE_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_VALUE_ERR)
#define BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_NOT_SUPPORT)
#define BTA_DM_AUTH_SMP_ENC_KEY_SIZE (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_KEY_SIZE)
#define BTA_DM_AUTH_SMP_INVALID_CMD (BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_CMD)
#define BTA_DM_AUTH_SMP_UNKNOWN_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_FAIL_UNKNOWN)
#define BTA_DM_AUTH_SMP_REPEATED_ATTEMPT (BTA_DM_AUTH_FAIL_BASE + SMP_REPEATED_ATTEMPTS)
#define BTA_DM_AUTH_SMP_INVALID_PARAMETERS (BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_PARAMETERS)
#define BTA_DM_AUTH_SMP_INTERNAL_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_INTERNAL_ERR)
#define BTA_DM_AUTH_SMP_UNKNOWN_IO (BTA_DM_AUTH_FAIL_BASE + SMP_UNKNOWN_IO_CAP)
#define BTA_DM_AUTH_SMP_INIT_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_INIT_FAIL)
#define BTA_DM_AUTH_SMP_CONFIRM_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_FAIL)
#define BTA_DM_AUTH_SMP_BUSY (BTA_DM_AUTH_FAIL_BASE + SMP_BUSY)
#define BTA_DM_AUTH_SMP_ENC_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_FAIL)
#define BTA_DM_AUTH_SMP_RSP_TIMEOUT (BTA_DM_AUTH_FAIL_BASE + SMP_RSP_TIMEOUT)
#endif ///SMP_INCLUDED == TRUE
/* connection parameter boundary value and dummy value */
#define BTA_DM_BLE_SCAN_INT_MIN BTM_BLE_SCAN_INT_MIN
#define BTA_DM_BLE_SCAN_INT_MAX BTM_BLE_SCAN_INT_MAX
#define BTA_DM_BLE_SCAN_WIN_MIN BTM_BLE_SCAN_WIN_MIN
#define BTA_DM_BLE_SCAN_WIN_MAX BTM_BLE_SCAN_WIN_MAX
#define BTA_DM_BLE_CONN_INT_MIN BTM_BLE_CONN_INT_MIN
#define BTA_DM_BLE_CONN_INT_MAX BTM_BLE_CONN_INT_MAX
#define BTA_DM_BLE_CONN_LATENCY_MAX BTM_BLE_CONN_LATENCY_MAX
#define BTA_DM_BLE_CONN_SUP_TOUT_MIN BTM_BLE_CONN_SUP_TOUT_MIN
#define BTA_DM_BLE_CONN_SUP_TOUT_MAX BTM_BLE_CONN_SUP_TOUT_MAX
#define BTA_DM_BLE_CONN_PARAM_UNDEF BTM_BLE_CONN_PARAM_UNDEF /* use this value when a specific value not to be overwritten */
#if (SMP_INCLUDED == TRUE)
#define BTA_LE_KEY_PENC BTM_LE_KEY_PENC /* encryption information of peer device */
#define BTA_LE_KEY_PID BTM_LE_KEY_PID /* identity key of the peer device */
#define BTA_LE_KEY_PCSRK BTM_LE_KEY_PCSRK /* peer SRK */
#define BTA_LE_KEY_LENC BTM_LE_KEY_LENC /* master role security information:div */
#define BTA_LE_KEY_LID BTM_LE_KEY_LID /* master device ID key */
#define BTA_LE_KEY_LCSRK BTM_LE_KEY_LCSRK /* local CSRK has been deliver to peer */
#endif ///SMP_INCLUDED == TRUE
typedef UINT8 tBTA_LE_KEY_TYPE; /* can be used as a bit mask */
typedef tBTM_LE_PENC_KEYS tBTA_LE_PENC_KEYS ;
typedef tBTM_LE_PCSRK_KEYS tBTA_LE_PCSRK_KEYS;
typedef tBTM_LE_LENC_KEYS tBTA_LE_LENC_KEYS ;
typedef tBTM_LE_LCSRK_KEYS tBTA_LE_LCSRK_KEYS ;
typedef tBTM_LE_PID_KEYS tBTA_LE_PID_KEYS ;
typedef union {
tBTA_LE_PENC_KEYS penc_key; /* received peer encryption key */
tBTA_LE_PCSRK_KEYS psrk_key; /* received peer device SRK */
tBTA_LE_PID_KEYS pid_key; /* peer device ID key */
tBTA_LE_LENC_KEYS lenc_key; /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/
tBTA_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/
tBTA_LE_PID_KEYS lid_key; /* local device ID key for the particular remote */
} tBTA_LE_KEY_VALUE;
#define BTA_BLE_LOCAL_KEY_TYPE_ID 1
#define BTA_BLE_LOCAL_KEY_TYPE_ER 2
typedef UINT8 tBTA_DM_BLE_LOCAL_KEY_MASK;
typedef struct {
BT_OCTET16 ir;
BT_OCTET16 irk;
BT_OCTET16 dhk;
} tBTA_BLE_LOCAL_ID_KEYS;
#if (SMP_INCLUDED == TRUE)
#define BTA_DM_SEC_GRANTED BTA_SUCCESS
#define BTA_DM_SEC_PAIR_NOT_SPT BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT
#define BTA_DM_SEC_REP_ATTEMPTS BTA_DM_AUTH_SMP_REPEATED_ATTEMPT
#endif ///SMP_INCLUDED == TRUE
typedef UINT8 tBTA_DM_BLE_SEC_GRANT;
#define BTA_DM_BLE_ONN_NONE BTM_BLE_CONN_NONE
#define BTA_DM_BLE_CONN_AUTO BTM_BLE_CONN_AUTO
#define BTA_DM_BLE_CONN_SELECTIVE BTM_BLE_CONN_SELECTIVE
typedef UINT8 tBTA_DM_BLE_CONN_TYPE;
typedef BOOLEAN (tBTA_DM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name);
typedef tBTM_LE_UPDATE_CONN_PRAMS tBTA_LE_UPDATE_CONN_PRAMS;
typedef tBTM_UPDATE_CONN_PARAM_CBACK tBTA_UPDATE_CONN_PARAM_CBACK;
/* Structure associated with BTA_DM_BLE_SEC_REQ_EVT */
typedef struct {
BD_ADDR bd_addr; /* peer address */
BD_NAME bd_name; /* peer device name */
} tBTA_DM_BLE_SEC_REQ;
typedef struct {
BD_ADDR bd_addr; /* peer address */
tBTM_LE_KEY_TYPE key_type;
tBTM_LE_KEY_VALUE *p_key_value;
} tBTA_DM_BLE_KEY;
/* Structure associated with BTA_DM_AUTH_CMPL_EVT */
typedef struct {
BD_ADDR bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
BOOLEAN key_present; /* Valid link key value in key element */
LINK_KEY key; /* Link key associated with peer device. */
UINT8 key_type; /* The type of Link Key */
BOOLEAN success; /* TRUE of authentication succeeded, FALSE if failed. */
UINT8 fail_reason; /* The HCI reason/error code for when success=FALSE */
tBLE_ADDR_TYPE addr_type; /* Peer device address type */
tBT_DEVICE_TYPE dev_type;
} tBTA_DM_AUTH_CMPL;
/* Structure associated with BTA_DM_AUTHORIZE_EVT */
typedef struct {
BD_ADDR bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
tBTA_SERVICE_ID service; /* Service ID to authorize. */
// btla-specific ++
DEV_CLASS dev_class;
// btla-specific --
} tBTA_DM_AUTHORIZE;
/* Structure associated with BTA_DM_LINK_UP_EVT */
typedef struct {
BD_ADDR bd_addr; /* BD address peer device. */
#if BLE_INCLUDED == TRUE
tBTA_TRANSPORT link_type;
#endif
} tBTA_DM_LINK_UP;
/* Structure associated with BTA_DM_LINK_DOWN_EVT */
typedef struct {
BD_ADDR bd_addr; /* BD address peer device. */
UINT8 status; /* connection open/closed */
BOOLEAN is_removed; /* TRUE if device is removed when link is down */
#if BLE_INCLUDED == TRUE
tBTA_TRANSPORT link_type;
#endif
} tBTA_DM_LINK_DOWN;
/* Structure associated with BTA_DM_ROLE_CHG_EVT */
typedef struct {
BD_ADDR bd_addr; /* BD address peer device. */
UINT8 new_role; /* the new connection role */
} tBTA_DM_ROLE_CHG;
/* Structure associated with BTA_DM_BUSY_LEVEL_EVT */
typedef struct {
UINT8 level; /* when paging or inquiring, level is 10.
