723 lines
33 KiB
C
723 lines
33 KiB
C
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#include <esp_types.h>
|
|
#include <stdlib.h>
|
|
#include <ctype.h>
|
|
#include "rom/ets_sys.h"
|
|
#include "esp_log.h"
|
|
#include "soc/rtc_io_reg.h"
|
|
#include "soc/sens_reg.h"
|
|
#include "soc/rtc_cntl_reg.h"
|
|
#include "rtc_io.h"
|
|
#include "touch_pad.h"
|
|
#include "adc.h"
|
|
#include "dac.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/xtensa_api.h"
|
|
#include "freertos/semphr.h"
|
|
|
|
static const char *RTC_MODULE_TAG = "RTC_MODULE";
|
|
|
|
#define RTC_MODULE_CHECK(a, str, ret_val) if (!(a)) { \
|
|
ESP_LOGE(RTC_MODULE_TAG,"%s:%d (%s):%s", __FILE__, __LINE__, __FUNCTION__, str); \
|
|
return (ret_val); \
|
|
}
|
|
|
|
#define ADC1_CHECK_FUNCTION_RET(fun_ret) if(fun_ret!=ESP_OK){\
|
|
ESP_LOGE(RTC_MODULE_TAG,"%s:%d\n",__FUNCTION__,__LINE__);\
|
|
return ESP_FAIL;\
|
|
}
|
|
|
|
portMUX_TYPE rtc_spinlock = portMUX_INITIALIZER_UNLOCKED;
|
|
static xSemaphoreHandle rtc_touch_sem = NULL;
|
|
|
|
//Reg,Mux,Fun,IE,Up,Down,Rtc_number
|
|
const rtc_gpio_desc_t rtc_gpio_desc[GPIO_PIN_COUNT] = {
|
|
{RTC_IO_TOUCH_PAD1_REG, RTC_IO_TOUCH_PAD1_MUX_SEL_M, RTC_IO_TOUCH_PAD1_FUN_SEL_S, RTC_IO_TOUCH_PAD1_FUN_IE_M, RTC_IO_TOUCH_PAD1_RUE_M, RTC_IO_TOUCH_PAD1_RDE_M, RTC_IO_TOUCH_PAD1_SLP_SEL_M, RTC_IO_TOUCH_PAD1_SLP_IE_M, RTC_IO_TOUCH_PAD1_HOLD_M, RTC_CNTL_TOUCH_PAD1_HOLD_FORCE_M, 11}, //0
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //1
|
|
{RTC_IO_TOUCH_PAD2_REG, RTC_IO_TOUCH_PAD2_MUX_SEL_M, RTC_IO_TOUCH_PAD2_FUN_SEL_S, RTC_IO_TOUCH_PAD2_FUN_IE_M, RTC_IO_TOUCH_PAD2_RUE_M, RTC_IO_TOUCH_PAD2_RDE_M, RTC_IO_TOUCH_PAD2_SLP_SEL_M, RTC_IO_TOUCH_PAD2_SLP_IE_M, RTC_IO_TOUCH_PAD2_HOLD_M, RTC_CNTL_TOUCH_PAD2_HOLD_FORCE_M, 12}, //2
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //3
|
|
{RTC_IO_TOUCH_PAD0_REG, RTC_IO_TOUCH_PAD0_MUX_SEL_M, RTC_IO_TOUCH_PAD0_FUN_SEL_S, RTC_IO_TOUCH_PAD0_FUN_IE_M, RTC_IO_TOUCH_PAD0_RUE_M, RTC_IO_TOUCH_PAD0_RDE_M, RTC_IO_TOUCH_PAD0_SLP_SEL_M, RTC_IO_TOUCH_PAD0_SLP_IE_M, RTC_IO_TOUCH_PAD0_HOLD_M, RTC_CNTL_TOUCH_PAD0_HOLD_FORCE_M, 10}, //4
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //5
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //6
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //7
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //8
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //9
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //10
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //11
|
|
{RTC_IO_TOUCH_PAD5_REG, RTC_IO_TOUCH_PAD5_MUX_SEL_M, RTC_IO_TOUCH_PAD5_FUN_SEL_S, RTC_IO_TOUCH_PAD5_FUN_IE_M, RTC_IO_TOUCH_PAD5_RUE_M, RTC_IO_TOUCH_PAD5_RDE_M, RTC_IO_TOUCH_PAD5_SLP_SEL_M, RTC_IO_TOUCH_PAD5_SLP_IE_M, RTC_IO_TOUCH_PAD5_HOLD_M, RTC_CNTL_TOUCH_PAD5_HOLD_FORCE_M, 15}, //12
|
|
{RTC_IO_TOUCH_PAD4_REG, RTC_IO_TOUCH_PAD4_MUX_SEL_M, RTC_IO_TOUCH_PAD4_FUN_SEL_S, RTC_IO_TOUCH_PAD4_FUN_IE_M, RTC_IO_TOUCH_PAD4_RUE_M, RTC_IO_TOUCH_PAD4_RDE_M, RTC_IO_TOUCH_PAD4_SLP_SEL_M, RTC_IO_TOUCH_PAD4_SLP_IE_M, RTC_IO_TOUCH_PAD4_HOLD_M, RTC_CNTL_TOUCH_PAD4_HOLD_FORCE_M, 14}, //13
|
|
{RTC_IO_TOUCH_PAD6_REG, RTC_IO_TOUCH_PAD6_MUX_SEL_M, RTC_IO_TOUCH_PAD6_FUN_SEL_S, RTC_IO_TOUCH_PAD6_FUN_IE_M, RTC_IO_TOUCH_PAD6_RUE_M, RTC_IO_TOUCH_PAD6_RDE_M, RTC_IO_TOUCH_PAD6_SLP_SEL_M, RTC_IO_TOUCH_PAD6_SLP_IE_M, RTC_IO_TOUCH_PAD6_HOLD_M, RTC_CNTL_TOUCH_PAD6_HOLD_FORCE_M, 16}, //14
|
|
{RTC_IO_TOUCH_PAD3_REG, RTC_IO_TOUCH_PAD3_MUX_SEL_M, RTC_IO_TOUCH_PAD3_FUN_SEL_S, RTC_IO_TOUCH_PAD3_FUN_IE_M, RTC_IO_TOUCH_PAD3_RUE_M, RTC_IO_TOUCH_PAD3_RDE_M, RTC_IO_TOUCH_PAD3_SLP_SEL_M, RTC_IO_TOUCH_PAD3_SLP_IE_M, RTC_IO_TOUCH_PAD3_HOLD_M, RTC_CNTL_TOUCH_PAD3_HOLD_FORCE_M, 13}, //15
