1037 lines
41 KiB
C
1037 lines
41 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#include <string.h>
|
|
#include <stdio.h>
|
|
#include "esp_types.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_intr.h"
|
|
#include "esp_log.h"
|
|
#include "malloc.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/semphr.h"
|
|
#include "freertos/xtensa_api.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/ringbuf.h"
|
|
#include "soc/dport_reg.h"
|
|
#include "soc/i2c_struct.h"
|
|
#include "soc/i2c_reg.h"
|
|
#include "driver/i2c.h"
|
|
#include "driver/gpio.h"
|
|
#include "driver/periph_ctrl.h"
|
|
|
|
static const char* I2C_TAG = "i2c";
|
|
#define I2C_CHECK(a, str, ret) if(!(a)) { \
|
|
ESP_LOGE(I2C_TAG,"%s:%d (%s):%s", __FILE__, __LINE__, __FUNCTION__, str); \
|
|
return (ret); \
|
|
}
|
|
|
|
static portMUX_TYPE i2c_spinlock[I2C_NUM_MAX] = {portMUX_INITIALIZER_UNLOCKED, portMUX_INITIALIZER_UNLOCKED};
|
|
/* DRAM_ATTR is required to avoid I2C array placed in flash, due to accessed from ISR */
|
|
static DRAM_ATTR i2c_dev_t* const I2C[I2C_NUM_MAX] = { &I2C0, &I2C1 };
|
|
|
|
|
|
#define I2C_ENTER_CRITICAL_ISR(mux) portENTER_CRITICAL_ISR(mux)
|
|
#define I2C_EXIT_CRITICAL_ISR(mux) portEXIT_CRITICAL_ISR(mux)
|
|
#define I2C_ENTER_CRITICAL(mux) portENTER_CRITICAL(mux)
|
|
#define I2C_EXIT_CRITICAL(mux) portEXIT_CRITICAL(mux)
|
|
|
|
#define I2C_DRIVER_ERR_STR "i2c driver install error"
|
|
#define I2C_DRIVER_MALLOC_ERR_STR "i2c driver malloc error"
|
|
#define I2C_NUM_ERROR_STR "i2c number error"
|
|
#define I2C_ADDR_ERROR_STR "i2c null address error"
|
|
#define I2C_DRIVER_NOT_INSTALL_ERR_STR "i2c driver not installed"
|
|
#define I2C_SLAVE_BUFFER_LEN_ERR_STR "i2c buffer size too short for slave mode"
|
|
#define I2C_EVT_QUEUE_ERR_STR "i2c evt queue error"
|
|
#define I2C_SEM_ERR_STR "i2c semaphore error"
|
|
#define I2C_BUF_ERR_STR "i2c ringbuffer error"
|
|
#define I2C_MASTER_MODE_ERR_STR "Only allowed in master mode"
|
|
#define I2C_MODE_SLAVE_ERR_STR "Only allowed in slave mode"
|
|
#define I2C_CMD_MALLOC_ERR_STR "i2c command link malloc error"
|
|
#define I2C_TRANS_MODE_ERR_STR "i2c trans mode error"
|
|
#define I2C_MODE_ERR_STR "i2c mode error"
|
|
#define I2C_SDA_IO_ERR_STR "sda gpio number error"
|
|
#define I2C_SCL_IO_ERR_STR "scl gpio number error"
|
|
#define I2C_CMD_LINK_INIT_ERR_STR "i2c command link error"
|
|
#define I2C_GPIO_PULLUP_ERR_STR "this i2c pin do not support internal pull-up"
|
|
#define I2C_FIFO_FULL_THRESH_VAL (28)
|
|
#define I2C_FIFO_EMPTY_THRESH_VAL (5)
|
|
|
|
typedef struct {
|
|
uint8_t byte_num; /*!< cmd byte number */
|
|
uint8_t ack_en; /*!< ack check enable */
|
|
uint8_t ack_exp; /*!< expected ack level to get */
|
|
uint8_t ack_val; /*!< ack value to send */
|
|
uint8_t* data; /*!< data address */
|
|
uint8_t byte_cmd; /*!< to save cmd for one byte command mode */
|
|
i2c_opmode_t op_code; /*!< haredware cmd type */
|
|
}i2c_cmd_t;
|
|
|
|
typedef struct i2c_cmd_link{
|
|
i2c_cmd_t cmd; /*!< command in current cmd link */
|
|
struct i2c_cmd_link *next; /*!< next cmd link */
|
|
} i2c_cmd_link_t;
|
|
|
|
typedef struct {
|
|
i2c_cmd_link_t* head; /*!< head of the command link */
|
|
i2c_cmd_link_t* cur; /*!< last node of the command link */
|
|
i2c_cmd_link_t* free; /*!< the first node to free of the command link */
|
|
} i2c_cmd_desc_t;
|
|
|
|
typedef enum {
|
|
I2C_STATUS_READ, /*!< read status for current master command */
|
|
I2C_STATUS_WRITE, /*!< write status for current master command */
|
|
I2C_STATUS_IDLE, /*!< idle status for current master command */
|
|
I2C_STATUS_ACK_ERROR, /*!< ack error status for current master command */
|
|
I2C_STATUS_DONE, /*!< I2C command done */
|
|
} i2c_status_t;
|
|
|
|
typedef struct {
|
|
int i2c_num; /*!< I2C port number */
|
|
int mode; /*!< I2C mode, master or slave */
|
|
intr_handle_t intr_handle; /*!< I2C interrupt handle*/
|
|
|
|
int cmd_idx; /*!< record current command index, for master mode */
|
|
int status; /*!< record current command status, for master mode */
|
|
int rx_cnt; /*!< record current read index, for master mode */
|
|
uint8_t data_buf[I2C_FIFO_LEN]; /*!< a buffer to store i2c fifo data */
|
|
i2c_cmd_desc_t cmd_link; /*!< I2C command link */
|
|
xSemaphoreHandle cmd_sem; /*!< semaphore to sync command status */
|
|
xSemaphoreHandle cmd_mux; /*!< semaphore to lock command process */
|
|
size_t tx_fifo_remain; /*!< tx fifo remain length, for master mode */
|
|
size_t rx_fifo_remain; /*!< rx fifo remain length, for master mode */
|
|
|
|
xSemaphoreHandle slv_rx_mux; /*!< slave rx buffer mux */
|
|
xSemaphoreHandle slv_tx_mux; /*!< slave tx buffer mux */
|
|
size_t rx_buf_length; /*!< rx buffer length */
|
|
RingbufHandle_t rx_ring_buf; /*!< rx ringbuffer handler of slave mode */
|
|
size_t tx_buf_length; /*!< tx buffer length */
|
|
RingbufHandle_t tx_ring_buf; /*!< tx ringbuffer handler of slave mode */
|
|
} i2c_obj_t;
|
|
|
|
static i2c_obj_t *p_i2c_obj[I2C_NUM_MAX] = {0};
|
|
static void i2c_isr_handler_default(void* arg);
|
|
static void IRAM_ATTR i2c_master_cmd_begin_static(i2c_port_t i2c_num);
|
|
|
|
/*
|
|
For i2c master mode, we don't need to use a buffer for the data, the APIs will execute the master commands
|
|
and return after all of the commands have been sent out or when error occurs. So when we send master commands,
|
|
we should free or modify the source data only after the i2c_master_cmd_begin function returns.
