OVMS3-idf/components/bt/bluedroid/bta/include/bta_av_api.h
wangmengyang e07b43e924 component/bt: add AVRC event for remote features indication
1. remove the feature mask parameter from AVRC connection state event, as the AVCTP connection can be initiated by remote device before service discovery to remote device is performed. \
In this case, AVRCP connection state event may not be reported after connection initated by remote device is established.
2. remove ESP_AVRC_CT_MAX_EVT
3. add more documentations to AVRC APIs
2018-01-09 16:33:48 +08:00

813 lines
32 KiB
C

/******************************************************************************
*
* Copyright (C) 2004-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This is the public interface file for the advanced audio/video streaming
* (AV) subsystem of BTA, Broadcom's Bluetooth application layer for mobile
* phones.
*
******************************************************************************/
#ifndef BTA_AV_API_H
#define BTA_AV_API_H
#include "avrc_api.h"
#include "avdt_api.h"
#include "a2d_api.h"
#include "bta_api.h"
#if (BTA_AV_INCLUDED == TRUE)
/*****************************************************************************
** Constants and data types
*****************************************************************************/
/* Set to TRUE if seperate authorization prompt desired for AVCTP besides A2DP authorization */
/* Typically FALSE when AVRCP is used in conjunction with A2DP */
#ifndef BTA_AV_WITH_AVCTP_AUTHORIZATION
#define BTA_AV_WITH_AVCTP_AUTHORIZATION FALSE
#endif
/* AV status values */
#define BTA_AV_SUCCESS 0 /* successful operation */
#define BTA_AV_FAIL 1 /* generic failure */
#define BTA_AV_FAIL_SDP 2 /* service not found */
#define BTA_AV_FAIL_STREAM 3 /* stream connection failed */
#define BTA_AV_FAIL_RESOURCES 4 /* no resources */
#define BTA_AV_FAIL_ROLE 5 /* failed due to role management related issues */
#define BTA_AV_FAIL_GET_CAP 6 /* get capability failed due to no SEP availale on the peer */
typedef UINT8 tBTA_AV_STATUS;
/* AV features masks */
#define BTA_AV_FEAT_RCTG 0x0001 /* remote control target */
#define BTA_AV_FEAT_RCCT 0x0002 /* remote control controller */
#define BTA_AV_FEAT_PROTECT 0x0004 /* streaming media contect protection */
#define BTA_AV_FEAT_VENDOR 0x0008 /* remote control vendor dependent commands */
#define BTA_AV_FEAT_REPORT 0x0020 /* use reporting service for VDP */
#define BTA_AV_FEAT_METADATA 0x0040 /* remote control Metadata Transfer command/response */
#define BTA_AV_FEAT_MULTI_AV 0x0080 /* use multi-av, if controller supports it */
#define BTA_AV_FEAT_BROWSE 0x0010 /* use browsing channel */
#define BTA_AV_FEAT_MASTER 0x0100 /* stream only as master role */
#define BTA_AV_FEAT_ADV_CTRL 0x0200 /* remote control Advanced Control command/response */
#define BTA_AV_FEAT_DELAY_RPT 0x0400 /* allow delay reporting */
#define BTA_AV_FEAT_ACP_START 0x0800 /* start stream when 2nd SNK was accepted */
/* Internal features */
#define BTA_AV_FEAT_NO_SCO_SSPD 0x8000 /* Do not suspend av streaming as to AG events(SCO or Call) */
typedef UINT16 tBTA_AV_FEAT;
/* AV channel values */
#define BTA_AV_CHNL_MSK 0xC0
#define BTA_AV_CHNL_AUDIO 0x40 /* audio channel */
#define BTA_AV_CHNL_VIDEO 0x80 /* video channel */
