OVMS3-idf/components/mbedtls/port/include/esp32s2/sha.h
Marius Vikhammer 37369a8a57 crypto: SHA and AES accelerator bring up for S2
Brings up, fixes and enables AES and SHA hardware acceleration.

Closes IDF-714
Closes IDF-716
2020-03-11 15:09:45 +08:00

168 lines
5.2 KiB
C

// Copyright 2019-2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _ESP_SHA_H_
#define _ESP_SHA_H_
#include "esp32s2/rom/sha.h"
/** @brief Low-level support functions for the hardware SHA engine using DMA
*
* @note If you're looking for a SHA API to use, try mbedtls component
* mbedtls/shaXX.h. That API supports hardware acceleration.
*
* The API in this header provides some building blocks for implementing a
* full SHA API such as the one in mbedtls, and also a basic SHA function esp_sha().
*
* Some technical details about the hardware SHA engine:
*
* - The crypto DMA is shared between the SHA and AES engine, it is not
* possible for them to run calcalutions in parallel.
*
*/
#ifdef __cplusplus
extern "C" {
#endif
/* Defined in rom/sha.h */
typedef SHA_TYPE esp_sha_type;
/** @brief Calculate SHA1 or SHA2 sum of some data, using hardware SHA engine
*
* @note For more versatile SHA calculations, where data doesn't need
* to be passed all at once, try the mbedTLS mbedtls/shaX.h APIs.
*
* @note It is not necessary to lock any SHA hardware before calling
* this function, thread safety is managed internally.
*
* @param sha_type SHA algorithm to use.
*
* @param input Input data buffer.
*
* @param ilen Length of input data in bytes.
*
* @param output Buffer for output SHA digest. Output is 20 bytes for
* sha_type SHA1, 32 bytes for sha_type SHA2_256, 48 bytes for
* sha_type SHA2_384, 64 bytes for sha_type SHA2_512.
*/
void esp_sha(esp_sha_type sha_type, const unsigned char *input, size_t ilen, unsigned char *output);
/** @brief Execute SHA block operation using DMA
*
* @note This is a piece of a SHA algorithm, rather than an entire SHA
* algorithm.
*
* @note Call esp_sha_aquire_hardware() before calling this
* function.
*
* @param sha_type SHA algorithm to use.
*
* @param input Pointer to the input data. Block size is
* determined by algorithm (SHA1/SHA2_256 = 64 bytes,
* SHA2_384/SHA2_512 = 128 bytes)
*
* @param ilen length of input data should be multiple of block length.
*
* @param buf Pointer to blocks of data that will be prepended
* to data_block before hashing. Useful when there is two sources of
* data that need to be efficiently calculated in a single SHA DMA
* operation.
*
* @param buf_len length of buf data should be multiple of block length.
* Should not be longer than the maximum amount of bytes in a single block
* (128 bytes)
*
* @param is_first_block If this parameter is true, the SHA state will
* be initialised (with the initial state of the given SHA algorithm)
* before the block is calculated. If false, the existing state of the
* SHA engine will be used.
*
* @param t The number of bits for the SHA512/t hash function, with
* output truncated to t bits. Used for calculating the inital hash.
* t is any positive integer between 1 and 512, except 384.
*
* @return 0 if successful
*/
int esp_sha_dma(esp_sha_type sha_type, const void *input, uint32_t ilen,
const void *buf, uint32_t buf_len, bool is_first_block);
/**
* @brief Read out the current state of the SHA digest
*
* @note This is a piece of a SHA algorithm, rather than an entire SHA algorithm.
*
* @note Call esp_sha_aquire_hardware() before calling this
* function.
*
* If the SHA suffix padding block has been executed already, the
* value that is read is the SHA digest.
* Otherwise, the value that is read is an interim SHA state.
*
* @param sha_type SHA algorithm in use.
* @param digest_state Pointer to a memory buffer to hold the SHA state. Size
* is 20 bytes (SHA1), 32 bytes (SHA2_256), or 64 bytes (SHA2_384, SHA2_512).
*/
void esp_sha_read_digest_state(esp_sha_type sha_type, void *digest_state);
/**
* @brief Set the current state of the SHA digest
*
* @note Call esp_sha_aquire_hardware() before calling this
* function.
*
* When resuming a
*
* @param sha_type SHA algorithm in use.
* @param digest_state
*/
void esp_sha_write_digest_state(esp_sha_type sha_type, void *digest_state);
/**
* @brief Enables the SHA and crypto DMA peripheral and takes the
* locks for both of them.
*/
void esp_sha_acquire_hardware(void);
/**
* @brief Disables the SHA and crypto DMA peripheral and releases the
* locks.
*/
void esp_sha_release_hardware(void);
/*
*/
/**
* @brief Sets the initial hash value for SHA512/t.
*
* @note Is generated according to the algorithm described in the TRM,
* chapter SHA-Accelerator
*
* @note The engine must be locked until the value is used for an operation
* or read out. Else you risk another operation overwriting it.
*
* @param t
*
* @return 0 if successful
*/
int esp_sha_512_t_init_hash(uint16_t t);
#ifdef __cplusplus
}
#endif
#endif