|
|
For i2c slave mode, we need a data buffer to stash the sending and receiving data, because the hardware fifo
|
|
has only 32 bytes.
|
|
*/
|
|
|
|
esp_err_t i2c_driver_install(i2c_port_t i2c_num, i2c_mode_t mode, size_t slv_rx_buf_len, size_t slv_tx_buf_len,
|
|
int intr_alloc_flags)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(mode == I2C_MODE_MASTER || ( slv_rx_buf_len > 100 || slv_tx_buf_len > 100 ), I2C_SLAVE_BUFFER_LEN_ERR_STR,
|
|
ESP_ERR_INVALID_ARG);
|
|
uint32_t intr_mask = 0;
|
|
if (p_i2c_obj[i2c_num] == NULL) {
|
|
p_i2c_obj[i2c_num] = (i2c_obj_t*) calloc(1, sizeof(i2c_obj_t));
|
|
if (p_i2c_obj[i2c_num] == NULL) {
|
|
ESP_LOGE(I2C_TAG, I2C_DRIVER_MALLOC_ERR_STR);
|
|
return ESP_FAIL;
|
|
}
|
|
i2c_obj_t* p_i2c = p_i2c_obj[i2c_num];
|
|
p_i2c->i2c_num = i2c_num;
|
|
p_i2c->mode = mode;
|
|
p_i2c->cmd_idx = 0;
|
|
p_i2c->rx_cnt = 0;
|
|
p_i2c->status = I2C_STATUS_IDLE;
|
|
|
|
p_i2c->rx_fifo_remain = I2C_FIFO_LEN;
|
|
p_i2c->tx_fifo_remain = I2C_FIFO_LEN;
|
|
|
|
if (mode == I2C_MODE_SLAVE) {
|
|
//we only use ringbuffer for slave mode.
|
|
if (slv_rx_buf_len > 0) {
|
|
p_i2c->rx_ring_buf = xRingbufferCreate(slv_rx_buf_len, RINGBUF_TYPE_BYTEBUF);
|
|
if (p_i2c->rx_ring_buf == NULL) {
|
|
ESP_LOGE(I2C_TAG, I2C_BUF_ERR_STR);
|
|
goto err;
|
|
}
|
|
p_i2c->rx_buf_length = slv_rx_buf_len;
|
|
} else {
|
|
p_i2c->tx_ring_buf = NULL;
|
|
p_i2c->rx_buf_length = 0;
|
|
}
|
|
if (slv_tx_buf_len > 0) {
|
|
p_i2c->tx_ring_buf = xRingbufferCreate(slv_tx_buf_len, RINGBUF_TYPE_BYTEBUF);
|
|
if (p_i2c->tx_ring_buf == NULL) {
|
|
ESP_LOGE(I2C_TAG, I2C_BUF_ERR_STR);
|
|
goto err;
|
|
}
|
|
p_i2c->tx_buf_length = slv_tx_buf_len;
|
|
} else {
|
|
p_i2c->tx_ring_buf = NULL;
|
|
p_i2c->tx_buf_length = 0;
|
|
}
|
|
p_i2c->slv_rx_mux = xSemaphoreCreateMutex();
|
|
p_i2c->slv_tx_mux = xSemaphoreCreateMutex();
|
|
if (p_i2c->slv_rx_mux == NULL || p_i2c->slv_rx_mux == NULL) {
|
|
ESP_LOGE(I2C_TAG, I2C_SEM_ERR_STR);
|
|
goto err;
|
|
}
|
|
intr_mask |= ( I2C_RXFIFO_FULL_INT_ENA_M | I2C_TRANS_COMPLETE_INT_ENA_M );
|
|
} else {
|
|
//semaphore to sync sending process, because we only have 32 bytes for hardware fifo.
|
|
p_i2c->cmd_sem = xSemaphoreCreateBinary();
|
|
p_i2c->cmd_mux = xSemaphoreCreateMutex();
|
|
if (p_i2c->cmd_sem == NULL || p_i2c->cmd_mux == NULL) {
|
|
ESP_LOGE(I2C_TAG, I2C_SEM_ERR_STR);
|
|
goto err;
|
|
}
|
|
//command link
|
|
p_i2c->cmd_link.cur = NULL;
|
|
p_i2c->cmd_link.head = NULL;
|
|
p_i2c->cmd_link.free = NULL;
|
|
|
|
p_i2c->tx_ring_buf = NULL;
|
|
p_i2c->rx_buf_length = 0;
|
|
p_i2c->tx_ring_buf = NULL;
|
|
p_i2c->tx_buf_length = 0;
|
|
}
|
|
} else {
|
|
ESP_LOGE(I2C_TAG, I2C_DRIVER_ERR_STR);
|
|
return ESP_FAIL;
|
|
}
|
|
//hook isr handler
|
|
i2c_isr_register(i2c_num, i2c_isr_handler_default, p_i2c_obj[i2c_num], intr_alloc_flags, &p_i2c_obj[i2c_num]->intr_handle);
|
|
intr_mask |= ( I2C_TRANS_COMPLETE_INT_ENA_M |
|
|
I2C_TRANS_START_INT_ENA_M |
|
|
I2C_ARBITRATION_LOST_INT_ENA_M |
|
|
I2C_ACK_ERR_INT_ENA_M |
|
|
I2C_RXFIFO_OVF_INT_ENA_M |
|
|
I2C_SLAVE_TRAN_COMP_INT_ENA_M );
|
|
SET_PERI_REG_MASK(I2C_INT_ENA_REG(i2c_num), intr_mask);
|
|
return ESP_OK;
|
|
|
|
err:
|
|
//Some error has happened. Free/destroy all allocated things and return ESP_FAIL.