Otherwise, the number of ACL links */
UINT8 level_flags; /* indicates individual flags */
} tBTA_DM_BUSY_LEVEL;
#define BTA_IO_CAP_OUT BTM_IO_CAP_OUT /* 0 DisplayOnly */
#define BTA_IO_CAP_IO BTM_IO_CAP_IO /* 1 DisplayYesNo */
#define BTA_IO_CAP_IN BTM_IO_CAP_IN /* 2 KeyboardOnly */
#define BTA_IO_CAP_NONE BTM_IO_CAP_NONE /* 3 NoInputNoOutput */
#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
#define BTA_IO_CAP_KBDISP BTM_IO_CAP_KBDISP /* 4 Keyboard display */
#endif
typedef tBTM_IO_CAP tBTA_IO_CAP;
#define BTA_AUTH_SP_NO BTM_AUTH_SP_NO /* 0 MITM Protection Not Required - Single Profile/non-bonding
Numeric comparison with automatic accept allowed */
#define BTA_AUTH_SP_YES BTM_AUTH_SP_YES /* 1 MITM Protection Required - Single Profile/non-bonding
Use IO Capabilities to determine authentication procedure */
#define BTA_AUTH_AP_NO BTM_AUTH_AP_NO /* 2 MITM Protection Not Required - All Profiles/dedicated bonding
Numeric comparison with automatic accept allowed */
#define BTA_AUTH_AP_YES BTM_AUTH_AP_YES /* 3 MITM Protection Required - All Profiles/dedicated bonding
Use IO Capabilities to determine authentication procedure */
#define BTA_AUTH_SPGB_NO BTM_AUTH_SPGB_NO /* 4 MITM Protection Not Required - Single Profiles/general bonding
Numeric comparison with automatic accept allowed */
#define BTA_AUTH_SPGB_YES BTM_AUTH_SPGB_YES /* 5 MITM Protection Required - Single Profiles/general bonding
Use IO Capabilities to determine authentication procedure */
typedef tBTM_AUTH_REQ tBTA_AUTH_REQ;
#define BTA_AUTH_DD_BOND BTM_AUTH_DD_BOND /* 2 this bit is set for dedicated bonding */
#define BTA_AUTH_GEN_BOND BTM_AUTH_SPGB_NO /* 4 this bit is set for general bonding */
#define BTA_AUTH_BONDS BTM_AUTH_BONDS /* 6 the general/dedicated bonding bits */
#if (SMP_INCLUDED == TRUE)
#define BTA_LE_AUTH_NO_BOND BTM_LE_AUTH_REQ_NO_BOND /* 0*/
#define BTA_LE_AUTH_BOND BTM_LE_AUTH_REQ_BOND /* 1 << 0 */
#define BTA_LE_AUTH_REQ_MITM BTM_LE_AUTH_REQ_MITM /* 1 << 2 */
#define BTA_LE_AUTH_REQ_SC_ONLY BTM_LE_AUTH_REQ_SC_ONLY /* 1 << 3 */
#define BTA_LE_AUTH_REQ_SC_BOND BTM_LE_AUTH_REQ_SC_BOND /* 1001 */
#define BTA_LE_AUTH_REQ_SC_MITM BTM_LE_AUTH_REQ_SC_MITM /* 1100 */
#define BTA_LE_AUTH_REQ_SC_MITM_BOND BTM_LE_AUTH_REQ_SC_MITM_BOND /* 1101 */
#endif ///SMP_INCLUDED == TRUE
typedef tBTM_LE_AUTH_REQ tBTA_LE_AUTH_REQ; /* combination of the above bit pattern */
#define BTA_OOB_NONE BTM_OOB_NONE
#define BTA_OOB_PRESENT BTM_OOB_PRESENT
#if BTM_OOB_INCLUDED == TRUE
#define BTA_OOB_UNKNOWN BTM_OOB_UNKNOWN
#endif
typedef tBTM_OOB_DATA tBTA_OOB_DATA;
/* Structure associated with BTA_DM_SP_CFM_REQ_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */
BD_ADDR bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
UINT32 num_val; /* the numeric value for comparison. If just_works, do not show this number to UI */
BOOLEAN just_works; /* TRUE, if "Just Works" association model */
tBTA_AUTH_REQ loc_auth_req; /* Authentication required for local device */
tBTA_AUTH_REQ rmt_auth_req; /* Authentication required for peer device */
tBTA_IO_CAP loc_io_caps; /* IO Capabilities of local device */
tBTA_AUTH_REQ rmt_io_caps; /* IO Capabilities of remote device */
} tBTA_DM_SP_CFM_REQ;
enum {
BTA_SP_KEY_STARTED, /* passkey entry started */
BTA_SP_KEY_ENTERED, /* passkey digit entered */
BTA_SP_KEY_ERASED, /* passkey digit erased */
BTA_SP_KEY_CLEARED, /* passkey cleared */
BTA_SP_KEY_COMPLT /* passkey entry completed */
};
typedef UINT8 tBTA_SP_KEY_TYPE;
/* Structure associated with BTA_DM_SP_KEYPRESS_EVT */
typedef struct {
BD_ADDR bd_addr; /* peer address */
tBTA_SP_KEY_TYPE notif_type;
} tBTA_DM_SP_KEY_PRESS;
/* Structure associated with BTA_DM_SP_KEY_NOTIF_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */
BD_ADDR bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
UINT32 passkey; /* the numeric value for comparison. If just_works, do not show this number to UI */
} tBTA_DM_SP_KEY_NOTIF;
/* Structure associated with BTA_DM_SP_RMT_OOB_EVT */
typedef struct {
/* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */
BD_ADDR bd_addr; /* peer address */
DEV_CLASS dev_class; /* peer CoD */
BD_NAME bd_name; /* peer device name */
} tBTA_DM_SP_RMT_OOB;
/* Structure associated with BTA_DM_BOND_CANCEL_CMPL_EVT */
typedef struct {
tBTA_STATUS result; /* TRUE of bond cancel succeeded, FALSE if failed. */
} tBTA_DM_BOND_CANCEL_CMPL;
/* Union of all security callback structures */
typedef union {
tBTA_DM_ENABLE enable; /* BTA enabled */
tBTA_DM_PIN_REQ pin_req; /* PIN request. */
tBTA_DM_AUTH_CMPL auth_cmpl; /* Authentication complete indication. */
tBTA_DM_AUTHORIZE authorize; /* Authorization request. */
tBTA_DM_LINK_UP link_up; /* ACL connection down event */
tBTA_DM_LINK_DOWN link_down; /* ACL connection down event */
tBTA_DM_BUSY_LEVEL busy_level; /* System busy level */
tBTA_DM_SP_CFM_REQ cfm_req; /* user confirm request */
tBTA_DM_SP_KEY_NOTIF key_notif; /* passkey notification */
tBTA_DM_SP_RMT_OOB rmt_oob; /* remote oob */
tBTA_DM_BOND_CANCEL_CMPL bond_cancel_cmpl; /* Bond Cancel Complete indication */
tBTA_DM_SP_KEY_PRESS key_press; /* key press notification event */
tBTA_DM_ROLE_CHG role_chg; /* role change event */
tBTA_DM_BLE_SEC_REQ ble_req; /* BLE SMP related request */
tBTA_DM_BLE_KEY ble_key; /* BLE SMP keys used when pairing */
tBTA_BLE_LOCAL_ID_KEYS ble_id_keys; /* IR event */
BT_OCTET16 ble_er; /* ER event data */
} tBTA_DM_SEC;
/* Security callback */
typedef void (tBTA_DM_SEC_CBACK)(tBTA_DM_SEC_EVT event, tBTA_DM_SEC *p_data);
