5c5d5f0acb
lwip: Increase minimum TCP/IP task stack size if log level is Debug or Verbose See merge request !1396
376 lines
13 KiB
Plaintext
376 lines
13 KiB
Plaintext
menu "LWIP"
|
|
|
|
config L2_TO_L3_COPY
|
|
bool "Enable copy between Layer2 and Layer3 packets"
|
|
default n
|
|
help
|
|
If this feature is enabled, all traffic from layer2(WIFI Driver) will be
|
|
copied to a new buffer before sending it to layer3(LWIP stack), freeing
|
|
the layer2 buffer.
|
|
Please be notified that the total layer2 receiving buffer is fixed and
|
|
ESP32 currently supports 25 layer2 receiving buffer, when layer2 buffer
|
|
runs out of memory, then the incoming packets will be dropped in hardware.
|
|
The layer3 buffer is allocated from the heap, so the total layer3 receiving
|
|
buffer depends on the available heap size, when heap runs out of memory,
|
|
no copy will be sent to layer3 and packet will be dropped in layer2.
|
|
Please make sure you fully understand the impact of this feature before
|
|
enabling it.
|
|
|
|
config LWIP_MAX_SOCKETS
|
|
int "Max number of open sockets"
|
|
range 1 32
|
|
default 10
|
|
help
|
|
Sockets take up a certain amount of memory, and allowing fewer
|
|
sockets to be open at the same time conserves memory. Specify
|
|
the maximum amount of sockets here. The valid value is from 1
|
|
to 16.
|
|
|
|
config LWIP_SO_REUSE
|
|
bool "Enable SO_REUSEADDR option"
|
|
default y
|
|
help
|
|
Enabling this option allows binding to a port which remains in
|
|
TIME_WAIT.
|
|
|
|
config LWIP_SO_REUSE_RXTOALL
|
|
bool "SO_REUSEADDR copies broadcast/multicast to all matches"
|
|
depends on LWIP_SO_REUSE
|
|
default y
|
|
help
|
|
Enabling this option means that any incoming broadcast or multicast
|
|
packet will be copied to all of the local sockets that it matches
|
|
(may be more than one if SO_REUSEADDR is set on the socket.)
|
|
|
|
This increases memory overhead as the packets need to be copied,
|
|
however they are only copied per matching socket. You can safely
|
|
disable it if you don't plan to receive broadcast or multicast
|
|
traffic on more than one socket at a time.
|
|
|
|
config LWIP_SO_RCVBUF
|
|
bool "Enable SO_RCVBUF option"
|
|
default n
|
|
help
|
|
Enabling this option allows checking for available data on a netconn.
|
|
|
|
config LWIP_DHCP_MAX_NTP_SERVERS
|
|
int "Maximum number of NTP servers"
|
|
default 1
|
|
range 1 16
|
|
help
|
|
Set maximum number of NTP servers used by LwIP SNTP module.
|
|
First argument of sntp_setserver/sntp_setservername functions
|
|
is limited to this value.
|
|
|
|
config LWIP_IP_FRAG
|
|
bool "Enable fragment outgoing IP packets"
|
|
default n
|
|
help
|
|
Enabling this option allows fragmenting outgoing IP packets if their size
|
|
exceeds MTU.
|
|
|
|
config LWIP_IP_REASSEMBLY
|
|
bool "Enable reassembly incoming fragmented IP packets"
|
|
default n
|
|
help
|
|
Enabling this option allows reassemblying incoming fragmented IP packets.
|
|
|
|
config LWIP_STATS
|
|
bool "Enable LWIP statistics"
|
|
default n
|
|
help
|
|
Enabling this option allows LWIP statistics
|
|
|
|
config LWIP_ETHARP_TRUST_IP_MAC
|
|
bool "Enable LWIP ARP trust"
|
|
default y
|
|
help
|
|
Enabling this option allows ARP table to be updated.
|
|
|
|
If this option is enabled, the incoming IP packets cause the ARP table to be
|
|
updated with the source MAC and IP addresses supplied in the packet.
