1. Add an API to set Provisioner static oob value 2. Add an API to deinit BLE Mesh stack 3. Add an API to set Provisioner unicast address 4. Add an API to provision devices with fixed address 5. Add an API to store node composition data 6. Add an API to get node with device uuid 7. Add an API to get node with unicast address 8. Add an API to delete node with device uuid 9. Add an API to delete node with unicast address 10. Add an API for Provisioner to update local AppKey 11. Add an API for Provisioner to update local NetKey 12. Support Provisioner persistent functionality 13. Fix Provisioner entering IV Update procedure 14. Fix an issue which may cause client failing to send msg 15. Use bt_mesh.flags to indicate device role 16. Remove several useless macros 17. Callback RSSI of received mesh provisioning packets 18. Modify the Provisioner disable function 19. Change some log level from debug to info 20. Add parameters to Provisioner bind AppKey completion event 21. Fix node ignoring relay messages issue 22. Support using a specific partition for BLE Mesh 23. Fix compile warning when proxy related macros are disabled 24. Clean up BLE Mesh stack included header files 25. NULL can be input if client message needs no parameters 26. Fix compile warning when BT log is disabled 27. Initilize BLE Mesh stack local variables 28. Support using PSRAM for BLE Mesh mutex, queue and task 29. Add a menuconfig option to enable using memory from PSRAM 30. Clean up sdkconfig.defaults of BLE Mesh examples
416 lines
14 KiB
C
416 lines
14 KiB
C
// Copyright 2017-2019 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#ifndef _PROVISIONER_PROV_H_
|
|
#define _PROVISIONER_PROV_H_
|
|
|
|
#include "mesh_main.h"
|
|
#include "mesh_bearer_adapt.h"
|
|
|
|
#if !CONFIG_BLE_MESH_PROVISIONER
|
|
|
|
#define CONFIG_BLE_MESH_PBA_SAME_TIME 0
|
|
#define CONFIG_BLE_MESH_PBG_SAME_TIME 0
|
|
|
|
#else
|
|
|
|
#if !defined(CONFIG_BLE_MESH_PB_ADV)
|
|
#define CONFIG_BLE_MESH_PBA_SAME_TIME 0
|
|
#endif /* !CONFIG_BLE_MESH_PB_ADV */
|
|
|
|
#if !defined(CONFIG_BLE_MESH_PB_GATT)
|
|
#define CONFIG_BLE_MESH_PBG_SAME_TIME 0
|
|
#endif /* !CONFIG_BLE_MESH_PB_GATT */
|
|
|
|
#endif /* !CONFIG_BLE_MESH_PROVISIONER */
|
|
|
|
#define RM_AFTER_PROV BIT(0)
|
|
#define START_PROV_NOW BIT(1)
|
|
#define FLUSHABLE_DEV BIT(2)
|
|
|
|
struct bt_mesh_unprov_dev_add {
|
|
u8_t addr[6];
|
|
u8_t addr_type;
|
|
u8_t uuid[16];
|
|
u16_t oob_info;
|
|
u8_t bearer;
|
|
};
|
|
|
|
struct bt_mesh_device_delete {
|
|
u8_t addr[6];
|
|
u8_t addr_type;
|
|
u8_t uuid[16];
|
|
};
|
|
|
|
#define NET_IDX_FLAG BIT(0)
|
|
#define FLAGS_FLAG BIT(1)
|
|
#define IV_INDEX_FLAG BIT(2)
|
|
|
|
struct bt_mesh_prov_data_info {
|
|
union {
|
|
u16_t net_idx;
|
|
u8_t flags;
|
|
u32_t iv_index;
|
|
};
|
|
u8_t flag;
|
|
};
|
|
|
|
/* The following APIs are for primary provisioner internal use */
|
|
|
|
/**
|
|
* @brief This function decrements the current PB-GATT count.
|
|
*
|
|
* @return None
|
|
*/
|
|
void bt_mesh_provisioner_pbg_count_dec(void);
|
|
|
|
/**
|
|
* @brief This function clears the part of the link info of the proper device.
|
|
*
|
|
* @param[in] addr: Remote device address
|
|
*
|
|
* @return None
|
|
*/
|
|
void bt_mesh_provisioner_clear_link_info(const u8_t addr[6]);
|
|
|
|
/**
|
|
* @brief This function handles the received PB-ADV PDUs.
