1. add hal and low-level layer for timer group 2. add callback functions to handle interrupt 3. add timer deinit function 4. add timer spinlock take function
194 lines
6.7 KiB
C
194 lines
6.7 KiB
C
/* Application Trace to Host Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include <stdlib.h>
|
|
#include "esp_log.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "driver/timer.h"
|
|
|
|
|
|
static const char *TAG = "example";
|
|
|
|
typedef struct {
|
|
int group;
|
|
int timer;
|
|
int count;
|
|
TaskHandle_t thnd;
|
|
} example_event_data_t;
|
|
|
|
|
|
#if CONFIG_SYSVIEW_ENABLE
|
|
#if !CONFIG_USE_CUSTOM_EVENT_ID
|
|
|
|
#define SYSVIEW_EXAMPLE_SEND_EVENT_ID 0
|
|
#define SYSVIEW_EXAMPLE_WAIT_EVENT_ID 1
|
|
|
|
#define SYSVIEW_EXAMPLE_SEND_EVENT_START() SEGGER_SYSVIEW_OnUserStart(SYSVIEW_EXAMPLE_SEND_EVENT_ID)
|
|
#define SYSVIEW_EXAMPLE_SEND_EVENT_END(_val_) SEGGER_SYSVIEW_OnUserStop(SYSVIEW_EXAMPLE_SEND_EVENT_ID)
|
|
#define SYSVIEW_EXAMPLE_WAIT_EVENT_START() SEGGER_SYSVIEW_OnUserStart(SYSVIEW_EXAMPLE_WAIT_EVENT_ID)
|
|
#define SYSVIEW_EXAMPLE_WAIT_EVENT_END(_val_) SEGGER_SYSVIEW_OnUserStop(SYSVIEW_EXAMPLE_WAIT_EVENT_ID)
|
|
|
|
#else
|
|
|
|
#define SYSVIEW_EXAMPLE_SEND_EVENT_START_ID 0
|
|
#define SYSVIEW_EXAMPLE_SEND_EVENT_END_ID 1
|
|
#define SYSVIEW_EXAMPLE_WAIT_EVENT_START_ID 2
|
|
#define SYSVIEW_EXAMPLE_WAIT_EVENT_END_ID 3
|
|
#define SYSVIEW_EXAMPLE_EVENT_MAX 4
|
|
|
|
#define SYSVIEW_EXAMPLE_SEND_EVENT_START() example_sysview_event_send(SYSVIEW_EXAMPLE_SEND_EVENT_START_ID, 0)
|
|
#define SYSVIEW_EXAMPLE_SEND_EVENT_END(_val_) example_sysview_event_send(SYSVIEW_EXAMPLE_SEND_EVENT_END_ID, _val_)
|
|
#define SYSVIEW_EXAMPLE_WAIT_EVENT_START() example_sysview_event_send(SYSVIEW_EXAMPLE_WAIT_EVENT_START_ID, 0)
|
|
#define SYSVIEW_EXAMPLE_WAIT_EVENT_END(_val_) example_sysview_event_send(SYSVIEW_EXAMPLE_WAIT_EVENT_END_ID, _val_)
|
|
|
|
static void example_sysview_module_send_desc(void);
|
|
|
|
static SEGGER_SYSVIEW_MODULE s_example_sysview_module = {
|
|
.sModule = "example_sysview_module",
|
|
.NumEvents = SYSVIEW_EXAMPLE_EVENT_MAX,
|
|
.pfSendModuleDesc = example_sysview_module_send_desc,
|
|
};
|
|
|
|
static void example_sysview_module_send_desc(void)
|
|
{
|
|
SEGGER_SYSVIEW_RecordModuleDescription(&s_example_sysview_module, "Example SystemView User Module");
|
|
}
|
|
|
|
static void example_sysview_event_send(uint32_t id, uint32_t val)
|
|
{
|
|
U8 aPacket[SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32];
|
|
|
|
U8* pPayload = SEGGER_SYSVIEW_PREPARE_PACKET(aPacket);
|
|
pPayload = SEGGER_SYSVIEW_EncodeU32(pPayload, val); // Add the parameter to the packet
|
|
SEGGER_SYSVIEW_SendPacket(&aPacket[0], pPayload, s_example_sysview_module.EventOffset + id);
|
|
}
|
|
|
|
#endif
|
|
|
|
#else
|
|
|
|
#define SYSVIEW_EXAMPLE_SEND_EVENT_START()
|
|
#define SYSVIEW_EXAMPLE_SEND_EVENT_END(_val_)
|
|
#define SYSVIEW_EXAMPLE_WAIT_EVENT_START()
|
|
#define SYSVIEW_EXAMPLE_WAIT_EVENT_END(_val_)
|
|
|
|
#endif
|
|
|
|
|
|
static void example_timer_init(int timer_group, int timer_idx, uint32_t period)
|
|
{
|
|
timer_config_t config;
|
|
uint64_t alarm_val = (period * (TIMER_BASE_CLK / 1000000UL)) / 2;
|
|
|
|
config.alarm_en = 1;
|
|
config.auto_reload = 1;
|
|
config.counter_dir = TIMER_COUNT_UP;
|
|
config.divider = 2; //Range is 2 to 65536
|
|
config.intr_type = TIMER_INTR_LEVEL;
|
|
config.counter_en = TIMER_PAUSE;
|
|
/*Configure timer*/