|
|
if (p_i2c_obj[i2c_num]) {
|
|
if (p_i2c_obj[i2c_num]->rx_ring_buf) {
|
|
vRingbufferDelete(p_i2c_obj[i2c_num]->rx_ring_buf);
|
|
p_i2c_obj[i2c_num]->rx_ring_buf = NULL;
|
|
p_i2c_obj[i2c_num]->rx_buf_length = 0;
|
|
}
|
|
if (p_i2c_obj[i2c_num]->tx_ring_buf) {
|
|
vRingbufferDelete(p_i2c_obj[i2c_num]->tx_ring_buf);
|
|
p_i2c_obj[i2c_num]->tx_ring_buf = NULL;
|
|
p_i2c_obj[i2c_num]->tx_buf_length = 0;
|
|
}
|
|
if (p_i2c_obj[i2c_num]->cmd_sem) {
|
|
vSemaphoreDelete(p_i2c_obj[i2c_num]->cmd_sem);
|
|
}
|
|
if (p_i2c_obj[i2c_num]->cmd_mux) {
|
|
vSemaphoreDelete(p_i2c_obj[i2c_num]->cmd_mux);
|
|
}
|
|
if (p_i2c_obj[i2c_num]->slv_rx_mux) {
|
|
vSemaphoreDelete(p_i2c_obj[i2c_num]->slv_rx_mux);
|
|
}
|
|
if (p_i2c_obj[i2c_num]->slv_tx_mux) {
|
|
vSemaphoreDelete(p_i2c_obj[i2c_num]->slv_tx_mux);
|
|
}
|
|
}
|
|
free(p_i2c_obj[i2c_num]);
|
|
return ESP_FAIL;
|
|
}
|
|
|
|
esp_err_t i2c_driver_delete(i2c_port_t i2c_num)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(p_i2c_obj[i2c_num] != NULL, I2C_DRIVER_ERR_STR, ESP_FAIL);
|
|
|
|
i2c_obj_t* p_i2c = p_i2c_obj[i2c_num];
|
|
if (p_i2c->cmd_mux) {
|
|
xSemaphoreTake(p_i2c->cmd_mux, portMAX_DELAY);
|
|
vSemaphoreDelete(p_i2c->cmd_mux);
|
|
}
|
|
if (p_i2c->cmd_sem) {
|
|
vSemaphoreDelete(p_i2c->cmd_sem);
|
|
}
|
|
if (p_i2c->slv_rx_mux) {
|
|
vSemaphoreDelete(p_i2c->slv_rx_mux);
|
|
}
|
|
if (p_i2c->slv_tx_mux) {
|
|
vSemaphoreDelete(p_i2c->slv_tx_mux);
|
|
}
|
|
|
|
if (p_i2c->rx_ring_buf) {
|
|
vRingbufferDelete(p_i2c->rx_ring_buf);
|
|
p_i2c->rx_ring_buf = NULL;
|
|
p_i2c->rx_buf_length = 0;
|
|
}
|
|
if (p_i2c->tx_ring_buf) {
|
|
vRingbufferDelete(p_i2c->tx_ring_buf);
|
|
p_i2c->tx_ring_buf = NULL;
|
|
p_i2c->tx_buf_length = 0;
|
|
}
|
|
uint32_t intr_mask = I2C_MASTER_TRAN_COMP_INT_ENA_M |
|
|
I2C_TIME_OUT_INT_ENA_M |
|
|
I2C_TRANS_COMPLETE_INT_ENA_M |
|
|
I2C_TRANS_START_INT_ENA_M |
|
|
I2C_TX_SEND_EMPTY_INT_ENA_M |
|
|
I2C_ARBITRATION_LOST_INT_ENA_M |
|
|
I2C_ACK_ERR_INT_ENA_M |
|
|
I2C_RXFIFO_OVF_INT_ENA_M |
|
|
I2C_RX_REC_FULL_INT_ENA_M |
|
|
I2C_SLAVE_TRAN_COMP_INT_ENA_M;
|
|
CLEAR_PERI_REG_MASK(I2C_INT_ENA_REG(i2c_num), intr_mask);
|
|
esp_intr_free(p_i2c->intr_handle);
|
|
p_i2c->intr_handle = NULL;
|
|
free(p_i2c_obj[i2c_num]);
|
|
p_i2c_obj[i2c_num] = NULL;
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_reset_tx_fifo(i2c_port_t i2c_num)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
I2C[i2c_num]->fifo_conf.tx_fifo_rst = 1;
|
|
I2C[i2c_num]->fifo_conf.tx_fifo_rst = 0;
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_reset_rx_fifo(i2c_port_t i2c_num)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
I2C[i2c_num]->fifo_conf.rx_fifo_rst = 1;
|
|
I2C[i2c_num]->fifo_conf.rx_fifo_rst = 0;
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static void i2c_isr_handler_default(void* arg)
|
|
{
|
|
i2c_obj_t* p_i2c = (i2c_obj_t*) arg;
|
|
int i2c_num = p_i2c->i2c_num;
|
|
uint32_t status = I2C[i2c_num]->int_status.val;
|
|
int idx = 0;
|
|
portBASE_TYPE HPTaskAwoken = pdFALSE;
|
|
while (status != 0) {
|
|
status = I2C[i2c_num]->int_status.val;
|
|
if (status & I2C_TX_SEND_EMPTY_INT_ST_M) {
|
|
I2C[i2c_num]->int_clr.tx_send_empty = 1;
|
|
} else if (status & I2C_RX_REC_FULL_INT_ST_M) {
|
|
I2C[i2c_num]->int_clr.rx_rec_full = 1;
|
|
} else if (status & I2C_ACK_ERR_INT_ST_M) {
|
|
I2C[i2c_num]->int_clr.ack_err = 1;
|
|
if (p_i2c->mode == I2C_MODE_MASTER) {
|
|
p_i2c_obj[i2c_num]->status = I2C_STATUS_ACK_ERROR;
|
|
I2C[i2c_num]->int_clr.ack_err = 1;
|
|
//get error ack value from slave device, stop the commands
|
|
i2c_master_cmd_begin_static(i2c_num);
|
|
}
|
|
} else if (status & I2C_TRANS_START_INT_ST_M) {
|
|
I2C[i2c_num]->int_clr.trans_start = 1;
|
|
} else if (status & I2C_TIME_OUT_INT_ST_M) {
|
|
I2C[i2c_num]->int_clr.time_out = 1;
|
|
} else if (status & I2C_TRANS_COMPLETE_INT_ST_M) {
|
|
I2C[i2c_num]->int_clr.trans_complete = 1;
|
|
if (p_i2c->mode == I2C_MODE_SLAVE) {
|
|
int rx_fifo_cnt = I2C[i2c_num]->status_reg.rx_fifo_cnt;
|
|
for (idx = 0; idx < rx_fifo_cnt; idx++) {
|
|
p_i2c->data_buf[idx] = I2C[i2c_num]->fifo_data.data;
|
|
}
|
|
xRingbufferSendFromISR(p_i2c->rx_ring_buf, p_i2c->data_buf, rx_fifo_cnt, &HPTaskAwoken);
|
|
if (HPTaskAwoken == pdTRUE) {
|
|
portYIELD_FROM_ISR();
|
|
}
|
|
I2C[i2c_num]->int_clr.rx_fifo_full = 1;
|
|
} else {
|
|
if (p_i2c->status != I2C_STATUS_ACK_ERROR) {
|
|
i2c_master_cmd_begin_static(i2c_num);
|
|
}
|
|
}
|
|
} else if (status & I2C_MASTER_TRAN_COMP_INT_ST_M) {
|
|
I2C[i2c_num]->int_clr.master_tran_comp = 1;
|
|
} else if (status & I2C_ARBITRATION_LOST_INT_ST_M) {
|
|
I2C[i2c_num]->int_clr.arbitration_lost = 1;
|
|
} else if (status & I2C_SLAVE_TRAN_COMP_INT_ST_M) {
|
|
I2C[i2c_num]->int_clr.slave_tran_comp = 1;
|
|
} else if (status & I2C_END_DETECT_INT_ST_M) {
|
|
I2C[i2c_num]->int_ena.end_detect = 0;
|
|
I2C[i2c_num]->int_clr.end_detect = 1;
|
|
i2c_master_cmd_begin_static(i2c_num);
|
|
} else if (status & I2C_RXFIFO_OVF_INT_ST_M) {
|
|
I2C[i2c_num]->int_clr.rx_fifo_ovf = 1;
|
|
} else if (status & I2C_TXFIFO_EMPTY_INT_ST_M) {