|
|
You may want to disable this if you do not trust LAN peers to have the
|
|
correct addresses, or as a limited approach to attempt to handle
|
|
spoofing. If disabled, lwIP will need to make a new ARP request if
|
|
the peer is not already in the ARP table, adding a little latency.
|
|
The peer *is* in the ARP table if it requested our address before.
|
|
Also notice that this slows down input processing of every IP packet!
|
|
|
|
config TCPIP_RECVMBOX_SIZE
|
|
int "TCPIP receive mail box size"
|
|
default 32
|
|
range 6 64
|
|
help
|
|
Set TCPIP receive mail box size. Generally bigger value means higher throughput
|
|
but more memory. The value should be bigger than UDP/TCP mail box size.
|
|
|
|
config LWIP_DHCP_DOES_ARP_CHECK
|
|
bool "DHCP: Perform ARP check on any offered address"
|
|
default y
|
|
help
|
|
Enabling this option performs a check (via ARP request) if the offered IP address
|
|
is not already in use by another host on the network.
|
|
|
|
menuconfig LWIP_AUTOIP
|
|
bool "Enable IPV4 Link-Local Addressing (AUTOIP)"
|
|
default n
|
|
help
|
|
Enabling this option allows the device to self-assign an address
|
|
in the 169.256/16 range if none is assigned statically or via DHCP.
|
|
|
|
See RFC 3927.
|
|
|
|
config LWIP_AUTOIP_TRIES
|
|
int "DHCP Probes before self-assigning IPv4 LL address"
|
|
range 1 100
|
|
default 2
|
|
depends on LWIP_AUTOIP
|
|
help
|
|
DHCP client will send this many probes before self-assigning a
|
|
link local address.
|
|
|
|
From LWIP help: "This can be set as low as 1 to get an AutoIP
|
|
address very quickly, but you should be prepared to handle a
|
|
changing IP address when DHCP overrides AutoIP." (In the case of
|
|
ESP-IDF, this means multiple SYSTEM_EVENT_STA_GOT_IP events.)
|
|
|
|
config LWIP_AUTOIP_MAX_CONFLICTS
|
|
int "Max IP conflicts before rate limiting"
|
|
range 1 100
|
|
default 9
|
|
depends on LWIP_AUTOIP
|
|
help
|
|
If the AUTOIP functionality detects this many IP conflicts while
|
|
self-assigning an address, it will go into a rate limited mode.
|
|
|
|
config LWIP_AUTOIP_RATE_LIMIT_INTERVAL
|
|
int "Rate limited interval (seconds)"
|
|
range 5 120
|
|
default 20
|
|
depends on LWIP_AUTOIP
|
|
help
|
|
If rate limiting self-assignment requests, wait this long between
|
|
each request.
|
|
|
|
menuconfig LWIP_NETIF_LOOPBACK
|
|
bool "Support per-interface loopback"
|
|
default y
|
|
help
|
|
Enabling this option means that if a packet is sent with a destination
|
|
address equal to the interface's own IP address, it will "loop back" and
|
|
be received by this interface.
|
|
|
|
config LWIP_LOOPBACK_MAX_PBUFS
|
|
int "Max queued loopback packets per interface"
|
|
range 0 16
|
|
default 8
|
|
depends on LWIP_NETIF_LOOPBACK
|
|
help
|
|
Configure the maximum number of packets which can be queued for
|
|
loopback on a given interface. Reducing this number may cause packets
|
|
to be dropped, but will avoid filling memory with queued packet data.
|
|
|
|
menu "TCP"
|
|
|
|
config TCP_MAXRTX
|
|
int "Maximum number of retransmissions of data segments"
|
|
default 12
|
|
range 3 12
|
|
help
|
|
Set maximum number of retransmissions of data segments.
|
|
|
|
config TCP_SYNMAXRTX
|
|
int "Maximum number of retransmissions of SYN segments"
|
|
default 6
|
|
range 3 12
|
|
help
|
|
Set maximum number of retransmissions of SYN segments.