#define BTA_BLE_MULTI_ADV_ILLEGAL 0
/* multi adv callback event */
#define BTA_BLE_MULTI_ADV_ENB_EVT 1
#define BTA_BLE_MULTI_ADV_DISABLE_EVT 2
#define BTA_BLE_MULTI_ADV_PARAM_EVT 3
#define BTA_BLE_MULTI_ADV_DATA_EVT 4
typedef UINT8 tBTA_BLE_MULTI_ADV_EVT;
/* multi adv callback */
typedef void (tBTA_BLE_MULTI_ADV_CBACK)(tBTA_BLE_MULTI_ADV_EVT event,
UINT8 inst_id, void *p_ref, tBTA_STATUS status);
typedef UINT32 tBTA_DM_BLE_REF_VALUE;
#define BTA_DM_BLE_PF_ENABLE_EVT BTM_BLE_PF_ENABLE
#define BTA_DM_BLE_PF_CONFIG_EVT BTM_BLE_PF_CONFIG
typedef UINT8 tBTA_DM_BLE_PF_EVT;
#define BTA_DM_BLE_PF_ENABLE 1
#define BTA_DM_BLE_PF_CONFIG 2
typedef UINT8 tBTA_DM_BLE_PF_ACTION;
/* Config callback */
typedef void (tBTA_DM_BLE_PF_CFG_CBACK) (tBTA_DM_BLE_PF_ACTION action,
tBTA_DM_BLE_PF_COND_TYPE cfg_cond,
tBTA_DM_BLE_PF_AVBL_SPACE avbl_space, tBTA_STATUS status,
tBTA_DM_BLE_REF_VALUE ref_value);
/* Param callback */
typedef void (tBTA_DM_BLE_PF_PARAM_CBACK) (UINT8 action_type, tBTA_DM_BLE_PF_AVBL_SPACE avbl_space,
tBTA_DM_BLE_REF_VALUE ref_value, tBTA_STATUS status);
/* Status callback */
typedef void (tBTA_DM_BLE_PF_STATUS_CBACK) (UINT8 action, tBTA_STATUS status,
tBTA_DM_BLE_REF_VALUE ref_value);
#define BTA_DM_BLE_PF_BRDCAST_ADDR_FILT 1
#define BTA_DM_BLE_PF_SERV_DATA_CHG_FILT 2
#define BTA_DM_BLE_PF_SERV_UUID 4
#define BTA_DM_BLE_PF_SERV_SOLC_UUID 8
#define BTA_DM_BLE_PF_LOC_NAME_CHECK 16
#define BTA_DM_BLE_PF_MANUF_NAME_CHECK 32
#define BTA_DM_BLE_PF_SERV_DATA_CHECK 64
typedef UINT16 tBTA_DM_BLE_PF_FEAT_SEL;
#define BTA_DM_BLE_PF_LIST_LOGIC_OR 1
#define BTA_DM_BLE_PF_LIST_LOGIC_AND 2
typedef UINT16 tBTA_DM_BLE_PF_LIST_LOGIC_TYPE;
#define BTA_DM_BLE_PF_FILT_LOGIC_OR 0
#define BTA_DM_BLE_PF_FILT_LOGIC_AND 1
typedef UINT16 tBTA_DM_BLE_PF_FILT_LOGIC_TYPE;
typedef UINT8 tBTA_DM_BLE_PF_RSSI_THRESHOLD;
typedef UINT8 tBTA_DM_BLE_PF_DELIVERY_MODE;
typedef UINT16 tBTA_DM_BLE_PF_TIMEOUT;
typedef UINT8 tBTA_DM_BLE_PF_TIMEOUT_CNT;
typedef UINT16 tBTA_DM_BLE_PF_ADV_TRACK_ENTRIES;
typedef struct {
tBTA_DM_BLE_PF_FEAT_SEL feat_seln;
tBTA_DM_BLE_PF_LIST_LOGIC_TYPE list_logic_type;
tBTA_DM_BLE_PF_FILT_LOGIC_TYPE filt_logic_type;
tBTA_DM_BLE_PF_RSSI_THRESHOLD rssi_high_thres;
tBTA_DM_BLE_PF_RSSI_THRESHOLD rssi_low_thres;
tBTA_DM_BLE_PF_DELIVERY_MODE dely_mode;
tBTA_DM_BLE_PF_TIMEOUT found_timeout;
tBTA_DM_BLE_PF_TIMEOUT lost_timeout;
tBTA_DM_BLE_PF_TIMEOUT_CNT found_timeout_cnt;
tBTA_DM_BLE_PF_ADV_TRACK_ENTRIES num_of_tracking_entries;
} tBTA_DM_BLE_PF_FILT_PARAMS;
/* Search callback events */
#define BTA_DM_INQ_RES_EVT 0 /* Inquiry result for a peer device. */
#define BTA_DM_INQ_CMPL_EVT 1 /* Inquiry complete. */
#define BTA_DM_DISC_RES_EVT 2 /* Discovery result for a peer device. */
#define BTA_DM_DISC_BLE_RES_EVT 3 /* Discovery result for BLE GATT based servoce on a peer device. */
#define BTA_DM_DISC_CMPL_EVT 4 /* Discovery complete. */
#define BTA_DM_DI_DISC_CMPL_EVT 5 /* Discovery complete. */
#define BTA_DM_SEARCH_CANCEL_CMPL_EVT 6 /* Search cancelled */
typedef UINT8 tBTA_DM_SEARCH_EVT;
#define BTA_DM_INQ_RES_IGNORE_RSSI BTM_INQ_RES_IGNORE_RSSI /* 0x7f RSSI value not supplied (ignore it) */
/* Structure associated with BTA_DM_INQ_RES_EVT */
typedef struct {
BD_ADDR bd_addr; /* BD address peer device. */
DEV_CLASS dev_class; /* Device class of peer device. */
BOOLEAN remt_name_not_required; /* Application sets this flag if it already knows the name of the device */
/* If the device name is known to application BTA skips the remote name request */
BOOLEAN is_limited; /* TRUE, if the limited inquiry bit is set in the CoD */
INT8 rssi; /* The rssi value */
UINT8 *p_eir; /* received EIR */
#if (BLE_INCLUDED == TRUE)
UINT8 inq_result_type;
UINT8 ble_addr_type;
tBTM_BLE_EVT_TYPE ble_evt_type;
tBT_DEVICE_TYPE device_type;
UINT8 flag;
UINT8 adv_data_len;
UINT8 scan_rsp_len;
#endif
} tBTA_DM_INQ_RES;
/* Structure associated with BTA_DM_INQ_CMPL_EVT */
typedef struct {
UINT8 num_resps; /* Number of inquiry responses. */
} tBTA_DM_INQ_CMPL;
/* Structure associated with BTA_DM_DI_DISC_CMPL_EVT */
typedef struct {
BD_ADDR bd_addr; /* BD address peer device. */
UINT8 num_record; /* Number of DI record */
tBTA_STATUS result;
} tBTA_DM_DI_DISC_CMPL;
/* Structure associated with BTA_DM_DISC_RES_EVT */
typedef struct {
BD_ADDR bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
tBTA_SERVICE_MASK services; /* Services found on peer device. */
// btla-specific ++
UINT8 *p_raw_data; /* Raw data for discovery DB */
UINT32 raw_data_size; /* size of raw data */
tBT_DEVICE_TYPE device_type; /* device type in case it is BLE device */
UINT32 num_uuids;
UINT8 *p_uuid_list;
// btla-specific --
tBTA_STATUS result;
} tBTA_DM_DISC_RES;
/* Structure associated with tBTA_DM_DISC_BLE_RES */
typedef struct {
BD_ADDR bd_addr; /* BD address peer device. */
BD_NAME bd_name; /* Name of peer device. */
tBT_UUID service; /* GATT based Services UUID found on peer device. */
} tBTA_DM_DISC_BLE_RES;
/* Union of all search callback structures */
typedef union {
tBTA_DM_INQ_RES inq_res; /* Inquiry result for a peer device. */
tBTA_DM_INQ_CMPL inq_cmpl; /* Inquiry complete. */
tBTA_DM_DISC_RES disc_res; /* Discovery result for a peer device. */
tBTA_DM_DISC_BLE_RES disc_ble_res; /* discovery result for GATT based service */
tBTA_DM_DI_DISC_CMPL di_disc; /* DI discovery result for a peer device */
} tBTA_DM_SEARCH;
/* Search callback */
typedef void (tBTA_DM_SEARCH_CBACK)(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data);
/* Execute call back */
typedef void (tBTA_DM_EXEC_CBACK) (void *p_param);