typedef UINT8 tBTA_AV_CHNL;
#define BTA_AV_HNDL_MSK 0x3F
typedef UINT8 tBTA_AV_HNDL;
/* handle index to mask */
#define BTA_AV_HNDL_TO_MSK(h) ((UINT8)(1 << (h)))
/* tBTA_AV_HNDL to mask */
#define BTA_AV_HNDL_TYPE_TO_MSK(h) ((UINT8)(1 << (h&BTA_AV_HNDL_MSK)))
/* offset of codec type in codec info byte array */
#define BTA_AV_CODEC_TYPE_IDX AVDT_CODEC_TYPE_INDEX /* 2 */
/* maximum number of streams created: 1 for audio, 1 for video */
#ifndef BTA_AV_NUM_STRS
#define BTA_AV_NUM_STRS 2
#endif
#ifndef BTA_AV_MAX_SEPS
#define BTA_AV_MAX_SEPS 2
#endif
#ifndef BTA_AV_MAX_A2DP_MTU
/*#define BTA_AV_MAX_A2DP_MTU 668 //224 (DM5) * 3 - 4(L2CAP header) */
#define BTA_AV_MAX_A2DP_MTU 1008
#endif
#ifndef BTA_AV_MAX_VDP_MTU
#define BTA_AV_MAX_VDP_MTU 1008
#endif
/* codec type */
#define BTA_AV_CODEC_SBC A2D_MEDIA_CT_SBC /* SBC media codec type */
#define BTA_AV_CODEC_M12 A2D_MEDIA_CT_M12 /* MPEG-1, 2 Audio media codec type */
#define BTA_AV_CODEC_M24 A2D_MEDIA_CT_M24 /* MPEG-2, 4 AAC media codec type */
#define BTA_AV_CODEC_ATRAC A2D_MEDIA_CT_ATRAC /* ATRAC family media codec type */
#define BTA_AV_CODEC_H263_P0 VDP_MEDIA_CT_H263_P0 /* H.263 baseline (profile 0) */
#define BTA_AV_CODEC_MPEG4 VDP_MEDIA_CT_MPEG4 /* MPEG-4 Visual Simple Profile */
#define BTA_AV_CODEC_H263_P3 VDP_MEDIA_CT_H263_P3 /* H.263 profile 3 */
#define BTA_AV_CODEC_H263_P8 VDP_MEDIA_CT_H263_P8 /* H.263 profile 8 */
#define BTA_AV_CODEC_VEND VDP_MEDIA_CT_VEND /* Non-VDP */
typedef UINT8 tBTA_AV_CODEC;
/* Company ID in BT assigned numbers */
#define BTA_AV_BT_VENDOR_ID VDP_BT_VENDOR_ID /* Broadcom Corporation */
/* vendor specific codec ID */
#define BTA_AV_CODEC_ID_H264 VDP_CODEC_ID_H264 /* Non-VDP codec ID - H.264 */
#define BTA_AV_CODEC_ID_IMG VDP_CODEC_ID_IMG /* Non-VDP codec ID - images/slideshow */
/* operation id list for BTA_AvRemoteCmd */
#define BTA_AV_RC_SELECT AVRC_ID_SELECT /* select */
#define BTA_AV_RC_UP AVRC_ID_UP /* up */
#define BTA_AV_RC_DOWN AVRC_ID_DOWN /* down */
#define BTA_AV_RC_LEFT AVRC_ID_LEFT /* left */
#define BTA_AV_RC_RIGHT AVRC_ID_RIGHT /* right */
#define BTA_AV_RC_RIGHT_UP AVRC_ID_RIGHT_UP /* right-up */
#define BTA_AV_RC_RIGHT_DOWN AVRC_ID_RIGHT_DOWN /* right-down */
#define BTA_AV_RC_LEFT_UP AVRC_ID_LEFT_UP /* left-up */
#define BTA_AV_RC_LEFT_DOWN AVRC_ID_LEFT_DOWN /* left-down */
#define BTA_AV_RC_ROOT_MENU AVRC_ID_ROOT_MENU /* root menu */
#define BTA_AV_RC_SETUP_MENU AVRC_ID_SETUP_MENU /* setup menu */
#define BTA_AV_RC_CONT_MENU AVRC_ID_CONT_MENU /* contents menu */
#define BTA_AV_RC_FAV_MENU AVRC_ID_FAV_MENU /* favorite menu */
#define BTA_AV_RC_EXIT AVRC_ID_EXIT /* exit */
#define BTA_AV_RC_0 AVRC_ID_0 /* 0 */
#define BTA_AV_RC_1 AVRC_ID_1 /* 1 */
#define BTA_AV_RC_2 AVRC_ID_2 /* 2 */
#define BTA_AV_RC_3 AVRC_ID_3 /* 3 */
#define BTA_AV_RC_4 AVRC_ID_4 /* 4 */
#define BTA_AV_RC_5 AVRC_ID_5 /* 5 */
#define BTA_AV_RC_6 AVRC_ID_6 /* 6 */
#define BTA_AV_RC_7 AVRC_ID_7 /* 7 */
#define BTA_AV_RC_8 AVRC_ID_8 /* 8 */
#define BTA_AV_RC_9 AVRC_ID_9 /* 9 */
#define BTA_AV_RC_DOT AVRC_ID_DOT /* dot */
#define BTA_AV_RC_ENTER AVRC_ID_ENTER /* enter */
#define BTA_AV_RC_CLEAR AVRC_ID_CLEAR /* clear */
#define BTA_AV_RC_CHAN_UP AVRC_ID_CHAN_UP /* channel up */
#define BTA_AV_RC_CHAN_DOWN AVRC_ID_CHAN_DOWN /* channel down */
