OVMS3-idf/components/freertos/Kconfig
Felipe Neves 73592d9bc4 spin_lock: added new spinlock interface and decoupled it from RTOS
spin_lock: cleaned-up port files and removed portmux files

components/soc: decoupled compare and set operations from FreeRTOS

soc/spinlock: filled initial implementation of spinlock refactor

It will decouple the spinlocks into separated components with not depencences of freertos
an similar interface was provided focusing the readabillity and maintenance, also
naming to spinlocks were adopted. On FreeRTOS side the legacy portMUX macros
gained a form of wrapper functions that calls the spinlocks component thus
minimizing the impact on RTOS side.

This feature aims to close IDF-967

soc/spinlock: spinlocks passed on unit test, missing test corner cases

components/compare_set: added better function namings plus minor performance optimization on spinlocks

soc/spinlock: code reordering to remove ISC C90 mix error

freertos/portmacro: gor rid of critical sections multiline macros, placed inline functions instead

soc/spinlock: improved spinlock performance from internal RAM

For cases where the spinlock is executed from IRAM, there is no
need to check where the spinlock object is placed on memory,
removing this checks caused a great improvement on performance.
2020-01-22 06:20:34 +08:00

423 lines
19 KiB
Text

menu "FreeRTOS"
config FREERTOS_UNICORE
# This config variable is also checked in the ESP32 startup code, not only in FreeRTOS.
bool "Run FreeRTOS only on first core"
default n
help
This version of FreeRTOS normally takes control of all cores of
the CPU. Select this if you only want to start it on the first core.
This is needed when e.g. another process needs complete control
over the second core.
# This invisible config value sets the value of tskNO_AFFINITY in task.h.
# Intended to be used as a constant from other Kconfig files.
# Value is (32-bit) INT_MAX.
config FREERTOS_NO_AFFINITY
hex
default 0x7FFFFFFF
choice FREERTOS_CORETIMER
prompt "Xtensa timer to use as the FreeRTOS tick source"
default FREERTOS_CORETIMER_0
help
FreeRTOS needs a timer with an associated interrupt to use as
the main tick source to increase counters, run timers and do
pre-emptive multitasking with. There are multiple timers available
to do this, with different interrupt priorities. Check
config FREERTOS_CORETIMER_0
bool "Timer 0 (int 6, level 1)"
help
Select this to use timer 0
config FREERTOS_CORETIMER_1
bool "Timer 1 (int 15, level 3)"
help
Select this to use timer 1
endchoice
config FREERTOS_OPTIMIZED_SCHEDULER
bool "Enable FreeRTOS pĺatform optimized scheduler"
depends on FREERTOS_UNICORE
default y
help
On most platforms there are instructions can speedup the ready task
searching. Enabling this option the FreeRTOS with this instructions
support will be built.
config FREERTOS_HZ
int "Tick rate (Hz)"
range 1 1000
default 100
help
Select the tick rate at which FreeRTOS does pre-emptive context switching.
config FREERTOS_ASSERT_ON_UNTESTED_FUNCTION
bool "Halt when an SMP-untested function is called"
default y
help
Some functions in FreeRTOS have not been thoroughly tested yet when moving to
the SMP implementation of FreeRTOS. When this option is enabled, these fuctions
will throw an assert().
choice FREERTOS_CHECK_STACKOVERFLOW
prompt "Check for stack overflow"
default FREERTOS_CHECK_STACKOVERFLOW_CANARY
help
FreeRTOS can check for stack overflows in threads and trigger an user function
called vApplicationStackOverflowHook when this happens.
config FREERTOS_CHECK_STACKOVERFLOW_NONE
bool "No checking"
help
Do not check for stack overflows (configCHECK_FOR_STACK_OVERFLOW=0)
config FREERTOS_CHECK_STACKOVERFLOW_PTRVAL
bool "Check by stack pointer value"
help
Check for stack overflows on each context switch by checking if
the stack pointer is in a valid range. Quick but does not detect
stack overflows that happened between context switches
(configCHECK_FOR_STACK_OVERFLOW=1)
config FREERTOS_CHECK_STACKOVERFLOW_CANARY
bool "Check using canary bytes"
help
Places some magic bytes at the end of the stack area and on each
context switch, check if these bytes are still intact. More thorough
than just checking the pointer, but also slightly slower.
(configCHECK_FOR_STACK_OVERFLOW=2)
endchoice
config FREERTOS_WATCHPOINT_END_OF_STACK
bool "Set a debug watchpoint as a stack overflow check"
