118 lines
4.3 KiB
Plaintext
118 lines
4.3 KiB
Plaintext
menu "Ethernet"
|
|
|
|
menuconfig ETH_USE_ESP32_EMAC
|
|
depends on IDF_TARGET_ESP32
|
|
bool "Support ESP32 internal EMAC controller"
|
|
default y
|
|
help
|
|
ESP32 integrates a 10/100M Ethernet MAC controller.
|
|
|
|
if ETH_USE_ESP32_EMAC
|
|
choice ETH_PHY_INTERFACE
|
|
prompt "PHY interface"
|
|
default ETH_PHY_INTERFACE_RMII
|
|
help
|
|
Select the communication interface between MAC and PHY chip.
|
|
|
|
config ETH_PHY_INTERFACE_RMII
|
|
bool "Reduced Media Independent Interface (RMII)"
|
|
|
|
config ETH_PHY_INTERFACE_MII
|
|
bool "Media Independent Interface (MII)"
|
|
endchoice
|
|
|
|
if ETH_PHY_INTERFACE_RMII
|
|
choice ETH_RMII_CLK_MODE
|
|
prompt "RMII clock mode"
|
|
default ETH_RMII_CLK_INPUT
|
|
help
|
|
Select external or internal RMII clock.
|
|
|
|
config ETH_RMII_CLK_INPUT
|
|
bool "Input RMII clock from external"
|
|
help
|
|
MAC will get RMII clock from outside.
|
|
Note that ESP32 only supports GPIO0 to input the RMII clock.
|
|
|
|
config ETH_RMII_CLK_OUTPUT
|
|
bool "Output RMII clock from internal"
|
|
help
|
|
ESP32 can generate RMII clock by internal APLL.
|
|
This clock can be routed to the external PHY device.
|
|
ESP32 supports to route the RMII clock to GPIO0/16/17.
|
|
endchoice
|
|
endif
|
|
|
|
if ETH_RMII_CLK_INPUT
|
|
config ETH_RMII_CLK_IN_GPIO
|
|
int
|
|
range 0 0
|
|
default 0
|
|
help
|
|
ESP32 only supports GPIO0 to input the RMII clock.
|
|
endif
|
|
|
|
if ETH_RMII_CLK_OUTPUT
|
|
config ETH_RMII_CLK_OUTPUT_GPIO0
|
|
bool "Output RMII clock from GPIO0 (Experimental!)"
|
|
default n
|
|
help
|
|
GPIO0 can be set to output a pre-divided PLL clock (test only!).
|
|
Enabling this option will configure GPIO0 to output a 50MHz clock.
|
|
In fact this clock doesn't have directly relationship with EMAC peripheral.
|
|
Sometimes this clock won't work well with your PHY chip. You might need to
|
|
add some extra devices after GPIO0 (e.g. inverter).
|
|
Note that outputting RMII clock on GPIO0 is an experimental practice.
|
|
If you want the Ethernet to work with WiFi, don't select GPIO0 output mode for stability.
|
|
|
|
if !ETH_RMII_CLK_OUTPUT_GPIO0
|
|
config ETH_RMII_CLK_OUT_GPIO
|
|
int "RMII clock GPIO number"
|
|
range 16 17
|
|
default 17
|
|
help
|
|
Set the GPIO number to output RMII Clock.
|
|
endif
|
|
endif
|
|
|
|
config ETH_DMA_BUFFER_SIZE
|
|
int "Ethernet DMA buffer size (Byte)"
|
|
range 256 1600
|
|
default 512
|
|
help
|
|
Set the size of each buffer used by Ethernet MAC DMA.
|
|
|
|
config ETH_DMA_RX_BUFFER_NUM
|
|
int "Amount of Ethernet DMA Rx buffers"
|
|
range 3 30
|
|
default 10
|
|
help
|
|
Number of DMA receive buffers. Each buffer's size is ETH_DMA_BUFFER_SIZE.
|
|
Larger number of buffers could increase throughput somehow.
|
|
|
|
config ETH_DMA_TX_BUFFER_NUM
|
|
int "Amount of Ethernet DMA Tx buffers"
|
|
range 3 30
|
|
default 10
|
|
help
|
|
Number of DMA transmit buffers. Each buffer's size is ETH_DMA_BUFFER_SIZE.
|
|
Larger number of buffers could increase throughput somehow.
|
|
endif
|
|
|
|
menuconfig ETH_USE_SPI_ETHERNET
|
|
bool "Support SPI to Ethernet Module"
|
|
default y
|
|
help
|
|
ESP-IDF can also support some SPI-Ethernet module.
|
|
|
|
if ETH_USE_SPI_ETHERNET
|
|
config ETH_SPI_ETHERNET_DM9051
|
|
bool "Use DM9051"
|
|
default y
|
|
help
|
|
DM9051 is a fast Ethernet controller with an SPI interface.
|
|
It's also integrated with a 10/100M PHY and MAC.
|
|
Set true to enable DM9051 driver.
|
|
endif
|
|
endmenu
|