#define BTA_AV_RC_PREV_CHAN AVRC_ID_PREV_CHAN /* previous channel */
#define BTA_AV_RC_SOUND_SEL AVRC_ID_SOUND_SEL /* sound select */
#define BTA_AV_RC_INPUT_SEL AVRC_ID_INPUT_SEL /* input select */
#define BTA_AV_RC_DISP_INFO AVRC_ID_DISP_INFO /* display information */
#define BTA_AV_RC_HELP AVRC_ID_HELP /* help */
#define BTA_AV_RC_PAGE_UP AVRC_ID_PAGE_UP /* page up */
#define BTA_AV_RC_PAGE_DOWN AVRC_ID_PAGE_DOWN /* page down */
#define BTA_AV_RC_POWER AVRC_ID_POWER /* power */
#define BTA_AV_RC_VOL_UP AVRC_ID_VOL_UP /* volume up */
#define BTA_AV_RC_VOL_DOWN AVRC_ID_VOL_DOWN /* volume down */
#define BTA_AV_RC_MUTE AVRC_ID_MUTE /* mute */
#define BTA_AV_RC_PLAY AVRC_ID_PLAY /* play */
#define BTA_AV_RC_STOP AVRC_ID_STOP /* stop */
#define BTA_AV_RC_PAUSE AVRC_ID_PAUSE /* pause */
#define BTA_AV_RC_RECORD AVRC_ID_RECORD /* record */
#define BTA_AV_RC_REWIND AVRC_ID_REWIND /* rewind */
#define BTA_AV_RC_FAST_FOR AVRC_ID_FAST_FOR /* fast forward */
#define BTA_AV_RC_EJECT AVRC_ID_EJECT /* eject */
#define BTA_AV_RC_FORWARD AVRC_ID_FORWARD /* forward */
#define BTA_AV_RC_BACKWARD AVRC_ID_BACKWARD /* backward */
#define BTA_AV_RC_ANGLE AVRC_ID_ANGLE /* angle */
#define BTA_AV_RC_SUBPICT AVRC_ID_SUBPICT /* subpicture */
#define BTA_AV_RC_F1 AVRC_ID_F1 /* F1 */
#define BTA_AV_RC_F2 AVRC_ID_F2 /* F2 */
#define BTA_AV_RC_F3 AVRC_ID_F3 /* F3 */
#define BTA_AV_RC_F4 AVRC_ID_F4 /* F4 */
#define BTA_AV_RC_F5 AVRC_ID_F5 /* F5 */
#define BTA_AV_VENDOR AVRC_ID_VENDOR /* vendor unique */
typedef UINT8 tBTA_AV_RC;
/* state flag for pass through command */
#define BTA_AV_STATE_PRESS AVRC_STATE_PRESS /* key pressed */
#define BTA_AV_STATE_RELEASE AVRC_STATE_RELEASE /* key released */
typedef UINT8 tBTA_AV_STATE;
/* command codes for BTA_AvVendorCmd */
#define BTA_AV_CMD_CTRL AVRC_CMD_CTRL
#define BTA_AV_CMD_STATUS AVRC_CMD_STATUS
#define BTA_AV_CMD_SPEC_INQ AVRC_CMD_SPEC_INQ
#define BTA_AV_CMD_NOTIF AVRC_CMD_NOTIF
#define BTA_AV_CMD_GEN_INQ AVRC_CMD_GEN_INQ
typedef UINT8 tBTA_AV_CMD;
/* response codes for BTA_AvVendorRsp */
#define BTA_AV_RSP_NOT_IMPL AVRC_RSP_NOT_IMPL
#define BTA_AV_RSP_ACCEPT AVRC_RSP_ACCEPT
#define BTA_AV_RSP_REJ AVRC_RSP_REJ
#define BTA_AV_RSP_IN_TRANS AVRC_RSP_IN_TRANS
#define BTA_AV_RSP_IMPL_STBL AVRC_RSP_IMPL_STBL
#define BTA_AV_RSP_CHANGED AVRC_RSP_CHANGED
#define BTA_AV_RSP_INTERIM AVRC_RSP_INTERIM
typedef UINT8 tBTA_AV_CODE;
/* error codes for BTA_AvProtectRsp */
#define BTA_AV_ERR_NONE A2D_SUCCESS /* Success, no error */
#define BTA_AV_ERR_BAD_STATE AVDT_ERR_BAD_STATE /* Message cannot be processed in this state */
#define BTA_AV_ERR_RESOURCE AVDT_ERR_RESOURCE /* Insufficient resources */
#define BTA_AV_ERR_BAD_CP_TYPE A2D_BAD_CP_TYPE /* The requested Content Protection Type is not supported */
#define BTA_AV_ERR_BAD_CP_FORMAT A2D_BAD_CP_FORMAT /* The format of Content Protection Data is not correct */
typedef UINT8 tBTA_AV_ERR;
/* AV callback events */
#define BTA_AV_ENABLE_EVT 0 /* AV enabled */
#define BTA_AV_REGISTER_EVT 1 /* registered to AVDT */
#define BTA_AV_OPEN_EVT 2 /* connection opened */
#define BTA_AV_CLOSE_EVT 3 /* connection closed */
#define BTA_AV_START_EVT 4 /* stream data transfer started */
#define BTA_AV_STOP_EVT 5 /* stream data transfer stopped */
#define BTA_AV_PROTECT_REQ_EVT 6 /* content protection request */