default n
help
FreeRTOS can check if a stack has overflown its bounds by checking either the value of
the stack pointer or by checking the integrity of canary bytes. (See FREERTOS_CHECK_STACKOVERFLOW
for more information.) These checks only happen on a context switch, and the situation that caused
the stack overflow may already be long gone by then. This option will use the debug memory
watchpoint 1 (the second one) to allow breaking into the debugger (or panic'ing) as soon as any
of the last 32 bytes on the stack of a task are overwritten. The side effect is that using gdb, you
effectively only have one watchpoint; the 2nd one is overwritten as soon as a task switch happens.
This check only triggers if the stack overflow writes within 4 bytes of the end of the stack, rather than
overshooting further, so it is worth combining this approach with one of the other stack overflow check
methods.
When this watchpoint is hit, gdb will stop with a SIGTRAP message. When no JTAG OCD is attached, esp-idf
will panic on an unhandled debug exception.
config FREERTOS_INTERRUPT_BACKTRACE
bool "Enable backtrace from interrupt to task context"
default y
help
If this option is enabled, interrupt stack frame will be modified to
point to the code of the interrupted task as its return address.
This helps the debugger (or the panic handler) show a backtrace from
the interrupt to the task which was interrupted. This also works for
nested interrupts: higer level interrupt stack can be traced back to the
lower level interrupt.
This option adds 4 instructions to the interrupt dispatching code.
config FREERTOS_THREAD_LOCAL_STORAGE_POINTERS
int "Number of thread local storage pointers"
range 1 256
default 1
help
FreeRTOS has the ability to store per-thread pointers in the task
control block. This controls the number of pointers available.
This value must be at least 1. Index 0 is reserved for use by the pthreads API
thread-local-storage. Other indexes can be used for any desired purpose.
choice FREERTOS_ASSERT
prompt "FreeRTOS assertions"
default FREERTOS_ASSERT_FAIL_ABORT
help
Failed FreeRTOS configASSERT() assertions can be configured to
behave in different ways.
config FREERTOS_ASSERT_FAIL_ABORT
bool "abort() on failed assertions"
help
If a FreeRTOS configASSERT() fails, FreeRTOS will abort() and
halt execution. The panic handler can be configured to handle
the outcome of an abort() in different ways.
config FREERTOS_ASSERT_FAIL_PRINT_CONTINUE
bool "Print and continue failed assertions"
help
If a FreeRTOS assertion fails, print it out and continue.
config FREERTOS_ASSERT_DISABLE
bool "Disable FreeRTOS assertions"
help
FreeRTOS configASSERT() will not be compiled into the binary.
endchoice
config FREERTOS_IDLE_TASK_STACKSIZE
int "Idle Task stack size"
range 768 32768
default 1536
help
The idle task has its own stack, sized in bytes. The default size is enough for most uses. Size can be
reduced to 768 bytes if no (or simple) FreeRTOS idle hooks are used and pthread local storage or FreeRTOS
local storage cleanup callbacks are not used.
The stack size may need to be increased above the default if the app installs idle or thread local storage
cleanup hooks that use a lot of stack memory.
config FREERTOS_ISR_STACKSIZE
int "ISR stack size"
range 1536 32768
default 1536
help
The interrupt handlers have their own stack. The size of the stack can be defined here.
Each processor has its own stack, so the total size occupied will be twice this.
config FREERTOS_LEGACY_HOOKS
bool "Use FreeRTOS legacy hooks"
default n
help
FreeRTOS offers a number of hooks/callback functions that are called when a timer
tick happens, the idle thread runs etc. esp-idf replaces these by runtime registerable
hooks using the esp_register_freertos_xxx_hook system, but for legacy reasons the old
hooks can also still be enabled. Please enable this only if you have code that for some
reason can't be migrated to the esp_register_freertos_xxx_hook system.
config FREERTOS_MAX_TASK_NAME_LEN
int "Maximum task name length"
range 1 256
default 16
help
Changes the maximum task name length. Each task allocated will
include this many bytes for a task name. Using a shorter value
saves a small amount of RAM, a longer value allows more complex
names.
For most uses, the default of 16 is OK.
config FREERTOS_SUPPORT_STATIC_ALLOCATION
bool "Enable FreeRTOS static allocation API"
