OVMS3-idf/examples/peripherals/uart/main/uart_test.c

183 lines
6.6 KiB
C

/* Uart Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_system.h"
#include "nvs_flash.h"
#include "driver/uart.h"
#include "freertos/queue.h"
#include "esp_log.h"
#include "soc/uart_struct.h"
static const char *TAG = "uart_example";
/**
* Test code brief
* This example shows how to configure uart settings and install uart driver.
*
* uart_evt_test() is an example that read and write data on UART0, and handler some of the special events.
* - port: UART0
* - rx buffer: on
* - tx buffer: on
* - flow control: off
* - event queue: on
* - pin assignment: txd(default), rxd(default)
*
* uart_echo_test() is an example that read and write data on UART1, with hardware flow control turning on.
* - port: UART1
* - rx buffer: on
* - tx buffer: off
* - flow control: on
* - event queue: off
* - pin assignment: txd(io4), rxd(io5), rts(18), cts(19)
*/
#define BUF_SIZE (1024)
#define ECHO_TEST_TXD (4)
#define ECHO_TEST_RXD (5)
#define ECHO_TEST_RTS (18)
#define ECHO_TEST_CTS (19)
QueueHandle_t uart0_queue;
void uart_task(void *pvParameters)
{
int uart_num = (int) pvParameters;
uart_event_t event;
size_t buffered_size;
uint8_t* dtmp = (uint8_t*) malloc(BUF_SIZE);
for(;;) {
//Waiting for UART event.
if(xQueueReceive(uart0_queue, (void * )&event, (portTickType)portMAX_DELAY)) {
ESP_LOGI(TAG, "uart[%d] event:", uart_num);
switch(event.type) {
//Event of UART receving data
/*We'd better handler data event fast, there would be much more data events than
other types of events. If we take too much time on data event, the queue might
be full.
in this example, we don't process data in event, but read data outside.*/
case UART_DATA:
uart_get_buffered_data_len(uart_num, &buffered_size);
ESP_LOGI(TAG, "data, len: %d; buffered len: %d", event.size, buffered_size);
break;
//Event of HW FIFO overflow detected
case UART_FIFO_OVF:
ESP_LOGI(TAG, "hw fifo overflow\n");
//If fifo overflow happened, you should consider adding flow control for your application.
//We can read data out out the buffer, or directly flush the rx buffer.
uart_flush(uart_num);
break;
//Event of UART ring buffer full
case UART_BUFFER_FULL:
ESP_LOGI(TAG, "ring buffer full\n");
//If buffer full happened, you should consider encreasing your buffer size
//We can read data out out the buffer, or directly flush the rx buffer.
uart_flush(uart_num);
break;
//Event of UART RX break detected
case UART_BREAK:
ESP_LOGI(TAG, "uart rx break\n");
break;
//Event of UART parity check error
case UART_PARITY_ERR:
ESP_LOGI(TAG, "uart parity error\n");
break;
//Event of UART frame error
case UART_FRAME_ERR:
ESP_LOGI(TAG, "uart frame error\n");
break;
//UART_PATTERN_DET
case UART_PATTERN_DET:
ESP_LOGI(TAG, "uart pattern detected\n");
break;
//Others
default:
ESP_LOGI(TAG, "uart event type: %d\n", event.type);
break;
}
}
}
free(dtmp);
dtmp = NULL;
vTaskDelete(NULL);
}
void uart_evt_test()
{
int uart_num = UART_NUM_0;
uart_config_t uart_config = {
.baud_rate = 115200,
.data_bits = UART_DATA_8_BITS,
.parity = UART_PARITY_DISABLE,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
.rx_flow_ctrl_thresh = 122,
};
//Set UART parameters
uart_param_config(uart_num, &uart_config);
//Set UART log level
esp_log_level_set(TAG, ESP_LOG_INFO);
//Install UART driver, and get the queue.
uart_driver_install(uart_num, BUF_SIZE * 2, BUF_SIZE * 2, 10, &uart0_queue, 0);
//Set UART pins,(-1: default pin, no change.)
//For UART0, we can just use the default pins.
//uart_set_pin(uart_num, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
//Set uart pattern detect function.
uart_enable_pattern_det_intr(uart_num, '+', 3, 10000, 10, 10);
//Create a task to handler UART event from ISR
xTaskCreate(uart_task, "uart_task", 2048, (void*)uart_num, 12, NULL);
//process data
uint8_t* data = (uint8_t*) malloc(BUF_SIZE);
do {
int len = uart_read_bytes(uart_num, data, BUF_SIZE, 100 / portTICK_RATE_MS);
if(len > 0) {
ESP_LOGI(TAG, "uart read : %d", len);
uart_write_bytes(uart_num, (const char*)data, len);
}
} while(1);
}
//an example of echo test with hardware flow control on UART1
void uart_echo_test()
{
int uart_num = UART_NUM_1;
uart_config_t uart_config = {
.baud_rate = 115200,
.data_bits = UART_DATA_8_BITS,
.parity = UART_PARITY_DISABLE,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_CTS_RTS,
.rx_flow_ctrl_thresh = 122,
};
//Configure UART1 parameters
uart_param_config(uart_num, &uart_config);
//Set UART1 pins(TX: IO4, RX: I05, RTS: IO18, CTS: IO19)
uart_set_pin(uart_num, ECHO_TEST_TXD, ECHO_TEST_RXD, ECHO_TEST_RTS, ECHO_TEST_CTS);
//Install UART driver( We don't need an event queue here)
//In this example we don't even use a buffer for sending data.
uart_driver_install(uart_num, BUF_SIZE * 2, 0, 0, NULL, 0);
uint8_t* data = (uint8_t*) malloc(BUF_SIZE);
while(1) {
//Read data from UART
int len = uart_read_bytes(uart_num, data, BUF_SIZE, 20 / portTICK_RATE_MS);
//Write data back to UART
uart_write_bytes(uart_num, (const char*) data, len);
}
}
void app_main()
{
//A uart read/write example without event queue;
xTaskCreate(uart_echo_test, "uart_echo_test", 1024, NULL, 10, NULL);
//A uart example with event queue.
uart_evt_test();
}