#define BTA_AV_PROTECT_RSP_EVT 7 /* content protection response */
#define BTA_AV_RC_OPEN_EVT 8 /* remote control channel open */
#define BTA_AV_RC_CLOSE_EVT 9 /* remote control channel closed */
#define BTA_AV_REMOTE_CMD_EVT 10 /* remote control command */
#define BTA_AV_REMOTE_RSP_EVT 11 /* remote control response */
#define BTA_AV_VENDOR_CMD_EVT 12 /* vendor dependent remote control command */
#define BTA_AV_VENDOR_RSP_EVT 13 /* vendor dependent remote control response */
#define BTA_AV_RECONFIG_EVT 14 /* reconfigure response */
#define BTA_AV_SUSPEND_EVT 15 /* suspend response */
#define BTA_AV_PENDING_EVT 16 /* incoming connection pending:
* signal channel is open and stream is not open
* after BTA_AV_SIG_TIME_VAL ms */
#define BTA_AV_META_MSG_EVT 17 /* metadata messages */
#define BTA_AV_REJECT_EVT 18 /* incoming connection rejected */
#define BTA_AV_RC_FEAT_EVT 19 /* remote control channel peer supported features update */
#define BTA_AV_MEDIA_SINK_CFG_EVT 20 /* command to configure codec */
#define BTA_AV_MEDIA_DATA_EVT 21 /* sending data to Media Task */
/* Max BTA event */
#define BTA_AV_MAX_EVT 22
/* function types for call-out functions */
typedef BOOLEAN (*tBTA_AV_CO_INIT) (UINT8 *p_codec_type, UINT8 *p_codec_info,
UINT8 *p_num_protect, UINT8 *p_protect_info, UINT8 index);
typedef void (*tBTA_AV_CO_DISC_RES) (tBTA_AV_HNDL hndl, UINT8 num_seps,
UINT8 num_snk, UINT8 num_src, BD_ADDR addr, UINT16 uuid_local);
typedef UINT8 (*tBTA_AV_CO_GETCFG) (tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
UINT8 *p_codec_info, UINT8 *p_sep_info_idx, UINT8 seid,
UINT8 *p_num_protect, UINT8 *p_protect_info);
typedef void (*tBTA_AV_CO_SETCFG) (tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
UINT8 *p_codec_info, UINT8 seid, BD_ADDR addr,
UINT8 num_protect, UINT8 *p_protect_info,
UINT8 t_local_sep, UINT8 avdt_handle);
typedef void (*tBTA_AV_CO_OPEN) (tBTA_AV_HNDL hndl,
tBTA_AV_CODEC codec_type, UINT8 *p_codec_info,
UINT16 mtu);
typedef void (*tBTA_AV_CO_CLOSE) (tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type, UINT16 mtu);
typedef void (*tBTA_AV_CO_START) (tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type, UINT8 *p_codec_info, BOOLEAN *p_no_rtp_hdr);
typedef void (*tBTA_AV_CO_STOP) (tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type);
typedef void *(*tBTA_AV_CO_DATAPATH) (tBTA_AV_CODEC codec_type,
UINT32 *p_len, UINT32 *p_timestamp);
typedef void (*tBTA_AV_CO_DELAY) (tBTA_AV_HNDL hndl, UINT16 delay);
/* the call-out functions for one stream */
typedef struct {
tBTA_AV_CO_INIT init;
tBTA_AV_CO_DISC_RES disc_res;
tBTA_AV_CO_GETCFG getcfg;
tBTA_AV_CO_SETCFG setcfg;
tBTA_AV_CO_OPEN open;
tBTA_AV_CO_CLOSE close;
tBTA_AV_CO_START start;
tBTA_AV_CO_STOP stop;
tBTA_AV_CO_DATAPATH data;
tBTA_AV_CO_DELAY delay;
} tBTA_AV_CO_FUNCTS;
typedef UINT8 tBTA_AV_EVT;
/* Event associated with BTA_AV_ENABLE_EVT */
typedef struct {
tBTA_AV_FEAT features;
} tBTA_AV_ENABLE;
/* Event associated with BTA_AV_REGISTER_EVT */
typedef struct {
tBTA_AV_CHNL chnl; /* audio/video */
tBTA_AV_HNDL hndl; /* Handle associated with the stream. */
UINT8 app_id; /* ID associated with call to BTA_AvRegister() */
tBTA_AV_STATUS status;
tBTA_AV_CO_FUNCTS *p_bta_av_cos;
} tBTA_AV_REGISTER;