/* Encryption callback*/
typedef void (tBTA_DM_ENCRYPT_CBACK) (BD_ADDR bd_addr, tBTA_TRANSPORT transport, tBTA_STATUS result);
/* relate to ESP_BLE_SEC_xxx in esp_gatt_defs.h */
#if BLE_INCLUDED == TRUE
#define BTA_DM_BLE_SEC_NONE BTM_BLE_SEC_NONE
#define BTA_DM_BLE_SEC_ENCRYPT BTM_BLE_SEC_ENCRYPT
#define BTA_DM_BLE_SEC_NO_MITM BTM_BLE_SEC_ENCRYPT_NO_MITM
#define BTA_DM_BLE_SEC_MITM BTM_BLE_SEC_ENCRYPT_MITM
typedef tBTM_BLE_SEC_ACT tBTA_DM_BLE_SEC_ACT;
typedef tBTM_BLE_TX_TIME_MS tBTA_DM_BLE_TX_TIME_MS;
typedef tBTM_BLE_RX_TIME_MS tBTA_DM_BLE_RX_TIME_MS;
typedef tBTM_BLE_IDLE_TIME_MS tBTA_DM_BLE_IDLE_TIME_MS;
typedef tBTM_BLE_ENERGY_USED tBTA_DM_BLE_ENERGY_USED;
#define BTA_DM_CONTRL_UNKNOWN 0 /* Unknown state */
#define BTA_DM_CONTRL_ACTIVE 1 /* ACL link on, SCO link ongoing, sniff mode */
#define BTA_DM_CONTRL_SCAN 2 /* Scan state - paging/inquiry/trying to connect*/
#define BTA_DM_CONTRL_IDLE 3 /* Idle state - page scan, LE advt, inquiry scan */
typedef UINT8 tBTA_DM_CONTRL_STATE;
typedef UINT8 tBTA_DM_BLE_ADV_STATE;
typedef UINT8 tBTA_DM_BLE_ADV_INFO_PRESENT;
typedef UINT8 tBTA_DM_BLE_RSSI_VALUE;
typedef UINT16 tBTA_DM_BLE_ADV_INFO_TIMESTAMP;
typedef tBTM_BLE_TRACK_ADV_DATA tBTA_DM_BLE_TRACK_ADV_DATA;
typedef void (tBTA_BLE_SCAN_THRESHOLD_CBACK)(tBTA_DM_BLE_REF_VALUE ref_value);
typedef void (tBTA_BLE_SCAN_REP_CBACK) (tBTA_DM_BLE_REF_VALUE ref_value, UINT8 report_format,
UINT8 num_records, UINT16 data_len,
UINT8 *p_rep_data, tBTA_STATUS status);
typedef void (tBTA_BLE_SCAN_SETUP_CBACK) (tBTA_BLE_BATCH_SCAN_EVT evt,
tBTA_DM_BLE_REF_VALUE ref_value,
tBTA_STATUS status);
typedef void (tBTA_START_STOP_SCAN_CMPL_CBACK) (tBTA_STATUS status);
typedef void (tBTA_START_STOP_ADV_CMPL_CBACK) (tBTA_STATUS status);
typedef void (tBTA_BLE_TRACK_ADV_CMPL_CBACK)(int action, tBTA_STATUS status,
tBTA_DM_BLE_PF_AVBL_SPACE avbl_space,
tBTA_DM_BLE_REF_VALUE ref_value);
typedef void (tBTA_BLE_TRACK_ADV_CBACK)(tBTA_DM_BLE_TRACK_ADV_DATA *p_adv_data);
typedef void (tBTA_BLE_ENERGY_INFO_CBACK)(tBTA_DM_BLE_TX_TIME_MS tx_time,
tBTA_DM_BLE_RX_TIME_MS rx_time,
tBTA_DM_BLE_IDLE_TIME_MS idle_time,
tBTA_DM_BLE_ENERGY_USED energy_used,
tBTA_DM_CONTRL_STATE ctrl_state,
tBTA_STATUS status);
#else
typedef UINT8 tBTA_DM_BLE_SEC_ACT;
#endif
/* Maximum service name length */
#define BTA_SERVICE_NAME_LEN 35
#define BTA_SERVICE_DESP_LEN BTA_SERVICE_NAME_LEN
#define BTA_PROVIDER_NAME_LEN BTA_SERVICE_NAME_LEN
/* link policy masks */
#define BTA_DM_LP_SWITCH HCI_ENABLE_MASTER_SLAVE_SWITCH
#define BTA_DM_LP_HOLD HCI_ENABLE_HOLD_MODE
#define BTA_DM_LP_SNIFF HCI_ENABLE_SNIFF_MODE
#define BTA_DM_LP_PARK HCI_ENABLE_PARK_MODE
typedef UINT16 tBTA_DM_LP_MASK;
/* power mode actions */
#define BTA_DM_PM_NO_ACTION 0x00 /* no change to the current pm setting */
#define BTA_DM_PM_PARK 0x10 /* prefers park mode */
#define BTA_DM_PM_SNIFF 0x20 /* prefers sniff mode */
#define BTA_DM_PM_SNIFF1 0x21 /* prefers sniff1 mode */
#define BTA_DM_PM_SNIFF2 0x22 /* prefers sniff2 mode */
#define BTA_DM_PM_SNIFF3 0x23 /* prefers sniff3 mode */
#define BTA_DM_PM_SNIFF4 0x24 /* prefers sniff4 mode */
#define BTA_DM_PM_SNIFF5 0x25 /* prefers sniff5 mode */
#define BTA_DM_PM_SNIFF6 0x26 /* prefers sniff6 mode */
#define BTA_DM_PM_SNIFF7 0x27 /* prefers sniff7 mode */
#define BTA_DM_PM_SNIFF_USER0 0x28 /* prefers user-defined sniff0 mode (testtool only) */
#define BTA_DM_PM_SNIFF_USER1 0x29 /* prefers user-defined sniff1 mode (testtool only) */
#define BTA_DM_PM_ACTIVE 0x40 /* prefers active mode */
#define BTA_DM_PM_RETRY 0x80 /* retry power mode based on current settings */
#define BTA_DM_PM_SUSPEND 0x04 /* prefers suspend mode */
#define BTA_DM_PM_NO_PREF 0x01 /* service has no prefernce on power mode setting. eg. connection to service got closed */
typedef UINT8 tBTA_DM_PM_ACTION;
/* index to bta_dm_ssr_spec */
#define BTA_DM_PM_SSR0 0
#define BTA_DM_PM_SSR1 1 /* BTA_DM_PM_SSR1 will be dedicated for
HH SSR setting entry, no other profile can use it */
#define BTA_DM_PM_SSR2 2
#define BTA_DM_PM_SSR3 3
#define BTA_DM_PM_SSR4 4
#define BTA_DM_PM_SSR5 5
#define BTA_DM_PM_SSR6 6
#define BTA_DM_PM_NUM_EVTS 9
#ifndef BTA_DM_PM_PARK_IDX
#define BTA_DM_PM_PARK_IDX 5 /* the actual index to bta_dm_pm_md[] for PARK mode */
#endif
#ifndef BTA_DM_PM_SNIFF_A2DP_IDX
#define BTA_DM_PM_SNIFF_A2DP_IDX BTA_DM_PM_SNIFF
#endif
#ifndef BTA_DM_PM_SNIFF_HD_IDLE_IDX
#define BTA_DM_PM_SNIFF_HD_IDLE_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_SNIFF_SCO_OPEN_IDX
#define BTA_DM_PM_SNIFF_SCO_OPEN_IDX BTA_DM_PM_SNIFF3
#endif
#ifndef BTA_DM_PM_SNIFF_HD_ACTIVE_IDX
#define BTA_DM_PM_SNIFF_HD_ACTIVE_IDX BTA_DM_PM_SNIFF4
#endif
#ifndef BTA_DM_PM_SNIFF_HH_OPEN_IDX
#define BTA_DM_PM_SNIFF_HH_OPEN_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_SNIFF_HH_ACTIVE_IDX
#define BTA_DM_PM_SNIFF_HH_ACTIVE_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_SNIFF_HH_IDLE_IDX
#define BTA_DM_PM_SNIFF_HH_IDLE_IDX BTA_DM_PM_SNIFF2
#endif
#ifndef BTA_DM_PM_HH_OPEN_DELAY
#define BTA_DM_PM_HH_OPEN_DELAY 30000
#endif
#ifndef BTA_DM_PM_HH_ACTIVE_DELAY
#define BTA_DM_PM_HH_ACTIVE_DELAY 30000
#endif
#ifndef BTA_DM_PM_HH_IDLE_DELAY
#define BTA_DM_PM_HH_IDLE_DELAY 30000
#endif
/* The Sniff Parameters defined below must be ordered from highest
* latency (biggest interval) to lowest latency. If there is a conflict
* among the connected services the setting with the lowest latency will
* be selected. If a device should override a sniff parameter then it
* must insure that order is maintained.