|
|
int tx_fifo_rem = I2C_FIFO_LEN - I2C[i2c_num]->status_reg.tx_fifo_cnt;
|
|
size_t size = 0;
|
|
uint8_t *data = (uint8_t*) xRingbufferReceiveUpToFromISR(p_i2c->tx_ring_buf, &size, tx_fifo_rem);
|
|
if (data) {
|
|
for (idx = 0; idx < size; idx++) {
|
|
WRITE_PERI_REG(I2C_DATA_APB_REG(i2c_num), data[idx]);
|
|
}
|
|
vRingbufferReturnItemFromISR(p_i2c->tx_ring_buf, data, &HPTaskAwoken);
|
|
if (HPTaskAwoken == pdTRUE) {
|
|
portYIELD_FROM_ISR();
|
|
}
|
|
I2C[i2c_num]->int_ena.tx_fifo_empty = 1;
|
|
I2C[i2c_num]->int_clr.tx_fifo_empty = 1;
|
|
} else {
|
|
I2C[i2c_num]->int_ena.tx_fifo_empty = 0;
|
|
I2C[i2c_num]->int_clr.tx_fifo_empty = 1;
|
|
}
|
|
} else if (status & I2C_RXFIFO_FULL_INT_ST_M) {
|
|
int rx_fifo_cnt = I2C[i2c_num]->status_reg.rx_fifo_cnt;
|
|
for (idx = 0; idx < rx_fifo_cnt; idx++) {
|
|
p_i2c->data_buf[idx] = I2C[i2c_num]->fifo_data.data;
|
|
}
|
|
xRingbufferSendFromISR(p_i2c->rx_ring_buf, p_i2c->data_buf, rx_fifo_cnt, &HPTaskAwoken);
|
|
if (HPTaskAwoken == pdTRUE) {
|
|
portYIELD_FROM_ISR();
|
|
}
|
|
I2C[i2c_num]->int_clr.rx_fifo_full = 1;
|
|
} else {
|
|
I2C[i2c_num]->int_clr.val = status;
|
|
}
|
|
}
|
|
}
|
|
|
|
esp_err_t i2c_set_data_mode(i2c_port_t i2c_num, i2c_trans_mode_t tx_trans_mode, i2c_trans_mode_t rx_trans_mode)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(tx_trans_mode < I2C_DATA_MODE_MAX, I2C_TRANS_MODE_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(rx_trans_mode < I2C_DATA_MODE_MAX, I2C_TRANS_MODE_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
I2C[i2c_num]->ctr.rx_lsb_first = rx_trans_mode; //set rx data msb first
|
|
I2C[i2c_num]->ctr.tx_lsb_first = tx_trans_mode; //set tx data msb first
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_get_data_mode(i2c_port_t i2c_num, i2c_trans_mode_t *tx_trans_mode, i2c_trans_mode_t *rx_trans_mode)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
if (tx_trans_mode) {
|
|
*tx_trans_mode = I2C[i2c_num]->ctr.tx_lsb_first;
|
|
}
|
|
if (rx_trans_mode) {
|
|
*rx_trans_mode = I2C[i2c_num]->ctr.rx_lsb_first;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_param_config(i2c_port_t i2c_num, i2c_config_t* i2c_conf)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(i2c_conf != NULL, I2C_ADDR_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(i2c_conf->mode < I2C_MODE_MAX, I2C_MODE_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
|
|
esp_err_t ret = i2c_set_pin(i2c_num, i2c_conf->sda_io_num, i2c_conf->scl_io_num,
|
|
i2c_conf->sda_pullup_en, i2c_conf->scl_pullup_en, i2c_conf->mode);
|
|
if (ret != ESP_OK) {
|
|
return ret;
|
|
}
|
|
if (i2c_num == I2C_NUM_0) {
|
|
periph_module_enable(PERIPH_I2C0_MODULE);
|
|
} else if (i2c_num == I2C_NUM_1) {
|
|
periph_module_enable(PERIPH_I2C1_MODULE);
|
|
}
|
|
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
I2C[i2c_num]->ctr.rx_lsb_first = I2C_DATA_MODE_MSB_FIRST; //set rx data msb first
|
|
I2C[i2c_num]->ctr.tx_lsb_first = I2C_DATA_MODE_MSB_FIRST; //set tx data msb first
|
|
I2C[i2c_num]->ctr.ms_mode = i2c_conf->mode; //mode for master or slave
|
|
I2C[i2c_num]->ctr.sda_force_out = 1; // set open-drain output mode
|
|
I2C[i2c_num]->ctr.scl_force_out = 1; // set open-drain output mode
|
|
I2C[i2c_num]->ctr.sample_scl_level = 0; //sample at high level of clock
|
|
|
|
if (i2c_conf->mode == I2C_MODE_SLAVE) { //slave mode
|
|
I2C[i2c_num]->slave_addr.addr = i2c_conf->slave.slave_addr;
|
|
I2C[i2c_num]->slave_addr.en_10bit = i2c_conf->slave.addr_10bit_en;
|
|
I2C[i2c_num]->fifo_conf.nonfifo_en = 0;
|
|
I2C[i2c_num]->fifo_conf.fifo_addr_cfg_en = 0;
|
|
I2C[i2c_num]->fifo_conf.rx_fifo_full_thrhd = I2C_FIFO_FULL_THRESH_VAL;
|
|
I2C[i2c_num]->fifo_conf.tx_fifo_empty_thrhd = I2C_FIFO_EMPTY_THRESH_VAL;
|
|
I2C[i2c_num]->int_ena.rx_fifo_full = 1;
|
|
I2C[i2c_num]->ctr.trans_start = 0;
|
|
} else {
|
|
I2C[i2c_num]->fifo_conf.nonfifo_en = 0;
|
|
}
|
|
//set frequency
|
|
int half_cycle = ( I2C_APB_CLK_FREQ / i2c_conf->master.clk_speed ) / 2;
|
|
I2C[i2c_num]->scl_low_period.period = half_cycle - 1;
|
|
I2C[i2c_num]->scl_high_period.period = ( I2C_APB_CLK_FREQ / i2c_conf->master.clk_speed ) - half_cycle - 1;
|
|
//set timing for start signal
|
|
I2C[i2c_num]->scl_start_hold.time = half_cycle;
|
|
I2C[i2c_num]->scl_rstart_setup.time = half_cycle;
|
|
//set timing for stop signal
|
|
I2C[i2c_num]->scl_stop_hold.time = half_cycle;
|
|
I2C[i2c_num]->scl_stop_setup.time = half_cycle;
|
|
//set timing for data
|
|
I2C[i2c_num]->sda_hold.time = half_cycle / 2;
|
|
I2C[i2c_num]->sda_sample.time = half_cycle / 2;
|
|
//set timeout of receving data
|
|
I2C[i2c_num]->timeout.tout = 200000;
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_set_period(i2c_port_t i2c_num, int high_period, int low_period)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
I2C[i2c_num]->scl_high_period.period = high_period;
|
|
I2C[i2c_num]->scl_low_period.period = low_period;
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_get_period(i2c_port_t i2c_num, int* high_period, int* low_period)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
