OVMS3-idf/components/freertos/Kconfig
2016-08-17 23:08:22 +08:00

125 lines
3.7 KiB
Text

menu "FreeRTOS"
# This is actually also handled in the ESP32 startup code, not only in FreeRTOS.
config FREERTOS_UNICORE
bool "Run FreeRTOS only on first core"
default n
help
This version of FreeRTOS normally takes control of all cores of
the CPU. Select this if you only want to start it on the first core.
This is needed when e.g. another process needs complete control
over the second core.
choice FREERTOS_CORETIMER
prompt "Xtensa timer to use as the FreeRTOS tick source"
default CONFIG_FREERTOS_CORETIMER_0
help
FreeRTOS needs a timer with an associated interrupt to use as
the main tick source to increase counters, run timers and do
pre-emptive multitasking with. There are multiple timers available
to do this, with different interrupt priorities. Check
config FREERTOS_CORETIMER_0
bool "Timer 0 (int 6, level 1)"
help
Select this to use timer 0
config FREERTOS_CORETIMER_1
bool "Timer 1 (int 15, level 3)"
help
Select this to use timer 1
config FREERTOS_CORETIMER_2
bool "Timer 2 (int 16, level 5)"
help
Select this to use timer 2
endchoice
config FREERTOS_HZ
int "Tick rate (Hz)"
range 1 10000
default 100
help
Select the tick rate at which FreeRTOS does pre-emptive context switching.
choice FREERTOS_CHECK_STACKOVERFLOW
prompt "Check for stack overflow"
default FREERTOS_CHECK_STACKOVERFLOW_QUICK
help
FreeRTOS can check for stack overflows in threads and trigger an user function
called vApplicationStackOverflowHook when this happens.
config FREERTOS_CHECK_STACKOVERFLOW_NONE
bool "No checking"
help
Do not check for stack overflows (configCHECK_FOR_STACK_OVERFLOW=0)
config FREERTOS_CHECK_STACKOVERFLOW_PTRVAL
bool "Check by stack pointer value"
help
Check for stack overflows on each context switch by checking if
the stack pointer is in a valid range. Quick but does not detect
stack overflows that happened between context switches
(configCHECK_FOR_STACK_OVERFLOW=1)
config FREERTOS_CHECK_STACKOVERFLOW_CANARY
bool "Check using canary bytes"
help
Places some magic bytes at the end of the stack area and on each
context switch, check if these bytes are still intact. More thorough
than just checking the pointer, but also slightly slower.
(configCHECK_FOR_STACK_OVERFLOW=2)
endchoice
config CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS
int "Amount of thread local storage pointers"
range 0 256
default 0
help
FreeRTOS has the ability to store per-thread pointers in the task
control block. This controls the amount of pointers available;
0 turns off this functionality.
#This still needs to be implemented.
choice FREERTOS_PANIC
prompt "Panic handler behaviour"
default FREERTOS_PANIC_PRINT_REBOOT
help
If FreeRTOS detects unexpected behaviour or an unhandled exception, the panic handler is
invoked. Configure the panic handlers action here.
config FREERTOS_PANIC_PRINT_HALT
bool "Print registers and halt"
help
Outputs the relevant registers over the serial port and halt the
processor. Needs a manual reset to restart.
config FREERTOS_PANIC_PRINT_REBOOT
bool "Print registers and reboot"
help
Outputs the relevant registers over the serial port and immediately
reset the processor.
config FREERTOS_PANIC_SILENT_REBOOT
bool "Silent reboot"
help
Just resets the processor without outputting anything
config FREERTOS_PANIC_GDBSTUB
bool "Invoke GDBStub"
help
Invoke gdbstub on the serial port, allowing for gdb to attach to it to do a postmortem
of the crash.
endchoice
config FREERTOS_DEBUG_OCDAWARE
bool "Make exception and panic handlers JTAG/OCD aware"
default y
help
The FreeRTOS panic and unhandled exception handers can detect a JTAG OCD debugger and
instead of panicking, have the debugger stop on the offending instruction.
endmenu