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //16
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //17
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //18
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //19
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //20
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //21
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //22
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //23
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //24
|
|
{RTC_IO_PAD_DAC1_REG, RTC_IO_PDAC1_MUX_SEL_M, RTC_IO_PDAC1_FUN_SEL_S, RTC_IO_PDAC1_FUN_IE_M, RTC_IO_PDAC1_RUE_M, RTC_IO_PDAC1_RDE_M, RTC_IO_PDAC1_SLP_SEL_M, RTC_IO_PDAC1_SLP_IE_M, RTC_IO_PDAC1_HOLD_M, RTC_CNTL_PDAC1_HOLD_FORCE_M, 6}, //25
|
|
{RTC_IO_PAD_DAC2_REG, RTC_IO_PDAC2_MUX_SEL_M, RTC_IO_PDAC2_FUN_SEL_S, RTC_IO_PDAC2_FUN_IE_M, RTC_IO_PDAC2_RUE_M, RTC_IO_PDAC2_RDE_M, RTC_IO_PDAC2_SLP_SEL_M, RTC_IO_PDAC2_SLP_IE_M, RTC_IO_PDAC2_HOLD_M, RTC_CNTL_PDAC1_HOLD_FORCE_M, 7}, //26
|
|
{RTC_IO_TOUCH_PAD7_REG, RTC_IO_TOUCH_PAD7_MUX_SEL_M, RTC_IO_TOUCH_PAD7_FUN_SEL_S, RTC_IO_TOUCH_PAD7_FUN_IE_M, RTC_IO_TOUCH_PAD7_RUE_M, RTC_IO_TOUCH_PAD7_RDE_M, RTC_IO_TOUCH_PAD7_SLP_SEL_M, RTC_IO_TOUCH_PAD7_SLP_IE_M, RTC_IO_TOUCH_PAD7_HOLD_M, RTC_CNTL_TOUCH_PAD7_HOLD_FORCE_M, 17}, //27
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //28
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //29
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //30
|
|
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1}, //31
|
|
{RTC_IO_XTAL_32K_PAD_REG, RTC_IO_X32P_MUX_SEL_M, RTC_IO_X32P_FUN_SEL_S, RTC_IO_X32P_FUN_IE_M, RTC_IO_X32P_RUE_M, RTC_IO_X32P_RDE_M, RTC_IO_X32P_SLP_SEL_M, RTC_IO_X32P_SLP_IE_M, RTC_IO_X32P_HOLD_M, RTC_CNTL_X32P_HOLD_FORCE_M, 9}, //32
|
|
{RTC_IO_XTAL_32K_PAD_REG, RTC_IO_X32N_MUX_SEL_M, RTC_IO_X32N_FUN_SEL_S, RTC_IO_X32N_FUN_IE_M, RTC_IO_X32N_RUE_M, RTC_IO_X32N_RDE_M, RTC_IO_X32N_SLP_SEL_M, RTC_IO_X32N_SLP_IE_M, RTC_IO_X32N_HOLD_M, RTC_CNTL_X32N_HOLD_FORCE_M, 8}, //33
|
|
{RTC_IO_ADC_PAD_REG, RTC_IO_ADC1_MUX_SEL_M, RTC_IO_ADC1_FUN_SEL_S, RTC_IO_ADC1_FUN_IE_M, 0, 0, RTC_IO_ADC1_SLP_SEL_M, RTC_IO_ADC1_SLP_IE_M, RTC_IO_ADC1_HOLD_M, RTC_CNTL_ADC1_HOLD_FORCE_M, 4}, //34
|
|
{RTC_IO_ADC_PAD_REG, RTC_IO_ADC2_MUX_SEL_M, RTC_IO_ADC2_FUN_SEL_S, RTC_IO_ADC2_FUN_IE_M, 0, 0, RTC_IO_ADC2_SLP_SEL_M, RTC_IO_ADC2_SLP_IE_M, RTC_IO_ADC1_HOLD_M, RTC_CNTL_ADC2_HOLD_FORCE_M, 5}, //35
|
|
{RTC_IO_SENSOR_PADS_REG, RTC_IO_SENSE1_MUX_SEL_M, RTC_IO_SENSE1_FUN_SEL_S, RTC_IO_SENSE1_FUN_IE_M, 0, 0, RTC_IO_SENSE1_SLP_SEL_M, RTC_IO_SENSE1_SLP_IE_M, RTC_IO_SENSE1_HOLD_M, RTC_CNTL_SENSE1_HOLD_FORCE_M, 0}, //36
|
|
{RTC_IO_SENSOR_PADS_REG, RTC_IO_SENSE2_MUX_SEL_M, RTC_IO_SENSE2_FUN_SEL_S, RTC_IO_SENSE2_FUN_IE_M, 0, 0, RTC_IO_SENSE2_SLP_SEL_M, RTC_IO_SENSE2_SLP_IE_M, RTC_IO_SENSE1_HOLD_M, RTC_CNTL_SENSE2_HOLD_FORCE_M, 1}, //37
|
|
{RTC_IO_SENSOR_PADS_REG, RTC_IO_SENSE3_MUX_SEL_M, RTC_IO_SENSE3_FUN_SEL_S, RTC_IO_SENSE3_FUN_IE_M, 0, 0, RTC_IO_SENSE3_SLP_SEL_M, RTC_IO_SENSE3_SLP_IE_M, RTC_IO_SENSE1_HOLD_M, RTC_CNTL_SENSE3_HOLD_FORCE_M, 2}, //38
|
|
{RTC_IO_SENSOR_PADS_REG, RTC_IO_SENSE4_MUX_SEL_M, RTC_IO_SENSE4_FUN_SEL_S, RTC_IO_SENSE4_FUN_IE_M, 0, 0, RTC_IO_SENSE4_SLP_SEL_M, RTC_IO_SENSE4_SLP_IE_M, RTC_IO_SENSE1_HOLD_M, RTC_CNTL_SENSE4_HOLD_FORCE_M, 3}, //39
|
|
};
|
|
|
|
/*---------------------------------------------------------------
|
|
RTC IO
|
|
---------------------------------------------------------------*/
|
|
esp_err_t rtc_gpio_init(gpio_num_t gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
// 0: GPIO connected to digital GPIO module. 1: GPIO connected to analog RTC module.
|
|