if (high_period) {
|
|
*high_period = I2C[i2c_num]->scl_high_period.period;
|
|
}
|
|
if (low_period) {
|
|
*low_period = I2C[i2c_num]->scl_low_period.period;
|
|
}
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_set_start_timing(i2c_port_t i2c_num, int setup_time, int hold_time)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C[i2c_num]->scl_start_hold.time = hold_time;
|
|
I2C[i2c_num]->scl_rstart_setup.time = setup_time;
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_get_start_timing(i2c_port_t i2c_num, int* setup_time, int* hold_time)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
if (hold_time) {
|
|
*hold_time = I2C[i2c_num]->scl_start_hold.time;
|
|
}
|
|
if (setup_time) {
|
|
*setup_time = I2C[i2c_num]->scl_rstart_setup.time;
|
|
}
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_set_stop_timing(i2c_port_t i2c_num, int setup_time, int hold_time)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C[i2c_num]->scl_stop_hold.time = hold_time;
|
|
I2C[i2c_num]->scl_stop_setup.time = setup_time;
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_get_stop_timing(i2c_port_t i2c_num, int* setup_time, int* hold_time)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
if (setup_time) {
|
|
*setup_time = I2C[i2c_num]->scl_stop_setup.time;
|
|
}
|
|
if (hold_time) {
|
|
*hold_time = I2C[i2c_num]->scl_stop_hold.time;
|
|
}
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_set_data_timing(i2c_port_t i2c_num, int sample_time, int hold_time)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C[i2c_num]->sda_hold.time = hold_time;
|
|
I2C[i2c_num]->sda_sample.time = sample_time;
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_get_data_timing(i2c_port_t i2c_num, int* sample_time, int* hold_time)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
if (sample_time) {
|
|
*sample_time = I2C[i2c_num]->sda_sample.time;
|
|
}
|
|
if (hold_time) {
|
|
*hold_time = I2C[i2c_num]->sda_hold.time;
|
|
}
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_isr_register(i2c_port_t i2c_num, void (*fn)(void*), void * arg, int intr_alloc_flags, intr_handle_t *handle)
|
|
{
|
|
I2C_CHECK(i2c_num < I2C_NUM_MAX, I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(fn != NULL, I2C_ADDR_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
esp_err_t ret;
|
|
switch (i2c_num) {
|
|
case I2C_NUM_1:
|
|
ret = esp_intr_alloc(ETS_I2C_EXT1_INTR_SOURCE, intr_alloc_flags, fn, arg, handle);
|
|
break;
|
|
case I2C_NUM_0:
|
|
default:
|
|
ret = esp_intr_alloc(ETS_I2C_EXT0_INTR_SOURCE, intr_alloc_flags, fn, arg, handle);
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2c_isr_free(intr_handle_t handle)
|
|
{
|
|
return esp_intr_free(handle);
|
|
}
|
|
|
|
esp_err_t i2c_set_pin(i2c_port_t i2c_num, gpio_num_t sda_io_num, gpio_num_t scl_io_num, gpio_pullup_t sda_pullup_en, gpio_pullup_t scl_pullup_en, i2c_mode_t mode)
|
|
{
|
|
I2C_CHECK(( i2c_num < I2C_NUM_MAX ), I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(((GPIO_IS_VALID_OUTPUT_GPIO(sda_io_num))), I2C_SDA_IO_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK((GPIO_IS_VALID_OUTPUT_GPIO(scl_io_num)) ||
|
|
(GPIO_IS_VALID_GPIO(scl_io_num) && mode == I2C_MODE_SLAVE),
|
|
I2C_SCL_IO_ERR_STR,
|
|
ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK((sda_pullup_en == GPIO_PULLUP_ENABLE && GPIO_IS_VALID_OUTPUT_GPIO(sda_io_num)) ||
|
|
sda_pullup_en == GPIO_PULLUP_DISABLE, I2C_GPIO_PULLUP_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK((scl_pullup_en == GPIO_PULLUP_ENABLE && GPIO_IS_VALID_OUTPUT_GPIO(scl_io_num)) ||
|
|
scl_pullup_en == GPIO_PULLUP_DISABLE, I2C_GPIO_PULLUP_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
|
|
int sda_in_sig, sda_out_sig, scl_in_sig, scl_out_sig;
|
|
switch (i2c_num) {
|
|
case I2C_NUM_1:
|
|
sda_out_sig = I2CEXT1_SDA_OUT_IDX;
|
|
sda_in_sig = I2CEXT1_SDA_IN_IDX;
|
|
scl_out_sig = I2CEXT1_SCL_OUT_IDX;
|
|
scl_in_sig = I2CEXT1_SCL_IN_IDX;
|
|
break;
|
|
case I2C_NUM_0:
|
|
default:
|
|
sda_out_sig = I2CEXT0_SDA_OUT_IDX;
|
|
sda_in_sig = I2CEXT0_SDA_IN_IDX;
|
|
scl_out_sig = I2CEXT0_SCL_OUT_IDX;
|
|
scl_in_sig = I2CEXT0_SCL_IN_IDX;
|
|
break;
|
|
}
|
|
if (sda_io_num >= 0) {
|
|
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[sda_io_num], PIN_FUNC_GPIO);
|
|
gpio_set_direction(sda_io_num, GPIO_MODE_INPUT_OUTPUT_OD);
|
|
if (sda_pullup_en == GPIO_PULLUP_ENABLE) {
|
|
gpio_set_pull_mode(sda_io_num, GPIO_PULLUP_ONLY);
|
|
} else {
|
|
gpio_set_pull_mode(sda_io_num, GPIO_FLOATING);
|
|
}
|
|
gpio_matrix_out(sda_io_num, sda_out_sig, 0, 0);
|
|
gpio_matrix_in(sda_io_num, sda_in_sig, 0);
|
|
}
|
|
|
|
if (scl_io_num >= 0) {
|
|
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[scl_io_num], PIN_FUNC_GPIO);
|
|
if (mode == I2C_MODE_MASTER) {
|
|
gpio_set_direction(scl_io_num, GPIO_MODE_INPUT_OUTPUT_OD);
|
|
gpio_matrix_out(scl_io_num, scl_out_sig, 0, 0);
|
|
} else {
|
|
gpio_set_direction(scl_io_num, GPIO_MODE_INPUT);
|
|
}
|
|
if (scl_pullup_en == GPIO_PULLUP_ENABLE) {
|
|