/* data associated with BTA_AV_OPEN_EVT */
#define BTA_AV_EDR_2MBPS 0x01
#define BTA_AV_EDR_3MBPS 0x02
typedef UINT8 tBTA_AV_EDR;
typedef struct {
tBTA_AV_CHNL chnl;
tBTA_AV_HNDL hndl;
BD_ADDR bd_addr;
tBTA_AV_STATUS status;
BOOLEAN starting;
tBTA_AV_EDR edr; /* 0, if peer device does not support EDR */
UINT8 sep; /* sep type of peer device */
} tBTA_AV_OPEN;
/* data associated with BTA_AV_CLOSE_EVT */
typedef struct {
tBTA_AV_CHNL chnl;
tBTA_AV_HNDL hndl;
UINT8 disc_rsn; /* disconnection reason */
} tBTA_AV_CLOSE;
/* data associated with BTA_AV_START_EVT */
typedef struct {
tBTA_AV_CHNL chnl;
tBTA_AV_HNDL hndl;
tBTA_AV_STATUS status;
BOOLEAN initiator; /* TRUE, if local device initiates the START */
BOOLEAN suspending;
} tBTA_AV_START;
/* data associated with BTA_AV_SUSPEND_EVT */
typedef struct {
tBTA_AV_CHNL chnl;
tBTA_AV_HNDL hndl;
BOOLEAN initiator; /* TRUE, if local device initiates the SUSPEND */
tBTA_AV_STATUS status;
} tBTA_AV_SUSPEND;
/* data associated with BTA_AV_RECONFIG_EVT */
typedef struct {
tBTA_AV_CHNL chnl;
tBTA_AV_HNDL hndl;
tBTA_AV_STATUS status;
} tBTA_AV_RECONFIG;
/* data associated with BTA_AV_PROTECT_REQ_EVT */
typedef struct {
tBTA_AV_CHNL chnl;
tBTA_AV_HNDL hndl;
UINT8 *p_data;
UINT16 len;
} tBTA_AV_PROTECT_REQ;
/* data associated with BTA_AV_PROTECT_RSP_EVT */
typedef struct {
tBTA_AV_CHNL chnl;
tBTA_AV_HNDL hndl;
UINT8 *p_data;
UINT16 len;
tBTA_AV_ERR err_code;
} tBTA_AV_PROTECT_RSP;
/* data associated with BTA_AV_RC_OPEN_EVT */
typedef struct {
UINT8 rc_handle;
BOOLEAN sdp_disc_done;
tBTA_AV_FEAT peer_features;
BD_ADDR peer_addr;
tBTA_AV_STATUS status;
} tBTA_AV_RC_OPEN;
/* data associated with BTA_AV_RC_CLOSE_EVT */
typedef struct {
UINT8 rc_handle;
BD_ADDR peer_addr;
} tBTA_AV_RC_CLOSE;
/* data associated with BTA_AV_RC_FEAT_EVT */
typedef struct {
UINT8 rc_handle;
tBTA_AV_FEAT peer_features;
} tBTA_AV_RC_FEAT;
/* data associated with BTA_AV_REMOTE_CMD_EVT */
typedef struct {
UINT8 rc_handle;
tBTA_AV_RC rc_id;
tBTA_AV_STATE key_state;
UINT8 len;
UINT8 *p_data;
tAVRC_HDR hdr; /* Message header. */
UINT8 label;
} tBTA_AV_REMOTE_CMD;
/* data associated with BTA_AV_REMOTE_RSP_EVT */
typedef struct {
UINT8 rc_handle;
tBTA_AV_RC rc_id;
tBTA_AV_STATE key_state;
UINT8 len;
UINT8 *p_data;
tBTA_AV_CODE rsp_code;
UINT8 label;
} tBTA_AV_REMOTE_RSP;
/* data associated with BTA_AV_VENDOR_CMD_EVT, BTA_AV_VENDOR_RSP_EVT */
typedef struct {
UINT8 rc_handle;
UINT16 len; /* Max vendor dependent message is 512 */
UINT8 label;
tBTA_AV_CODE code;
UINT32 company_id;
UINT8 *p_data;
} tBTA_AV_VENDOR;
/* data associated with BTA_AV_META_MSG_EVT */
typedef struct {
UINT8 rc_handle;
UINT16 len;
UINT8 label;
tBTA_AV_CODE code;
UINT32 company_id;
UINT8 *p_data;
tAVRC_MSG *p_msg;
} tBTA_AV_META_MSG;
/* data associated with BTA_AV_PENDING_EVT */
typedef struct {
BD_ADDR bd_addr;
} tBTA_AV_PEND;
/* data associated with BTA_AV_REJECT_EVT */
typedef struct {
BD_ADDR bd_addr;
tBTA_AV_HNDL hndl; /* Handle associated with the stream that rejected the connection. */
} tBTA_AV_REJECT;
/* union of data associated with AV callback */
typedef union {
tBTA_AV_CHNL chnl;
tBTA_AV_ENABLE enable;
tBTA_AV_REGISTER registr;
tBTA_AV_OPEN open;
tBTA_AV_CLOSE close;
tBTA_AV_START start;
tBTA_AV_PROTECT_REQ protect_req;
tBTA_AV_PROTECT_RSP protect_rsp;
