OVMS3-idf/components/driver/include/driver/dac.h
2019-09-19 18:47:15 +10:00

94 lines
2.5 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _DRIVER_DAC_H_
#define _DRIVER_DAC_H_
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include "esp_err.h"
#include "soc/dac_periph.h"
typedef enum {
DAC_CHANNEL_1 = 1, /*!< DAC channel 1 is GPIO25 */
DAC_CHANNEL_2, /*!< DAC channel 2 is GPIO26 */
DAC_CHANNEL_MAX,
} dac_channel_t;
/**
* @brief Get the gpio number of a specific DAC channel.
*
* @param channel Channel to get the gpio number
*
* @param gpio_num output buffer to hold the gpio number
*
* @return
* - ESP_OK if success
* - ESP_ERR_INVALID_ARG if channal not valid
*/
esp_err_t dac_pad_get_io_num(dac_channel_t channel, gpio_num_t *gpio_num);
/**
* @brief Set DAC output voltage.
*
* DAC output is 8-bit. Maximum (255) corresponds to VDD.
*
* @note Need to configure DAC pad before calling this function.
* DAC channel 1 is attached to GPIO25, DAC channel 2 is attached to GPIO26
*
* @param channel DAC channel
* @param dac_value DAC output value
*
* @return
* - ESP_OK success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t dac_output_voltage(dac_channel_t channel, uint8_t dac_value);
/**
* @brief DAC pad output enable
*
* @param channel DAC channel
* @note DAC channel 1 is attached to GPIO25, DAC channel 2 is attached to GPIO26
* I2S left channel will be mapped to DAC channel 2
* I2S right channel will be mapped to DAC channel 1
*/
esp_err_t dac_output_enable(dac_channel_t channel);
/**
* @brief DAC pad output disable
*
* @param channel DAC channel
* @note DAC channel 1 is attached to GPIO25, DAC channel 2 is attached to GPIO26
*/
esp_err_t dac_output_disable(dac_channel_t channel);
/**
* @brief Enable DAC output data from I2S
*/
esp_err_t dac_i2s_enable();
/**
* @brief Disable DAC output data from I2S
*/
esp_err_t dac_i2s_disable();
#ifdef __cplusplus
}
#endif
#endif /*_DRIVER_DAC_H_*/