gpio_set_pull_mode(scl_io_num, GPIO_PULLUP_ONLY);
|
|
} else {
|
|
gpio_set_pull_mode(scl_io_num, GPIO_FLOATING);
|
|
}
|
|
gpio_matrix_in(scl_io_num, scl_in_sig, 0);
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
i2c_cmd_handle_t i2c_cmd_link_create()
|
|
{
|
|
i2c_cmd_desc_t* cmd_desc = (i2c_cmd_desc_t*) calloc(1, sizeof(i2c_cmd_desc_t));
|
|
return (i2c_cmd_handle_t) cmd_desc;
|
|
}
|
|
|
|
void i2c_cmd_link_delete(i2c_cmd_handle_t cmd_handle)
|
|
{
|
|
if (cmd_handle == NULL) {
|
|
return;
|
|
}
|
|
i2c_cmd_desc_t* cmd = (i2c_cmd_desc_t*) cmd_handle;
|
|
while (cmd->free) {
|
|
i2c_cmd_link_t* ptmp = cmd->free;
|
|
cmd->free = cmd->free->next;
|
|
free(ptmp);
|
|
}
|
|
cmd->cur = NULL;
|
|
cmd->free = NULL;
|
|
cmd->head = NULL;
|
|
free(cmd_handle);
|
|
return;
|
|
}
|
|
|
|
static esp_err_t i2c_cmd_link_append(i2c_cmd_handle_t cmd_handle, i2c_cmd_t* cmd)
|
|
{
|
|
i2c_cmd_desc_t* cmd_desc = (i2c_cmd_desc_t*) cmd_handle;
|
|
if (cmd_desc->head == NULL) {
|
|
cmd_desc->head = (i2c_cmd_link_t*) malloc(sizeof(i2c_cmd_link_t));
|
|
if (cmd_desc->head == NULL) {
|
|
ESP_LOGE(I2C_TAG, I2C_CMD_MALLOC_ERR_STR);
|
|
goto err;
|
|
}
|
|
cmd_desc->cur = cmd_desc->head;
|
|
cmd_desc->free = cmd_desc->head;
|
|
} else {
|
|
cmd_desc->cur->next = (i2c_cmd_link_t*) malloc(sizeof(i2c_cmd_link_t));
|
|
if (cmd_desc->cur->next == NULL) {
|
|
ESP_LOGE(I2C_TAG, I2C_CMD_MALLOC_ERR_STR);
|
|
goto err;
|
|
}
|
|
cmd_desc->cur = cmd_desc->cur->next;
|
|
}
|
|
memcpy((uint8_t*) &cmd_desc->cur->cmd, (uint8_t*) cmd, sizeof(i2c_cmd_t));
|
|
cmd_desc->cur->next = NULL;
|
|
return ESP_OK;
|
|
|
|
err:
|
|
return ESP_FAIL;
|
|
}
|
|
|
|
esp_err_t i2c_master_start(i2c_cmd_handle_t cmd_handle)
|
|
{
|
|
I2C_CHECK(cmd_handle != NULL, I2C_CMD_LINK_INIT_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
i2c_cmd_t cmd;
|
|
cmd.ack_en = 0;
|
|
cmd.ack_exp = 0;
|
|
cmd.ack_val = 0;
|
|
cmd.byte_num = 0;
|
|
cmd.data = NULL;
|
|
cmd.op_code = I2C_CMD_RESTART;
|
|
return i2c_cmd_link_append(cmd_handle, &cmd);
|
|
}
|
|
|
|
esp_err_t i2c_master_stop(i2c_cmd_handle_t cmd_handle)
|
|
{
|
|
I2C_CHECK(cmd_handle != NULL, I2C_CMD_LINK_INIT_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
i2c_cmd_t cmd;
|
|
cmd.ack_en = 0;
|
|
cmd.ack_exp = 0;
|
|
cmd.ack_val = 0;
|
|
cmd.byte_num = 0;
|
|
cmd.data = NULL;
|
|
cmd.op_code = I2C_CMD_STOP;
|
|
return i2c_cmd_link_append(cmd_handle, &cmd);
|
|
}
|
|
|
|
esp_err_t i2c_master_write(i2c_cmd_handle_t cmd_handle, uint8_t* data, size_t data_len, bool ack_en)
|
|
{
|
|
I2C_CHECK((data != NULL), I2C_ADDR_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(cmd_handle != NULL, I2C_CMD_LINK_INIT_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
|
|
uint8_t len_tmp;
|
|
int data_offset = 0;
|
|
esp_err_t ret;
|
|
while (data_len > 0) {
|
|
len_tmp = data_len > 0xff ? 0xff : data_len;
|
|
data_len -= len_tmp;
|
|
i2c_cmd_t cmd;
|
|
cmd.ack_en = ack_en;
|
|
cmd.ack_exp = 0;
|
|
cmd.ack_val = 0;
|
|
cmd.byte_num = len_tmp;
|
|
cmd.op_code = I2C_CMD_WRITE;
|
|
cmd.data = data + data_offset;
|
|
ret = i2c_cmd_link_append(cmd_handle, &cmd);
|
|
data_offset += len_tmp;
|
|
if (ret != ESP_OK) {
|
|
return ret;
|
|
}
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_master_write_byte(i2c_cmd_handle_t cmd_handle, uint8_t data, bool ack_en)
|
|
{
|
|
I2C_CHECK(cmd_handle != NULL, I2C_CMD_LINK_INIT_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
i2c_cmd_t cmd;
|
|
cmd.ack_en = ack_en;
|
|
cmd.ack_exp = 0;
|
|
cmd.ack_val = 0;
|
|
cmd.byte_num = 1;
|
|
cmd.op_code = I2C_CMD_WRITE;
|
|
cmd.data = NULL;
|
|
cmd.byte_cmd = data;
|
|
return i2c_cmd_link_append(cmd_handle, &cmd);
|
|
}
|
|
|
|
esp_err_t i2c_master_read(i2c_cmd_handle_t cmd_handle, uint8_t* data, size_t data_len, int ack)
|
|
{
|
|
I2C_CHECK((data != NULL), I2C_ADDR_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(cmd_handle != NULL, I2C_CMD_LINK_INIT_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
|
|
int len_tmp;
|
|
int data_offset = 0;
|
|
esp_err_t ret;
|
|
while (data_len > 0) {
|
|
len_tmp = data_len > 0xff ? 0xff : data_len;
|
|
data_len -= len_tmp;
|
|
i2c_cmd_t cmd;
|
|
cmd.ack_en = 0;
|
|
cmd.ack_exp = 0;
|
|
cmd.ack_val = ack & 0x1;
|
|
cmd.byte_num = len_tmp;
|
|
cmd.op_code = I2C_CMD_READ;
|
|
cmd.data = data + data_offset;
|
|
ret = i2c_cmd_link_append(cmd_handle, &cmd);
|
|
data_offset += len_tmp;
|
|
if (ret != ESP_OK) {
|
|
return ret;
|
|
}
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2c_master_read_byte(i2c_cmd_handle_t cmd_handle, uint8_t* data, int ack)
|
|
{
|
|
I2C_CHECK((data != NULL), I2C_ADDR_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(cmd_handle != NULL, I2C_CMD_LINK_INIT_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
i2c_cmd_t cmd;
|
|
cmd.ack_en = 0;
|
|
cmd.ack_exp = 0;
|
|
cmd.ack_val = ack & 0x1;
|
|
cmd.byte_num = 1;
|
|
cmd.op_code = I2C_CMD_READ;
|
|
cmd.data = data;
|
|
return i2c_cmd_link_append(cmd_handle, &cmd);
|
|
}
|
|
|
|
static void IRAM_ATTR i2c_master_cmd_begin_static(i2c_port_t i2c_num)
|
|