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, (rtc_gpio_desc[gpio_num].mux));
|
|
//0:RTC FUNCIOTN 1,2,3:Reserved
|
|
SET_PERI_REG_BITS(rtc_gpio_desc[gpio_num].reg, RTC_IO_TOUCH_PAD1_FUN_SEL_V, 0x0, rtc_gpio_desc[gpio_num].func);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_deinit(gpio_num_t gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//Select Gpio as Digital Gpio
|
|
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, (rtc_gpio_desc[gpio_num].mux));
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t rtc_gpio_output_enable(gpio_num_t gpio_num)
|
|
{
|
|
int rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;
|
|
RTC_MODULE_CHECK(rtc_gpio_num != -1, "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
SET_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TS_REG, (1 << (rtc_gpio_num + RTC_GPIO_ENABLE_W1TS_S)));
|
|
CLEAR_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TC_REG, (1 << (rtc_gpio_num + RTC_GPIO_ENABLE_W1TC_S)));
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t rtc_gpio_output_disable(gpio_num_t gpio_num)
|
|
{
|
|
int rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;
|
|
RTC_MODULE_CHECK(rtc_gpio_num != -1, "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
CLEAR_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TS_REG, (1 << (rtc_gpio_num + RTC_GPIO_ENABLE_W1TS_S)));
|
|
SET_PERI_REG_MASK(RTC_GPIO_ENABLE_W1TC_REG, (1 << ( rtc_gpio_num + RTC_GPIO_ENABLE_W1TC_S)));
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t rtc_gpio_input_enable(gpio_num_t gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].ie);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t rtc_gpio_input_disable(gpio_num_t gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].ie);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_set_level(gpio_num_t gpio_num, uint32_t level)
|
|
{
|
|
int rtc_gpio_num = rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;;
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
|
|
if (level) {
|
|
WRITE_PERI_REG(RTC_GPIO_OUT_W1TS_REG, (1 << (rtc_gpio_num + RTC_GPIO_OUT_DATA_W1TS_S)));
|
|
} else {
|
|
WRITE_PERI_REG(RTC_GPIO_OUT_W1TC_REG, (1 << (rtc_gpio_num + RTC_GPIO_OUT_DATA_W1TC_S)));
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
uint32_t rtc_gpio_get_level(gpio_num_t gpio_num)
|
|
{
|
|
uint32_t level = 0;
|
|
int rtc_gpio_num = rtc_gpio_desc[gpio_num].rtc_num;
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
level = READ_PERI_REG(RTC_GPIO_IN_REG);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ((level >> (RTC_GPIO_IN_NEXT_S + rtc_gpio_num)) & 0x01);
|
|
}
|
|
|
|
esp_err_t rtc_gpio_set_direction(gpio_num_t gpio_num, rtc_gpio_mode_t mode)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_gpio_is_valid_gpio(gpio_num), "RTC_GPIO number error", ESP_ERR_INVALID_ARG);
|
|
|
|
switch (mode) {
|
|
case RTC_GPIO_MODE_INPUT_ONLY:
|
|
rtc_gpio_output_disable(gpio_num);
|
|
rtc_gpio_input_enable(gpio_num);
|
|
break;
|
|
case RTC_GPIO_MODE_OUTPUT_ONLY:
|
|
rtc_gpio_output_enable(gpio_num);
|
|
rtc_gpio_input_disable(gpio_num);
|
|
break;
|
|
case RTC_GPIO_MODE_INPUT_OUTUT:
|
|
rtc_gpio_output_enable(gpio_num);
|
|
rtc_gpio_input_enable(gpio_num);
|
|
break;
|
|
case RTC_GPIO_MODE_DISABLED:
|
|
rtc_gpio_output_disable(gpio_num);
|
|
rtc_gpio_input_disable(gpio_num);
|
|
break;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_pullup_en(gpio_num_t gpio_num)
|
|
{
|
|
//this is a digital pad
|
|
if (rtc_gpio_desc[gpio_num].pullup == 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
//this is a rtc pad
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pullup);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_pulldown_en(gpio_num_t gpio_num)