*/
#ifndef BTA_DM_PM_SNIFF_MAX
#define BTA_DM_PM_SNIFF_MAX 800
#define BTA_DM_PM_SNIFF_MIN 400
#define BTA_DM_PM_SNIFF_ATTEMPT 4
#define BTA_DM_PM_SNIFF_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF1_MAX
#define BTA_DM_PM_SNIFF1_MAX 400
#define BTA_DM_PM_SNIFF1_MIN 200
#define BTA_DM_PM_SNIFF1_ATTEMPT 4
#define BTA_DM_PM_SNIFF1_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF2_MAX
#define BTA_DM_PM_SNIFF2_MAX 180
#define BTA_DM_PM_SNIFF2_MIN 150
#define BTA_DM_PM_SNIFF2_ATTEMPT 4
#define BTA_DM_PM_SNIFF2_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF3_MAX
#define BTA_DM_PM_SNIFF3_MAX 150
#define BTA_DM_PM_SNIFF3_MIN 50
#define BTA_DM_PM_SNIFF3_ATTEMPT 4
#define BTA_DM_PM_SNIFF3_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF4_MAX
#define BTA_DM_PM_SNIFF4_MAX 54
#define BTA_DM_PM_SNIFF4_MIN 30
#define BTA_DM_PM_SNIFF4_ATTEMPT 4
#define BTA_DM_PM_SNIFF4_TIMEOUT 1
#endif
#ifndef BTA_DM_PM_SNIFF5_MAX
#define BTA_DM_PM_SNIFF5_MAX 36
#define BTA_DM_PM_SNIFF5_MIN 30
#define BTA_DM_PM_SNIFF5_ATTEMPT 2
#define BTA_DM_PM_SNIFF5_TIMEOUT 0
#endif
#ifndef BTA_DM_PM_PARK_MAX
#define BTA_DM_PM_PARK_MAX 800
#define BTA_DM_PM_PARK_MIN 400
#define BTA_DM_PM_PARK_ATTEMPT 0
#define BTA_DM_PM_PARK_TIMEOUT 0
#endif
/* Switch callback events */
#define BTA_DM_SWITCH_CMPL_EVT 0 /* Completion of the Switch API */
typedef UINT8 tBTA_DM_SWITCH_EVT;
typedef void (tBTA_DM_SWITCH_CBACK)(tBTA_DM_SWITCH_EVT event, tBTA_STATUS status);
/* Audio routing out configuration */
#define BTA_DM_ROUTE_NONE 0x00 /* No Audio output */
#define BTA_DM_ROUTE_DAC 0x01 /* routing over analog output */
#define BTA_DM_ROUTE_I2S 0x02 /* routing over digital (I2S) output */
#define BTA_DM_ROUTE_BT_MONO 0x04 /* routing over SCO */
#define BTA_DM_ROUTE_BT_STEREO 0x08 /* routing over BT Stereo */
#define BTA_DM_ROUTE_HOST 0x10 /* routing over Host */
#define BTA_DM_ROUTE_FMTX 0x20 /* routing over FMTX */
#define BTA_DM_ROUTE_FMRX 0x40 /* routing over FMRX */
#define BTA_DM_ROUTE_BTSNK 0x80 /* routing over BT SNK */
typedef UINT8 tBTA_DM_ROUTE_PATH;
#if (SDP_INCLUDED == TRUE)
/* Device Identification (DI) data structure
*/
/* Used to set the DI record */
typedef tSDP_DI_RECORD tBTA_DI_RECORD;
/* Used to get the DI record */
typedef tSDP_DI_GET_RECORD tBTA_DI_GET_RECORD;
/* SDP discovery database */
typedef tSDP_DISCOVERY_DB tBTA_DISCOVERY_DB;
#endif ///SDP_INCLUDED == TRUE
#ifndef BTA_DI_NUM_MAX
#define BTA_DI_NUM_MAX 3
#endif
/* Device features mask definitions */
#define BTA_FEATURE_BYTES_PER_PAGE BTM_FEATURE_BYTES_PER_PAGE
#define BTA_EXT_FEATURES_PAGE_MAX BTM_EXT_FEATURES_PAGE_MAX
/* ACL type
*/
#define BTA_DM_LINK_TYPE_BR_EDR 0x01
#define BTA_DM_LINK_TYPE_LE 0x02
#define BTA_DM_LINK_TYPE_ALL 0xFF
typedef UINT8 tBTA_DM_LINK_TYPE;
#define IMMEDIATE_DELY_MODE 0x00
#define ONFOUND_DELY_MODE 0x01
#define BATCH_DELY_MODE 0x02
#define ALLOW_ALL_FILTER 0x00
#define LOWEST_RSSI_VALUE 129
/*****************************************************************************
** External Function Declarations
*****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/*******************************************************************************
**
** Function BTA_EnableBluetooth
**
** Description This function initializes BTA and prepares BTA and the
** Bluetooth protocol stack for use. This function is
** typically called at startup or when Bluetooth services
** are required by the phone. This function must be called
** before calling any other API function.
**
**
** Returns BTA_SUCCESS if successful.
** BTA_FAIL if internal failure.
**
*******************************************************************************/
extern tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK *p_cback);
/*******************************************************************************
**
** Function BTA_DisableBluetooth
**
** Description This function disables BTA and the Bluetooth protocol
** stack. It is called when BTA is no longer being used
** by any application in the system.
**
**
** Returns void
**
*******************************************************************************/
extern tBTA_STATUS BTA_DisableBluetooth(void);
/*******************************************************************************
**
** Function BTA_EnableTestMode
**
** Description Enables bluetooth device under test mode
**
**
** Returns tBTA_STATUS
**
*******************************************************************************/
extern tBTA_STATUS BTA_EnableTestMode(void);
/*******************************************************************************
**
** Function BTA_DisableTestMode
**
** Description Disable bluetooth device under test mode
**
**
** Returns None
**
*******************************************************************************/
extern void BTA_DisableTestMode(void);
/*******************************************************************************
**
** Function BTA_DmSetDeviceName
**
** Description This function sets the Bluetooth name of the local device.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetDeviceName(char *p_name);
/*******************************************************************************
**
** Function BTA_DmSetVisibility
**
** Description This function sets the Bluetooth connectable,discoverable,
** pairable and conn paired only modesmodes of the local device.
** This controls whether other Bluetooth devices can find and connect to
** the local device.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode, UINT8 pairable_mode, UINT8 conn_filter);
/*******************************************************************************
**
** Function BTA_DmSearch
**
** Description This function searches for peer Bluetooth devices. It
** first performs an inquiry; for each device found from the
** inquiry it gets the remote name of the device. If
** parameter services is nonzero, service discovery will be
** performed on each device for the services specified.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK services,
tBTA_DM_SEARCH_CBACK *p_cback);
/*******************************************************************************
**
** Function BTA_DmSearchCancel
**
** Description This function cancels a search that has been initiated
** by calling BTA_DmSearch().
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSearchCancel(void);