{
|
|
i2c_obj_t* p_i2c = p_i2c_obj[i2c_num];
|
|
portBASE_TYPE HPTaskAwoken = pdFALSE;
|
|
//This should never happen
|
|
if (p_i2c->mode == I2C_MODE_SLAVE) {
|
|
return;
|
|
}
|
|
if (p_i2c->status == I2C_STATUS_DONE) {
|
|
return;
|
|
} else if (p_i2c->status == I2C_STATUS_ACK_ERROR) {
|
|
I2C[i2c_num]->int_ena.end_detect = 0;
|
|
I2C[i2c_num]->int_clr.end_detect = 1;
|
|
I2C[i2c_num]->int_ena.master_tran_comp = 0;
|
|
xSemaphoreGiveFromISR(p_i2c->cmd_sem, &HPTaskAwoken);
|
|
if (HPTaskAwoken == pdTRUE) {
|
|
portYIELD_FROM_ISR();
|
|
}
|
|
return;
|
|
} else if (p_i2c->status == I2C_STATUS_READ) {
|
|
i2c_cmd_t *cmd = &p_i2c->cmd_link.head->cmd;
|
|
while (p_i2c->rx_cnt-- > 0) {
|
|
*cmd->data++ = READ_PERI_REG(I2C_DATA_APB_REG(i2c_num));
|
|
}
|
|
if (cmd->byte_num > 0) {
|
|
p_i2c->rx_fifo_remain = I2C_FIFO_LEN;
|
|
p_i2c->cmd_idx = 0;
|
|
} else {
|
|
p_i2c->cmd_link.head = p_i2c->cmd_link.head->next;
|
|
}
|
|
}
|
|
if (p_i2c->cmd_link.head == NULL) {
|
|
p_i2c->cmd_link.cur = NULL;
|
|
xSemaphoreGiveFromISR(p_i2c->cmd_sem, &HPTaskAwoken);
|
|
if (HPTaskAwoken == pdTRUE) {
|
|
portYIELD_FROM_ISR();
|
|
}
|
|
return;
|
|
}
|
|
while (p_i2c->cmd_link.head) {
|
|
i2c_cmd_t *cmd = &p_i2c->cmd_link.head->cmd;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx].val = 0;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx].ack_en = cmd->ack_en;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx].ack_exp = cmd->ack_exp;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx].ack_val = cmd->ack_val;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num = cmd->byte_num;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx].op_code = cmd->op_code;
|
|
if (cmd->op_code == I2C_CMD_WRITE) {
|
|
//TODO: to reduce interrupt number
|
|
if (cmd->data) {
|
|
while (p_i2c->tx_fifo_remain > 0 && cmd->byte_num > 0) {
|
|
WRITE_PERI_REG(I2C_DATA_APB_REG(i2c_num), *cmd->data++);
|
|
p_i2c->tx_fifo_remain--;
|
|
cmd->byte_num--;
|
|
}
|
|
} else {
|
|
WRITE_PERI_REG(I2C_DATA_APB_REG(i2c_num), cmd->byte_cmd);
|
|
p_i2c->tx_fifo_remain--;
|
|
cmd->byte_num--;
|
|
}
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num -= cmd->byte_num;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx + 1].val = 0;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx + 1].op_code = I2C_CMD_END;
|
|
p_i2c->tx_fifo_remain = I2C_FIFO_LEN;
|
|
p_i2c->cmd_idx = 0;
|
|
if (cmd->byte_num > 0) {
|
|
} else {
|
|
p_i2c->cmd_link.head = p_i2c->cmd_link.head->next;
|
|
}
|
|
p_i2c->status = I2C_STATUS_WRITE;
|
|
break;
|
|
} else if(cmd->op_code == I2C_CMD_READ) {
|
|
//TODO: to reduce interrupt number
|
|
p_i2c->rx_cnt = cmd->byte_num > p_i2c->rx_fifo_remain ? p_i2c->rx_fifo_remain : cmd->byte_num;
|
|
cmd->byte_num -= p_i2c->rx_cnt;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx].byte_num = p_i2c->rx_cnt;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx].ack_val = cmd->ack_val;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx + 1].val = 0;
|
|
I2C[i2c_num]->command[p_i2c->cmd_idx + 1].op_code = I2C_CMD_END;
|
|
p_i2c->status = I2C_STATUS_READ;
|
|
break;
|
|
} else {
|
|
}
|
|
p_i2c->cmd_idx++;
|
|
p_i2c->cmd_link.head = p_i2c->cmd_link.head->next;
|
|
if (p_i2c->cmd_link.head == NULL || p_i2c->cmd_idx >= 15) {
|
|
p_i2c->tx_fifo_remain = I2C_FIFO_LEN;
|
|
p_i2c->cmd_idx = 0;
|
|
p_i2c->status = I2C_STATUS_IDLE;
|
|
break;
|
|
}
|
|
}
|
|
I2C[i2c_num]->int_clr.end_detect = 1;
|
|
I2C[i2c_num]->int_clr.master_tran_comp = 1;
|
|
I2C[i2c_num]->int_ena.end_detect = 1;
|
|
I2C[i2c_num]->int_ena.master_tran_comp = 1;
|
|
I2C[i2c_num]->ctr.trans_start = 0;
|
|
I2C[i2c_num]->ctr.trans_start = 1;
|
|
return;
|
|
}
|
|
|
|
esp_err_t i2c_master_cmd_begin(i2c_port_t i2c_num, i2c_cmd_handle_t cmd_handle, portBASE_TYPE ticks_to_wait)
|
|
{
|
|
I2C_CHECK(( i2c_num < I2C_NUM_MAX ), I2C_NUM_ERROR_STR, ESP_ERR_INVALID_ARG);
|
|
I2C_CHECK(p_i2c_obj[i2c_num] != NULL, I2C_DRIVER_NOT_INSTALL_ERR_STR, ESP_ERR_INVALID_STATE);
|
|
I2C_CHECK(p_i2c_obj[i2c_num]->mode == I2C_MODE_MASTER, I2C_MASTER_MODE_ERR_STR, ESP_ERR_INVALID_STATE);
|
|
I2C_CHECK(cmd_handle != NULL, I2C_CMD_LINK_INIT_ERR_STR, ESP_ERR_INVALID_ARG);
|
|
|
|
esp_err_t ret;
|
|
i2c_obj_t* p_i2c = p_i2c_obj[i2c_num];
|
|
portTickType ticks_end = xTaskGetTickCount() + ticks_to_wait;
|
|
portBASE_TYPE res = xSemaphoreTake(p_i2c->cmd_mux, ticks_to_wait);
|
|
if (res == pdFALSE) {
|
|
return ESP_ERR_TIMEOUT;
|
|
}
|
|
xSemaphoreTake(p_i2c->cmd_sem, 0);
|
|
i2c_reset_tx_fifo(i2c_num);
|
|
i2c_reset_rx_fifo(i2c_num);
|
|
i2c_cmd_desc_t* cmd = (i2c_cmd_desc_t*) cmd_handle;
|
|
p_i2c->cmd_link.free = cmd->free;
|
|
p_i2c->cmd_link.cur = cmd->cur;
|
|
p_i2c->cmd_link.head = cmd->head;
|
|
p_i2c->status = I2C_STATUS_IDLE;
|
|
p_i2c->cmd_idx = 0;
|
|
p_i2c->rx_cnt = 0;
|
|
p_i2c->tx_fifo_remain = I2C_FIFO_LEN;
|
|
p_i2c->rx_fifo_remain = I2C_FIFO_LEN;
|
|
i2c_reset_tx_fifo(i2c_num);
|
|
i2c_reset_rx_fifo(i2c_num);
|
|
|
|
//start send commands, at most 32 bytes one time, isr handler will process the remaining commands.