|
|
{
|
|
//this is a digital pad
|
|
if (rtc_gpio_desc[gpio_num].pulldown == 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
//this is a rtc pad
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pulldown);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_pullup_dis(gpio_num_t gpio_num)
|
|
{
|
|
//this is a digital pad
|
|
if ( rtc_gpio_desc[gpio_num].pullup == 0 ) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
//this is a rtc pad
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pullup);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_pulldown_dis(gpio_num_t gpio_num)
|
|
{
|
|
//this is a digital pad
|
|
if (rtc_gpio_desc[gpio_num].pulldown == 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
//this is a rtc pad
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].pulldown);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_hold_en(gpio_num_t gpio_num)
|
|
{
|
|
// check if an RTC IO
|
|
if (rtc_gpio_desc[gpio_num].pullup == 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].hold);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t rtc_gpio_hold_dis(gpio_num_t gpio_num)
|
|
{
|
|
// check if an RTC IO
|
|
if (rtc_gpio_desc[gpio_num].pullup == 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(rtc_gpio_desc[gpio_num].reg, rtc_gpio_desc[gpio_num].hold);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
|
|
void rtc_gpio_force_hold_dis_all()
|
|
{
|
|
for (int gpio = 0; gpio < GPIO_PIN_COUNT; ++gpio) {
|
|
const rtc_gpio_desc_t* desc = &rtc_gpio_desc[gpio];
|
|
if (desc->hold_force != 0) {
|
|
REG_CLR_BIT(RTC_CNTL_HOLD_FORCE_REG, desc->hold_force);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*---------------------------------------------------------------
|
|
Touch Pad
|
|
---------------------------------------------------------------*/
|
|
esp_err_t touch_pad_isr_handler_register(void(*fn)(void *), void *arg, int intr_alloc_flags, touch_isr_handle_t *handle)
|
|
{
|
|
RTC_MODULE_CHECK(fn, "Touch_Pad ISR null", ESP_ERR_INVALID_ARG);
|
|
return esp_intr_alloc(ETS_RTC_CORE_INTR_SOURCE, intr_alloc_flags, fn, arg, handle);
|
|
}
|
|
|
|
static esp_err_t touch_pad_get_io_num(touch_pad_t touch_num, gpio_num_t *gpio_num)
|
|
{
|
|
switch (touch_num) {
|
|
case TOUCH_PAD_NUM0:
|
|
*gpio_num = 4;
|
|
break;
|
|
case TOUCH_PAD_NUM1:
|
|
*gpio_num = 0;
|
|
break;
|
|
case TOUCH_PAD_NUM2:
|
|
*gpio_num = 2;
|
|
break;
|
|
case TOUCH_PAD_NUM3:
|
|
*gpio_num = 15;
|
|
break;
|
|
case TOUCH_PAD_NUM4:
|
|
*gpio_num = 13;
|
|
break;
|
|
case TOUCH_PAD_NUM5:
|
|
*gpio_num = 12;
|
|
break;
|
|
case TOUCH_PAD_NUM6:
|
|
*gpio_num = 14;
|
|
break;
|
|
case TOUCH_PAD_NUM7:
|
|
*gpio_num = 27;
|
|
break;
|
|
case TOUCH_PAD_NUM8:
|
|
*gpio_num = 33;
|
|
break;
|
|
case TOUCH_PAD_NUM9:
|
|
*gpio_num = 32;
|
|
break;
|
|
default:
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t touch_pad_init_config(uint16_t sleep_cycle, uint16_t sample_cycle_num)
|
|
{
|
|
xSemaphoreTake(rtc_touch_sem, portMAX_DELAY);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_BITS(RTC_IO_TOUCH_CFG_REG, RTC_IO_TOUCH_XPD_BIAS, 1, RTC_IO_TOUCH_XPD_BIAS_S);
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL2_REG, SENS_TOUCH_MEAS_EN_CLR);
|
|
//clear touch enable
|
|
WRITE_PERI_REG(SENS_SAR_TOUCH_ENABLE_REG, 0x0);
|
|
//enable Rtc Touch pad Timer
|
|
SET_PERI_REG_MASK(RTC_CNTL_STATE0_REG, RTC_CNTL_TOUCH_SLP_TIMER_EN);
|
|
//config pad module sleep time and sample num
|
|
//Touch pad SleepCycle Time = 150Khz
|
|
SET_PERI_REG_BITS(SENS_SAR_TOUCH_CTRL2_REG, SENS_TOUCH_SLEEP_CYCLES, sleep_cycle, SENS_TOUCH_SLEEP_CYCLES_S);//150kHZ