default n
help
FreeRTOS gives the application writer the ability to instead provide the memory
themselves, allowing the following objects to optionally be created without any
memory being allocated dynamically:
- Tasks
- Software Timers (Daemon task is still dynamic. See documentation)
- Queues
- Event Groups
- Binary Semaphores
- Counting Semaphores
- Recursive Semaphores
- Mutexes
Whether it is preferable to use static or dynamic memory allocation is dependent on
the application, and the preference of the application writer. Both methods have pros
and cons, and both methods can be used within the same RTOS application.
Creating RTOS objects using statically allocated RAM has the benefit of providing the application writer
with more control: RTOS objects can be placed at specific memory locations. The maximum RAM footprint can
be determined at link time, rather than run time. The application writer does not need to concern
themselves with graceful handling of memory allocation failures. It allows the RTOS to be used in
applications that simply don't allow any dynamic memory allocation (although FreeRTOS includes allocation
schemes that can overcome most objections).
config FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP
bool "Enable static task clean up hook"
depends on FREERTOS_SUPPORT_STATIC_ALLOCATION
default n
help
Enable this option to make FreeRTOS call the static task clean up hook when a task is deleted.
Bear in mind that if this option is enabled you will need to implement the following function::
void vPortCleanUpTCB ( void *pxTCB ) {
// place clean up code here
}
config FREERTOS_TIMER_TASK_PRIORITY
int "FreeRTOS timer task priority"
range 1 25
default 1
help
The timer service task (primarily) makes use of existing FreeRTOS features, allowing timer
functionality to be added to an application with minimal impact on the size of the application's
executable binary.
Use this constant to define the priority that the timer task will run at.
config FREERTOS_TIMER_TASK_STACK_DEPTH
int "FreeRTOS timer task stack size"
range 1536 32768
default 2048
help
The timer service task (primarily) makes use of existing FreeRTOS features, allowing timer
functionality to be added to an application with minimal impact on the size of the application's
executable binary.
Use this constant to define the size (in bytes) of the stack allocated for the timer task.
config FREERTOS_TIMER_QUEUE_LENGTH
int "FreeRTOS timer queue length"
range 5 20
default 10
help
FreeRTOS provides a set of timer related API functions. Many of these functions use a standard
FreeRTOS queue to send commands to the timer service task. The queue used for this purpose is
called the 'timer command queue'. The 'timer command queue' is private to the FreeRTOS timer
implementation, and cannot be accessed directly.
For most uses the default value of 10 is OK.
config FREERTOS_QUEUE_REGISTRY_SIZE
int "FreeRTOS queue registry size"
range 0 20
default 0
help
FreeRTOS uses the queue registry as a means for kernel aware debuggers to locate queues, semaphores,
and mutexes. The registry allows for a textual name to be associated with a queue for easy identification
within a debugging GUI. A value of 0 will disable queue registry functionality, and a value larger than 0
will specify the number of queues/semaphores/mutexes that the registry can hold.
config FREERTOS_USE_TRACE_FACILITY
bool "Enable FreeRTOS trace facility"
default n
help
If enabled, configUSE_TRACE_FACILITY will be defined as 1 in FreeRTOS.
This will allow the usage of trace facility functions such as
uxTaskGetSystemState().
config FREERTOS_USE_STATS_FORMATTING_FUNCTIONS
bool "Enable FreeRTOS stats formatting functions"
depends on FREERTOS_USE_TRACE_FACILITY
default n
help
If enabled, configUSE_STATS_FORMATTING_FUNCTIONS will be defined as 1 in
FreeRTOS. This will allow the usage of stats formatting functions such
as vTaskList().
config FREERTOS_VTASKLIST_INCLUDE_COREID
bool "Enable display of xCoreID in vTaskList"
depends on FREERTOS_USE_STATS_FORMATTING_FUNCTIONS
default n
help
If enabled, this will include an extra column when vTaskList is called
to display the CoreID the task is pinned to (0,1) or -1 if not pinned.
config FREERTOS_GENERATE_RUN_TIME_STATS
bool "Enable FreeRTOS to collect run time stats"
default n
select FREERTOS_USE_TRACE_FACILITY