|
|
timer_init(timer_group, timer_idx, &config);
|
|
/*Stop timer counter*/
|
|
timer_pause(timer_group, timer_idx);
|
|
/*Load counter value */
|
|
timer_set_counter_value(timer_group, timer_idx, 0x00000000ULL);
|
|
/*Set alarm value*/
|
|
timer_set_alarm_value(timer_group, timer_idx, alarm_val);
|
|
/*Enable timer interrupt*/
|
|
timer_enable_intr(timer_group, timer_idx);
|
|
}
|
|
|
|
static void example_timer_isr(void *arg)
|
|
{
|
|
example_event_data_t *tim_arg = (example_event_data_t *)arg;
|
|
|
|
if (tim_arg->thnd != NULL) {
|
|
if (tim_arg->count++ < 10) {
|
|
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
|
|
SYSVIEW_EXAMPLE_SEND_EVENT_START();
|
|
if (xTaskNotifyFromISR(tim_arg->thnd, tim_arg->count, eSetValueWithOverwrite, &xHigherPriorityTaskWoken) != pdPASS) {
|
|
ESP_EARLY_LOGE(TAG, "Failed to notify task %p", tim_arg->thnd);
|
|
} else {
|
|
SYSVIEW_EXAMPLE_SEND_EVENT_END(tim_arg->count);
|
|
if (xHigherPriorityTaskWoken == pdTRUE) {
|
|
portYIELD_FROM_ISR();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
// re-start timer
|
|
timer_group_clr_intr_status_in_isr(tim_arg->group, tim_arg->timer);
|
|
timer_group_enable_alarm_in_isr(tim_arg->group, tim_arg->timer);
|
|
}
|
|
|
|
static void example_task(void *p)
|
|
{
|
|
example_event_data_t *arg = (example_event_data_t *) p;
|
|
timer_isr_handle_t inth;
|
|
|
|
ESP_LOGI(TAG, "%p: run task", xTaskGetCurrentTaskHandle());
|
|
|
|
esp_err_t res = timer_isr_register(arg->group, arg->timer, example_timer_isr, arg, 0, &inth);
|
|
if (res != ESP_OK) {
|
|
ESP_LOGE(TAG, "%p: failed to register timer ISR", xTaskGetCurrentTaskHandle());
|
|
} else {
|
|
res = timer_start(arg->group, arg->timer);
|
|
if (res != ESP_OK) {
|
|
ESP_LOGE(TAG, "%p: failed to start timer", xTaskGetCurrentTaskHandle());
|
|
}
|
|
}
|
|
|
|
while (1) {
|
|
uint32_t event_val;
|
|
SYSVIEW_EXAMPLE_WAIT_EVENT_START();
|
|
xTaskNotifyWait(0, 0, &event_val, portMAX_DELAY);
|
|
SYSVIEW_EXAMPLE_WAIT_EVENT_END(event_val);
|
|
ESP_LOGI(TAG, "Task[%p]: received event %d", xTaskGetCurrentTaskHandle(), event_val);
|
|
}
|
|
}
|
|
|
|
void app_main(void)
|
|
{
|
|
static example_event_data_t event_data[portNUM_PROCESSORS] = {
|
|
{
|
|
.group = TIMER_GROUP_1,
|
|
.timer = TIMER_0,
|
|
},
|
|
#if CONFIG_FREERTOS_UNICORE == 0
|
|
{
|
|
.group = TIMER_GROUP_1,
|
|
.timer = TIMER_1,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
#if CONFIG_SYSVIEW_ENABLE && CONFIG_USE_CUSTOM_EVENT_ID
|
|
// Currently OpenOCD does not support requesting module info from target. So do the following...
|
|
// Wait untill SystemView module receives START command from host,
|
|
// after that data can be sent to the host using onboard API,
|
|
// so user module description does not need to be requested by OpenOCD itself.
|
|
while(!SEGGER_SYSVIEW_Started()) {
|
|
vTaskDelay(1);
|
|
}
|
|
SEGGER_SYSVIEW_RegisterModule(&s_example_sysview_module);
|
|
#endif
|
|
|
|
example_timer_init(TIMER_GROUP_1, TIMER_0, 2000);
|
|
example_timer_init(TIMER_GROUP_1, TIMER_1, 4000);
|
|
|
|
xTaskCreatePinnedToCore(example_task, "svtrace0", 2048, &event_data[0], 3, &event_data[0].thnd, 0);
|
|
ESP_LOGI(TAG, "Created task %p", event_data[0].thnd);
|
|
#if CONFIG_FREERTOS_UNICORE == 0
|
|
xTaskCreatePinnedToCore(example_task, "svtrace1", 2048, &event_data[1], 3, &event_data[1].thnd, 1);
|
|
ESP_LOGI(TAG, "Created task %p", event_data[1].thnd);
|
|
#endif
|
|
}
|