/*******************************************************************************
**
** Function BTA_DmDiscover
**
** Description This function performs service discovery for the services
** of a particular peer device.
**
**
** Returns void
**
*******************************************************************************/
#if (SDP_INCLUDED == TRUE)
extern void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services,
tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search);
// btla-specific ++
/*******************************************************************************
**
** Function BTA_DmDiscoverUUID
**
** Description This function performs service discovery for the services
** of a particular peer device.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid,
tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search);
#endif ///SDP_INCLUDED == TRUE
/*******************************************************************************
**
** Function BTA_DmGetCachedRemoteName
**
** Description Retieve cached remote name if available
**
** Returns BTA_SUCCESS if cached name was retrieved
** BTA_FAILURE if cached name is not available
**
*******************************************************************************/
tBTA_STATUS BTA_DmGetCachedRemoteName(BD_ADDR remote_device, UINT8 **pp_cached_name);
// btla-specific --
/*******************************************************************************
**
** Function BTA_DmBond
**
** Description This function initiates a bonding procedure with a peer
** device. The bonding procedure enables authentication
** and optionally encryption on the Bluetooth link.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBond(BD_ADDR bd_addr);
/*******************************************************************************
**
** Function BTA_DmBondByTransport
**
** Description This function initiates a bonding procedure with a peer
** device by designated transport. The bonding procedure enables
** authentication and optionally encryption on the Bluetooth link.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBondByTransport(BD_ADDR bd_addr, tBTA_TRANSPORT transport);
/*******************************************************************************
**
** Function BTA_DmBondCancel
**
** Description This function cancels a bonding procedure with a peer
** device.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBondCancel(BD_ADDR bd_addr);
/*******************************************************************************
**
** Function BTA_DmPinReply
**
** Description This function provides a PIN when one is requested by DM
** during a bonding procedure. The application should call
** this function after the security callback is called with
** a BTA_DM_PIN_REQ_EVT.
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmPinReply(BD_ADDR bd_addr, BOOLEAN accept, UINT8 pin_len,
UINT8 *p_pin);
#if (BTM_OOB_INCLUDED == TRUE)
/*******************************************************************************
**
** Function BTA_DmLocalOob
**
** Description This function retrieves the OOB data from local controller.
** The result is reported by bta_dm_co_loc_oob().
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmLocalOob(void);
#endif /* BTM_OOB_INCLUDED */
/*******************************************************************************
**
** Function BTA_DmConfirm
**
** Description This function accepts or rejects the numerical value of the
** Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmConfirm(BD_ADDR bd_addr, BOOLEAN accept);
/*******************************************************************************
**
** Function BTA_DmAddDevice
**
** Description This function adds a device to the security database list
** of peer devices. This function would typically be called
** at system startup to initialize the security database with
** known peer devices. This is a direct execution function
** that may lock task scheduling on some platforms.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class,
LINK_KEY link_key, tBTA_SERVICE_MASK trusted_mask,
BOOLEAN is_trusted, UINT8 key_type,
tBTA_IO_CAP io_cap, UINT8 pin_length);
/*******************************************************************************
**
** Function BTA_DmRemoveDevice
**
** Description This function removes a device from the security database.
** This is a direct execution function that may lock task
** scheduling on some platforms.
**
**
** Returns BTA_SUCCESS if successful.
** BTA_FAIL if operation failed.
**
*******************************************************************************/
extern tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr);
/*******************************************************************************
**
** Function BTA_GetEirService
**
** Description This function is called to get BTA service mask from EIR.
**
** Parameters p_eir - pointer of EIR significant part
** p_services - return the BTA service mask
**
** Returns None
**
*******************************************************************************/
extern void BTA_GetEirService( UINT8 *p_eir, tBTA_SERVICE_MASK *p_services );
/*******************************************************************************
**
** Function BTA_DmGetConnectionState
**
** Description Returns whether the remote device is currently connected.
**
** Returns 0 if the device is NOT connected.
**
*******************************************************************************/
extern UINT16 BTA_DmGetConnectionState( BD_ADDR bd_addr );
#if (SDP_INCLUDED == TRUE)
/*******************************************************************************
**
** Function BTA_DmSetLocalDiRecord
**
** Description This function adds a DI record to the local SDP database.
**
** Returns BTA_SUCCESS if record set sucessfully, otherwise error code.
**
*******************************************************************************/
extern tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info,
UINT32 *p_handle );
#endif ///SDP_INCLUDED == TRUE
/*******************************************************************************
**
**
** Function BTA_DmCloseACL
**
** Description This function force to close an ACL connection and remove the
** device from the security database list of known devices.
**
** Parameters: bd_addr - Address of the peer device
** remove_dev - remove device or not after link down
** transport - which transport to close
**
** Returns void.
**
*******************************************************************************/
extern void BTA_DmCloseACL(BD_ADDR bd_addr, BOOLEAN remove_dev, tBTA_TRANSPORT transport);
/*******************************************************************************
**
** Function bta_dmexecutecallback
**
** Description This function will request BTA to execute a call back in the context of BTU task
** This API was named in lower case because it is only intended
** for the internal customers(like BTIF).
**
** Returns void
**
*******************************************************************************/
extern void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK *p_callback, void *p_param);
#if (BTM_SCO_HCI_INCLUDED == TRUE)
/*******************************************************************************
**
** Function BTA_DmPcmInitSamples
**
** Description initialize the down sample converter.
**
** src_sps: original samples per second (source audio data)
** (ex. 44100, 48000)
** bits: number of bits per pcm sample (16)
** n_channels: number of channels (i.e. mono(1), stereo(2)...)
**
** Returns none
**
*******************************************************************************/
extern void BTA_DmPcmInitSamples (UINT32 src_sps, UINT32 bits, UINT32 n_channels);
/**************************************************************************************
** Function BTA_DmPcmResample
**
** Description Down sampling utility to convert higher sampling rate into 8K/16bits
** PCM samples.
**
** Parameters p_src: pointer to the buffer where the original sampling PCM
** are stored.
** in_bytes: Length of the input PCM sample buffer in byte.
** p_dst: pointer to the buffer which is to be used to store
** the converted PCM samples.
**
**
** Returns INT32: number of samples converted.
**
**************************************************************************************/
extern INT32 BTA_DmPcmResample (void *p_src, UINT32 in_bytes, void *p_dst);
#endif
#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
/* BLE related API functions */
/*******************************************************************************
**
** Function BTA_DmBleSecurityGrant
**
** Description Grant security request access.
**
** Parameters: bd_addr - BD address of the peer
** res - security grant status.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRANT res);
/*******************************************************************************
**
** Function BTA_DmBleSetBgConnType
**
** Description This function is called to set BLE connectable mode for a
** peripheral device.
**
** Parameters bg_conn_type: it can be auto connection, or selective connection.
** p_select_cback: callback function when selective connection procedure
** is being used.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, tBTA_DM_BLE_SEL_CBACK *p_select_cback);
/*******************************************************************************
**
** Function BTA_DmBlePasskeyReply
**
** Description Send BLE SMP passkey reply.
**
** Parameters: bd_addr - BD address of the peer
** accept - passkey entry sucessful or declined.
** passkey - passkey value, must be a 6 digit number,
** can be lead by 0.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, BOOLEAN accept, UINT32 passkey);
/*******************************************************************************
**
** Function BTA_DmBleConfirmReply
**
** Description Send BLE SMP SC user confirmation reply.
**
** Parameters: bd_addr - BD address of the peer
** accept - numbers to compare are the same or different.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleConfirmReply(BD_ADDR bd_addr, BOOLEAN accept);
/*******************************************************************************
**
** Function BTA_DmAddBleDevice
**
** Description Add a BLE device. This function will be normally called
** during host startup to restore all required information
** for a LE device stored in the NVRAM.
**
** Parameters: bd_addr - BD address of the peer
** dev_type - Remote device's device type.
** addr_type - LE device address type.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type,
tBT_DEVICE_TYPE dev_type);
/*******************************************************************************
**
** Function BTA_DmAddBleKey
**
** Description Add/modify LE device information. This function will be
** normally called during host startup to restore all required
** information stored in the NVRAM.
**
** Parameters: bd_addr - BD address of the peer
** p_le_key - LE key values.
** key_type - LE SMP key type.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmAddBleKey (BD_ADDR bd_addr,
tBTA_LE_KEY_VALUE *p_le_key,
tBTA_LE_KEY_TYPE key_type);