|
|
*
|
|
* @param[in] buf: Pointer to the buffer containing generic provisioning PDUs
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
void bt_mesh_provisioner_pb_adv_recv(struct net_buf_simple *buf);
|
|
|
|
/**
|
|
* @brief This function sends provisioning invite to start
|
|
* provisioning this unprovisioned device.
|
|
*
|
|
* @param[in] addr: Remote device address
|
|
* @param[in] conn: Pointer to the bt_conn structure
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_set_prov_conn(const u8_t addr[6], struct bt_mesh_conn *conn);
|
|
|
|
/**
|
|
* @brief This function sends provisioning invite to start
|
|
* provisioning this unprovisioned device.
|
|
*
|
|
* @param[in] conn: Pointer to the bt_conn structure
|
|
* @param[in] addr: Address of the connected device
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_pb_gatt_open(struct bt_mesh_conn *conn, u8_t *addr);
|
|
|
|
/**
|
|
* @brief This function resets the used information when
|
|
* related connection is terminated.
|
|
*
|
|
* @param[in] conn: Pointer to the bt_conn structure
|
|
* @param[in] reason: Connection terminated reason
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_pb_gatt_close(struct bt_mesh_conn *conn, u8_t reason);
|
|
|
|
/**
|
|
* @brief This function handles the received PB-GATT provision
|
|
* PDUs.
|
|
*
|
|
* @param[in] conn: Pointer to the bt_conn structure
|
|
* @param[in] buf: Pointer to the buffer containing provision PDUs
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_pb_gatt_recv(struct bt_mesh_conn *conn, struct net_buf_simple *buf);
|
|
|
|
/**
|
|
* @brief This function initializes provisioner's PB-GATT and PB-ADV
|
|
* related information.
|
|
*
|
|
* @param[in] prov_info: Pointer to the application-initialized provisioner info.
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_prov_init(const struct bt_mesh_prov *prov_info);
|
|
|
|
/**
|
|
* @brief This function deinitializes provisioner's PB-GATT and PB-ADV
|
|
* related information.
|
|
*
|
|
* @param[in] erase: Indicate if erasing provisioning information from flash.
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_prov_deinit(bool erase);
|
|
|
|
/**
|
|
* @brief This function parses the received unprovisioned device
|
|
* beacon advertising packets, and if checked, starts to provision this device
|
|
* using PB-ADV bearer.
|
|
*
|
|
* @param[in] buf: Pointer to the buffer containing unprovisioned device beacon
|
|
* @param[in] rssi: RSSI of the received unprovisioned device beacon
|
|
*
|
|
* @return None
|
|
*/
|
|
void bt_mesh_provisioner_unprov_beacon_recv(struct net_buf_simple *buf, s8_t rssi);
|
|
|
|
void bt_mesh_provisioner_prov_adv_ind_recv(struct net_buf_simple *buf, const bt_mesh_addr_t *addr, s8_t rssi);
|
|
|
|
/**
|
|
* @brief This function gets the bt_mesh_prov pointer.
|
|
*
|
|
* @return bt_mesh_prov pointer(prov)
|
|
*/
|
|
const struct bt_mesh_prov *bt_mesh_provisioner_get_prov_info(void);
|
|
|
|
void bt_mesh_provisoner_restore_prov_info(u16_t primary_addr, u16_t alloc_addr);
|
|
|
|
/* The following APIs are for primary provisioner application use */
|
|
|
|
/** @brief Add unprovisioned device info to unprov_dev queue
|
|
*
|
|
* @param[in] add_dev: Pointer to the structure containing the device information
|
|
* @param[in] flags: Flags indicate several operations of the device information
|
|
* - Remove device information from queue after it is provisioned (BIT0)
|
|
* - Start provisioning as soon as device is added to queue (BIT1)
|
|
* - Device can be flushed when device queue is full (BIT2)
|
|
*
|
|
* @return Zero on success or (negative) error code otherwise.
|
|
*
|
|
* @note 1. Currently address type only supports public address and static random address.
|
|
* 2. If device UUID and/or device address and address type already exist in the
|
|
* device queue, but the bearer differs from the existing one, add operation
|
|
* will also be successful and it will update the provision bearer supported by
|
|
* the device.
|
|
*/
|
|
int bt_mesh_provisioner_add_unprov_dev(struct bt_mesh_unprov_dev_add *add_dev, u8_t flags);
|
|
|
|
/** @brief Provision an unprovisioned device with fixed unicast address.