|
|
|
|
config TCP_MSS
|
|
int "Maximum Segment Size (MSS)"
|
|
default 1436
|
|
range 1220 1436
|
|
help
|
|
Set maximum segment size for TCP transmission.
|
|
|
|
Can be set lower to save RAM, the default value 1436 will give best throughput.
|
|
|
|
config TCP_MSL
|
|
int "Maximum segment lifetime (MSL)"
|
|
default 60000
|
|
help
|
|
Set maximum segment lifetime in in milliseconds.
|
|
|
|
config TCP_SND_BUF_DEFAULT
|
|
int "Default send buffer size"
|
|
default 5744 # 4 * default MSS
|
|
range 2440 65535
|
|
help
|
|
Set default send buffer size for new TCP sockets.
|
|
|
|
Per-socket send buffer size can be changed at runtime
|
|
with lwip_setsockopt(s, TCP_SNDBUF, ...).
|
|
|
|
This value must be at least 2x the MSS size, and the default
|
|
is 4x the default MSS size.
|
|
|
|
Setting a smaller default SNDBUF size can save some RAM, but
|
|
will decrease performance.
|
|
|
|
config TCP_WND_DEFAULT
|
|
int "Default receive window size"
|
|
default 5744 # 4 * default MSS
|
|
range 2440 65535
|
|
help
|
|
Set default TCP receive window size for new TCP sockets.
|
|
|
|
Per-socket receive window size can be changed at runtime
|
|
with lwip_setsockopt(s, TCP_WINDOW, ...).
|
|
|
|
Setting a smaller default receive window size can save some RAM,
|
|
but will significantly decrease performance.
|
|
|
|
config TCP_RECVMBOX_SIZE
|
|
int "Default TCP receive mail box size"
|
|
default 6
|
|
range 6 64
|
|
help
|
|
Set TCP receive mail box size. Generally bigger value means higher throughput
|
|
but more memory. The recommended value is: TCP_WND_DEFAULT/TCP_MSS + 2, e.g. if
|
|
TCP_WND_DEFAULT=14360, TCP_MSS=1436, then the recommended receive mail box size is
|
|
(14360/1436 + 2) = 12.
|
|
|
|
TCP receive mail box is a per socket mail box, when the application receives packets
|
|
from TCP socket, LWIP core firstly posts the packets to TCP receive mail box and the
|
|
application then fetches the packets from mail box. It means LWIP can caches maximum
|
|
TCP_RECCVMBOX_SIZE packets for each TCP socket, so the maximum possible cached TCP packets
|
|
for all TCP sockets is TCP_RECCVMBOX_SIZE multiples the maximum TCP socket number. In other
|
|
words, the bigger TCP_RECVMBOX_SIZE means more memory.
|
|
On the other hand, if the receiv mail box is too small, the mail box may be full. If the
|
|
mail box is full, the LWIP drops the packets. So generally we need to make sure the TCP
|
|
receive mail box is big enough to avoid packet drop between LWIP core and application.
|
|
|
|
config TCP_QUEUE_OOSEQ
|
|
bool "Queue incoming out-of-order segments"
|
|
default y
|
|
help
|
|
Queue incoming out-of-order segments for later use.
|
|
|
|
Disable this option to save some RAM during TCP sessions, at the expense
|
|
of increased retransmissions if segments arrive out of order.
|
|
|
|
choice TCP_OVERSIZE
|
|
prompt "Pre-allocate transmit PBUF size"
|
|
default TCP_OVERSIZE_MSS
|
|
help
|
|
Allows enabling "oversize" allocation of TCP transmission pbufs ahead of time,
|
|
which can reduce the length of pbuf chains used for transmission.
|
|
|
|
This will not make a difference to sockets where Nagle's algorithm
|
|
is disabled.
|
|
|
|
Default value of MSS is fine for most applications, 25% MSS may save
|
|
some RAM when only transmitting small amounts of data. Disabled will
|
|
have worst performance and fragmentation characteristics, but uses
|
|
least RAM overall.