|
|
//Touch Pad Measure Time= 8Mhz
|
|
SET_PERI_REG_BITS(SENS_SAR_TOUCH_CTRL1_REG, SENS_TOUCH_MEAS_DELAY, sample_cycle_num, SENS_TOUCH_MEAS_DELAY_S); //8Mhz
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
xSemaphoreGive(rtc_touch_sem);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_init()
|
|
{
|
|
if(rtc_touch_sem == NULL) {
|
|
rtc_touch_sem = xSemaphoreCreateMutex();
|
|
}
|
|
if(rtc_touch_sem == NULL) {
|
|
return ESP_FAIL;
|
|
}
|
|
return touch_pad_init_config(TOUCH_PAD_SLEEP_CYCLE_CONFIG, TOUCH_PAD_MEASURE_CYCLE_CONFIG);
|
|
}
|
|
|
|
esp_err_t touch_pad_deinit()
|
|
{
|
|
|
|
if(rtc_touch_sem == NULL) {
|
|
return ESP_FAIL;
|
|
}
|
|
vSemaphoreDelete(rtc_touch_sem);
|
|
rtc_touch_sem=NULL;
|
|
return ESP_OK;
|
|
}
|
|
|
|
static void touch_pad_counter_init(touch_pad_t touch_num)
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//Enable Tie,Init Level(Counter)
|
|
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + touch_num * 4, RTC_IO_TOUCH_PAD0_TIE_OPT_M);
|
|
//Touch Set Slop(Counter)
|
|
SET_PERI_REG_BITS(RTC_IO_TOUCH_PAD0_REG + touch_num * 4, RTC_IO_TOUCH_PAD0_DAC_V, 7, RTC_IO_TOUCH_PAD0_DAC_S);
|
|
//Enable Touch Pad IO
|
|
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + touch_num * 4, RTC_IO_TOUCH_PAD0_START_M);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
}
|
|
|
|
static void touch_pad_power_on(touch_pad_t touch_num)
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//Enable Touch Pad Power on
|
|
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + touch_num * 4, RTC_IO_TOUCH_PAD0_XPD_M);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
}
|
|
|
|
static void toch_pad_io_init(touch_pad_t touch_num)
|
|
{
|
|
gpio_num_t gpio_num = GPIO_NUM_0;
|
|
touch_pad_get_io_num(touch_num, &gpio_num);
|
|
rtc_gpio_init(gpio_num);
|
|
rtc_gpio_set_direction(gpio_num, RTC_GPIO_MODE_DISABLED);
|
|
rtc_gpio_pulldown_dis(gpio_num);
|
|
rtc_gpio_pullup_dis(gpio_num);
|
|
}
|
|
|
|
static esp_err_t touch_start(touch_pad_t touch_num)
|
|
{
|
|
RTC_MODULE_CHECK(touch_num < TOUCH_PAD_MAX, "Touch_Pad Num Err", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
|
|
//Enable Digital rtc control :work mode and out mode
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_ENABLE_REG, (1 << (touch_num + SENS_TOUCH_PAD_WORKEN_S)) | \
|
|
(1 << (touch_num + SENS_TOUCH_PAD_OUTEN2_S)) | \
|
|
(1 << (touch_num + SENS_TOUCH_PAD_OUTEN1_S)));
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_config(touch_pad_t touch_num, uint16_t threshold)
|
|
{
|
|
RTC_MODULE_CHECK(rtc_touch_sem != NULL, "Touch pad not initialized", ESP_FAIL);
|
|
RTC_MODULE_CHECK(touch_num < TOUCH_PAD_MAX, "Touch_Pad Num Err", ESP_ERR_INVALID_ARG);
|
|
xSemaphoreTake(rtc_touch_sem, portMAX_DELAY);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//clear touch force ,select the Touch mode is Timer
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL2_REG, SENS_TOUCH_START_EN_M);
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL2_REG, SENS_TOUCH_START_FORCE_M);
|
|
//set threshold
|
|
uint8_t shift;
|
|
shift = (touch_num & 1) ? SENS_TOUCH_OUT_TH1_S : SENS_TOUCH_OUT_TH0_S;
|
|
SET_PERI_REG_BITS((SENS_SAR_TOUCH_THRES1_REG + (touch_num / 2) * 4), SENS_TOUCH_OUT_TH0, threshold, shift);
|
|
//When touch value < threshold ,the Intr will give
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL1_REG, SENS_TOUCH_OUT_SEL);
|
|
//Intr will give ,when SET0 < threshold
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL1_REG, SENS_TOUCH_OUT_1EN);
|
|
//Enable Rtc Touch Module Intr,the Interrupt need Rtc out Enable
|
|
SET_PERI_REG_MASK(RTC_CNTL_INT_ENA_REG, RTC_CNTL_TOUCH_INT_ENA);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