tBTA_AV_RC_OPEN rc_open;
tBTA_AV_RC_CLOSE rc_close;
tBTA_AV_REMOTE_CMD remote_cmd;
tBTA_AV_REMOTE_RSP remote_rsp;
tBTA_AV_VENDOR vendor_cmd;
tBTA_AV_VENDOR vendor_rsp;
tBTA_AV_RECONFIG reconfig;
tBTA_AV_SUSPEND suspend;
tBTA_AV_PEND pend;
tBTA_AV_META_MSG meta_msg;
tBTA_AV_REJECT reject;
tBTA_AV_RC_FEAT rc_feat;
} tBTA_AV;
/* union of data associated with AV Media callback */
typedef union {
BT_HDR *p_data;
UINT8 *codec_info;
} tBTA_AV_MEDIA;
#define BTA_AVC_PACKET_LEN AVRC_PACKET_LEN
#define BTA_VENDOR_DATA_OFFSET 6
#define BTA_VENDOR_HEADER_LEN 4
#define BTA_MAX_VENDOR_DEPENDENT_DATA_LEN (BTA_AVC_PACKET_LEN-BTA_VENDOR_DATA_OFFSET-BTA_VENDOR_HEADER_LEN)
#define BTA_GROUP_NAVI_MSG_OP_DATA_LEN 5
#define BTA_ERROR_INVALID_CMD AVRC_STS_BAD_CMD
#define BTA_ERROR_INVALID_PARAM AVRC_STS_BAD_PARAM
#define BTA_ERROR_BAD_CONTENTS AVRC_STS_NOT_FOUND
#define BTA_ERROR_INTERNAL AVRC_STS_INTERNAL_ERR
#define BTA_AV_META_SINGLE_PACKET AVRC_PKT_SINGLE
#define BTA_AV_CO_METADATA AVRC_CO_METADATA
/* AV callback */
typedef void (tBTA_AV_CBACK)(tBTA_AV_EVT event, tBTA_AV *p_data);
typedef void (tBTA_AV_DATA_CBACK)(tBTA_AV_EVT event, tBTA_AV_MEDIA *p_data);
/* type for stream state machine action functions */
typedef void (*tBTA_AV_ACT)(void *p_cb, void *p_data);
/* type for registering VDP */
typedef void (tBTA_AV_REG) (tAVDT_CS *p_cs, char *p_service_name, void *p_data);
/* AV configuration structure */
typedef struct {
UINT32 company_id; /* AVRCP Company ID */
UINT16 avrc_mtu; /* AVRCP MTU at L2CAP for control channel */
UINT16 avrc_br_mtu; /* AVRCP MTU at L2CAP for browsing channel */
UINT16 avrc_ct_cat; /* AVRCP controller categories */
UINT16 avrc_tg_cat; /* AVRCP target categories */
UINT16 sig_mtu; /* AVDTP signaling channel MTU at L2CAP */
UINT16 audio_mtu; /* AVDTP audio transport channel MTU at L2CAP */
const UINT16 *p_audio_flush_to;/* AVDTP audio transport channel flush timeout */
UINT16 audio_mqs; /* AVDTP audio channel max data queue size */
UINT16 video_mtu; /* AVDTP video transport channel MTU at L2CAP */
UINT16 video_flush_to; /* AVDTP video transport channel flush timeout */
BOOLEAN avrc_group; /* TRUE, to accept AVRC 1.3 group nevigation command */
UINT8 num_co_ids; /* company id count in p_meta_co_ids */
UINT8 num_evt_ids; /* event id count in p_meta_evt_ids */
tBTA_AV_CODE rc_pass_rsp; /* the default response code for pass through commands */
const UINT32 *p_meta_co_ids;/* the metadata Get Capabilities response for company id */
const UINT8 *p_meta_evt_ids;/* the the metadata Get Capabilities response for event id */
const tBTA_AV_ACT *p_act_tbl;/* the action function table for VDP stream */
tBTA_AV_REG *p_reg; /* action function to register VDP */
char avrc_controller_name[BTA_SERVICE_NAME_LEN]; /* Default AVRCP controller name */
char avrc_target_name[BTA_SERVICE_NAME_LEN]; /* Default AVRCP target name*/
} tBTA_AV_CFG;
#ifdef __cplusplus
extern "C"
{
#endif
/*****************************************************************************
** External Function Declarations
*****************************************************************************/
/*******************************************************************************