|
|
|
|
config TCP_OVERSIZE_MSS
|
|
bool "MSS"
|
|
config TCP_OVERSIZE_QUARTER_MSS
|
|
bool "25% MSS"
|
|
config TCP_OVERSIZE_DISABLE
|
|
bool "Disabled"
|
|
|
|
endchoice
|
|
|
|
endmenu # TCP
|
|
|
|
menu "UDP"
|
|
|
|
config UDP_RECVMBOX_SIZE
|
|
int "Default UDP receive mail box size"
|
|
default 6
|
|
range 6 64
|
|
help
|
|
Set UDP receive mail box size. The recommended value is 6.
|
|
|
|
UDP receive mail box is a per socket mail box, when the application receives packets
|
|
from UDP socket, LWIP core firstly posts the packets to UDP receive mail box and the
|
|
application then fetches the packets from mail box. It means LWIP can caches maximum
|
|
UDP_RECCVMBOX_SIZE packets for each UDP socket, so the maximum possible cached UDP packets
|
|
for all UDP sockets is UDP_RECCVMBOX_SIZE multiples the maximum UDP socket number. In other
|
|
words, the bigger UDP_RECVMBOX_SIZE means more memory.
|
|
On the other hand, if the receiv mail box is too small, the mail box may be full. If the
|
|
mail box is full, the LWIP drops the packets. So generally we need to make sure the UDP
|
|
receive mail box is big enough to avoid packet drop between LWIP core and application.
|
|
|
|
endmenu # UDP
|
|
|
|
config TCPIP_TASK_STACK_SIZE
|
|
int "TCP/IP Task Stack Size"
|
|
default 2560
|
|
# for high log levels, tcpip_adapter API calls can end up
|
|
# a few calls deep and logging there can trigger a stack overflow
|
|
range 2560 65536 if LOG_DEFAULT_LEVEL < 4 || NEWLIB_NANO_FORMAT
|
|
range 3072 65536 if LOG_DEFAULT_LEVEL >= 4 && !NEWLIB_NANO_FORMAT
|
|
help
|
|
Configure TCP/IP task stack size, used by LWIP to process multi-threaded TCP/IP operations.
|
|
Setting this stack too small will result in stack overflow crashes.
|
|
|
|
menuconfig PPP_SUPPORT
|
|
bool "Enable PPP support (new/experimental)"
|
|
default n
|
|
help
|
|
Enable PPP stack. Now only PPP over serial is possible.
|
|
|
|
PPP over serial support is experimental and unsupported.
|
|
|
|
config PPP_PAP_SUPPORT
|
|
bool "Enable PAP support"
|
|
depends on PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable Password Authentication Protocol (PAP) support
|
|
|
|
config PPP_CHAP_SUPPORT
|
|
bool "Enable CHAP support"
|
|
depends on PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable Challenge Handshake Authentication Protocol (CHAP) support
|
|
|
|
config PPP_MSCHAP_SUPPORT
|
|
bool "Enable MSCHAP support"
|
|
depends on PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable Microsoft version of the Challenge-Handshake Authentication Protocol (MSCHAP) support
|
|
|
|
config PPP_MPPE_SUPPORT
|
|
bool "Enable MPPE support"
|
|
depends on PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable Microsoft Point-to-Point Encryption (MPPE) support
|
|
|
|
config PPP_DEBUG_ON
|
|
bool "Enable PPP debug log output"
|
|
depends on PPP_SUPPORT
|
|
default n
|
|
help
|
|
Enable PPP debug log output
|
|
|
|
menu "ICMP"
|
|
|
|
config LWIP_MULTICAST_PING
|
|
bool "Respond to multicast pings"
|
|
default n
|
|
|
|
config LWIP_BROADCAST_PING
|
|
bool "Respond to broadcast pings"
|
|
default n
|
|
|
|
endmenu # ICMP
|
|
|
|
endmenu
|