xSemaphoreGive(rtc_touch_sem);
|
|
touch_pad_power_on(touch_num);
|
|
toch_pad_io_init(touch_num);
|
|
touch_pad_counter_init(touch_num);
|
|
touch_start(touch_num);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t touch_pad_read(touch_pad_t touch_num, uint16_t *touch_value)
|
|
{
|
|
RTC_MODULE_CHECK(touch_num < TOUCH_PAD_MAX, "Touch_Pad Num Err", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(touch_value != NULL, "touch_value", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(rtc_touch_sem != NULL, "Touch pad not initialized", ESP_FAIL);
|
|
xSemaphoreTake(rtc_touch_sem, portMAX_DELAY);
|
|
uint32_t v0 = READ_PERI_REG(SENS_SAR_TOUCH_ENABLE_REG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_ENABLE_REG, (1 << (touch_num)));
|
|
//Disable Intr
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_TOUCH_ENABLE_REG, (1 << (touch_num + SENS_TOUCH_PAD_OUTEN2_S)) | \
|
|
((1 << (touch_num + SENS_TOUCH_PAD_OUTEN1_S))));
|
|
toch_pad_io_init(touch_num);
|
|
touch_pad_counter_init(touch_num);
|
|
touch_pad_power_on(touch_num);
|
|
//force oneTime test start
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL2_REG, SENS_TOUCH_START_EN_M);
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL2_REG, SENS_TOUCH_START_FORCE_M);
|
|
SET_PERI_REG_BITS(SENS_SAR_TOUCH_CTRL1_REG, SENS_TOUCH_XPD_WAIT, 10, SENS_TOUCH_XPD_WAIT_S);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
while (GET_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL2_REG, SENS_TOUCH_MEAS_DONE) == 0) {};
|
|
uint8_t shift = (touch_num & 1) ? SENS_TOUCH_MEAS_OUT1_S : SENS_TOUCH_MEAS_OUT0_S;
|
|
*touch_value = READ_PERI_REG(SENS_SAR_TOUCH_OUT1_REG + (touch_num / 2) * 4) >> shift;
|
|
WRITE_PERI_REG(SENS_SAR_TOUCH_ENABLE_REG, v0);
|
|
//force oneTime test end
|
|
//clear touch force ,select the Touch mode is Timer
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL2_REG, SENS_TOUCH_START_EN_M);
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL2_REG, SENS_TOUCH_START_FORCE_M);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
xSemaphoreGive(rtc_touch_sem);
|
|
return ESP_OK;
|
|
}
|
|
|
|
/*---------------------------------------------------------------
|
|
ADC
|
|
---------------------------------------------------------------*/
|
|
static esp_err_t adc1_pad_get_io_num(adc1_channel_t channel, gpio_num_t *gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(channel < ADC1_CHANNEL_MAX, "ADC Channel Err", ESP_ERR_INVALID_ARG);
|
|
|
|
switch (channel) {
|
|
case ADC1_CHANNEL_0:
|
|
*gpio_num = 36;
|
|
break;
|
|
case ADC1_CHANNEL_1:
|
|
*gpio_num = 37;
|
|
break;
|
|
case ADC1_CHANNEL_2:
|
|
*gpio_num = 38;
|
|
break;
|
|
case ADC1_CHANNEL_3:
|
|
*gpio_num = 39;
|
|
break;
|
|
case ADC1_CHANNEL_4:
|
|
*gpio_num = 32;
|
|
break;
|
|
case ADC1_CHANNEL_5:
|
|
*gpio_num = 33;
|
|
break;
|
|
case ADC1_CHANNEL_6:
|
|
*gpio_num = 34;
|
|
break;
|
|
case ADC1_CHANNEL_7:
|
|
*gpio_num = 35;
|
|
break;
|
|
default:
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t adc1_pad_init(adc1_channel_t channel)
|
|
{
|
|
gpio_num_t gpio_num = 0;
|
|
ADC1_CHECK_FUNCTION_RET(adc1_pad_get_io_num(channel, &gpio_num));
|
|
ADC1_CHECK_FUNCTION_RET(rtc_gpio_init(gpio_num));
|
|
ADC1_CHECK_FUNCTION_RET(rtc_gpio_output_disable(gpio_num));
|
|
ADC1_CHECK_FUNCTION_RET(rtc_gpio_input_disable(gpio_num));
|
|
ADC1_CHECK_FUNCTION_RET(gpio_set_pull_mode(gpio_num, GPIO_FLOATING));
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t adc1_config_channel_atten(adc1_channel_t channel, adc_atten_t atten)
|
|
{
|
|
RTC_MODULE_CHECK(channel < ADC1_CHANNEL_MAX, "ADC Channel Err", ESP_ERR_INVALID_ARG);