|
|
*
|
|
* @param[in] uuid: Device UUID of the unprovisioned device
|
|
* @param[in] addr: Device address of the unprovisioned device
|
|
* @param[in] addr_type: Device address type of the unprovisioned device
|
|
* @param[in] bearer: Provisioning bearer going to be used
|
|
* @param[in] oob_info: OOB info of the unprovisioned device
|
|
* @param[in] unicast_addr: Unicast address going to be allocated for the unprovisioned device
|
|
*
|
|
* @return Zero on success or (negative) error code otherwise.
|
|
*
|
|
* @note 1. Currently address type only supports public address and static random address.
|
|
* 2. Bearer must be equal to BLE_MESH_PROV_ADV or BLE_MESH_PROV_GATT
|
|
*/
|
|
int bt_mesh_provisioner_prov_device_with_addr(const u8_t uuid[16], const u8_t addr[6],
|
|
u8_t addr_type, bt_mesh_prov_bearer_t bearer,
|
|
u16_t oob_info, u16_t unicast_addr);
|
|
|
|
/** @brief Delete device from queue, reset current provisioning link and reset the node
|
|
*
|
|
* @param[in] del_dev: Pointer to the structure containing the device information
|
|
*
|
|
* @return Zero on success or (negative) error code otherwise.
|
|
*/
|
|
int bt_mesh_provisioner_delete_device(struct bt_mesh_device_delete *del_dev);
|
|
|
|
/**
|
|
* @brief This function sets a part of the device UUID for comparison before
|
|
* starting to provision the device.
|
|
*
|
|
* @param[in] offset: offset of the device UUID to be compared
|
|
* @param[in] length: length of the device UUID to be compared
|
|
* @param[in] match: value to be compared
|
|
* @param[in] prov_flag: flags indicate if uuid_match advertising packets are received, after that
|
|
* the device will be provisioned at once or reported to the application layer
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_set_dev_uuid_match(u8_t offset, u8_t length,
|
|
const u8_t *match, bool prov_flag);
|
|
|
|
/** @brief Callback for provisioner receiving advertising packet from unprovisioned devices which are
|
|
* not in the unprovisioned device queue.
|
|
*
|
|
* Report on the unprovisioned device beacon and mesh provisioning service advertising data to application layer
|
|
*
|
|
* @param addr Unprovisioned device address pointer
|
|
* @param addr_type Unprovisioned device address type
|
|
* @param dev_uuid Unprovisioned device device UUID pointer
|
|
* @param bearer Advertising packet received from PB-GATT or PB-ADV bearer
|
|
* @param adv_type Adv packet type, currently this is not used and we can use bearer to device
|
|
* the adv_type(ADV_IND or ADV_NONCONN_IND). This parameter will be used, when
|
|
* scan response data will be supported.
|
|
* @param rssi RSSI of the received advertising packet
|
|
*
|
|
*/
|
|
typedef void (*unprov_adv_pkt_cb_t)(const u8_t addr[6], const u8_t addr_type,
|
|
const u8_t adv_type, const u8_t dev_uuid[16],
|
|
u16_t oob_info, bt_mesh_prov_bearer_t bearer, s8_t rssi);
|
|
|
|
/**
|
|
* @brief This function registers the callback which notifies the application
|
|
* layer of the received mesh provisioning or unprovisioned device
|
|
* beacon advertizing packets (from devices not in the unprov device queue).
|
|
*
|
|
* @param[in] cb: Callback of the notifying adv pkts function
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_adv_pkt_cb_register(unprov_adv_pkt_cb_t cb);
|
|
|
|
/**
|
|
* @brief This function changes net_idx or flags or iv_index used in provisioning data.
|
|
*
|
|
* @param[in] info: Pointer of structure containing net_idx or flags or iv_index
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_set_prov_data_info(struct bt_mesh_prov_data_info *info);
|
|
|
|
/**
|
|
* @brief This function sets the provisioning information needed by Provisioner,
|
|
* including unicast address, IV Index, etc.