**
** Function BTA_AvEnable
**
** Description Enable the advanced audio/video service. When the enable
** operation is complete the callback function will be
** called with a BTA_AV_ENABLE_EVT. This function must
** be called before other function in the AV API are
** called.
**
** Returns void
**
*******************************************************************************/
void BTA_AvEnable(tBTA_SEC sec_mask, tBTA_AV_FEAT features,
tBTA_AV_CBACK *p_cback);
/*******************************************************************************
**
** Function BTA_AvDisable
**
** Description Disable the advanced audio/video service.
**
**
** Returns void
**
*******************************************************************************/
void BTA_AvDisable(void);
/*******************************************************************************
**
** Function BTA_AvRegister
**
** Description Register the audio or video service to stack. When the
** operation is complete the callback function will be
** called with a BTA_AV_REGISTER_EVT. This function must
** be called before AVDT stream is open.
**
**
** Returns void
**
*******************************************************************************/
void BTA_AvRegister(tBTA_AV_CHNL chnl, const char *p_service_name,
UINT8 app_id, tBTA_AV_DATA_CBACK *p_data_cback, tBTA_AV_CO_FUNCTS *bta_av_cos);
/*******************************************************************************
**
** Function BTA_AvDeregister
**
** Description Deregister the audio or video service
**
** Returns void
**
*******************************************************************************/
void BTA_AvDeregister(tBTA_AV_HNDL hndl);
/*******************************************************************************
**
** Function BTA_AvOpen
**
** Description Opens an advanced audio/video connection to a peer device.
** When connection is open callback function is called
** with a BTA_AV_OPEN_EVT.
**
** Returns void
**
*******************************************************************************/
void BTA_AvOpen(BD_ADDR bd_addr, tBTA_AV_HNDL handle,
BOOLEAN use_rc, tBTA_SEC sec_mask, UINT16 uuid);
/*******************************************************************************
**
** Function BTA_AvClose
**
** Description Close the current streams.
**
** Returns void
**
*******************************************************************************/
void BTA_AvClose(tBTA_AV_HNDL handle);
/*******************************************************************************
**
** Function BTA_AvDisconnect
**
** Description Close the connection to the address.
**
** Returns void
**
*******************************************************************************/
void BTA_AvDisconnect(BD_ADDR bd_addr);
/*******************************************************************************
**
** Function BTA_AvEnable_Sink
**
** Description Enable/Disable A2DP Sink.
**
** Returns void
**
*******************************************************************************/
void BTA_AvEnable_Sink(int enable);
/*******************************************************************************
**
** Function BTA_AvStart
**
** Description Start audio/video stream data transfer.
**
** Returns void
**
*******************************************************************************/
void BTA_AvStart(void);