|
|
RTC_MODULE_CHECK(atten <= ADC_ATTEN_11db, "ADC Atten Err", ESP_ERR_INVALID_ARG);
|
|
adc1_pad_init(channel);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_BITS(SENS_SAR_ATTEN1_REG, 3, atten, (channel * 2)); //SAR1_atten
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t adc1_config_width(adc_bits_width_t width_bit)
|
|
{
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_BITS(SENS_SAR_START_FORCE_REG, SENS_SAR1_BIT_WIDTH_V, width_bit, SENS_SAR1_BIT_WIDTH_S); //SAR2_BIT_WIDTH[1:0]=0x3, SAR1_BIT_WIDTH[1:0]=0x3
|
|
//Invert the adc value,the Output value is invert
|
|
SET_PERI_REG_MASK(SENS_SAR_READ_CTRL_REG, SENS_SAR1_DATA_INV);
|
|
//Set The adc sample width,invert adc value,must
|
|
SET_PERI_REG_BITS(SENS_SAR_READ_CTRL_REG, SENS_SAR1_SAMPLE_BIT_V, width_bit, SENS_SAR1_SAMPLE_BIT_S); //digital sar1_bit_width[1:0]=3
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
int adc1_get_voltage(adc1_channel_t channel)
|
|
{
|
|
uint16_t adc_value;
|
|
|
|
RTC_MODULE_CHECK(channel < ADC1_CHANNEL_MAX, "ADC Channel Err", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//Adc Controler is Rtc module,not ulp coprocessor
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START1_REG, 1, 1, SENS_MEAS1_START_FORCE_S); //force pad mux and force start
|
|
//Bit1=0:Fsm Bit1=1(Bit0=0:PownDown Bit10=1:Powerup)
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_FORCE_XPD_SAR, 0, SENS_FORCE_XPD_SAR_S); //force XPD_SAR=0, use XPD_FSM
|
|
//Disable Amp Bit1=0:Fsm Bit1=1(Bit0=0:PownDown Bit10=1:Powerup)
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_FORCE_XPD_AMP, 0x2, SENS_FORCE_XPD_AMP_S); //force XPD_AMP=0
|
|
//Open the ADC1 Data port Not ulp coprocessor
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START1_REG, 1, 1, SENS_SAR1_EN_PAD_FORCE_S); //open the ADC1 data port
|
|
//Select channel
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START1_REG, SENS_SAR1_EN_PAD, (1 << channel), SENS_SAR1_EN_PAD_S); //pad enable
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_CTRL_REG, 0xfff, 0x0, SENS_AMP_RST_FB_FSM_S); //[11:8]:short ref ground, [7:4]:short ref, [3:0]:rst fb
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT1_REG, SENS_SAR_AMP_WAIT1, 0x1, SENS_SAR_AMP_WAIT1_S);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT1_REG, SENS_SAR_AMP_WAIT2, 0x1, SENS_SAR_AMP_WAIT2_S);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_SAR_AMP_WAIT3, 0x1, SENS_SAR_AMP_WAIT3_S);
|
|
while (GET_PERI_REG_BITS2(SENS_SAR_SLAVE_ADDR1_REG, 0x7, SENS_MEAS_STATUS_S) != 0); //wait det_fsm==0
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START1_REG, 1, 0, SENS_MEAS1_START_SAR_S); //start force 0
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_START1_REG, 1, 1, SENS_MEAS1_START_SAR_S); //start force 1
|
|
while (GET_PERI_REG_MASK(SENS_SAR_MEAS_START1_REG, SENS_MEAS1_DONE_SAR) == 0) {}; //read done
|
|
adc_value = GET_PERI_REG_BITS2(SENS_SAR_MEAS_START1_REG, SENS_MEAS1_DATA_SAR, SENS_MEAS1_DATA_SAR_S);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
|
|
return adc_value;
|
|
}
|
|
|
|
/*---------------------------------------------------------------
|
|
DAC
|
|
---------------------------------------------------------------*/
|
|
static esp_err_t dac_pad_get_io_num(dac_channel_t channel, gpio_num_t *gpio_num)
|
|
{
|
|
RTC_MODULE_CHECK(channel < DAC_CHANNEL_MAX, "DAC Channel Err", ESP_ERR_INVALID_ARG);
|
|
|
|
switch (channel) {
|
|
case DAC_CHANNEL_1:
|
|
*gpio_num = 25;
|
|
break;
|
|
case DAC_CHANNEL_2:
|
|
*gpio_num = 26;
|
|
break;
|
|
default:
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t dac_rtc_pad_init(dac_channel_t channel)
|
|
{
|
|