/*******************************************************************************
**
** Function BTA_DmSetBlePrefConnParams
**
** Description This function is called to set the preferred connection
** parameters when default connection parameter is not desired.
**
** Parameters: bd_addr - BD address of the peripheral
** min_conn_int - minimum preferred connection interval
** max_conn_int - maximum preferred connection interval
** slave_latency - preferred slave latency
** supervision_tout - preferred supervision timeout
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr,
UINT16 min_conn_int, UINT16 max_conn_int,
UINT16 slave_latency, UINT16 supervision_tout );
/*******************************************************************************
**
** Function BTA_DmSetBleConnScanParams
**
** Description This function is called to set scan parameters used in
** BLE connection request
**
** Parameters: scan_interval - scan interval
** scan_window - scan window
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetBleConnScanParams(UINT32 scan_interval,
UINT32 scan_window);
/*******************************************************************************
**
** Function BTA_DmSetBleScanParams
**
** Description This function is called to set scan parameters
**
** Parameters: client_if - Client IF
** scan_interval - scan interval
** scan_window - scan window
** scan_mode - scan mode
** scan_param_setup_status_cback - Set scan param status callback
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetBleScanParams(tGATT_IF client_if, UINT32 scan_interval,
UINT32 scan_window, tBLE_SCAN_MODE scan_mode,
tBLE_SCAN_PARAM_SETUP_CBACK scan_param_setup_status_cback);
/*******************************************************************************
**
** Function BTA_DmSetBleScanFilterParams
**
** Description This function is called to set scan parameters
**
** Parameters: client_if - Client IF
** scan_interval - scan interval
** scan_window - scan window
** scan_mode - scan mode
** scan_param_setup_status_cback - Set scan param status callback
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetBleScanFilterParams(tGATT_IF client_if, UINT32 scan_interval,
UINT32 scan_window, tBLE_SCAN_MODE scan_mode, UINT8 scan_fil_poilcy,
UINT8 addr_type_own, tBLE_SCAN_PARAM_SETUP_CBACK scan_param_setup_cback);
/*******************************************************************************
**
** Function BTA_DmSetBleAdvParams
**
** Description This function sets the advertising parameters BLE functionality.
** It is to be called when device act in peripheral or broadcaster
** role.
**
** Parameters: adv_int_min - adv interval minimum
** adv_int_max - adv interval max
** p_dir_bda - directed adv initator address
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSetBleAdvParams (UINT16 adv_int_min, UINT16 adv_int_max,
tBLE_BD_ADDR *p_dir_bda);
extern void BTA_DmSetBleAdvParamsAll (UINT16 adv_int_min, UINT16 adv_int_max,
UINT8 adv_type, tBLE_ADDR_TYPE addr_type_own,
tBTM_BLE_ADV_CHNL_MAP chnl_map, tBTM_BLE_AFP adv_fil_pol,
tBLE_BD_ADDR *p_dir_bda, tBTA_START_ADV_CMPL_CBACK p_start_adv_cb);
/*******************************************************************************
**
** Function BTA_DmSearchExt
**
** Description This function searches for peer Bluetooth devices. It performs
** an inquiry and gets the remote name for devices. Service
** discovery is done if services is non zero
**
** Parameters p_dm_inq: inquiry conditions
** services: if service is not empty, service discovery will be done.
** for all GATT based service condition, put num_uuid, and
** p_uuid is the pointer to the list of UUID values.
** p_cback: callback functino when search is completed.
**
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services,
tBTA_DM_SEARCH_CBACK *p_cback);
/*******************************************************************************
**
** Function BTA_DmDiscoverExt
**
** Description This function does service discovery for services of a
** peer device. When services.num_uuid is 0, it indicates all
** GATT based services are to be searched; other wise a list of
** UUID of interested services should be provided through
** services.p_uuid.
**
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services,
tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search);
/*******************************************************************************
**
** Function BTA_DmDiscoverByTransport
**
** Description This function does service discovery on particular transport
** for services of a
** peer device. When services.num_uuid is 0, it indicates all
** GATT based services are to be searched; other wise a list of
** UUID of interested services should be provided through
** p_services->p_uuid.
**
**
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmDiscoverByTransport(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services,
tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search,
tBTA_TRANSPORT transport);
/*******************************************************************************
**
** Function BTA_DmSetEncryption
**
** Description This function is called to ensure that connection is
** encrypted. Should be called only on an open connection.
** Typically only needed for connections that first want to
** bring up unencrypted links, then later encrypt them.
**
** Parameters: bd_addr - Address of the peer device
** transport - transport of the link to be encruypted
** p_callback - Pointer to callback function to indicat the
** link encryption status
** sec_act - This is the security action to indicate
** what knid of BLE security level is required for
** the BLE link if the BLE is supported
** Note: This parameter is ignored for the BR/EDR link
** or the BLE is not supported
**
** Returns void
**
**
*******************************************************************************/
extern void BTA_DmSetEncryption(BD_ADDR bd_addr, tBTA_TRANSPORT transport,
tBTA_DM_ENCRYPT_CBACK *p_callback,
tBTA_DM_BLE_SEC_ACT sec_act);
/*******************************************************************************
**
** Function BTA_DmBleObserve
**
** Description This procedure keep the device listening for advertising
** events from a broadcast device.
**
** Parameters start: start or stop observe.
** duration : Duration of the scan. Continuous scan if 0 is passed
** p_results_cb: Callback to be called with scan results
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleObserve(BOOLEAN start, UINT32 duration,
tBTA_DM_SEARCH_CBACK *p_results_cb,
tBTA_START_STOP_SCAN_CMPL_CBACK *p_start_stop_scan_cb);
extern void BTA_DmBleStopAdvertising(void);
extern void BTA_DmSetRandAddress(BD_ADDR rand_addr);
#endif
#if BLE_INCLUDED == TRUE
// btla-specific --
/*******************************************************************************
**
** Function BTA_DmBleConfigLocalPrivacy
**
** Description Enable/disable privacy on the local device
**
** Parameters: privacy_enable - enable/disabe privacy on remote device.
** set_local_privacy_cback -callback to be called with result
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleConfigLocalPrivacy(BOOLEAN privacy_enable, tBTA_SET_LOCAL_PRIVACY_CBACK *set_local_privacy_cback);
/*******************************************************************************
**
** Function BTA_DmBleEnableRemotePrivacy
**
** Description Enable/disable privacy on a remote device
**
** Parameters: bd_addr - BD address of the peer
** privacy_enable - enable/disabe privacy on remote device.
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleEnableRemotePrivacy(BD_ADDR bd_addr, BOOLEAN privacy_enable);
/*******************************************************************************
**
** Function BTA_DmBleSetAdvConfig
**
** Description This function is called to override the BTA default ADV parameters.
**
** Parameters Pointer to User defined ADV data structure
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleSetAdvConfig (tBTA_BLE_AD_MASK data_mask,
tBTA_BLE_ADV_DATA *p_adv_cfg,
tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback);
/*******************************************************************************
**
** Function BTA_DmBleSetAdvConfigRaw
**
** Description This function is called to set raw Advertising data
**
** Parameters p_raw_adv : raw advertising data.
** raw_adv_len : raw advertising data length.
** p_adv_data_cback : set adv data complete callback.
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleSetAdvConfigRaw (UINT8 *p_raw_adv, UINT32 raw_adv_len,
tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback);
/*******************************************************************************
**
** Function BTA_DmBleSetScanRsp
**
** Description This function is called to override the BTA scan response.
**
** Parameters Pointer to User defined ADV data structure
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleSetScanRsp (tBTA_BLE_AD_MASK data_mask,
tBTA_BLE_ADV_DATA *p_adv_cfg,
tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback);
/*******************************************************************************
**
** Function BTA_DmBleSetScanRspRaw
**
** Description This function is called to set raw scan response data
**
** Parameters p_raw_scan_rsp : raw scan_rspertising data.
** raw_scan_rsp_len : raw scan_rspertising data length.
** p_scan_rsp_data_cback : set scan_rsp data complete callback.
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleSetScanRspRaw (UINT8 *p_raw_scan_rsp, UINT32 raw_scan_rsp_len,
tBTA_SET_ADV_DATA_CMPL_CBACK *p_scan_rsp_data_cback);