/*******************************************************************************
**
** Function BTA_AvStop
**
** Description Stop audio/video stream data transfer.
** If suspend is TRUE, this function sends AVDT suspend signal
** to the connected peer(s).
**
** Returns void
**
*******************************************************************************/
void BTA_AvStop(BOOLEAN suspend);
/*******************************************************************************
**
** Function BTA_AvReconfig
**
** Description Reconfigure the audio/video stream.
** If suspend is TRUE, this function tries the suspend/reconfigure
** procedure first.
** If suspend is FALSE or when suspend/reconfigure fails,
** this function closes and re-opens the AVDT connection.
**
** Returns void
**
*******************************************************************************/
void BTA_AvReconfig(tBTA_AV_HNDL hndl, BOOLEAN suspend, UINT8 sep_info_idx,
UINT8 *p_codec_info, UINT8 num_protect, UINT8 *p_protect_info);
/*******************************************************************************
**
** Function BTA_AvProtectReq
**
** Description Send a content protection request. This function can only
** be used if AV is enabled with feature BTA_AV_FEAT_PROTECT.
**
** Returns void
**
*******************************************************************************/
void BTA_AvProtectReq(tBTA_AV_HNDL hndl, UINT8 *p_data, UINT16 len);
/*******************************************************************************
**
** Function BTA_AvProtectRsp
**
** Description Send a content protection response. This function must
** be called if a BTA_AV_PROTECT_REQ_EVT is received.
** This function can only be used if AV is enabled with
** feature BTA_AV_FEAT_PROTECT.
**
** Returns void
**
*******************************************************************************/
void BTA_AvProtectRsp(tBTA_AV_HNDL hndl, UINT8 error_code, UINT8 *p_data,
UINT16 len);
/*******************************************************************************
**
** Function BTA_AvRemoteCmd
**
** Description Send a remote control command. This function can only
** be used if AV is enabled with feature BTA_AV_FEAT_RCCT.
**
** Returns void
**
*******************************************************************************/
void BTA_AvRemoteCmd(UINT8 rc_handle, UINT8 label, tBTA_AV_RC rc_id,
tBTA_AV_STATE key_state);
/*******************************************************************************
**
** Function BTA_AvVendorCmd
**
** Description Send a vendor dependent remote control command. This
** function can only be used if AV is enabled with feature
** BTA_AV_FEAT_VENDOR.
**
** Returns void
**
*******************************************************************************/
void BTA_AvVendorCmd(UINT8 rc_handle, UINT8 label, tBTA_AV_CODE cmd_code,
UINT8 *p_data, UINT16 len);
/*******************************************************************************
**
** Function BTA_AvVendorRsp
**
** Description Send a vendor dependent remote control response.
** This function must be called if a BTA_AV_VENDOR_CMD_EVT
** is received. This function can only be used if AV is
** enabled with feature BTA_AV_FEAT_VENDOR.
**
** Returns void
**
*******************************************************************************/
void BTA_AvVendorRsp(UINT8 rc_handle, UINT8 label, tBTA_AV_CODE rsp_code,
UINT8 *p_data, UINT16 len, UINT32 company_id);
/*******************************************************************************
**
** Function BTA_AvOpenRc
**
** Description Open an AVRCP connection toward the device with the
** specified handle
**
** Returns void
**
*******************************************************************************/
void BTA_AvOpenRc(tBTA_AV_HNDL handle);
/*******************************************************************************
**
** Function BTA_AvCloseRc
**
** Description Close an AVRCP connection
**
** Returns void
**
*******************************************************************************/
void BTA_AvCloseRc(UINT8 rc_handle);
/*******************************************************************************
**
** Function BTA_AvMetaRsp
**
** Description Send a Metadata command/response. The message contained
** in p_pkt can be composed with AVRC utility functions.
** This function can only be used if AV is enabled with feature
** BTA_AV_FEAT_METADATA.
**
** Returns void
**
*******************************************************************************/
void BTA_AvMetaRsp(UINT8 rc_handle, UINT8 label, tBTA_AV_CODE rsp_code,
BT_HDR *p_pkt);
/*******************************************************************************
**
** Function BTA_AvMetaCmd
**
** Description Send a Metadata/Advanced Control command. The message contained
** in p_pkt can be composed with AVRC utility functions.
** This function can only be used if AV is enabled with feature
** BTA_AV_FEAT_METADATA.
** This message is sent only when the peer supports the TG role.
*8 The only command makes sense right now is the absolute volume command.
**
** Returns void
**
*******************************************************************************/
void BTA_AvMetaCmd(UINT8 rc_handle, UINT8 label, tBTA_AV_CMD cmd_code, BT_HDR *p_pkt);
#ifdef __cplusplus
}
#endif
#endif ///BTA_AV_INCLUDED == TRUE
#endif /* BTA_AV_API_H */