RTC_MODULE_CHECK(channel < DAC_CHANNEL_MAX, "DAC Channel Err", ESP_ERR_INVALID_ARG);
|
|
gpio_num_t gpio_num = 0;
|
|
dac_pad_get_io_num(channel, &gpio_num);
|
|
rtc_gpio_init(gpio_num);
|
|
rtc_gpio_output_disable(gpio_num);
|
|
rtc_gpio_input_disable(gpio_num);
|
|
rtc_gpio_pullup_dis(gpio_num);
|
|
rtc_gpio_pulldown_dis(gpio_num);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t dac_out_enable(dac_channel_t channel)
|
|
{
|
|
if (channel == DAC_CHANNEL_1) {
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(RTC_IO_PAD_DAC1_REG, RTC_IO_PDAC1_XPD_DAC | RTC_IO_PDAC1_DAC_XPD_FORCE);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
} else if (channel == DAC_CHANNEL_2) {
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(RTC_IO_PAD_DAC2_REG, RTC_IO_PDAC2_XPD_DAC | RTC_IO_PDAC2_DAC_XPD_FORCE);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
} else {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t dac_out_voltage(dac_channel_t channel, uint8_t dac_value)
|
|
{
|
|
RTC_MODULE_CHECK(channel < DAC_CHANNEL_MAX, "DAC Channel Err", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
//Disable Tone
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL1_REG, SENS_SW_TONE_EN);
|
|
|
|
//Disable Channel Tone
|
|
if (channel == DAC_CHANNEL_1) {
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL2_REG, SENS_DAC_CW_EN1_M);
|
|
} else if (channel == DAC_CHANNEL_2) {
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_DAC_CTRL2_REG, SENS_DAC_CW_EN2_M);
|
|
}
|
|
|
|
//Set the Dac value
|
|
if (channel == DAC_CHANNEL_1) {
|
|
SET_PERI_REG_BITS(RTC_IO_PAD_DAC1_REG, RTC_IO_PDAC1_DAC, dac_value, RTC_IO_PDAC1_DAC_S); //dac_output
|
|
} else if (channel == DAC_CHANNEL_2) {
|
|
SET_PERI_REG_BITS(RTC_IO_PAD_DAC2_REG, RTC_IO_PDAC2_DAC, dac_value, RTC_IO_PDAC2_DAC_S); //dac_output
|
|
}
|
|
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
//dac pad init
|
|
dac_rtc_pad_init(channel);
|
|
dac_out_enable(channel);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
/*---------------------------------------------------------------
|
|
HALL SENSOR
|
|
---------------------------------------------------------------*/
|
|
static int hall_sensor_get_value() //hall sensor without LNA
|
|
{
|
|
int Sens_Vp0;
|
|
int Sens_Vn0;
|
|
int Sens_Vp1;
|
|
int Sens_Vn1;
|
|
int hall_value;
|
|
|
|
portENTER_CRITICAL(&rtc_spinlock);
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL1_REG, SENS_XPD_HALL_FORCE_M); // hall sens force enable
|
|
SET_PERI_REG_MASK(RTC_IO_HALL_SENS_REG, RTC_IO_XPD_HALL); // xpd hall
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL1_REG, SENS_HALL_PHASE_FORCE_M); // phase force
|
|
CLEAR_PERI_REG_MASK(RTC_IO_HALL_SENS_REG, RTC_IO_HALL_PHASE); // hall phase
|
|
Sens_Vp0 = adc1_get_voltage(ADC1_CHANNEL_0);
|
|
Sens_Vn0 = adc1_get_voltage(ADC1_CHANNEL_3);
|
|
SET_PERI_REG_MASK(RTC_IO_HALL_SENS_REG, RTC_IO_HALL_PHASE);
|
|
Sens_Vp1 = adc1_get_voltage(ADC1_CHANNEL_0);
|
|
Sens_Vn1 = adc1_get_voltage(ADC1_CHANNEL_3);
|
|
SET_PERI_REG_BITS(SENS_SAR_MEAS_WAIT2_REG, SENS_FORCE_XPD_SAR, 0, SENS_FORCE_XPD_SAR_S);
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL1_REG, SENS_XPD_HALL_FORCE);
|
|
CLEAR_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL1_REG, SENS_HALL_PHASE_FORCE);
|
|
portEXIT_CRITICAL(&rtc_spinlock);
|
|
hall_value = (Sens_Vp1 - Sens_Vp0) - (Sens_Vn1 - Sens_Vn0);
|
|
|
|
return hall_value;
|
|
}
|
|
|
|
int hall_sensor_read()
|
|
{
|
|
adc1_pad_init(ADC1_CHANNEL_0);
|
|
adc1_pad_init(ADC1_CHANNEL_3);
|
|
adc1_config_channel_atten(ADC1_CHANNEL_0, ADC_ATTEN_0db);
|
|
adc1_config_channel_atten(ADC1_CHANNEL_3, ADC_ATTEN_0db);
|
|
return hall_sensor_get_value();
|
|
}
|