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_set_prov_info(void);
|
|
|
|
/**
|
|
* @brief This function sets the provisioning bearer type used by Provisioner.
|
|
*
|
|
* @param[in] bearers: Provisioning bearer type
|
|
* @param[in] clear: Indicate if the corresponding bearer type will be cleared
|
|
*
|
|
* @return None
|
|
*/
|
|
void bt_mesh_provisioner_set_prov_bearer(bt_mesh_prov_bearer_t bearers, bool clear);
|
|
|
|
/**
|
|
* @brief This function gets the provisioning bearer type used by Provisioner.
|
|
*
|
|
* @return Currently supported provisioning bearer type
|
|
*/
|
|
bt_mesh_prov_bearer_t bt_mesh_provisioner_get_prov_bearer(void);
|
|
|
|
/**
|
|
* @brief This function sets the Static OOB value used by Provisioner.
|
|
*
|
|
* @param[in] value: Static OOB value
|
|
* @param[in] length: Static OOB value length
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_set_static_oob_value(const u8_t *value, u8_t length);
|
|
|
|
/**
|
|
* @brief This function gets the unicast address of primary element of Provisioner.
|
|
*
|
|
* @return Unicast address of primary element of Provisioner.
|
|
*/
|
|
u16_t bt_mesh_provisioner_get_primary_elem_addr(void);
|
|
|
|
/**
|
|
* @brief This function sets the unicast address of primary element of Provisioner.
|
|
*
|
|
* @param[in] addr: unicast address of primary element
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_set_primary_elem_addr(u16_t addr);
|
|
|
|
/**
|
|
* @brief This function is called to input number/string out-put by unprovisioned device.
|
|
*
|
|
* @param[in] idx The provisioning link index
|
|
* @param[in] val Pointer of the input number/string
|
|
* @param[in] num_flag Flag indicates if it is a number or string
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_set_oob_input_data(const u8_t idx, const u8_t *val, bool num_flag);
|
|
|
|
/**
|
|
* @brief This function is called to output number/string which will be input by unprovisioned device.
|
|
*
|
|
* @param[in] idx The provisioning link index
|
|
* @param[in] num Pointer of the output number/string
|
|
* @param[in] size Size of the output number/string
|
|
* @param[in] num_flag Flag indicates if it is a number or string
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_set_oob_output_data(const u8_t idx, const u8_t *num, u8_t size, bool num_flag);
|
|
|
|
/**
|
|
* @brief This function is called to read unprovisioned device's oob public key.
|
|
*
|
|
* @param[in] idx The provisioning link index
|
|
* @param[in] pub_key_x Unprovisioned device's Public Key X
|
|
* @param[in] pub_key_y Unprovisioned device's Public Key Y
|
|
*
|
|
* @return Zero - success, otherwise - fail
|
|
*/
|
|
int bt_mesh_provisioner_read_oob_pub_key(const u8_t idx, const u8_t pub_key_x[32], const u8_t pub_key_y[32]);
|
|
|
|
/* The following APIs are for fast provisioning */
|
|
|
|
/**
|
|
* @brief This function is called to set fast_prov_flag.
|
|
*
|
|
* @param[in] enable: Enable or disable fast provisioning
|
|
*
|
|
* @return None
|
|
*/
|
|
void bt_mesh_provisioner_fast_prov_enable(bool enable);
|
|
|
|
/**
|
|
* @brief This function is called to set netkey index used for fast provisioning.
|
|
*
|
|
* @param[in] net_key: Netkey value
|
|
* @param[in] net_idx: Netkey index
|
|
*
|
|
* @return status for set netkey index msg
|
|
*/
|
|
u8_t bt_mesh_provisioner_set_fast_prov_net_idx(const u8_t *net_key, u16_t net_idx);
|
|
|
|
/**
|
|
* @brief This function is called to get netkey index used for fast provisioning.
|
|
*
|
|
* @return net_idx of fast provisioning
|
|
*/
|
|
u16_t bt_mesh_provisioner_get_fast_prov_net_idx(void);
|
|
|
|
/**
|
|
* @brief This function is called to set unicast address range used for fast provisioning.
|
|
*
|
|
* @param[in] min: Minimum unicast address
|
|
* @param[in] max: Maximum unicast address
|
|
*
|
|
* @return status for set unicast address range message
|
|
*/
|
|
u8_t bt_mesh_set_fast_prov_unicast_addr_range(u16_t min, u16_t max);
|
|
|
|
/**
|
|
* @brief This function is called to set flags & iv_index used for fast provisioning.
|
|
*
|
|
* @param[in] flags: Key refresh flag and iv update flag
|
|
* @param[in] iv_index: IV index
|
|
*
|
|
* @return None
|
|
*/
|
|
void bt_mesh_set_fast_prov_flags_iv_index(u8_t flags, u32_t iv_index);
|
|
|
|
#endif /* _PROVISIONER_PROV_H_ */
|