/*******************************************************************************
**
** Function BTA_DmBleBroadcast
**
** Description This function starts or stops LE broadcasting.
**
** Parameters start: start or stop broadcast.
** p_start_stop_adv_cb: stop broadcast completed event
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleBroadcast (BOOLEAN start, tBTA_START_STOP_ADV_CMPL_CBACK *p_start_stop_adv_cb);
/*******************************************************************************
**
** Function BTA_BleEnableAdvInstance
**
** Description This function enables the Multi ADV instance feature
**
** Parameters p_params Pointer to ADV param user defined structure
** p_cback Pointer to Multi ADV callback structure
** p_ref - Reference pointer
**
** Returns None
**
*******************************************************************************/
extern void BTA_BleEnableAdvInstance (tBTA_BLE_ADV_PARAMS *p_params,
tBTA_BLE_MULTI_ADV_CBACK *p_cback, void *p_ref);
/*******************************************************************************
**
** Function BTA_BleUpdateAdvInstParam
**
** Description This function updates the Multi ADV instance params
**
** Parameters inst_id Instance ID
** p_params Pointer to ADV param user defined structure
**
** Returns None
**
*******************************************************************************/
extern void BTA_BleUpdateAdvInstParam (UINT8 inst_id,
tBTA_BLE_ADV_PARAMS *p_params);
/*******************************************************************************
**
** Function BTA_BleCfgAdvInstData
**
** Description This function is called to configure the ADV instance data
**
** Parameters inst_id - Instance ID
** is_scan_rsp - Boolean value Scan response
** Pointer to User defined ADV data structure
** Returns None
**
*******************************************************************************/
extern void BTA_BleCfgAdvInstData (UINT8 inst_id, BOOLEAN is_scan_rsp,
tBTA_BLE_AD_MASK data_mask, tBTA_BLE_ADV_DATA *p_data);
/*******************************************************************************
**
** Function BTA_BleDisableAdvInstance
**
** Description This function is called to disable the ADV instance
**
** Parameters inst_id - Instance ID to be disabled
**
** Returns None
**
*******************************************************************************/
extern void BTA_BleDisableAdvInstance(UINT8 inst_id);
/*******************************************************************************
**
** Function BTA_DmBleUpdateConnectionParams
**
** Description Update connection parameters, can only be used when connection is up.
**
** Parameters: bd_addr - BD address of the peer
** min_int - minimum connection interval, [0x0004~ 0x4000]
** max_int - maximum connection interval, [0x0004~ 0x4000]
** latency - slave latency [0 ~ 500]
** timeout - supervision timeout [0x000a ~ 0xc80]
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleUpdateConnectionParams(BD_ADDR bd_addr, UINT16 min_int,
UINT16 max_int, UINT16 latency, UINT16 timeout, tBTA_UPDATE_CONN_PARAM_CBACK *update_conn_param_cb);
/*******************************************************************************
**
** Function BTA_DmBleDisconnect
**
** Description This function is to disconnect the ble connection
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleDisconnect(BD_ADDR bd_addr);
/*******************************************************************************
**
** Function BTA_DmBleSetDataLength
**
** Description This function is to set maximum LE data packet size
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleSetDataLength(BD_ADDR remote_device, UINT16 tx_data_length, tBTA_SET_PKT_DATA_LENGTH_CBACK *p_set_pkt_data_cback);
/*******************************************************************************
**
** Function BTA_DmBleSetStorageParams
**
** Description This function is called to set the storage parameters
**
** Parameters batch_scan_full_max -Max storage space (in %) allocated to full scanning
** batch_scan_trunc_max -Max storage space (in %) allocated to truncated scanning
** batch_scan_notify_threshold - Setup notification level based on total space
** consumed by both pools. Setting it to 0 will disable threshold notification
** p_setup_cback - Setup callback
** p_thres_cback - Threshold callback
** p_rep_cback - Reports callback
** ref_value - Reference value
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleSetStorageParams(UINT8 batch_scan_full_max,
UINT8 batch_scan_trunc_max,
UINT8 batch_scan_notify_threshold,
tBTA_BLE_SCAN_SETUP_CBACK *p_setup_cback,
tBTA_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback,
tBTA_BLE_SCAN_REP_CBACK *p_rep_cback,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleEnableBatchScan
**
** Description This function is called to enable the batch scan
**
** Parameters scan_mode -Batch scan mode
** scan_interval - Scan interval
** scan_window - Scan window
** discard_rule -Discard rules
** addr_type - Address type
** ref_value - Reference value
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleEnableBatchScan(tBTA_BLE_BATCH_SCAN_MODE scan_mode,
UINT32 scan_interval, UINT32 scan_window,
tBTA_BLE_DISCARD_RULE discard_rule,
tBLE_ADDR_TYPE addr_type,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleReadScanReports
**
** Description This function is called to read the batch scan reports
**
** Parameters scan_mode -Batch scan mode
** ref_value - Reference value
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleReadScanReports(tBTA_BLE_BATCH_SCAN_MODE scan_type,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleDisableBatchScan
**
** Description This function is called to disable the batch scanning
**
** Parameters ref_value - Reference value
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleDisableBatchScan(tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmEnableScanFilter
**
** Description This function is called to enable the adv data payload filter
**
** Parameters action - enable or disable the APCF feature
** p_cmpl_cback - Command completed callback
** ref_value - Reference value
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmEnableScanFilter(UINT8 action,
tBTA_DM_BLE_PF_STATUS_CBACK *p_cmpl_cback,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleScanFilterSetup
**
** Description This function is called to setup the filter params
**
** Parameters p_target: enable the filter condition on a target device; if NULL
** filt_index - Filter index
** p_filt_params -Filter parameters
** ref_value - Reference value
** action - Add, delete or clear
** p_cmpl_back - Command completed callback
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleScanFilterSetup(UINT8 action,
tBTA_DM_BLE_PF_FILT_INDEX filt_index,
tBTA_DM_BLE_PF_FILT_PARAMS *p_filt_params,
tBLE_BD_ADDR *p_target,
tBTA_DM_BLE_PF_PARAM_CBACK *p_cmpl_cback,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleCfgFilterCondition
**
** Description This function is called to configure the adv data payload filter
** condition.
**
** Parameters action: to read/write/clear
** cond_type: filter condition type
** filt_index - Filter index
** p_cond: filter condition parameter
** p_cmpl_back - Command completed callback
** ref_value - Reference value
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleCfgFilterCondition(tBTA_DM_BLE_SCAN_COND_OP action,
tBTA_DM_BLE_PF_COND_TYPE cond_type,
tBTA_DM_BLE_PF_FILT_INDEX filt_index,
tBTA_DM_BLE_PF_COND_PARAM *p_cond,
tBTA_DM_BLE_PF_CFG_CBACK *p_cmpl_cback,
tBTA_DM_BLE_REF_VALUE ref_value);
/*******************************************************************************
**
** Function BTA_DmBleTrackAdvertiser
**
** Description This function is called to track the advertiser
**
** Parameters ref_value - Reference value
** p_track_adv_cback - ADV callback
**
** Returns None
**
*******************************************************************************/
extern void BTA_DmBleTrackAdvertiser(tBTA_DM_BLE_REF_VALUE ref_value,
tBTA_BLE_TRACK_ADV_CBACK *p_track_adv_cback);
/*******************************************************************************
**
** Function BTA_DmBleGetEnergyInfo
**
** Description This function is called to obtain the energy info
**
** Parameters p_cmpl_cback - Command complete callback
**
** Returns void
**
*******************************************************************************/
extern void BTA_DmBleGetEnergyInfo(tBTA_BLE_ENERGY_INFO_CBACK *p_cmpl_cback);
/*******************************************************************************
**
** Function BTA_BrcmInit
**
** Description This function initializes Broadcom specific VS handler in BTA
**
** Returns void
**
*******************************************************************************/
extern void BTA_VendorInit (void);
/*******************************************************************************
**
** Function BTA_BrcmCleanup
**
** Description This function frees up Broadcom specific VS specific dynamic memory
**
** Returns void
**
*******************************************************************************/
extern void BTA_VendorCleanup (void);
#endif
#ifdef __cplusplus
}
#endif
#endif /* BTA_API_H */
Reference in a new issue View git blame Copy permalink