|
|
i2c_master_cmd_begin_static(i2c_num);
|
|
ticks_to_wait = ticks_end - xTaskGetTickCount();
|
|
res = xSemaphoreTake(p_i2c->cmd_sem, ticks_to_wait);
|
|
if (res == pdFALSE) {
|
|
ret = ESP_ERR_TIMEOUT;
|
|
} else if (p_i2c->status == I2C_STATUS_ACK_ERROR) {
|
|
ret = ESP_FAIL;
|
|
} else {
|
|
ret = ESP_OK;
|
|
}
|
|
p_i2c->status = I2C_STATUS_DONE;
|
|
xSemaphoreGive(p_i2c->cmd_mux);
|
|
return ret;
|
|
}
|
|
|
|
int i2c_slave_write_buffer(i2c_port_t i2c_num, uint8_t* data, int size, portBASE_TYPE ticks_to_wait)
|
|
{
|
|
I2C_CHECK(( i2c_num < I2C_NUM_MAX ), I2C_NUM_ERROR_STR, ESP_FAIL);
|
|
I2C_CHECK((data != NULL), I2C_ADDR_ERROR_STR, ESP_FAIL);
|
|
I2C_CHECK(p_i2c_obj[i2c_num]->mode == I2C_MODE_SLAVE, I2C_MODE_SLAVE_ERR_STR, ESP_FAIL);
|
|
i2c_obj_t* p_i2c = p_i2c_obj[i2c_num];
|
|
|
|
portBASE_TYPE res;
|
|
int cnt = 0;
|
|
portTickType ticks_end = xTaskGetTickCount() + ticks_to_wait;
|
|
|
|
res = xSemaphoreTake(p_i2c->slv_tx_mux, ticks_to_wait);
|
|
if (res == pdFALSE) {
|
|
return 0;
|
|
}
|
|
ticks_to_wait = ticks_end - xTaskGetTickCount();
|
|
res = xRingbufferSend(p_i2c->tx_ring_buf, data, size, ticks_to_wait);
|
|
if (res == pdFALSE) {
|
|
cnt = 0;
|
|
} else {
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
I2C[i2c_num]->int_clr.tx_fifo_empty = 1;
|
|
I2C[i2c_num]->int_ena.tx_fifo_empty = 1;
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
cnt = size;
|
|
}
|
|
xSemaphoreGive(p_i2c->slv_tx_mux);
|
|
return cnt;
|
|
}
|
|
|
|
static int i2c_slave_read(i2c_port_t i2c_num, uint8_t* data, size_t max_size, portBASE_TYPE ticks_to_wait)
|
|
{
|
|
i2c_obj_t* p_i2c = p_i2c_obj[i2c_num];
|
|
size_t size;
|
|
uint8_t* pdata = (uint8_t*) xRingbufferReceiveUpTo(p_i2c->rx_ring_buf, &size, ticks_to_wait, max_size);
|
|
if (pdata && size > 0) {
|
|
memcpy(data, pdata, size);
|
|
vRingbufferReturnItem(p_i2c->rx_ring_buf, pdata);
|
|
}
|
|
return size;
|
|
}
|
|
|
|
int i2c_slave_read_buffer(i2c_port_t i2c_num, uint8_t* data, size_t max_size, portBASE_TYPE ticks_to_wait)
|
|
{
|
|
I2C_CHECK(( i2c_num < I2C_NUM_MAX ), I2C_NUM_ERROR_STR, ESP_FAIL);
|
|
I2C_CHECK((data != NULL), I2C_ADDR_ERROR_STR, ESP_FAIL);
|
|
I2C_CHECK(p_i2c_obj[i2c_num]->mode == I2C_MODE_SLAVE, I2C_MODE_SLAVE_ERR_STR, ESP_FAIL);
|
|
|
|
i2c_obj_t* p_i2c = p_i2c_obj[i2c_num];
|
|
portBASE_TYPE res;
|
|
portTickType ticks_end = xTaskGetTickCount() + ticks_to_wait;
|
|
res = xSemaphoreTake(p_i2c->slv_rx_mux, ticks_to_wait);
|
|
if (res == pdFALSE) {
|
|
return 0;
|
|
}
|
|
ticks_to_wait = ticks_end - xTaskGetTickCount();
|
|
int cnt = i2c_slave_read(i2c_num, data, max_size, ticks_to_wait);
|
|
if (cnt > 0) {
|
|
I2C_ENTER_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
I2C[i2c_num]->int_ena.rx_fifo_full = 1;
|
|
I2C_EXIT_CRITICAL(&i2c_spinlock[i2c_num]);
|
|
ticks_to_wait = ticks_end - xTaskGetTickCount();
|
|
if (cnt < max_size && ticks_to_wait > 0) {
|
|
cnt += i2c_slave_read(i2c_num, data + cnt, max_size - cnt, ticks_to_wait);
|
|
}
|
|
} else {
|
|
cnt = 0;
|
|
}
|
|
xSemaphoreGive(p_i2c->slv_rx_mux);
|
|
return cnt;
|
|
}
|
|
|
|
|
|
|
|
|