select FREERTOS_USE_STATS_FORMATTING_FUNCTIONS
help
If enabled, configGENERATE_RUN_TIME_STATS will be defined as 1 in
FreeRTOS. This will allow FreeRTOS to collect information regarding the
usage of processor time amongst FreeRTOS tasks. Run time stats are
generated using either the ESP Timer or the CPU Clock as the clock
source (Note that run time stats are only valid until the clock source
overflows). The function vTaskGetRunTimeStats() will also be available
if FREERTOS_USE_STATS_FORMATTING_FUNCTIONS and
FREERTOS_USE_TRACE_FACILITY are enabled. vTaskGetRunTimeStats() will
display the run time of each task as a % of the total run time of all
CPUs (task run time / no of CPUs) / (total run time / 100 )
choice FREERTOS_RUN_TIME_STATS_CLK
prompt "Choose the clock source for run time stats"
depends on FREERTOS_GENERATE_RUN_TIME_STATS
default FREERTOS_RUN_TIME_STATS_USING_ESP_TIMER
help
Choose the clock source for FreeRTOS run time stats. Options are CPU0's
CPU Clock or the ESP Timer. Both clock sources are 32 bits. The CPU
Clock can run at a higher frequency hence provide a finer resolution
but will overflow much quicker. Note that run time stats are only valid
until the clock source overflows.
config FREERTOS_RUN_TIME_STATS_USING_ESP_TIMER
bool "Use ESP TIMER for run time stats"
help
ESP Timer will be used as the clock source for FreeRTOS run time stats.
The ESP Timer runs at a frequency of 1MHz regardless of Dynamic
Frequency Scaling. Therefore the ESP Timer will overflow in
approximately 4290 seconds.
config FREERTOS_RUN_TIME_STATS_USING_CPU_CLK
bool "Use CPU Clock for run time stats"
help
CPU Clock will be used as the clock source for the generation of run
time stats. The CPU Clock has a frequency dependent on
ESP32_DEFAULT_CPU_FREQ_MHZ and Dynamic Frequency Scaling (DFS).
Therefore the CPU Clock frequency can fluctuate between 80 to 240MHz.
Run time stats generated using the CPU Clock represents the number of
CPU cycles each task is allocated and DOES NOT reflect the amount of
time each task runs for (as CPU clock frequency can change). If the CPU
clock consistently runs at the maximum frequency of 240MHz, it will
overflow in approximately 17 seconds.
endchoice
config FREERTOS_USE_TICKLESS_IDLE
bool "Tickless idle support"
depends on PM_ENABLE
default n
help
If power management support is enabled, FreeRTOS will be able to put
the system into light sleep mode when no tasks need to run for a number
of ticks. This number can be set using FREERTOS_IDLE_TIME_BEFORE_SLEEP option.
This feature is also known as "automatic light sleep".
Note that timers created using esp_timer APIs may prevent the system from
entering sleep mode, even when no tasks need to run.
If disabled, automatic light sleep support will be disabled.
config FREERTOS_IDLE_TIME_BEFORE_SLEEP
int "Minimum number of ticks to enter sleep mode for"
depends on FREERTOS_USE_TICKLESS_IDLE
default 3
range 2 4294967295
# Minimal value is 2 because of a check in FreeRTOS.h (search configEXPECTED_IDLE_TIME_BEFORE_SLEEP)
help
FreeRTOS will enter light sleep mode if no tasks need to run for this number
of ticks.
config FREERTOS_TASK_FUNCTION_WRAPPER
bool "Enclose all task functions in a wrapper function"
depends on COMPILER_OPTIMIZATION_DEFAULT
default y
help
If enabled, all FreeRTOS task functions will be enclosed in a wrapper function.
If a task function mistakenly returns (i.e. does not delete), the call flow will
return to the wrapper function. The wrapper function will then log an error and
abort the application. This option is also required for GDB backtraces and C++
exceptions to work correctly inside top-level task functions.
config FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER
bool "Check that mutex semaphore is given by owner task"
default y
help
If enabled, assert that when a mutex semaphore is given, the task giving the
semaphore is the task which is currently holding the mutex.
config FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE
bool "Tests compliance with Vanilla FreeRTOS port*_CRITICAL calls"
default n
help
If enabled, context of port*_CRITICAL calls (ISR or Non-ISR)
would be checked to be in compliance with Vanilla FreeRTOS.
e.g Calling port*_CRITICAL from ISR context would cause assert failure
config FREERTOS_DEBUG_OCDAWARE
bool
help
Hidden option, gets selected by CONFIG_ESPxx_DEBUG_OCDAWARE
endmenu